共查询到20条相似文献，搜索用时 46 毫秒
1.
Stereo analysis of images obtained during the 2001 flyby of Comet Borrelly by NASA's Deep Space 1 (DS1) probe allows us to quantify the shape and photometric behavior of the nucleus. The shape is complex, with planar facets corresponding to the dark, mottled regions of the surface whereas the bright, smooth regions are convexly curved. The photometric as well as textural differences between these regions can be explained in terms of topography (roughness) at and below the image resolution, without invoking significant variations in single-particle properties; the material on Borrelly's surface could be quite uniform. A statistical comparison of the digital elevation models (DEMs) produced from the three highest-resolution images independently at the USGS and DLR shows that their difference standard deviation is 120 m, consistent with a matching error of 0.20 pixel (similar to reported matching accuracies for many other stereo datasets). The DEMs also show some systematic differences attributable to manual versus automatic matching. Disk-resolved photometric modeling of the nucleus using the DEM shows that bright, smooth terrains on Borrelly are similar in roughness (Hapke roughness θ=20°) to C-type asteroid Mathilde but slightly brighter and more backscattering (single-scattering albedo w=0.056, Henyey-Greenstein phase parameter g=−0.32). The dark, mottled terrain is photometrically consistent with the same particles but with roughnesses as large as 60°. Intrinsically darker material is inconsistent with the phase behavior of these regions. Many local radiance variations are clearly related to topography, and others are consistent with a topographic explanation; one need not invoke albedo variations greater than a few tens of percent to explain the appearance of Borrelly. 相似文献
2.
The NASA-JPL Deep Space 1 Mission (DS1) encountered the short-period Jupiter-family Comet 19P/Borrelly on September 22, 2001, about 8 days after perihelion. DS1's payload contained a remote-sensing package called MICAS (Miniature Integrated Camera Spectrometer) that included a 1024 square CCD and a near IR spectrometer with ∼12 nm resolution. Prior to its closest approach of 2171 km, the remote-sensing package on the spacecraft obtained 25 CCD images of the comet and 45 near-IR spectra (L. Soderblom et al., 2002, Science 296, 1087-1091). These images provided the first close-up view of a comet's nucleus sufficiently unobscured to perform quantitative photometric studies. At closest approach, corresponding to a resolution of 47 meters per pixel, the intensity of the coma was less than 1% of that of the nucleus. An unprecedented range of high solar phase angles (52-89 degrees), viewing geometries that are in general attainable only when a comet is active, enabled the first quantitative and disk resolved modeling of surface photometric physical parameters, including the single particle phase function and macroscopic roughness. The disk-integrated geometric albedo of Borrelly's nucleus is 0.029±0.006, comparable to the dark hemisphere of Iapetus, the lowest albedo C-type asteroids, and the uranian rings. The Bond albedo, 0.009±0.002, is lower than that of any Solar System object measured. Such a low value may enhance the heating of the nucleus and sublimation of volatiles, which in turn causes the albedo to decrease even further. A map of normal reflectance of Borrelly shows variations far greater than those seen on asteroids. The two main terrain types, smooth and mottled, exhibit mean normal reflectances of 0.03 and 0.022. The physical photometric parameters of Borrelly's nucleus are typical of other small dark bodies, particularly asteroids, except preliminary modeling results indicate its regolith may be substantially fluffier. The nucleus exhibits significant variations in macroscopic roughness, with the oldest, darkest terrain being slightly smoother. This result suggests the infilling of low-lying areas with dust and particles that have not been able to leave the comet. The surface of the comet is backscattering, but there are significant variations in the single particle phase function. One region exhibits a flat particle phase function between solar phase angles of 50° and 75° (like cometary dust and unlike planetary surfaces), suggesting that its regolith is controlled by native dust rather than by meteoritic bombardment. 相似文献
3.
The flyby of the nucleus of the Comet 19P/Borrelly by the Deep Space 1 spacecraft produced the best views to date of the surface of these interesting objects. It transformed Borrelly from an astronomical object shrouded in coma of gas and dust into a geological object with complex surface processes and a rich history of erosion and landform evolution. Based on analysis of the highest resolution images, stereo images, photometry, and albedo we have mapped four major morphological units and four terrain features. The morphological units are named dark spots, mottled terrain, mesas, and smooth terrain. The features are named ridges, troughs, pits, and hills. In strong contrast to asteroids, unambiguous impact craters were not observed on Borrelly's surface. Because of the relatively short period of this comet, surface erosion by volatile sublimation is, in geologic terms, a very active process. The formation and the morphologies of units and features appear to be driven by differential rates of sublimation erosion. Erosional rates across the comet are probably controlled by solar energy input and the location of the subsolar point during perihelion. Differences in energy input may produce different varieties of sublimation erosional landforms. The terrains on Borrelly suggest that solar energy input could map directly into erosional processes and landforms. 相似文献
4.
The highest resolution images of Comet 19P/Borrelly show many dark features which, upon casual inspection, appear to be low albedo markings, but which may also be shadows or other photometric variations caused by a depression in the local topography. In order to distinguish between these two possible interpretations we conducted a photometric analysis of three of the most prominent of these features using six of the highest quality images from the September 22, 2001 Deep Space 1 (DS1) flyby. We find that: 1. The radiance in the darkest parts of each feature increases as phase angle decreases, similarly to the radiance behavior of the higher albedo surrounding terrain. The dark features could be either fully illuminated low albedo spots or, alternatively, they could be depressions. No part of any of the three regions was in full shadow. 2. One of the regions has a radiance profile consistent with a rimmed depression, the second, with a simple depression with no rim, and the third with a low albedo spot. 3. The regolith particles are backscattering and carbon black is one of the few candidate regolith materials that might explain this low albedo. We conclude that Borrelly's surface is geologically complex to the limit of resolution of the images with a combination complex topography, pits, troughs, peaks and ridges, and some very dark albedo markings, perhaps a factor of two to three darker than the average 3-4% albedo of the surrounding terrains. Our technique utilizing measured radiance profiles through the dark regions is able to discriminate between rimmed depressions, rimless depressions and simple albedo changes not associated with topography. 相似文献
5.
Photometric analysis and disk-resolved thermal modeling of Comet 19P/Borrelly from Deep Space 1 data
Images returned from the Deep Space 1 (DS-1) spacecraft during its encounter with Comet 19P/Borrelly are used to study its disk-integrated and disk-resolved photometry and its thermal properties. A disk-integrated phase function was constructed from a combination of DS-1 images and ground-based observations, giving a geometric albedo of 0.072±0.020 and a phase slope of 0.043 mag deg−1. The shape model of Borrelly [Kirk, R.L., Howington-Kraus, E., Soderblom, L.A., Giese, B., Oberst, J., 2004a. Icarus 167, 54-69] and the ephemerides of DS-1 were used to analyze the disk-resolved photometric data with Hapke's theoretical model. It was found that the surface of Borrelly displays large photometric heterogeneities in its photometric parameters. The single-scattering albedo, w, varies by a factor of 2.5 with an average of 0.057±0.009; the asymmetry factor, g, ranges from almost isotropic (−0.1) to strongly backscattering (−0.7) with an average of −0.43±0.07; the roughness parameter, , is less than 35° for most parts of surface but ranges up to 55° in some areas. Its average is 22°±5°. The observed 1-D temperature profile is modeled well by the standard thermal model (STM) for inactive regions and is found to be consistent with a very low thermal inertia. Water sublimation in the source region of the fan jet is observed to decrease the surface temperature from the STM predictions by 20-40 K. The source areas of two collimated jets could not be determined from either photometric model or thermal model. It is evident that the fan jet activity occurring on Borrelly's surface can be correlated to areas of relatively high albedo, weak backscattering, and high roughness. 相似文献
6.
The disk-resolved flyby images of the nucleus of Comet 81P/Wild 2 collected by Stardust are used to perform a detailed study of the photometric properties of this cometary nucleus. A disk-integrated phase function from phase angle 11° to about 100° is measured and modeled. A phase slope of 0.0513 ± 0.0002 mag/deg is found, with a V-band absolute magnitude of 16.29 ± 0.02. Hapke’s photometric model yields a single-scattering albedo of 0.034, an asymmetry factor of phase function −0.53, a geometric albedo 0.059, and a V-band absolute magnitude of 16.03 ± 0.07. Disk-resolved photometric modeling from both the Hapke model and the Minnaert model results in 11% model RMS, indicating small photometric variations. The roughness parameter is modeled to be 27 ± 5° from limb-darkening profile. The modeled single-scattering albedo and asymmetry factor of the phase function are 0.038 ± 0.004 and −0.52 ± 0.04, respectively, consistent with those from disk-integrated phase function. The bulk photometric properties of the nucleus of Wild 2 are comparable with those of other cometary nuclei. The photometric variations on the surface of the nucleus of Wild 2 are at a level of or smaller than 15%, much smaller than those on the nucleus of Comet 19P/Borrelly and comparable or smaller than those on the nucleus of Comet 9P/Tempel 1. The similar photometric parameters of the nuclei of Wild 2, Tempel 1, and the non-source areas of fan jets on Borrelly may reflect the typical photometric properties of the weakly active surfaces on cometary nuclei. 相似文献
7.
During the last two minutes before closest approach of Deep Space 1 to Comet 19P/Borrelly, a long exposure was made with the short-wavelength infrared (SWIR) imaging spectrometer. The observation yielded 46 spectra covering 1.3-2.6 μm; the footprint of each spectrum was ∼160 m × width of the nucleus. Borrelly's highly variegated and extremely dark 8-km-long nucleus exhibits a strong red slope in its short-wavelength infrared reflection spectrum. This slope is equivalent to J-K and H-K colors of ∼0.82 and ∼0.43, respectively. Between 2.3-2.6 μm thermal emission is clearly detectable in most of the spectra. These data show the nucleus surface to be hot and dry; no trace of H2O ice was detected. The surface temperature ranged continuously across the nucleus from ?300 K near the terminator to a maximum of ∼340 K, the expected sub-solar equilibrium temperature for a slowly rotating body. A single absorption band at ∼2.39 μm is quite evident in all of the spectra and resembles features seen in nitrogen-bearing organic molecules that are reasonable candidates for compositional components of cometary nuclei. However as of yet the source of this band is unknown. 相似文献
8.
Boice D. C. Soderblom L. A. Britt D. T. Brown R. H. Sandel B. R. Yelle R. V. Buratti B. J. Hicks Nelson Rayman Oberst J. Thomas N. 《Earth, Moon, and Planets》2000,89(1-4):301-324
NASA's Deep Space 1 (DS1) spacecraft successfully encountered comet 19P/Borrelly near perihelion and the Miniature Integrated Camera and Spectrometer (MICAS) imaging system onboard DS1 returned the first high-resolution images of a Jupiter-family comet nucleus and surrounding environment. The images span solar phase angles from 88° to 52°, providing stereoscopic coverage of the dust coma and nucleus. Numerous surface features are revealed on the 8-km long nucleus in the highest resolution images(47–58 m pixel). A smooth, broad basin containing brighter regions and mesa-likestructures is present in the central part of the nucleus that seems to be the source ofjet-like dust features seen in the coma. High ridges seen along the jagged terminator lead to rugged terrain on both ends of the nucleus containing dark patches and smaller series of parallel grooves. No evidence of impact craters with diameters larger thanabout 200-m are present, indicating a young and active surface. The nucleus is very dark with albedo variations from 0.007 to 0.035. Short-wavelength, infrared spectra from 1.3 to 2.6 μm revealed a hot, dry surface consistent with less than about10% actively sublimating. Two types of dust features are seen: broad fans and highlycollimated “jets” in the sunward hemisphere that can be traced to the surface. The source region of the main jet feature, which resolved into at least three smaller “jets” near the surface, is consistent with an area around the rotation pole that is constantly illuminated by the sun during the encounter. Within a few nuclear radii, entrained dustis rapidly accelerated and fragmented and geometrical effects caused from extended source regions are present, as evidenced in radial intensity profiles centered on the jet features that show an increase in source strength with increasing cometocentric distance. Asymmetries in the dust from dayside to nightside are pronounced and may show evidence of lateral flow transporting dust to structures observed in the nightside coma. A summary of the initial results of the Deep Space 1 Mission is provided, highlighting the new knowledge that has been gained thus far. 相似文献
9.
Surface morphology and related issues for nuclei of three comets: Halley, Borrelly and Wild 2, are considered in the paper. Joint consideration of publications and results of our analysis of the comets’ images led to conclusions, partly new, partly repeating conclusions published by other researchers. It was found that typical for all three nuclei is the presence of rather flat areas: floors of craters and other depressions, mesas and terraces. This implies that flattening surfaces or planation is a process typical for the comet nuclei. Planation seems to work through the sublimation-driven slope collapse and retreat. This requires effective sublimation so this process should work only when a comet is close to the Sun and if on the nucleus there are starting slopes, steep and high enough to support the “long-distance” avalanching of the collapsing material. If the surface had no starting slopes, then instead of planation, the formation of pitted-and-hilly surfaces should occur. An example of this could be the mottled terrain of the Borelly nucleus. Both ways of the sublimational evolution on the nucleus surface should lead to accumulation of cometary regolith. The thickness of the degassed regolith is not known, but it is obvious that in surface depressions, including the flat-floor ones, it should be larger compared with nondepression areas. This may have implications for the in situ study of comets by the Deep Impact and Rosetta missions.Our morphological analysis puts constraints on the applicability of the popular “rubble-pile comet nucleus” hypothesis (Weissman, 1986. Are cometery nuclei primordial rubble piles? Nature 320, 242-244.). We believe that the rubble pile hypothesis can be applicable to the blocky Halley nucleus. The Borelly and Wild 2 nuclei also could be rubble piles. But in these cases the “rubbles” have to be either smaller than 30-50 m (a requirement to keep lineament geometry close to ideal), or larger than 1-2 km (a requirement to form the rather extended smooth, flat surfaces of mesa tops and crater floors). Another option is that the Borelly and Wild 2 nuclei are not rubble piles.In relation to surface morphology we suggest that three end-member types of the comet nuclei may exist: (1) impact cratered “pristine” bodies, (2) non-cratered fragments of catastrophic disruption, and (3) highly Sun-ablated bodies. In this threefold classification, the Wild 2 nucleus is partially ablated primarily cratered body. Borrelly is significantly ablated and could be either primarily cratered or not-cratered fragment. Halley is certainly partially ablated but with the available images it is difficult to say if remnants of impact craters do exist on it.Recently published observations and early results of analysis of the Tempel 1 nucleus images taken by Deep Impact mission are in agreement with our conclusions on the processes responsible for the Halley, Borrelly and Wild 2 nuclei morphologies. In particular, we have now more grounds to suggest that decrease in crater numbers and increase of the role of smooth flat surfaces in the sequence Wild 2?Tempel 1?Borelli reflects a progress in the sublimational degradation of the nucleus surface during comet passages close to the Sun. 相似文献
10.
I. A. Dulova S. I. Skuratovsky N. V. Bondarenko Yu. V. Kornienko 《Solar System Research》2008,42(6):522-535
The possibility of reconstructing the surface topography from single images with the photometric method in the linear approximation is analyzed. The photometric method or surface topography Reconstruction employs a statistical approach to the problem formulation and is the most mathematically correct. This method allows determination of the most probable surface topography given specific observational data. When only one image is available, the photometric method is superior in comparison with the currently available photoclinometry. The processing of test surface topography with the photometric method shows that, under typical conditions, the error of surface relief reconstruction is of higher than 40% in terms of the standard deviation of the surface height. The surface relief of some Martian areas are reconstructed from HRSC images obtained by the Mars Express spacecraft. It is shown that the image-reconstructed surface topography is in good agreement with the topographic information for the same Martian areas obtained by the MOLA altimeter. 相似文献
11.
A mathematical theory and a corresponding algorithm have been developed to derive topographic maps from radar images as photometric arrays. Thus, as radargrammetry is to photogrammetry, so radarclinometry is to photoclinometry. Photoclinometry is endowed with a fundamental indeterminacy principle even for terrain homogeneous in normal albedo. This arises from the fact that the geometric locus of orientations of the local surface normal that is consistent with a given reflected specific-intensity of radiation is more complicated than a fixed line in space. For a radar image, the locus is a cone whose half-angle is the incidence angle and whose axis contains the radar. The indeterminacy is removed throughout a region if one possesses a control profile as a boundary-condition. In the absence of such ground-truth, a point-boundary-condition will suffice only in conjunction with a heuristic assumption, such as that the strike-line runs perpendicularly to the line-of-sight. In the present study I have implemented a more reasonable assumption which I call the hypothesis of local cylindricity.Firstly, a general theory is derived, based solely on the implicit mathematical determinacy. This theory would be directly indicative of procedure if images were completely devoid of systematic error and noise. The theory produces topography by an area integration of radar brightness, starting from a control profile, without need of additional idealistic assumptions. But we have also theorized separately a method of forming this control profile, which method does require an additional assumption about the terrain. That assumption is that the curvature properties of the terrain are locally those of a cylinder of inferable orientation, within a second-order mathematical neighborhood of every point of the terrain. While local strike-and-dip completely determine the radar brightness itself, the terrain curvature determines the brightness-gradient in the radar image. Therefore, the control profile is formed as a line integration of brightness and its local gradient starting from a single point of the terrain where the local orientation of the strike-line is estimated by eye.Secondly, and independently, the calibration curve for pixel brightness versus incidence-angle is produced. I assume that an applicable curve can be found from the literature or elsewhere so that our problem is condensed to that of properly scaling the brightness-axis of the calibration curve. A first estimate is found by equating the average image brightness to the point on the brightness axis corresponding to the complement of the effective radar depression-angle, an angle assumed given. A statistical analysis is then used to correct, on the one hand, for the fact that the average brightness is not the brightness that corresponds to the average incidence angle, as a result of the non-linearity of the calibration curve; and on the other hand, we correct for the fact that the average incidence angle is not the same for a rough surface as it is for a flat surface (and therefore not the complement of the depression angle).Lastly, the practical modifications that were interactively evolved to produce an operational algorithm for treating real data are developed. They are by no means considered optimized at present. Such a possibility is thus far precluded by excessive computer-time. Most noteworthy in this respect is the abandonment of area integration away from a control profile. Instead, the topography is produced as a set of independent line integrations down each of the parallel range lines of the image, using the theory for control-profile formation. An adaptive technique, which now appears excessive, was also employed so that SEASAT images of sand dunes could be processed. In this, the radiometric calibration was iterated to force the endpoints of each profile to zero elevation. A secondary algorithm then employed line-averages of appropriate quantities to adjust the mean tilt and the mean height of each range profile. Following this step, a sequence of fairly ordinary filtering techniques was applied to the topography. An application is shown for a Motorola image of Crazy Jug Point in the Grand Canyon. Unfortunately, a radiometric calibration curve is unavailable. But a fictitious calibration curve has provided an encouraging qualitative test of these efforts. 相似文献
12.
Data from 11 years of continuous spectroscopic observations of the active RS CVn‐type binary star EI Eridani – gained at NSO/McMath‐Pierce, KPNO/Coudé Feed and during the MUSICOS 98 campaign – were used to obtain 34 Doppler maps in three spectroscopic lines for 32 epochs, 28 of which are independent of each other. Various parameters are extracted from our Doppler maps: average temperature, fractional spottedness, and longitudinal and latitudinal spot‐occurrence functions. We find that none of these parameters show a distinct variation nor a correlation with the proposed activity cycle as seen from photometric long‐term observations. This suggests that the photometric brightness cycle may not necessarily be due to just a cool spot cycle. The general morphology of the spot pattern remains persistent over the whole period of 11 years. A large cap‐like polar spot was recovered from all our images. A high degree of variable activity was noticed near latitudes of ≈60–70° where the appendages of the polar spot emerged and dissolved (© 2009 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim) 相似文献
13.
Laramie V. POTTS Ralph R. B. von FRESE C. K. SHUM 《Meteoritics & planetary science》2002,37(9):1197-1207
Abstract— We use satellite altitude free‐air and terrain gravity correlations to differentiate regional variations in crustal viscosity and transient cavity diameters of impact basins on the Moon and Mars that we combine with surface roughness for a rheological assessment of the crust of Mercury. For the Moon and Mars, we separate the free‐air anomalies into terrain‐correlated and terrain‐decorrelated components using the spectral properties of the free‐air and computed terrain gravity effects. Adjusting the terrain effects for the terrain‐correlated anomalies yields compensated terrain effects that we evaluate for crustal thickness variations of the impact basins. We interpret the terrain‐correlated anomalies for uncompensated elements of the crustal thickness variations that we find are strongly correlated with the distribution of basin rings from photogeologic analyses. Hence, we estimate the transient cavity diameter from the innermost diameter of the gravity‐inferred rings. Comparing these diameters with the related crustal thickness estimates clearly differentiates regional variations in the crustal rheologies. For the Moon, the analysis points to a farside crust that was significantly more rigid than the nearside crust during bombardment time. For Mars, the growth in transient cavity diameters with apparent crustal age also reflects increased viscosity due to crustal cooling. These results are also consistent with local estimates of surface roughness developed from the root‐mean‐squared topography over 64 times 64° patches centered on the basins. Hence for Mercury where gravity observations are lacking, rheological inferences on its crust may result from comparing photometric estimates of transient cavity diameter and local surface roughness with the lunar and martian estimates. These results for the Beethoven Basin, a typical multi‐ring impact feature of Mercury, suggest that the viscosity of the mercurian crust was relatively great during bombardment time. This enhanced rigidity, despite crustal temperatures that were probably much hotter than those of the Moon and Mars, may reflect an extremely dry crust for Mercury in its early development. 相似文献
14.
Veronica J. BRAY Gareth S. COLLINS Joanna V. MORGAN Paul M. SCHENK 《Meteoritics & planetary science》2008,43(12):1979-1992
Abstract— We examine the morphology of central peak craters on the Moon and Ganymede in order to investigate differences in the near‐surface properties of these bodies. We have extracted topographic profiles across craters on Ganymede using Galileo images, and use these data to compile scaling trends. Comparisons between lunar and Ganymede craters show that crater depth, wall slope and amount of central uplift are all affected by material properties. We observe no major differences between similar‐sized craters in the dark and bright terrain of Ganymede, suggesting that dark terrain does not contain enough silicate material to significantly increase the strength of the surface ice. Below crater diameters of ?12 km, central peak craters on Ganymede and simple craters on the Moon have similar rim heights, indicating comparable amounts of rim collapse. This suggests that the formation of central peaks at smaller crater diameters on Ganymede than the Moon is dominated by enhanced central floor uplift rather than rim collapse. Crater wall slope trends are similar on the Moon and Ganymede, indicating that there is a similar trend in material weakening with increasing crater size, and possibly that the mechanism of weakening during impact is analogous in icy and rocky targets. We have run a suite of numerical models to simulate the formation of central peak craters on Ganymede and the Moon. Our modeling shows that the same styles of strength model can be applied to ice and rock, and that the strength model parameters do not differ significantly between materials. 相似文献
15.
Rodger I. Thompson 《Astrophysics and Space Science》2002,281(1-2):445-448
The history of star formation in the Northern Hubble Deep Field is probed using a combination of optical and near infrared
images taken with WFPC2 and NICMOS on the Hubble Space Telescope. These images cover more than a factor of five in wavelength.
This broad wavelength coverage allows accurate photometric determinations of redshift, extinction and intrinsic spectral energy
distribution for each galaxy. From these parameters the star formation rate for each galaxy is determined by relating the
1500 angstrom flux to the net star formation rate. We then correct the rates at high redshift for the effects of surface brightness
dimming by using a standard form of the star formation intensity distribution. Our measurements show that the star formation
rate in the Northern HDF is roughly constant from a redshift of 1 through 6.
This revised version was published online in September 2006 with corrections to the Cover Date. 相似文献
16.
A. Jehl D. Baratoux S. Chevrel N. Manaud C. Rosemberg K. Gwinner H. Hoffman the HRSC Team 《Icarus》2008,197(2):403-428
Minnaert and two-term phase function Hapke models are used to describe the photometric properties of the martian surface using HRSC (High Resolution Stereo Camera) multi-angular observations acquired along the ongoing Mars-Express mission. These observations can be pieced together to derive integrated phase functions over a wide range of phase angles. The photometric diversity at 675 nm, as seen from orbit, of the martian surface properties across Gusev is depicted with seven units. Three photometric units widespread across the flanks of Apollinaris Patera flank and the floor of Gusev Crater are identified as having high single scattering albedo with rather forward scattering properties, low to intermediate macroscopic roughness and porous or not compacted powdered surface state as indicated by the opposition parameters. Another unit has the highest single scattering albedo, the smoothest surface in terms of macroscopic roughness, associated with an extremely forward scattering behavior. The opposition parameters are consistent with the presence of transparent particles in the surface powder layer. The distribution of this unit appears quite intermittent across the crater and does not seem to indicate any relationship with a given morphological structure. It may correspond to sparse areas where the structure of the surface dust layer is the most preserved. The most pronounced photometric changes are observed in three units associated with the low-albedo features corresponding to dark wind streaks. These units have a low single scattering albedo, are the most backscattering surfaces across Gusev, have a high surface roughness and present variable surface states as shown by the opposition parameters estimates, consistent with the occurrence of large grains organized in more or less packed layers. Clear differences are seen among these units in terms of opposition effect. While one exhibits typical characteristics for the opposition effect, another appears more unusual in terms of lobe width and the third suggests the occurrence of a packed/compressed/narrow size distribution powder surface. The opposition effect thus appears to play a significant role suggesting that the surface state optical properties across Gusev are strongly influenced by the porosity and packing characteristics or grain size distribution of the upper layer of the martian soil. The mapping aspect of the investigation is quite useful to get a better sense of the meaning of the observed photometric variations. Indeed, the Hapke modeling suggests that surface organization (surface roughness, packing state) is more important than the simple physical characterization of the intrinsic optical properties of the constitutive particles. Given the overall spatial patterns derived from the photometric analysis, the variations, at least for the western and central part of Gusev Crater, are likely partly driven by the prevailing wind regimes, considered to be oriented north-northwest/south-southeast and disturbing the very upper surface layer. The present photometric results agree with independent investigations based on thermal inertia, reflectance spectroscopy, in situ photometric and microscopic imaging and support the idea of a thin layer of fine-grained dust, being stripped off in the low albedo units to reveal a dark basaltic substrate comprising coarse-grained materials. 相似文献
17.
Directional infrared emission from the sunlit lunar surface is determined for the thermal meridian and as a function of observer elevation and azimuth angles at three Sun elevation angles. A study of selected mare sites at full Moon suggests that brightness temperatures are relatively insensitive to changes in certain surface parameters, such as the photometric function, emissivity, and thermophysical properties of the soil. The observed deviations from predictions for an average surface can be accounted for by changes in surface roughness.Deceased 12 January, 1971. 相似文献
18.
Joshua L. Bandfield 《Icarus》2009,202(2):414-8420
Slopes are present in martian apparent surface emissivity observations collected by the Thermal Emission Spectrometer (TES) and the Thermal Emission Imaging System (THEMIS). These slopes are attributed to misrepresenting the surface temperature, either through incorrect assumptions about the maximum emissivity of surface materials or the presumption of a uniform surface temperature within the field of view. These incorrect assumptions leave distinct characteristics in the resulting apparent emissivity data that can be used to gain a better understanding of the surface properties. Surfaces with steep slopes typically have a variable surface temperatures within the field of view that cause distinct and highly variable slopes in apparent emissivity spectra based on the observing conditions. These properties are documented on the southwestern flank of Apollinaris Patera and can be reasonably approximated by modeled data. This spectral behavior is associated with extremely rough martian surfaces and includes surfaces south of Arsia Mons and near Warrego Valles that also appear to have high slopes in high resolution images. Surfaces with low maximum values of emissivity have apparent emissivity spectra with more consistent spectral slopes that do not vary greatly based on observing conditions. This spectral surface type is documented in Terra Serenum and is consistent with associated high resolution images that do not indicate the presence of a surface significantly rougher that the surrounding terrain. 相似文献
19.
R.M. Nelson R.H. Brown B.W. Hapke W.D. Smythe L. Kamp M.D. Boryta F. Leader K.H. Baines G. Bellucci J.-P. Bibring B.J. Buratti F. Capaccioni P. Cerroni R.N. Clark M. Combes A. Coradini D.P. Cruikshank P. Drossart V. Formisano R. Jaumann Y. Langevin D.L. Matson T.B. McCord V. Mennella P.D. Nicholson B. Sicardy C. Sotin 《Planetary and Space Science》2006,54(15):1540-1551
The Visual and Infrared Mapping Spectrometer (VIMS) instrument on the Cassini Saturn Orbiter returned spectral imaging data as the spacecraft undertook six close encounters with Titan beginning 7 July, 2004. Three of these flybys each produced overlapping coverage of two distinct regions of Titan's surface. Twenty-four points were selected on approximately opposite hemispheres to serve as photometric controls. Six points were selected in each of four reflectance classes. On one hemisphere each control point was observed at three distinct phase angles. From the derived phase coefficients, preliminary normal reflectances were derived for each reflectance class. The normal reflectance of Titan's surface units at 2.0178 μm ranged from 0.079 to 0.185 for the most absorbing to the most reflective units assuming no contribution from absorbing haze. When a modest haze contribution of τ=0.1 is considered these numbers increase to 0.089–0.215. We find that the lowest three reflectance classes have comparable normal reflectance on either hemisphere. However, for the highest brightness class the normal reflectance is higher on the hemisphere encompassing longitude 14–65° compared to the same high brightness class for the hemisphere encompassing 122–156° longitude. We conclude that an albedo dichotomy observed in continental sized units on Titan is due not only to one unit having more areal coverage of reflective material than the other but the material on the brighter unit is intrinsically more reflective than the most reflective material on the other unit. This suggests that surface renewal processes are more widespread on Titan's more reflective units than on its less reflective units.
We note that one of our photometric control points has increased in reflectance by 12% relative to the surrounding terrain from July of 2004 to April and May of 2005. Possible causes of this effect include atmospheric processes such as ground fog or orographic clouds; the suggestion of active volcanism cannot be ruled out.
Several interesting circular features which resembled impact craters were identified on Titan's surface at the time of the initial Titan flyby in July of 2004. We traced photometric profiles through two of these candidate craters and attempted to fit these profiles to the photometric properties expected from model depressions. We find that the best-fit attempt to model these features as craters requires that they be unrealistically deep, approximately 70 km deep. We conclude that despite their appearance, these circular features are not craters, however, the possibility that they are palimpsests cannot be ruled out.
We used two methods to test for the presence of vast expanses of liquids on Titan's surface that had been suggested to resemble oceans. Specular reflection of sunlight would be indicative of widespread liquids on the surface; we found no evidence of this. A large liquid body should also show uniformity in photometric profile; we found the profiles to be highly variable. The lack of specular reflection and the high photometric variability in the profiles across candidate oceans is inconsistent with the presence of vast expanses of flat-lying liquids on Titan's surface. While liquid accumulation may be present as small, sub-pixel-sized bodies, or in areas of the surface which still remain to be observed by VIMS, the presence of large ocean-sized accumulations of liquids can be ruled out.
The Cassini orbital tour offers the opportunity for VIMS to image the same parts of Titan's surface repeatedly at many different illumination and observation geometries. This creates the possibility of understanding the properties of Titan's atmosphere and haze by iteratively adapting models to create a best fit to the surface reflectance properties. 相似文献
20.
Phase-ratio imagery is a new tool of qualitative photometric analyses of the upper layer of the lunar regolith, which allows the identification of natural surface structure anomalies and artificially altered regolith. We apply phase-ratio imagery to analyze the Apollo-14, -15, and -17 landing sites. This reveals photometric anomalies of ∼170 × 120 m size that are characterized by lower values of the phase-function steepness, indicating a smoothing of the surface microstructure caused by the engine jets of the landing modules. Other photometric anomalies characterized by higher phase-function slopes are the result of regolith loosening by astronaut boots and the wheels of the Modular Equipment Transporter and the Lunar Roving Vehicle. We also provide a possible explanation for the high brightness of the wheel tracks seen in on-surface images acquired at very large phase angles. 相似文献