排序方式： 共有23条查询结果，搜索用时 31 毫秒
1.
Kenneth J. Xu Martin D. Liu Buddhima Indraratna 《Marine Georesources & Geotechnology》2018,36(6):722-734
In this paper, a comprehensive study on simulating the shearing behavior of frictional materials is performed. A set of two explicit equations, describing the relationship among the shear stress ratio and the distortional strain and the volumetric strain, are formulated independently. The equations contain three stress parameters and three strain parameters and another parameter representing the nonuniformity of stress and strain during softening. All the parameters have clear physical significance and can be determined experimentally. It is demonstrated that the proposed equations have the capacity of simulating the complicated shearing behavior of many types of frictional materials including geomaterials. The proposed equations are used to simulate the stress–strain behavior for 27 frictional materials with 98 tests. These materials include soft and stiff clays in both reconstituted and structured states, silicon sands and calcareous sands, silts, compacted fill materials, volcanic soils, decomposed granite soils, cemented soils (both artificially and naturally cemented), partially saturated soils, ballast, rocks, reinforced soils, tire chips, sugar, wheat, and rapeseed. It has been demonstrated that the proposed explicit constitutive equations have the capacity to capture accurately the shearing behavior of frictional materials both qualitatively and quantitatively. A study on model parameters has been performed. 相似文献
2.
In the era of high speed trains, it is very important to ensure the stability of rail tracks under adverse conditions including the fouling of ballast. Fouling of ballast from unstable and saturated soft subgrade soil is one of the major reasons for track deterioration. The reported results of a number of large-scale laboratory experiments on the shear behaviour of ballast and fouled ballast are analysed, herein. It was observed that fines have a significant influence on the shear behaviour of ballast. Shear strength increases and dilatancy decreases with the addition of fines. In this paper, a semi-empirical mathematical model has been proposed to capture the dilatancy of ballast fouled with fines during shearing. The empirical constants a, b and c proposed in the model are a function of the fines content Void Contamination Index (VCI). The results of the model have been compared with the laboratory experiments and are found to be in good agreement. 相似文献
3.
Laboratory modelling of shear behaviour of soft joints under constant normal stiffness conditions 总被引：1，自引：0，他引：1
Shear behaviour of regular sawtooth rock joints produced from casting plaster are investigated under constant normal stiffness (CNS) conditions. Test results obtained in this investigation are also compared with the constant normal load (CNL) tests. It is observed that the peak shear stress obtained under CNL conditions always underestimates the peak shear stress corresponding to the CNS condition. Plots of shear stress against normal stress show that a nonlinear (curved) strength envelope is acceptable for soft rock joints subjected to a CNS condition, in comparison with the linear or bilinear envelopes often proposed for a CNL condition. Models proposed by Patton (1966) and Barton (1973) have also been considered for the predictions of peak shear stress of soft joints under CNS conditions. Although Patton's model is appropriate for low asperity angles, it overestimates the shear strength in the low to medium normal stress range at higher asperity angles. In contrast, while Barton's model is realistic for the CNL condition, it seems to be inappropriate for modelling the shear behaviour of soft joints under CNS conditions. The effect of infill material on the shear behaviour of the model joints is also investigated, and it is found that a small thickness of bentonite infill reduces the peak stress significantly. The peak shear stress almost approached that of the shear strength of infill when the infill thickness to asperity height ratio (t/a) reached 1.40. This paper also introduces an original, empirical shear strength envelope to account for the change in normal stress and surface degradation during CNS shearing. © Rapid Science Ltd. 1998 相似文献
4.
Summary In many parts of the world, particularly in humid tropical regions, residual soils are abundant. In this paper the suitability of a residual lateritic soil as a construction material is investigated, with respect to its strength and compaction characteristics. In comparison with other typical construction fills available in Southeast Asia, compacted lateritic soils produce excellent shear strengths and CBR values. However, the brittleness and tensile cracking of this compacted material become enhanced on the dry side of the optimum moisture content, or if excessive compaction is imparted. Nevertheless, at a moisture content of 2% wetter than the optimum, the tensile mode of failure is suppressed and the lateritic fills become ideally suited for the construction of high embankments and impervious dam cores. 相似文献
5.
B. Indraratna 《Geotechnical and Geological Engineering》1996,14(3):169-191
In Australia, colluvial soils form large terrains which are often subjected to considerable erosion and mass movement. This study presents a laboratory evaluation of the improvement effected by hydrated lime, milled blast furnace slag and fly ash on a fine grained (erosive) colluvial soil in New South Wales, Australia. Geotechnical tests were conducted to determine the compaction and consolidation characteristics and the compressive and shear strength properties of the blended and natural soil specimens. The effect of these additives on the Atterberg limits and pH levels is also investigated. As large amounts of fly ash and steel slag are produced in New South Wales, it is economically attractive to utilize these industrial by-products for ground improvement rather than employing conventional methods such as lime treatment. This study demonstrates that for the colluvial soil tested, milled slag is the most effective in terms of improving the internal friction angle of the treated soil, while lime is the most suitable for achieving the optimum compressive strength. Non-pozzolanic fly ash is found to be inappropriate as a soil improving agent. The cost of ground treatment using the various additives is also estimated and compared. 相似文献
6.
Single phase water flow through rock fractures 总被引：7，自引：0，他引：7
Flow analysis plays a major role in various geotechnical applications, and the understanding of flow mechanisms is essential for the development of a hydro-mechanical flow model suitable for underground excavations in rock. Discrete flow analysis through discontinuities is reviewed including empirical and analytical flow models. The influence of external loading on joint deformation and single-phase flow show that the surface roughness and aperture size are the prime factors influencing flow rate. Nevertheless, the idealization of natural fractures as smooth parallel plate joints is still followed in many numerical models, because of the simplicity of the cubic law when applied to fracture networks. A numerical study of water flow through a network of joints employing Universal Distinct Element Code (UDEC) is used to quantify the effects of joint orientation and external stress acting on idealized joints.It is found that, for the same joint spacing, the flow rate into an excavation depends on the boundary block size (Ab) relative to the excavation size (Ae). The inflow becomes excessive if Ab/Ae is less than 4, but becomes very small if Ab/Ae exceeds 8. 相似文献
7.
Mengmeng Lu Scott W. Sloan Buddhima Indraratna Hongwen Jing Kanghe Xie 《国际地质力学数值与分析法杂志》2016,40(11):1623-1640
Various analytical theories of consolidation for soils with vertical drains have been proposed in the past. Most conventional theories are based on a cylindrical unit cell that contains only a single vertical drain. This paper described a new analytical model where a vertical drain located at the centre (the ‘inner vertical drain’) and is surrounded by two or three vertical drains (the ‘outer vertical drains’), the number of which depends on whether the configuration is triangular or rectangular. Both types of drains are combined into a cylindrical unit cell, and the water is assumed to flow both inwards to the inner vertical drain and outwards to the outer vertical drains distributed around the circumference. The outer radial boundary of the unit cell is regarded as a permeable boundary, with a drainage capacity of two or three separate vertical drains for triangular and rectangular configurations, respectively. The smear effects and the drainage resistances for both the inner and outer vertical drains are considered in the analysis as well. In this way, the equations governing the consolidation process with multiple vertical drains are derived, and the corresponding analytical solutions are obtained for instantaneously loading, ramp loading and multi‐stage of instantaneously loading and multi‐stage of ramp loading. The present solutions are finally compared with several conventional solutions for a single vertical drain in the literature. The results show that the present model predicts the same average degree of consolidation as conventional models do, which verifies the correctness of this new model. Finally, the settlement predicted by the present solution is compared with the measured settlement from a field test at the Port of Brisbane, Australia, which shows a good agreement between them. Copyright © 2016 John Wiley & Sons, Ltd. 相似文献
8.
9.
10.
Mengmeng Lu Shanyong Wang Scott W. Sloan Buddhima Indraratna Kanghe Xie 《国际地质力学数值与分析法杂志》2015,39(1):51-62
By incorporating the nonlinear variation of a soil's compressibility and permeability during the process of consolidation, an analytical solution for the radial consolidation of vertical drains has been developed for a general time‐variable loading. The general solution was verified for the cases of instantaneous loading and ramp loading. Detailed solutions were further derived for two special loading schemes: multistage loading and preloading–unloading–reloading. The nonlinear consolidation behavior of a vertical drain subjected to these two types of loading schemes was then investigated by a parametric study. The results show that the loading rate, the ratio of the compressibility index to the permeability index (Cc/Ck), and the initial stress state have a significant influence on the consolidation rate. A smaller value of Cc/Ck, a larger initial stress, or a fast loading rate always leads to a rapid consolidation rate. During the unloading period, a negative excess pore water pressure may occur, and a slower unloading rate may reduce this negative value. Copyright © 2014 John Wiley & Sons, Ltd. 相似文献