Consistency of precipitation products over the Arabian Peninsula and interactions with soil moisture and water storage     

Youssef Wehbe  Marouane Temimi  Dawit T. Ghebreyesus  Adam Milewski  Hamid Norouzi  Elsy Ibrahim 《水文科学杂志》2018,63(3):408-425

The regional-scale consistency between four precipitation products from the GPCC, TRMM, WM, and CMORPH datasets over the Arabian Peninsula was assessed. Their macroscale relationships were inter-compared with soil moisture and total water storage (TWS) estimates from AMSR-E and GRACE. The consistency analysis was studied with multivariate statistical hypothesis testing and Pearson correlation metrics for the period from January 2000 to December 2010. The products and GRACE estimates were assessed over a representative sub-domain (United Arab Emirates) with available in situ well observations. Next, geographically temporally weighted regression (GTWR) was employed to examine the interdependencies among the peninsula’s hydrological components. The results showed GPCC-TRMM recording the highest correlation (0.85) with insignificant mean differences over more than 90% of the peninsula. The highest GTWR predictive performance of TWS (R² = 0.84) was achieved with TRMM forcing, which indicates its potential to monitor changes in TWS over the arid peninsular region.  相似文献   

Geochemical characteristics and origin of the Neoproterozoic high-K calc-alkaline granitoids in the northern part of Mandara hills,northeastern Nigeria     

Girei  Musa B.  Najime  Tavershima  Ogunleye  Paul O. 《中国地球化学学报》2020,39(3):337-354

The high-K calc-alkaline granitoids in the northern part of the Mandara Hills are part of the well-exposed post-collisional plutons in northeastern Nigeria. The calc-alkaline rock association consists of quartz monzodiorite, hornblende biotite granite, biotite granites and aplite which intruded the older basement consisting mainly of low-lying migmatitic gneisses and amphibolites during the Neoproterozoic Pan-African Orogeny. Petrological and geochemical studies have revealed the presence of hornblende, iron oxide, and metaluminous to slightly peraluminous characteristics in the granitoids which is typical of I-type granite. The granitoids are also depleted in some high field strength elements (e.g. Nb and Ta) as well as Ti. Plots of Mg# versus SiO₂ indicate that the granite was derived from partial melting of crustal sources. Lithospheric delamination at the waning stage of the Pan-African Orogeny possibly triggered upwelling of hot mafic magma from the mantle which underplated the lower crust. This, in turn, caused partial melting and magma generation at the lower to middle-crustal level. However, the peculiar geochemical characteristics of the quartz monzodiorite especially the enrichment in compatible elements such as MgO, Cr, and Ni, as well as LILE element (e.g. K, Ce, Cs, Ba, and Sr), signify that the rock formed from an enriched upper mantle source. The emplacement of high-K granites in the Madara Hill, therefore, marked an important episode of crustal reworking during the Neoproterozoic. However, further isotopic work is needed to confirm this model.

  相似文献   

Petrography and geochemistry of manganiferous rocks in the Mankwadzi area in the southern Kibi‐Winneba metavolcanic belt,Ghana: Implications for genesis of Mn formations in the Birimian of West Africa     

Kwabina Ibrahim  Frank K. Nyame  Thomas Armah  Johnson Manu  Jeff Baah‐Acheamfour  Jacob Tigme 《Island Arc》2020,29(1)

Manganiferous rocks in the Mankwadzi area in the southernmost portion of the Kibi‐Winneba metavolcanic belt, one of several Mn occurrences in the Paleoproterozoic Birimian of Ghana, are hosted in hornblende schist and amphibolite. These rocks are, in places, intruded by hornblende dyke. In outcrop, the manganiferous rocks appear to be conformable with the host schist and amphibolite, are macroscopically dark, fine‐grained and structurally massive to distinctly banded. Observed alternating light and dark occasionally macro‐folded bands suggest post‐depositional deformation of both light and dark bands. Microscopic observations revealed that the light bands are dominantly Si‐rich and the dark bands mainly of opaque minerals. Whole rock analyses of the manganiferous rocks show high contents of MnO (16.75–27.4 wt%) suggesting that the opaque minerals are likely rich in Mn. The analyzed rock samples show moderate to strong enrichments in light rare earth elements compared to heavy rare earth elements. Whereas the manganiferous rocks show perceptibly negative Eu anomaly, host hornblende schist and hornblende dyke do not. Eu anomaly in amphibolite samples is, however, uncertain as the three samples analyzed gave positive, negative and no Eu anomalies. Based on the field characteristics, microscopic and geochemical features, we suggest that the Mn occurrence in the Mankwadzi area originated via sedimentary deposition and was later modified by metamorphism, hydrothermal and/or supergene processes similar to manganiferous occurrences at Nsuta and Tambao in the Birimian of West Africa.  相似文献   

Inversion-based deblending using migration operators     

Amr Ibrahim  Daniel Trad 《Geophysical Prospecting》2020,68(8):2459-2470

In this paper, we compare the denoising- and inversion-based deblending methods using Stolt migration operators. We use Stolt operator as a kernel to efficiently compute apex-shifted hyperbolic Radon transform. Sparsity promoting transforms, such as Radon transform, can focus seismic data into a sparse model to separate signals, remove noise or interpolate missing traces. Therefore, Radon transforms are a suitable tool for either the denoising- or the inversion-based deblending methods. The denoising-based deblending treats blending interferences as random noise by sorting the data into new gathers, such as common receiver gather. In these gathers, blending interferences exhibit random structures due to the randomization of the source firing times. Alternatively, the inversion-based deblending treats blending interferences as a signal, and the transform models this signal by incorporating the blending operator to formulate an inversion problem. We compare both methods using a robust inversion algorithm with sparse regularization. Results of synthetic and field data examples show that the inversion-based deblending can produce more accurate signal separation for highly blended data.  相似文献   

Variability of water exchanges through the Strait of Hormuz     

Vasou  Panagiotis  Vervatis  Vassilios  Krokos  George  Hoteit  Ibrahim  Sofianos  Sarantis 《Ocean Dynamics》2020,70(8):1053-1065

Ocean Dynamics - The variability of the water mass exchange between the Arabian Gulf and the Indian Ocean is investigated using a high-resolution (1/36°) ocean model. We focus on the period...  相似文献   

Performance and environmental impact of a turbojet engine fueled by blends of biodiesels     

A. H. H. Ali  M. N. Ibrahim 《International Journal of Environmental Science and Technology》2017,14(6):1253-1266

Depletion of conventional fuels, concerns about environmental pollution and the tightening of exhaust emission legislations are the main reasons for increasing research on alternative fuels produced from agricultural feedstock. In this study, biodiesel fuels produced from cotton and corn vegetable oils are investigated as renewable fuels for a gas turbine engine for aviation. The biodiesel fuels are defined as cotton methyl ester (CTME) and corn methyl ester. The performance characteristics and exhaust emissions of the gas turbine engine are investigated when the engine fueled with three blends of 10%(B10), 20%(B20) and 50%(B50) of biodiesel/JetA-1 by volume. The biodiesel fuels were produced using transesterification process and characterized according to ASTM biodiesel specifications. Chemical and physical properties show a real potential of using biodiesel blends as an alternative for JetA-1. The measured engine performance parameters and exhaust emissions are compared with that of pure JetA-1 over a range of throttle setting. The gas turbine engine used in this study is equipped with pressure, flow, temperature, thrust and speed sensors that connected to data acquisition system and control unit in addition to exhaust gas analyzer. The experimental results show that biodiesel fuels can be used up to blend of 50% with JetA-1 in gas turbine engines with slight enhancement in engine performance and significant improvements in exhaust emissions. The engine static thrust is increased with 2% for B50 at lower and medium engine speeds and decreased with 11% at high engine speed compared to conventional JetA-1 fuel. The thrust-specific fuel consumption for biodiesel blends is lower than that for regular JetA-1 fuel. The gas turbine engine efficiency is increased for biodiesel blends by 14% compared to JetA-1, and this is reported for CTME B50. For oxygen concentration in exhaust gases emissions, the higher the biodiesel blend, the higher the O₂ concentration in the exhaust compared with JetA-1 fuel. The O₂ level increased by 6% for biodiesel blend of B50 compared to JetA-1 fuel. The emissions of CO and HC emissions decreased by 5 and 37%, respectively, compared with conventional JetA-1. Additionally, the biodiesel blends achieve a higher CO₂ and NO_x emissions with 11 and 27%, respectively, compared to JetA-1. The sulfur dioxide SO₂ decreased by 75% compared to the regular JetA-1 fuel.  相似文献   

Comparison of NATM and umbrella arch method in terms of cost,completion time,and deformation     

Ibrahim Ocak  Emirhan Selcuk 《Arabian Journal of Geosciences》2017,10(7):177

In all kinds of tunnel excavations, especially those excavated in cities, it is important to control surface settlements and prevent damage to the surface and subsurface structures. For this purpose, in weak rocks and soils, the umbrella arch method (UAM) has been used in addition to the new Austrian tunneling method (NATM). NATM and UAM are the best-known classical methods used in tunnel excavation. In classical tunneling, NATM is usually preferred in normal rocks. However, in some cases, NATM may be insufficient. UAM is a very effective alternative especially in soils and weak rocks. In soil and weak rocks, UAM is especially necessary to prevent excessive deformations. Selection of UAM or NATM is based on the following factors: cost comparison of NATM and UAM, allowable deformations, quality of rock or soil, application time of NATM and UAM, availability of skilled workers, and qualification level of the workers. Therefore, selecting the excavation method in these kinds of grounds is vital in terms of achieving the project goals in time, managing the project costs effectively, and controlling the probable deformations on nearby structures. A critical issue in successful tunneling application is the ability to evaluate and predict the deformations, costs, and project time. In this paper, application times, costs, and deformation effects are compared between NATM and UAM in sensitive regions at the Uskudar-Umraniye-Cekmekoy metro project (UUCMP). Also, efficiency of the deformation control of UAM is demonstrated by using the 2D numerical analysis method. UUCMP is part of the Istanbul metro network. The tunnels have a cross section of 75.60 m² for NATM and 83.42 m² for UAM. Geology in this section is composed of weak sandstone. Diabase and andesite dykes are also rarely observed. This study shows that the construction cost of UAM are 1.7 times more expensive than NATM. Although application time of UAM is 2.5 times longer than NATM, it is 2.5 times more efficient in controlling the deformations. This efficiency in controlling the deformations is confirmed via two-dimensional numerical analyses.  相似文献   

Seismic and well logging interpretation for evaluation of the lower Bahariya reservoir,southwest Qarun (SWQ) Field,Gindi Basin,Egypt     

Mohammad Abdelfattah Sarhan  A. M. K. Basal  Ibrahim Mohamed Ibrahim 《Marine Geophysical Researches》2017,38(3):271-290

This paper focuses on seismic and well log interpretations for evaluating the sandstones of the Cenomanian Bahariya Formation in the southwest Qarun Field, Gindi Basin, northern Western Desert of Egypt. The seismic profiles display a clear anticlinal structure intersected by reverse faults in the study area. This faulted anticline has been interpreted to be one of the Syrian arc system folds formed by Upper Cretaceous tectonic inversion, which resulted from the NW movement of the African Plate relative to Laurasia. This anticline has been recommended as a target for exploration by the present work as it may represent a structural trap for hydrocarbon accumulation. The sandstones of the Lower Bahariya Formation in the southwest Qarun Field display good reservoir characteristics. The interpretation of the available well log data for the SWQ-21 and SWQ-25 wells for the Lower Bahariya Formation reflects a good reservoir quality for oil production in its topmost part. This reservoir possesses low S_W (<50%), high porosity (16%), low S_W/S_XO and low BVW (<0.09) which all reflect a high potential for oil production.  相似文献   

Decomposition of Methylene Blue on Transition Metals Doped SnO2 Nanoparticles          下载免费PDF全文

Mohamed M. Rashad  Adel A. Ismail  Inge Osama  Ibrahim A. Ibrahim  Abdel‐Hakim T. Kandil 《洁净——土壤、空气、水》2014,42(5):657-663

  相似文献   

Computerised development control and approval system for City Hall of Kuala Lumpur     

AhrisYaakup YazidAbuBakar MohdNuruddin AbdulKadir SusilawatiSulaiman 《地球空间信息科学学报》2004,7(1):39-49

This paper will discuss the computerised development control and approval system being developed for the Planning and Development Control Department, City Hall of Kuala Lumpur, with stress on the GIS architecture developed within the system. The prospects and challenges towards implementation of the system are also discussed.  相似文献