共查询到20条相似文献，搜索用时 93 毫秒
1.
Geogrids are commonly used in railway construction for reinforcement and stabilisation. When railway ballast becomes fouled due to ballast breakage, infiltration of coal fines, dust and subgrade soil pumping, the reinforcement effect of geogrids decreases significantly. This paper presents results obtained from Discrete Element Method (DEM) to study the interface behaviour of coal-fouled ballast reinforced by geogrid subjected to direct shear testing. In this study, irregularly-shaped aggregates (ballast) were modelled by clumping together 10–20 spheres in appropriate sizes and positions. The geogrid was modelled by bonding a large number of small spheres together to form the desired grid geometry and apertures. Fouled ballast with 40% Void Contaminant Index (VCI) was modelled by injecting a predetermined number of miniature spheres into the voids of fresh ballast. A series of direct shear tests for fresh and fouled ballast reinforced by the geogrid subjected to normal shear stresses varying from 15 kPa to 75 kPa were then simulated in the DEM. The numerical results showed a good agreement the laboratory data, indicating that the DEM model is able to capture the behaviour of both fresh and coal-fouled ballast reinforced by the geogrid. The advantages of the proposed DEM model in terms of capturing the correct stress–displacement and volumetric behaviour of ballast, as well as the contact forces and strains developed in the geogrids are discussed. 相似文献
2.
Rail tracks undergo degradation owing to particle breakage and fouling of ballast by various fines including coal and subgrade soil. As the ballast becomes fouled, its strength and drainage capacity are compromised, sometimes resulting in differential settlement and reduced track stability. This paper demonstrates a continuum mechanics based framework to evaluate the detrimental effect of fines on the strength, deformation and degradation of coal-fouled ballast under monotonic loading. An elastoplastic constitutive model that considers the effect of fines content and energy consumption associated with particle breakage during shearing is presented. This multiphase constitutive model is developed within a critical state framework based on a kinematic-type yield locus and a modified stress-dilatancy approach. A general formulation for the rate of ballast breakage and coal particle breakage during triaxial shearing is presented and incorporated into the plastic flow rule to accurately predict the stress–strain response of coal-fouled ballast at various confining pressures. The behaviour of ballast at various levels of fouling is analysed and validated by experimental data. 相似文献
3.
The Effects of Fines on the Behaviour of a Sand Mixture 总被引：1，自引：0，他引：1
Ali Firat Cabalar 《Geotechnical and Geological Engineering》2011,29(1):91-100
Intergranular void ratio, e
s, can be used as an alternative indicator to assess the mechanical properties of composite matrix of coarse and fine grains.
In this paper, an intensive laboratory study of saturated coarse rotund sand and fine angular sand mixtures with various mix
ratios is investigated by a series of oedometer and direct shear tests. Oedometer tests performed on the mixtures show that
fines percentages and stress conditions affect the compression behaviours. Tests indicated that, up to a fraction of fines,
which is named as transition fines content (FCt), compression behaviour of the mixture is mainly governed by the sand grains. As the percentage of fines exceeds FCt finer grains govern the compression. Performed direct shear tests revealed that there is a relationship between the FCt and shear strength, which is harmonic with the oedometer test results. 相似文献
4.
In this paper, the non‐coaxial relation between the principal plastic strain increments and the principal stresses, which results from the internal friction in geomaterials, is analyzed, and the phenomenon of the unbalanced development of plastic flow in two conjugate directions is discussed. A non‐coaxial, unbalanced plastic flow model for Coulomb frictional materials is developed and used to determine the orientation of shear band in geomaterials. It is shown that the unbalanced index r of plastic flow has important effect on the orientation of the shear band, and the orientation determined by the conventional plastic flow theory is only a special case of the proposed model when r=0. This result soundly explains the reason that the geomaterials with the same internal friction angle and dilatancy angle can have very different shear band orientations. In addition, the difference between the intrinsic and apparent dilatancy angles is analyzed, and it is emphasized that the dilatancy angle commonly used in practice is indeed the apparent dilatancy angle. Copyright © 2010 John Wiley & Sons, Ltd. 相似文献
5.
The morpho‐mechanical behaviour of one artificial granite joint with hammered surfaces, one artificial regularly undulated joint and one natural schist joint was studied. The hammered granite joints underwent 5 cycles of direct shear under 3 normal stress levels ranging between 0.3 and 4 MPa. The regularly undulated joint underwent 10 cycles of shear under 6 normal stress levels ranging between 0.5 and 5 MPa and the natural schist replicas underwent a monotonics shear under 5 normal stress levels ranging between 0.4 and 2.4 MPa. These direct shear tests were performed using a new computer‐controlled 3D‐shear apparatus. To characterize the morphology evolution of the sheared joints, a laser sensor profilometer was used to perform surface data measurements prior to and after each shear test. Based on a new characterization of joint surface roughness viewed as a combination of primary and secondary roughness and termed by the joint surface roughness, SRs, one parameter termed ‘joint surface degradation’, Dw, has been defined to quantify the degradation of the sheared joints. Examinations of SRs and Dw prior to and after shearing indicate that the hammered surfaces are more damaged than the two other surfaces. The peak strength of hammered joint with zero‐dilatancy, therefore, significantly differs from the classical formulation of dilatant joint strength. An attempt has been made to model the peak strength of hammered joint surfaces and dilatant joints with regard to their surface degradation in the course of shearing and two peak strength criteria are proposed. Input parameters are initial morphology and initial surface roughness. For the hammered surfaces, the degradation mechanism is dominant over the phenomenon of dilatancy, whereas for a dilatant joint both mechanisms are present. A comparison between the proposed models and the experimental results indicates a relatively good agreement. In particular, compared to the well‐known shear strength criteria of Ladanyi and Archambault or Saeb, these classical criteria significantly underestimate and overestimate the observed peak strength, respectively, under low and high normal stress levels. In addition and based on our experimental investigations, we put forward a model to predict the evolution of joint morphology and the degree of degradation during the course of shearing. Degradations of the artificial undulated joint and the natural schist joint enable us to verify the proposed model with a relatively good agreement. Finally, the model of Ladanyi and Archambault dealing with the proportion of total joint area sheared through asperities, as, once again, tends to underestimate the observed degradation. Copyright © 2001 John Wiley & Sons, Ltd. 相似文献
6.
In many geotechnical systems, such as reinforced slopes and embankments, soil-structure interfaces are often unsaturated. Shear behaviour of unsaturated interfaces is strongly dependent on their matric suctions, as revealed by the results of extensive laboratory tests. So far, constitutive models for unsaturated interfaces are very limited in the literature. This paper reports a new bounding surface model for saturated and unsaturated interfaces. New formulations were developed to incorporate suction effects on the flow rule and plastic modulus. To examine the capability of the proposed model, it was applied to simulate suction- and stress-controlled direct shear tests on unsaturated soil–cement, soil–steel and soil–geotextile interfaces. Measured and computed results are well matched, demonstrating that the proposed model can well capture key features of the shear behaviour of unsaturated interfaces, including suction-dependent dilatancy, stress–strain relation and peak and critical state shear strengths. 相似文献
7.
《Geomechanics and Geoengineering》2013,8(3):179-190
Void ratio has been used as a state variable for predicting the liquefaction behaviour of soils under the critical state, sometimes also referred to as the steady state, framework. Recent publications show that void ratio may not be a good parameter for characterising sand with fines because the steady state line (or curve) in the e-log(p′) space moves downward with increase in fines content until it reaches a threshold value referred to as the threshold fines content (TFC). Recently, an alternative state variable, referred to as the equivalent granular void ratio, has been proposed to resolve this problem. To calculate this alternative state variable, an additional parameter ‘b’ is needed. This parameter ‘b’ represents the fraction of fines that actively participate in the force structure of the solid skeleton. However, predicting the ‘b’ value is problematic. This paper examines the factors affecting the ‘b’ value based on published work on binary packing. This leads to a simple semi-empirical equation for predicting the ‘b’ value based on fines size and fines content. The proposed equations were evaluated with published data sets. Then, the concept of an equivalent granular steady state line is proposed. This concept was used to predict the location of SSLs for sand with different fines content from either the SSL of clean sand or the SSL of sand with a given fines content. The predictions agree well with experimental results. 相似文献
8.
This paper presents a new approach for the development of an elastoplastic constitutive model to predict the strength and deformation behaviour of soils under general stress conditions. The proposed approach was based on characteristic stress, which considers the effect of the intermediate principal stress on the material strength. Referring to the Cam-clay model, the shear dilatancy equation, plastic potential function and hardening parameter for the developed model were all derived using the characteristic stress. The model predictions indicated that the established model could quantitatively reproduce the negative dilatancy behaviour, positive dilatancy behaviour, and three-dimensional strength properties of soils. 相似文献
9.
The progressive bond breakage of artificially cemented sands induced by shear straining was investigated through conventional isotropically consolidated drained triaxial compression tests. Sand specimens were prepared with a low degree of cementation by adopting a chemical grout. Test results were interpreted in terms of two stress–dilatancy theories for cohesive-frictional materials proposed in literature. The influence of debonding on the stress–dilatancy behaviour of cemented sands was analysed with particular emphasis on the ‘delayed dilatancy’ phenomenon. A bonding degradation curve was determined for each test relating the interparticle cohesion (c) to the magnitude of the total plastic strain vector (εd) and a bond degradation rate factor (Dc) was assessed from each curve. The maximum value of interparticle cohesion (c0) before the onset of bond degradation under shearing was found to correspond with a sharp decrease in the soil stiffness of the specimens. The influence of the effective confining stress (p′c) on both c0 and Dc parameters gathered from each test was also ascertained. 相似文献
10.
A new constitutive law for the behaviour of undrained sand subjected to dynamic loading is presented. The proposed model works for small and large strain ranges and incorporates contractive and dilative properties of the sand into the unified numerical scheme. These features allow to correctly predict liquefaction and cyclic mobility phenomena for different initial relative densities of the soil. The model has been calibrated as an element test, by using cyclic simple shear data reported in the literature. For the contractive sand behaviour a well‐known endochronic densification model has been used, whereas a plastic model with a new non‐associative flow rule is applied when the sand tends to dilate. Both dilatancy and flow rule are based on a new state parameter, associated to the stiffness degradation of the material as the shaking goes on. Also, the function that represents the rearrangement memory of the soil takes a zero value when the material dilates, in order to easily model the change in the internal structure. Proceeding along this kind of approach, liquefaction and cyclic mobility are modelled with the same constitutive law, within the framework of a bi‐dimensional FEM coupled algorithm developed in the paper. For calibration purposes, the behaviour of the soil in a cyclic simple shear test has been simulated, in order to estimate the influence of permeability, frequency of loading, and homogeneity of the shear stress field on the laboratory data. Copyright © 2006 John Wiley & Sons, Ltd. 相似文献
11.
State parameter defined using void ratio, e, and the steady-state line has been shown to be effective in predicting the undrained behaviour of sand. However, steady-state
line for sand with fines is dependent on fines content. To overcome this problem, the concept of equivalent granular void
ratio, e*, has been well investigated. However, the conversion from e to e* has been essentially a back-analysis process. A methodology for converting e to e* without the need of a back-analysis process was first presented. The concept of equivalent granular state parameter, ψ*, defined in terms of e*, and equivalent granular steady-state line was then developed. An extensive experimental study was conducted to investigate
whether ψ* can capture the effects of fines content, and thus can be used to correlate undrained behaviour of sand–fines mixtures without
the need of separately considering the effects of fines content. This study suggested that the effective stress path and deviatoric
stress–strain responses in undrained shearing can be correlated with the ψ* value at the start of undrained shearing irrespective of fines content. 相似文献
12.
The results of an extensive programme of laboratory testing on intact and reconstituted samples of a pyroclastic weak rock from the volcanic complex of the Colli Albani (Central Italy) are presented. The deposit is known as Pozzolana Nera and may be assimilated to a bonded coarse grained material. The nature of bonds and the micro‐structural features were examined by means of diffractometry, optical and electron microscopy. As bonds are made of the same constituents of grains and aggregates of grains, bond deterioration and particles breakage upon loading are indistinguishable features of the mechanical behaviour. The testing programme consisted mainly of one‐dimensional and drained and undrained triaxial compression tests in a wide range of confining pressures up to 58 MPa. As confining stress increases, the mechanical behaviour of the material changes from brittle and dilatant to ductile and contractant; for both brittle and ductile behaviour failure is associated with the formation of shear surfaces separating the sample in several parts at the end of test. The experimental stress–dilatancy relationships are compared with the classical stress–dilatancy theories for a purely frictional material and for a material with friction and cohesion between particles. The analysis of the data indicates that peak strength results from the interplay between degradation of inter‐particle bonds, increasing friction between particles and increasing rate of dilation. Copyright © 2001 John Wiley & Son, Ltd. 相似文献
13.
Results of both triaxial and direct shear tests on reinforced soil samples performed by different investigators have shown that soil dilatancy and extensibility of the reinforcements have a significant effect on the generated tension forces in the inclusions. An appropriate soil--reinforcement load transfer model, integrating the effect of soil dilatancy and reinforcement extensibility is therefore needed to adequately predict forces in the inclusions under expected working loads. This paper present a load transfer model assuming an elastoplastic strain hardening behaviour for the soil and an elastic--perfectly plastic behaviour for the reinforcement. This model is used to analyse the response of the reinforced soil material under triaxial compression loading. A companion paper present the application of this model for numerical simulations of direct shear tests on sand samples reinforced with different types of tension resisting reinforcements. The model allows an evaluation of the effect of various parameters such as mechanical characteristics and dilatancy properties of the soil, extensibility of the reinforcements, and their inclination with respect to the failure surface, on the development of resisting tensile stresses in the reinforcements. A parametric study is conducted to evaluate the effect of these parameters on the behaviour of the reinforced soil material. An attempt is also made to verify the proposed model by comparing numerical predictions with available experimental results of both triaxial and direct shear tests on reinforced soil samples. This model can be used for analysis and design of reinforced soil walls with different types of tension resisting inclusions to predict tension forces under expected working loads. 相似文献
14.
Ahmed Djafar Henni Ahmed Arab Mostefa Belkhatir A. Saaed Hamoudi Hamid Khelafi 《Arabian Journal of Geosciences》2013,6(2):297-307
This experimental study deals with the effect of the overconsolidation ratio on the monotonic undrained shear behavior of silty sand. The study is based on the undrained monotonic triaxial tests for the overconsolidation ratios (OCR?=?1, 2, 4, and 8), with different silt contents ranging from 0% to 40%. The laboratory tests were carried out at an initial relative density of Dr?=?50%. The paper is composed of two parts. The first one presents the tested soils; the second one gives an analysis of the test results and discusses the influence of the overconsolidation ratio on the shear strength of the soil. The test results indicate that the shear strength of the soil increases with the increase of the overconsolidation ratio resulting in an increase of soil dilatancy. The increase in the amount of fines from 0% to 40% increases the phase of the contractancy and consequently reducing the phase of dilatancy of the tested material 相似文献
15.
Based on mathematical modeling, the paper presents the estimation of the length of dilatancy zones developed near a free surface
during the preparation of earthquakes. An algorithm for the calculation of dilatancy zones has been developed and applied
for numerical modeling. Estimated examples of the development of near-surface dilatancy zones before the Kamchatka earthquakes
with a magnitude M = 6.7–7.8 are given. The results of the numerical experiments under the accepted assumptions solve the problem of the long-range
influence of a future earthquake source on a limited remote zone of microseismic information gathering: the model admits the
development of near-surface dilatancy zones in the vicinity of a station recording seismic noise that can trigger forerunner
anomalies. 相似文献
16.
A strain hardening model is proposed for simulation of the shear behavior of rockfills, including the non-linear stress–strain relationship, stress-dependence of stiffness, non-linear strength envelope, and particularly the shearing contraction and dilatancy. This model utilizes the Mohr–Coulomb yield criterion, which is defined by the mobilized friction angle varying with plastic octahedral shear strain. The development of Rowe’s stress dilatancy theory is reviewed, with its limitation for rockfills highlighted. A modified solution is then proposed to derive the mobilized dilatancy angle of rockfills. Compared with large-scale triaxial testing results, it has been demonstrated that this simple model is capable of predicting the shear behavior of rockfills with fair accuracy. 相似文献
17.
The present study pertains to the development of a foundation model for predicting the behavior of geosynthetic reinforcement railway track system rested on soft clay subgrade. The ballast and sub‐ballast layers have been idealized by Pasternak shear layer. The geosynthetic layer is represented by a stretched rough elastic membrane. Burger model has been used to characterize the soft clay subgrade. Numerical solutions have been obtained by adopting the finite difference scheme combined with non‐dimensioning the governing equations of the proposed model. The results confirm that the present model is quite capable of predicting the time‐dependent settlement response of geosynthetic reinforcement railway track system placed on soft clay subgrade. The surface settlement profile and mobilized tensile load of geosynthetics has been evaluated by considering variation in the wheel load, sleeper width, thickness of ballast and sub‐ballast layers and shear modulus of ballast and sub‐ballast layers. It has been observed that an increase in the sleeper width by 24% results in the reduction in central settlement and mobilized tensile load by 6.5% and 20.1%, respectively. It was found that with a 50% increase in the thickness of the ballast layer, the central settlement has decreased by 7.3% and the mobilized tension at the zone of maximum curvature has increased by 24.6%. However, with an increase in the thickness of the sub‐ballast layer, a considerable reduction in both central settlement and the mobilization of tension on geosynthetic has been noticed. The pattern of variation of settlement and mobilized tension for an increase in the shear modulus of ballast and sub‐ballast material was found to be almost similar. Copyright © 2014 John Wiley & Sons, Ltd. 相似文献
18.
19.
《Geomechanics and Geoengineering》2013,8(3):237-244
An infilled rock joint is likely to be the weakest plane in a rock mass. The presence of infill material within the joint significantly reduces the friction of the discontinuity boundaries (i.e. rock to rock contact of the joint walls). The thicker the infill, the smaller the shear strength of the rock joint. Once the infill reaches a critical thickness, the infill material governs the overall shear strength, and the joint walls (rock) play no significant role. Several models have been proposed to predict the peak shear strength of soil-infilled joints under both constant normal load (CNL) and constant normal stiffness (CNS) boundary conditions, taking into account the ratio of infill thickness (t) to the height of the joint wall asperity (a). CNS models provide a more realistic picture of the soil-infilled joint behaviour in the field. This paper presents a critical review on the existing mathematical models for predicting the shear strength of soil-infilled rock joint and verifies the normalised peak shear stress model with further laboratory investigations carried out on idealised saw-tooth rock joints at the University of Wollongong. Based on the prediction of the experimental data, the normalised peak shear stress model is slightly modified by the authors. A simplified approach for using this model in practice is presented and a new expression for prediction of dilatation at peak shear stress is suggested. 相似文献
20.
Manuela Cecconi Antonio DeSimone Claudio Tamagnini Giulia M.B. Viggiani 《国际地质力学数值与分析法杂志》2002,26(15):1531-1560
A constitutive model for granular materials is developed within the framework of strain–hardening elastoplasticity, aiming at describing some of the macroscopic effects of the degradation processes associated with grain crushing. The central assumption of the paper is that, upon loading, the frictional properties of the material are modified as a consequence of the changes in grain size distribution. The effects of these irreversible microscopic processes are described macroscopically as accumulated plastic strain. Plastic strain drives the evolution of internal variables which model phenomenologically the changes of mechanical properties induced by grain crushing by controlling the geometry of the yield locus and the direction of plastic flow. An application of the model to Pozzolana Nera is presented. The stress–dilatancy relationship observed for this material is used as a guidance for the formulation of hardening laws. One of the salient features of the proposed model is its capability of reproducing the stress–dilatancy behaviour observed in Pozzolana Nera, for which the minimum value of dilatancy always follows the maximum stress ratio experienced by the material. Copyright © 2002 John Wiley & Sons, Ltd. 相似文献