青藏铁路清水河地区路基下伏多年冻土地温变化特征研究   总被引：4，自引：2，他引：4  

李忠  汪琦  司剑峰 《工程地质学报》2006,14(1):90-95

基于埋设在青藏铁路清水河地区路基中两个断面内的共8个地温测试孔3年来的地温观测资料,研究了该地区铁路路基下伏高原多年冻土融化特征,分析了多年冻土上限的变化规律以及填筑铁路路基施工对下伏多年冻土赋存条件的影响。研究表明,由于受到填筑路基时赋存在路基填料内的热量的影响,铁路路基下伏多年冻土近地表的地温变化特征与天然地面下的多年冻土的地温变化特征有明显的不同,且向阳面与被阴面差别较大。多年冻土的上限在施工初期会有一个明显的下移沉降,随着时间的推移,虽然残存在路基中的热量逐渐消散,多年冻土上限下降会逐渐稳定。由于受到太阳辐射和路基边坡形状及融化夹层的影响,多年冻土上限会逐渐稳定,但不会在短时期内上升到天然地面下多年冻土的上限水平。  相似文献   

西昆仑山前冲断带晚新生代构造地貌特征   总被引：5，自引：0，他引：5  

潘家伟  李海兵Jerome Van Der Woerd孙知明  裴军令Laurie Barrier 司家亮 《地质通报》2007,26(10):1368-1379

在卫片解译、DEM数据处理、地形图分析与剖面制作的基础上,结合野外构造地貌考察与观测,对西昆仑山前冲断带的构造地貌特征进行了定量、半定量的研究。沿山前发育系统的水系变化、冲积扇变化、不对称背斜、大规模正断裂、不对称河流阶地等典型的构造地貌,表明这条由南向北逆冲的冲断带在扩展过程中存在着由西向东迁移的特征。冲断带的东西分段以桑株河为界,以西发育固满背斜,其构造样式为向北的逆冲伴随向南的反冲;以东发育一系列不对称的背斜,表现出明显的由南向北逆冲的特征,地表无明显的反冲构造出现。利用生长地层和河流阶地估算了西昆仑山的隆升速率:晚上新世—早更新世以来的最低隆升速率为0.21～0.25mm/a,100ka以来的隆升速率为1.5mm/a。  相似文献   

华南6月持续性致洪暴雨与孟加拉湾对流异常活跃的关系   总被引：7，自引：1，他引：7  

许晓林  徐海明  司东 《南京气象学院学报》2007,30(4):463-471

利用NCEP/NCAR再分析逐日及逐月资料、NOAA卫星观测的向外长波辐射（Outgoing Long-wave Radiation,OLR）资料、我国160站月降水资料及华南45站逐日降水资料,分析了2005年6月华南持续性致洪暴雨的发生与孟加拉湾对流异常活跃及西太平洋副热带高压演变的关系,并对华南6月有无持续性大范围暴雨年进行合成分析,结果表明华南持续性大范围暴雨发生的年份,孟加拉湾对流相对活跃,西太平洋副高强度偏强、位置偏西;反之亦然。华南6月持续性大范围暴雨发生前,孟加拉湾对流经历了一次活跃过程,同时西太平洋副高也明显经历了一次增强西伸过程。孟加拉湾对流活跃可能通过东西向垂直环流诱使西太平洋副高增强西伸,从而对华南暴雨的形成产生影响。  相似文献   

江苏省风能资源重新估算与分布研究   总被引：8，自引：6，他引：8  

黄世成  姜爱军  刘聪  陈兵 《气象科学》2007,27(4):407-412

利用1971—2000年江苏省67个台站的多气象要素资料,挑选风能资源评估的代表年,重新计算江苏省风能资源状况,发现与上世纪80年代全国风能评估结果以及90年代的评估结果有很大差异,全省风能总储量估算为3.03×1010W,实际可开发量约为0.24×1010W。风能资源在江苏沿海和海岛比较丰富,是未来开发的重点区域,而在绝大部分内陆地区风能贫乏,贫乏区占据全省的92.2%。  相似文献   

我国东部新生代玄武岩岩石化学的一些探讨   总被引：2，自引：0，他引：2       下载免费PDF全文

郑学正  从柏林  张雯华  严正 《地质科学》1978,13(3):253-264

新生代是地球上玄武质岩浆的主要活动期。在我国东部,新生代玄武岩分布也极广泛,由北往南自大兴安岭、松辽盆地经华北、苏闽浙至台湾、海南岛以及近海大陆架均有不同程度的出露。时间上从老第三纪至史期均有玄武岩喷发活动。  相似文献   

Lg Coda Q and its Relation to the Geology and Tectonics of the Middle East     

L. Cong  B. J. Mitchell 《Pure and Applied Geophysics》1998,153(2-4):563-585

—Regional seismograms were collected to image the lateral variations of Lg coda Q at 1 Hz (Q ₀?) and its frequency dependence <(eta)> in the Middle East using a back-projection method. The data include 124 vertical-component traces recorded at 10 stations during the period 1986–1996. The resulting images reveal lateral variations in both Q ₀ and <eta>. In the Turkish and Iranian Plateaus, a highly deformed and tectonically active region, Q ₀ ranges between about 150 and 300, with the lowest values occurring in western Anatolia where extremely high heat flow has been measured. The low Q ₀ values found in this region agree with those found in other tectonically active regions of the world. Throughout most of the Arabian Peninsula, a relatively stable region, Q ₀ varies between 350 and 450, being highest in the shield area and lowest in the eastern basins. All values are considerably lower than those found in most other stable regions. Low Q values throughout the Middle East may be caused by interstitial fluids that have migrated to the crust from the upper mantle, where they were probably generated by hydrothermal reactions at elevated temperatures known to occur there. Low Q ₀ values (about 250) are also found in the Oman folded zone, a region with thick sedimentary deposits. <eta> varies inversely with Q ₀ throughout most of the Middle East, with lower values (0.4–0.5) in the Arabian Peninsula and higher values (0.6–0.8) in Iran and Turkey. Q ₀ and <eta> are both low in the Oman folded zone and western Anatolia.  相似文献   

Seismic Velocity and Q Structure of the Middle Eastern Crust and Upper Mantle from Surface-wave Dispersion and Attenuation     

L. Cong  B. J. Mitchell 《Pure and Applied Geophysics》1998,153(2-4):503-538

—Observed velocities and attenuation of fundamental-mode Rayleigh waves in the period range 7–82 sec were inverted for shear-wave velocity and shear-wave Q structure in the Middle East using a two-station method. Additional information on Q structure variation within each region was obtained by studying amplitude spectra of fundamental-mode and higher-mode Rayleigh waves. We obtained models for the Turkish and Iranian Plateaus (Region 1), areas surrounding and including the Black and Caspian Seas (Region 2), and the Arabian Peninsula (Region 3). The effect of continent-ocean boundaries and mixed paths in Region 2 may lead to unrealistic features in the models obtained there. At lower crustal and upper-mantle depths, shear velocities are similar in all three regions. Shear velocities vary significantly in the uppermost 10 km of the crust, being 3.21, 2.85, and 3.39 km/s for Regions 1, 2, and 3, respectively. Q models obtained from an inversion of interstation attenuation data show that crustal shear-wave Q is highest in Region 3 and lowest in Region 1. Q’s for the upper 10 km of the crust are 63, 71, and 201 for Regions 1, 2, and 3, respectively. Crustal Q’s at 30 km depth for the three regions are about 51, 71, and 134. The lower crustal Q values contrast sharply with results from stable continental regions where shear-wave Q may reach one thousand or more. These low values may indicate that fluids reside in faults, cracks, and permeable rock at lower crustal, as well as upper crustal depths due to convergence and intense deformation at all depths in the Middle Eastern crust.  相似文献   

Lg Coda Q and its Relation to the Structure and Evolution of Continents: A Global Perspective     

B. J. Mitchell  Lianli Cong 《Pure and Applied Geophysics》1998,153(2-4):655-663

—Tomographic maps of Lg coda Q (Q ^c _Lg) variation are now available for nearly the entire African, Eurasian, South American, and Australian continents, as well as for the United States. Q ^c _Lg at 1 Hz (Q ₀) varies from less than 200 to more than 1000 and Q ^c _Lg frequency dependence (<eta>) varies between 0.0 and nearly 1.0. Q ₀ appears to increase in proportion to the length of time that has elapsed since the most recent major episode of tectonic or orogenic activity in any region. A plot of Q ₀ versus time since that activity indicates that a single Q ₀-time relation approximates most mean Q ₀ values. Those that deviate most from the trend lay in Australia, the Arabian Peninsula, and the East African rift. The increase in Q ₀ with time may be due to a continual increase in crustal shear wave Q (Q ) caused by the loss of crustal fluids and reduction of crustal permeability following tectonic or orogenic activity. Extrapolated values of Q ^c _Lg at 5 Hz (using Q ₀ and <eta> values measured at 1 Hz and assuming that <eta> is constant in all regions between 1 and 5 Hz) show a similar percentage-wise increase with times that has elapsed since the most recent activity. Other factors that can reduce Q ₀ in continental regions include thick accumulations of sediment (especially sandstone and shale of Mesozoic age and younger), severe velocity gradients at the crust-mantle transition and, possibly, lateral variations in the depth, thickness, and severity of those gradients. Severe and large increases of Q in the mid-crust of some regions can cause relatively large values of <eta>, even if the frequency dependence of Q is small.  相似文献   

广西山地风能资源开发利用可行性分析——以大容山为例     

黄梅丽  史彩霞  谭强敏  苏志 《成都信息工程学院学报》2007,22(2):247-252

利用大容山自动观测站2004年8月～2006年7月气象观测资料和容县气象站1958～2006年7月测风资料,对大容山的风能资源各参数进行了详细计算和分析,并结合预选风电场的地形地貌、交通运输、联网条件、环境保护等状况对大容山风能资源开发利用进行了可行性分析评价.结果表明：大容山年平均风速为7.2m/s,年平均风功率密度为390.8W/m^2,其风能资源丰富,且交通运输、联网、工程地质等条件较好,可选择在坡度较小的山头或山腰建设风电场,预选风电场可布置750kW的风机45台,总装机容量约为34MW.  相似文献   

11-deoxyheloside A的合成     

张雪微  王鹏  宋妮  张秀丽  王聪  李明 《中国海洋大学学报(自然科学版)》2015,(4):72-77

首次完成天然胆甾烷型皂苷11-deoxyheloside A的合成。在相转移催化的条件下,葡萄糖溴苷1与膦酸单乙酯2反应以69%的收率得到葡萄糖膦酸酯供体3;以胆甾烷苷元4为原料,经Luche还原和乙酰化反应以及三氟甲磺酸负载硅胶脱除TBDPS基团得到胆甾烷二醇10;在金催化剂的作用下,胆甾二醇10与葡萄糖膦酸酯供体3进行糖苷化反应,然后脱除酰基保护基以97%的产率完成11-deoxyheloside A的合成。  相似文献