Explicit stress–strain equations for modeling frictional materials     

Kenneth J. Xu  Martin D. Liu  Buddhima Indraratna 《Marine Georesources & Geotechnology》2018,36(6):722-734

In this paper, a comprehensive study on simulating the shearing behavior of frictional materials is performed. A set of two explicit equations, describing the relationship among the shear stress ratio and the distortional strain and the volumetric strain, are formulated independently. The equations contain three stress parameters and three strain parameters and another parameter representing the nonuniformity of stress and strain during softening. All the parameters have clear physical significance and can be determined experimentally. It is demonstrated that the proposed equations have the capacity of simulating the complicated shearing behavior of many types of frictional materials including geomaterials. The proposed equations are used to simulate the stress–strain behavior for 27 frictional materials with 98 tests. These materials include soft and stiff clays in both reconstituted and structured states, silicon sands and calcareous sands, silts, compacted fill materials, volcanic soils, decomposed granite soils, cemented soils (both artificially and naturally cemented), partially saturated soils, ballast, rocks, reinforced soils, tire chips, sugar, wheat, and rapeseed. It has been demonstrated that the proposed explicit constitutive equations have the capacity to capture accurately the shearing behavior of frictional materials both qualitatively and quantitatively. A study on model parameters has been performed.  相似文献   

A multiscale work-analysis approach for geotechnical structures     

Hao Xiong  Zhen-Yu Yin  François Nicot 《国际地质力学数值与分析法杂志》2019,43(6):1230-1250

This paper presents a second-order work analysis in application to geotechnical problems by using a novel effective multiscale approach. To abandon complicated equations involved in conventional phenomenological models, this multiscale approach employs a micromechanically-based formulation, in which only four parameters are involved. The multiscale approach makes it possible a coupling of the finite element method (FEM) and the micromechanically-based model. The FEM is used to solve the boundary value problem (BVP) while the micromechanically-based model is utilized at the Gauss point of the FEM. Then, the multiscale approach is used to simulate a three-dimensional triaxial test and a plain-strain footing. On the basis of the simulations, material instabilities are analyzed at both mesoscale and global scale. The second-order work criterion is then used to analyze the numerical results. It opens a road to interpret and understand the micromechanisms hiding behind the occurrence of failure in geotechnical issues.  相似文献   

中国古生教授学会微体古生物学分会举行代表大会和学术年会     

李家骧 《南方国土资源》1996,(4)

中国古生教授学会微体古生物学分会举行代表大会和学术年会中国古竽物学会微体古物学分会第五次会员代表大分暨第六次不术年会于１９９６年１月２４日到３０日在福州市召开。来自全国地质、石油、煤炭的和产、科研和大学的１００多位代表参加了这次大会和学术研讨。大会共...  相似文献   

Shearing flows of a dry granular material—hypoplastic constitutive theory and numerical simulations     

Chung Fang  Yongqi Wang  Kolumban Hutter 《国际地质力学数值与分析法杂志》2006,30(14):1409-1437

  相似文献   

胶东“玲珑-焦家式”金矿资源潜力与找矿   总被引：1，自引：1，他引：0  

李士先  王建收 《山东国土资源》2006,22(12):36-41

“玲珑焦家式”金矿的成岩成矿,从新太古代至中生代存在着继承性的成因关系,成矿具有长期性、多源性特点,但中生代燕山早期岩浆活动是主导成矿因素。区域化探成果显示胶东金矿直接矿源岩———郭家岭花岗岩金的丰度比原始矿源岩———早前寒武纪变质沉积岩系及侵入岩系金的丰度低1/2。郭家岭花岗岩面积在2 km2以上岩体定量估计金亏损总量与胶东金矿总量预测的资源量相当,从一个侧面展现了胶东金矿资源的潜力。望儿山金矿的找矿实践展示,焦家式金矿在1 000 m以下尚有巨大潜力,整个胶东金矿产区在3 000 m以上的资源潜力应在5000 t以上。  相似文献   

青海省沙柳河南区有色金属矿成矿物质来源及矿床成矿模式探讨     

马永铨  姜洪成 《青海国土经略》1994,(1)

本文简述了沙柳河南区有色金属矿床的基本特征。通过对成矿热液及成矿物质的来源与性质的研究,认为该矿床的成因类型为火山沉积—接触交代改造叠加型,进而探讨了该矿床的成矿模式。  相似文献   

山东龙口市大磨曲家金矿地质特征及找矿方向探讨          下载免费PDF全文

刘晓煌  耿书杰  马树江  高池兴  赵新峰 《山东国土资源》2001,17(3):69-75

大磨曲家金矿位于玲珑金矿田东风矿床主脉的NE延伸部位.矿区内已发现矿脉25条.通过对玲珑金矿田的成矿条件分析和东风矿床的综合研究,认为本区有很好的找矿前景.  相似文献   

湖北徐家山锑矿床流体包裹体特征及其意义     

沈能平  彭建堂  袁顺达  张东亮  胡瑞忠  王国强 《矿床地质》2008,27(5):570-578

文章利用激光拉曼光谱和显微测温学方法,对湖北徐家山锑矿床成矿期的石英、重晶石和方解石中的流体包裹体进行了研究。研究表明,这些矿物中的流体包裹体主要有纯液体包裹体和液体包裹体(气相 液相)2类,其液体包裹体的气相成分为H2O±CO2±N2;石英、重晶石和方解石的均一温度分别为134~258℃、154~259℃和145~230℃,主要集中于150~200℃;流体的盐度w(NaCleq)和密度分别集中于3%~6%和0.90~0.96g/cm3。流体包裹体资料揭示出该矿床为典型的中低温热液锑矿床,其成矿流体为中低温、低盐度、中等密度热液。结合H、O、Sr、Pb同位素等研究结果,进一步推断该成矿热液主要是经深部循环演化的大气降水。  相似文献   

Stability at high-pressure,elastic behaviour and pressure-induced structural evolution of CsAlSi<Subscript>5</Subscript>O<Subscript>12</Subscript>, a potential host for nuclear waste     

G. Diego Gatta  Nicola Rotiroti  Martin Fisch  Milen Kadiyski  Thomas Armbruster 《Physics and Chemistry of Minerals》2008,35(9):521-533

The elastic and structural behaviour of the synthetic zeolite CsAlSi₅O₁₂ (a = 16.753(4), b = 13.797(3) and c = 5.0235(17) Å, space group Ama2, Z = 2) were investigated up to 8.5 GPa by in situ single-crystal X-ray diffraction with a diamond anvil cell under hydrostatic conditions. No phase-transition occurs within the P-range investigated. Fitting the volume data with a third-order Birch–Murnaghan equation-of-state gives: V ₀ = 1,155(4) ų, K _T0 = 20(1) GPa and K′ = 6.5(7). The “axial moduli” were calculated with a third-order “linearized” BM-EoS, substituting the cube of the individual lattice parameter (a ³, b ³, c ³) for the volume. The refined axial-EoS parameters are: a ₀ = 16.701(44) Å, K _T0a = 14(2) GPa (β_a = 0.024(3) GPa^?1), K′ _a = 6.2(8) for the a-axis; b ₀ = 13.778(20) Å, K _T0b = 21(3) GPa (β_b = 0.016(2) GPa^?1), K′ _b = 10(2) for the b-axis; c ₀ = 5.018(7) Å, K _T0c = 33(3) GPa (β_c = 0.010(1) GPa^?1), K′ _c = 3.2(8) for the c-axis (K _T0a:K _T0b:K _T0c = 1:1.50:2.36). The HP-crystal structure evolution was studied on the basis of several structural refinements at different pressures: 0.0001 GPa (with crystal in DAC without any pressure medium), 1.58(3), 1.75(4), 1.94(6), 3.25(4), 4.69(5), 7.36(6), 8.45(5) and 0.0001 GPa (after decompression). The main deformation mechanisms at high-pressure are basically driven by tetrahedral tilting, the tetrahedra behaving as rigid-units. A change in the compressional mechanisms was observed at P ≤ 2 GPa. The P-induced structural rearrangement up to 8.5 GPa is completely reversible. The high thermo-elastic stability of CsAlSi₅O_12, the immobility of Cs at HT/HP-conditions, the preservation of crystallinity at least up to 8.5 GPa and 1,000°C in elastic regime and the extremely low leaching rate of Cs from CsAlSi₅O₁₂ allow to consider this open-framework silicate as functional material potentially usable for fixation and deposition of Cs radioisotopes.  相似文献   

河南省栾川县罗村钼矿成矿特征及找矿   总被引：2，自引：1，他引：1  

李新 《地质与勘探》2008,44(6):21-26

通过对河南省栾川县罗村钼矿区域地质背景、矿床地质特征与南泥湖、三道庄及东沟超大型钼矿的综合对比、分析、研究,总结归纳了矿区NWW构造形迹、小岩体与钼矿成矿关系、围岩对成矿的控制作用、围岩蚀变与成矿的关系、地球化学异常与钼矿床的关系等成矿特征.根据罗村钼矿的成矿特征,初步指出今后的找矿方向.  相似文献