Damage assessment for submarine photoelectric composite cable under anchor impact     

《Applied Ocean Research》2018

The impact of dropped anchor on submarine photoelectric composite cables may possibly cause electrical faults, i.e. electricity and optical signal transmission failure. In order to study the impact capacity and structural impact failure mechanism, a test setup is designed originally to examine the structural and functional integrity. A detailed finite element model (FEM) is created, considering material nonlinearity and component interaction. A parametric analysis has been performed to predict the deformation of components and impact forces, under different impact velocities and collision directions. Relationships between the armor layer indentation rate and that of internal power and optical units are achieved. The impact deformation of internal entities can be evaluated intuitively by armor layer indentation. The proposed experimental and numerical methods are well correlated, suitable to assess the impact capacity of subsea power cables and assist the protection design of subsea power cables in engineering.  相似文献   

海底管道开沟机械的技术经济性能评定与选型   总被引：1，自引：0，他引：1  

张国光  顾林声 《海洋技术学报》1993,12(3):16-27

本文在对水下管道开沟机械的需求市场、实际应用和研制开发动向作深入调研的基础上，选择水下管道开沟机械特有的技术先进性、适用性、安全可靠性以及经济性评价指标，构造评价模型，对水下管道施工作业中广为应用的水力冲射开沟机械、海底管道犁、机械开沟机和土壤液化法埋管设备及其机型的技术经济性能作了较为详尽地分析对比及综合评价。在此基础上，笔者提出了水下管道开沟机械的一般选型原则和对我国海底管道开沟机械研究开发工  相似文献   

Analytical investigations on loop-manoeuvre of underwater towed cable-array system   总被引：3，自引：0，他引：3  

Srivastava Shyam Kishore  C. Ganapathy 《Applied Ocean Research》1996,18(6):353-360

The paper reports on analytical case studies on the loop manoeuvre of an underwater towed cable-array system to give an insight into the tactical aspects of their naval applications. The analytical formulation and the solution procedure adopted for this three dimensional dynamic problem is also described. The case studies have been carried out for different loop radii, tow lengths, tow speeds and truncated loops. The resulting X,Y,Z co-ordinates of the towed cable-array and tow-point tensions have been computed. Based on these results, the tow-length to loop radii ratio, leading to cable-array system looping, has been found. The values of speed reduction and turning radius, causing dangerous relaxation in tow-point tension have been worked out. After exit from the loop, the timing required for realignment of the cable-array system with the ship's heading can be obtained from plots of the results. These timings help to plan ship manoeuvres to optimise reestablishment of stable listening conditions during underwater surveillance.  相似文献   

Stability Design System of Submarine Pipelines     

Gao Yinli Yan Shuwang Wang Jinying Graduate Student  Tianjin University  Tianjin Professor  Tianjin University  Tianjin Senior Engineer  China Offshore Oil Engineering Co. 《中国海洋工程》1995,(1)

This paper introduces a stability design system of submarine pipelines. The system can provide a reasonable design procedure for users with reference to domestic and foreign methods and in the light of home engineering experience.  相似文献   

海洋专用CTD单芯电缆传输技术研究     

李红志  邓云 《海洋技术学报》2005,24(3):30-35

对单芯电缆传输这种通讯技术的原理进行了阐述;分析提出了部分电路、部件的技术指标;作为一种数据传输的手段,对单芯电缆传输技术在海洋专用CTD中的应用进行了相关论述.  相似文献   

面向GIS的线状符号开放式多元设计方案   总被引：4，自引：0，他引：4  

吴自银 《海洋通报》2003,22(1):70-76

提出一种跨越专业限制，用于快速绘制任意曲率曲线的开放式线状符号“组合配置法”设计方案，即用主干线、辅助线、辅助圆和点符号等四种子线型的有机组合描述目标线型，并详细论述了其数据结构、文件结构及子线型的实现方法。同时还提出伪码法用于解决满足国标要求的图廓整饰线，并对裁剪法作了简要阐述。上述线型设计方法已成功设计、实现并应用于“海底地形成图系统(MBChar)”，已服务于大陆架海底成图项目。  相似文献   

埕岛油田海区海底地形变化及预防措施   总被引：2，自引：2，他引：2  

仲德林  刘建立 《海岸工程》2001,20(3):14-18

综合在胜利石油管理局埕岛油田海区多年来工程测绘与地质勘察资料 ,对埕岛油田海区地形地貌特征及其变化与发育趋势进行了论述 ,同时讨论了埕岛油田海上工程中需要重视的问题以及有关的工程防护问题。  相似文献   

水动力作用下管道稳定性的试验研究   总被引：2，自引：2，他引：2  

高福平  顾小芸等 《海洋工程》2001,19(2):56-60

利用振荡流水槽在以下两种约束条件下，研究波浪作用下直接铺设于砂质海底的管道失稳临界条件：1）管道两端自由；2）管道可水平、垂直自由运动，但流动受到限制。试验结果表明，管重无量纳数G与管道失稳的临界Fr数之间大致呈线性关系，而当G超过一定数值时，管道是侧向稳定的。管道的约束条件、砂床特性和加载速度对管道稳定性均有影响。  相似文献   

Fast static correction methods for high-frequency multichannel marine seismic reflection data: A high-resolution seismic study of channel-levee systems on the Bengal Fan     

Martin Gutowski  Monika Breitzke  Volkhard Spieß 《Marine Geophysical Researches》2002,23(1):57-75

Very high-frequency marine multichannel seismic reflection data generated by small-volume air- or waterguns allow detailed, high-resolution studies of sedimentary structures of the order of one to few metres wavelength. The high-frequency content, however, requires (1) a very exact knowledge of the source and receiver positions, and (2) the development of data processing methods which take this exact geometry into account. Static corrections are crucial for the quality of very high-frequency stacked data because static shifts caused by variations of the source and streamer depths are of the order of half to one dominant wavelength, so that they can lead to destructive interference during stacking of CDP sorted traces. As common surface-consistent residual static correction methods developed for land seismic data require fixed shot and receiver locations two simple and fast techniques have been developed for marine seismic data with moving sources and receivers to correct such static shifts. The first method – called CDP static correction method – is based on a simultaneous recording of Parasound sediment echosounder and multichannel seismic reflection data. It compares the depth information derived from the first arrivals of both data sets to calculate static correction time shifts for each seismic channel relative to the Parasound water depths. The second method – called average static correction method – utilises the fact that the streamer depth is mainly controlled by bird units, which keep the streamer in a predefined depth at certain increments but do not prevent the streamer from being slightly buoyant in-between. In case of calm weather conditions these streamer bendings mainly contribute to the overall static time shifts, whereas depth variations of the source are negligible. Hence, mean static correction time shifts are calculated for each channel by averaging the depth values determined at each geophone group position for several subsequent shots. Application of both methods to data of a high-resolution seismic survey of channel-levee systems on the Bengal Fan shows that the quality of the stacked section can be improved significantly compared to stacking results achieved without preceding static corrections. The optimised records show sedimentary features in great detail, that are not visible without static corrections. Limitations only result from the sea floor topography. The CDP static correction method generally provides more coherent reflections than the average static correction method but can only be applied in areas with rather flat sea floor, where no diffraction hyperbolae occur. In contrast, the average static correction method can also be used in regions with rough morphology, but the coherency of reflections is slightly reduced compared to the results of the CDP static correction method.  相似文献   

潜艇疲劳载荷的概率模型   总被引：1，自引：0，他引：1  

黄小平  崔维成 《海洋工程》2003,21(3):18-23

探讨了建立潜艇疲劳载荷概率模型的方法，引入了正态分布和两参数威布尔分布两种概率模型。两参数威布尔分布较适合于用来描述潜艇下潜深度分布的概率特征。可根据潜艇的设计参数、任务及航行区域等因素来选取最可能的分布形式获得潜深分布密度函数。潜艇疲劳热点部位的应力(应变)幅值分布，可由应力(应变)和潜深的关系通过相应的变换得到。  相似文献