A Correction on Coastal Heads for Groundwater Flow Models          下载免费PDF全文

Chunhui Lu  Adrian D. Werner  Craig T. Simmons  Jian Luo 《Ground water》2015,53(1):164-170

We introduce a simple correction to coastal heads for constant‐density groundwater flow models that contain a coastal boundary, based on previous analytical solutions for interface flow. The results demonstrate that accurate discharge to the sea in confined aquifers can be obtained by direct application of Darcy's law (for constant‐density flow) if the coastal heads are corrected to ((α + 1)/α)h_s ? B/2α, in which h_s is the mean sea level above the aquifer base, B is the aquifer thickness, and α is the density factor. For unconfined aquifers, the coastal head should be assigned the value . The accuracy of using these corrections is demonstrated by consistency between constant‐density Darcy's solution and variable‐density flow numerical simulations. The errors introduced by adopting two previous approaches (i.e., no correction and using the equivalent fresh water head at the middle position of the aquifer to represent the hydraulic head at the coastal boundary) are evaluated. Sensitivity analysis shows that errors in discharge to the sea could be larger than 100% for typical coastal aquifer parameter ranges. The location of observation wells relative to the toe is a key factor controlling the estimation error, as it determines the relative aquifer length of constant‐density flow relative to variable‐density flow. The coastal head correction method introduced in this study facilitates the rapid and accurate estimation of the fresh water flux from a given hydraulic head measurement and allows for an improved representation of the coastal boundary condition in regional constant‐density groundwater flow models.  相似文献   

Spatial Periodic Boundary Condition for MODFLOW     

Tariq Laattoe  Vincent E.A. Post  Adrian D. Werner 《Ground water》2014,52(4):606-612

Small‐scale hyporheic zone (HZ) models often use a spatial periodic boundary (SPB) pair to simulate an infinite repetition of bedforms. SPB's are common features of commercially available multiphysics modeling packages. MODFLOW's lack of this boundary type has precluded it from being effectively utilized in this area of HZ research. We present a method to implement the SPB in MODFLOW by development of the appropriate block‐centered finite‐difference expressions. The implementation is analogous to MODFLOW's general head boundary package. The difference is that the terms on the right hand side of the solution equations must be updated with each iteration. Consequently, models that implement the SPB converge best with solvers that perform both inner and outer iterations. The correct functioning of the SPB condition in MODFLOW is verified by two examples. This boundary condition allows users to build HZ‐bedform models in MODFLOW, facilitating further research using related codes such as MT3DMS and PHT3D.  相似文献   

Rebuttal to the comment by Malhotra and Strom on “Constraints on the source of lunar cataclysm impactors”     

Matija ?uk  Brett J. Gladman 《Icarus》2011,216(1):363-365

?uk et al. (?uk, M. Gladman, B.J., Stewart, S.T. [2010]. Icarus 207 590-594) concluded that the the lunar cataclysm (late heavy bombardment) was recorded in lunar Imbrian era craters, and that their size distribution is different from that of main belt asteroids (which may have been the dominant pre-Imbrian impactors). This result would likely preclude the asteroid belt as the direct source of lunar cataclysm impactors. Malhotra and Strom (Malhotra, R., Strom, R.G. [2011]. Icarus) maintain that the lunar impactor population in the Imbrian era was the same as in Nectarian and pre-Nectarian periods, and this population had a size distribution identical to that of main belt asteroids. In support of this claim, they present an Imbrian size distribution made from two data sets published by Wilhelms et al. (Wilhelms, D.E., Oberbeck, V.R., Aggarwal, H.R. [1978]. Proc. Lunar Sci. Conf. 9, 3735-3762). However, these two data sets cannot be simply combined as they represent areas of different ages and therefore crater densities. Malhotra and Strom (Malhotra, R., Strom, R.G. [2011]. Icarus) differ with the main conclusion of Wilhelms et al. (Wilhelms, D.E., Oberbeck, V.R., Aggarwal, H.R. [1978]. Proc. Lunar Sci. Conf. 9, 3735-3762) that the Nectarian and Imbrian crater size distributions were different. We conclude that the available data indicate that the lunar Imbrian-era impactors had a different size distribution from the older ones, with the Imbrian impactor distribution being significantly richer in small impactors than that of older lunar impactors or current main-belt asteroids.  相似文献   

Contrasting rainfall generated debris flows from adjacent watersheds at Forest Falls, southern California, USA   总被引：1，自引：0，他引：1  

Douglas M. Morton  Rachel M. Alvarez  Kelly R. Ruppert  Brett Goforth 《Geomorphology》2008,96(3-4):322

Debris flows are widespread and common in many steeply sloping areas of southern California. The San Bernardino Mountains community of Forest Falls is probably subject to the most frequently documented debris flows in southern California. Debris flows at Forest Falls are generated during short-duration high-intensity rains that mobilize surface material. Except for debris flows on two consecutive days in November 1965, all the documented historic debris flows have occurred during high-intensity summer rainfall, locally referred to as ‘monsoon’ or ‘cloudburst’ rains. Velocities of the moving debris range from about 5 km/h to about 90 km/h. Velocity of a moving flow appears to be essentially a function of the water content of the flow. Low velocity debris flows are characterized by steep snouts that, when stopped, have only small amounts of water draining from the flow. In marked contrast are high-velocity debris flows whose deposits more resemble fluvial deposits. In the Forest Falls area two adjacent drainage basins, Snow Creek and Rattlesnake Creek, have considerably different histories of debris flows. Snow Creek basin, with an area about three times as large as Rattlesnake Creek basin, has a well developed debris flow channel with broad levees. Most of the debris flows in Snow Creek have greater water content and attain higher velocities than those of Rattlesnake Creek. Most debris flows are in relative equilibrium with the geometry of the channel morphology. Exceptionally high-velocity flows, however, overshoot the channel walls at particularly tight channel curves. After overshooting the channel, the flows degrade the adjacent levee surface and remove trees and structures in the immediate path, before spreading out with decreasing velocity. As the velocity decreases the clasts in the debris flows pulverize the up-slope side of the trees and often imbed clasts in them. Debris flows in Rattlesnake Creek are relatively slow moving and commonly stop in the channel. After the channel is blocked, subsequent debris flows cut a new channel upstream from the blockage that results in the deposition of new debris-flow deposits on the lower part of the fan. Shifting the location of debris flows on the Rattlesnake Creek fan tends to prevent trees from becoming mature. Dense growths of conifer seedlings sprout in the spring on the late summer debris flow deposits. This repeated process results in stands of even-aged trees whose age records the age of the debris flows.  相似文献   

Comparison of surface and borehole locations of induced seismicity   总被引：1，自引：0，他引：1  

Leo Eisner  B. J. Hulsey  Peter Duncan  Dana Jurick  Heigl Werner  William Keller 《Geophysical Prospecting》2010,58(5):809-820

Monitoring of induced microseismic events has become an important tool in hydraulic fracture diagnostics and understanding fractured reservoirs in general. We compare microseismic event and their uncertainties using data sets obtained with surface and downhole arrays of receivers. We first model the uncertainties to understand the effect of different acquisition geometries on location accuracy. For a vertical array of receivers in a single monitoring borehole, we find that the largest part of the final location uncertainty is related to estimation of the backazimuth. This is followed by uncertainty in the vertical position and radial distance from the receivers. For surface monitoring, the largest uncertainty lies in the vertical position due to the use of only a single phase (usually P‐wave) in the estimation of the event location. In surface monitoring results, lateral positions are estimated robustly and are not sensitive to the velocity model. In this case study, we compare event location solutions from two catalogues of microseismic events; one from a downhole array and the second from a surface array of 1C geophone. Our results show that origin time can be reliably used to find matching events between the downhole and surface catalogues. The locations of the corresponding events display a systematic shift consistent with a poorly calibrated velocity model for downhole dataset. For this case study, locations derived from surface monitoring have less scatter in both vertical and horizontal directions.  相似文献   

Statement to comment by K. Föllmi on ,,Neubenennungen lithostratigraphischer Einheiten in der helvetischen Kreide“     

Schweizerisches Komitee für Stratigraphie  Thierry Adatte  Jean-Pierre Berger  Hansruedi Bläsi  Reto Burkhalter  Stephan DallAgnolo  Danielle Decrouez  Hanspeter Funk  Heinz Furrer  Yves Gouffon  Hansruedi Graf  Werner Heckendorn  Wilfried Winkler 《Swiss Journal of Geoscience》2009,102(3):519-519

  相似文献   

Sr-isotope stratigraphy of the Upper Jurassic of central Portugal (Lusitanian Basin) based on oyster shells     

Simon Schneider  Franz T. Fürsich  Winfried Werner 《International Journal of Earth Sciences》2009,98(8):1949-1970

Strontium isotope stratigraphy was performed on oyster shells from the Late Jurassic of the Lusitanian Basin (central Portugal). This represents the first approach to obtain numerical ages for these strata. The new chronostratigraphic data provide a more precise age determination of several units. After a basin-wide hiatus sedimentation in the Late Jurassic is proven in the Cabo Mondego and Cabaços formations to resume as early as the Middle Oxfordian. The Alcobaça formation can be placed in the latest Late Oxfordian to Late Kimmeridgian, while data from the upper part of the Abadia Formation indicate an Early to Late Kimmeridgian age. The Farta Pao formation ranges from the latest Kimmeridgian to the latest Tithonian. The largely synchronous Sobral, Arranhó I, and Arranhó II members are overlain by the late Early to Late Tithonian Freixial Member. The brief, local carbonate incursion of the Arranhó I member marks the Kimmeridgian–Tithonian boundary. Oysters are shown once more to be suitable for strontium isotope studies. Their calcitic shells are often unaffected by diagenesis. In particular for marginal marine Jurassic and Cretaceous strata, where belemnites are usually absent, oysters may serve as a valuable tool for isotope stratigraphy.  相似文献   

Using GIS and large-scale digital data to implement hedonic pricing studies     

Iain R. Lake  Andrew A. Lovett  Ian J. Bateman  Brett Day 《International journal of geographical information science》2013,27(6):521-541

This paper describes how a standard GIS package can be used to convert large-scale vector digital data (point, line and annotation features) into polygons using standardised and replicable methods. Building area, garden and land use polygons are all derived from such data (Ordnance Survey LandLine.Plus). These entities are then combined with further sources of digital data to derive more refined information such as property types. Finally, complex DEMs are developed for use in visibility studies. The variables calculated are subsequently employed in a property valuation study where many are found to be significant determinants of property price. The main exception is variables relating to viewsheds, although it is argued that this does not invalidate the techniques used in their deviation but highlights the difficulties involved in modelling a large number of variables in a property price analysis.  相似文献   

Evaluating legacy contaminants and emerging chemicals in marine environments using adverse outcome pathways and biological effects-directed analysis     

Thomas H. Hutchinson  Brett P. Lyons  John E. Thain  Robin J. Law 《Marine pollution bulletin》2013

Natural and synthetic chemicals are essential to our daily lives, food supplies, health care, industries and safe sanitation. At the same time protecting marine ecosystems and seafood resources from the adverse effects of chemical contaminants remains an important issue. Since the 1970s, monitoring of persistent, bioaccumulative and toxic (PBT) chemicals using analytical chemistry has provided important spatial and temporal trend data in three important contexts; relating to human health protection from seafood contamination, addressing threats to marine top predators and finally providing essential evidence to better protect the biodiversity of commercial and non-commercial marine species. A number of regional conventions have led to controls on certain PBT chemicals over several years (termed ‘legacy contaminants’; e.g. cadmium, lindane, polycyclic aromatic hydrocarbons [PAHs] and polychlorinated biphenyls [PCBs]). Analytical chemistry plays a key role in evaluating to what extent such regulatory steps have been effective in leading to reduced emissions of these legacy contaminants into marine environments. In parallel, the application of biomarkers (e.g. DNA adducts, CYP1A-EROD, vitellogenin) and bioassays integrated with analytical chemistry has strengthened the evidence base to support an ecosystem approach to manage marine pollution problems. In recent years, however, the increased sensitivity of analytical chemistry, toxicity alerts and wider environmental awareness has led to a focus on emerging chemical contaminants (defined as chemicals that have been detected in the environment, but which are currently not included in regulatory monitoring programmes and whose fate and biological impacts are poorly understood). It is also known that natural chemicals (e.g. algal biotoxins) may also pose a threat to marine species and seafood quality. Hence complex mixtures of legacy contaminants, emerging chemicals and natural biotoxins in marine ecosystems represent important scientific, economic and health challenges. In order to meet these challenges and pursue cost-effective scientific approaches that can provide evidence necessary to support policy needs (e.g. the European Marine Strategy Framework Directive), it is widely recognised that there is a need to (i) provide marine exposure assessments for priority contaminants using a range of validated models, passive samplers and biomarkers; (ii) integrate chemical monitoring data with biological effects data across spatial and temporal scales (including quality controls); and (iii) strengthen the evidence base to understand the relationship between exposure to complex chemical mixtures, biological and ecological impacts through integrated approaches and molecular data (e.g. genomics, proteomics and metabolomics). Additionally, we support the widely held view that (iv) that rather than increasing the analytical chemistry monitoring of large number of emerging contaminants, it will be important to target analytical chemistry towards key groups of chemicals of concern using effects-directed analysis. It is also important to evaluate to what extent existing biomarkers and bioassays can address various classes of emerging chemicals using the adverse outcome pathway (AOP) approach now being developed by the Organization for Economic Cooperation and Development (OECD) with respect to human toxicology and ecotoxicology.  相似文献   

Maximizing Net Extraction Using an Injection‐Extraction Well Pair in a Coastal Aquifer     

Chunhui Lu  Adrian D. Werner  Craig T. Simmons  Neville I. Robinson  Jian Luo 《Ground water》2013,51(2):219-228

In this study, we examine the maximum net extraction rate from the novel arrangement of an injection‐extraction well pair in a coastal aquifer, where fresh groundwater is reinjected through the injection well located between the interface toe and extraction well. Complex potential theory is employed to derive a new analytical solution for the maximum net extraction rate and corresponding stagnation‐point locations and recirculation ratio, assuming steady‐state, sharp‐interface conditions. The injection‐extraction well‐pair system outperforms a traditional single extraction well in terms of net extraction rate for a broad range of well placement and pumping rates, which is up to 50% higher for an aquifer with a thickness of 20 m, hydraulic conductivity of 10 m/d, and fresh water influx of 0.24 m²/d. Sensitivity analyses show that for a given fresh water discharge from an inland aquifer, a larger maximum net extraction is expected in cases with a smaller hydraulic conductivity or a smaller aquifer thickness, notwithstanding physical limits to drawdown at the pumping well that are not considered here. For an extraction well with a fixed location, the optimal net extraction rate linearly increases with the distance between the injection well and the sea, and the corresponding injection rate and recirculation ratio also increase. The analytical analysis in this study provides initial guidance for the design of well‐pair systems in coastal aquifers, and is therefore an extension beyond previous applications of analytical solutions of coastal pumping that apply only to extraction or injection wells.  相似文献