Constraining crystallization pressure and thus intrusion depth of granites in various geodynamic settings remains challenging, yet important to further our understanding of magma system and crustal evolution. We propose that titanite, which is a common accessory in metaluminous and weakly peraluminous granites, can be used as a barometer if it crystallized in magmatic, near-solidus conditions and in equilibrium with amphibole, plagioclase, K-feldspar, quartz, biotite, and magnetite ± ilmenite. Titanite Al2O3 increases with pressure (P) according to: P (in MPa) = 101.66 × Al2O3 in titanite (in wt%) + 59.013 (R2 = 0.83) with estimated uncertainties of ~±60 to ~±100 MPa for crystallization between ~150 and 400 MPa. We highlight that the current calibration dataset is limited, and that systematic experimental studies are needed to rigorously quantify the relation. The most important use of this empirical barometer will be for rocks in which amphibole is present but significantly altered, or in combination with amphibole barometry, as titanite can be easily dated by LA-ICP-MS. 相似文献
Incorporating prior geological knowledge in geophysical process models often meets practical meshing challenges and raises the question of how much detail is to be included in the geometric model. We introduce a strategy to automatically repair and simplify geological maps, geological cross-sections and the associated meshes while preserving elementary consistency rules. To identify features breaking validity and/or the thin features potentially problematic when generating a mesh, we associate an exclusion zone with each model feature (horizon, fault). When these zones overlap, both the connectivity and the geometry of the geological layers are automatically modified. The output model enforces specific practical quality criteria on the model topology and geometry that facilitates the generation of a mesh with lower bounds on minimum angles and minimum local entity sizes. Our strategy is demonstrated on an invalid geological cross-section from a real-case study in the Lorraine coal basin. We further explore the impacts of the model modifications on wave propagation simulation. We show that the differences on the seismograms due to model simplifications are relatively small if the magnitude of simplifications is adapted to the physical problem parameters. 相似文献
Models for when and how the continental crust was formed are constrained by estimates in the rates o crustal growth. The record of events preserved in the continental crust is heterogeneous in time with distinctive peaks and troughs of ages for igneous crystallisation, metamorphism, continental margin and mineralisation. For the most part these are global signatures, and the peaks of ages tend to b associated with periods of increased reworking of pre-existing crust, reflected in the Hf isotope ratios o zircons and their elevated oxygen isotope ratios. Increased crustal reworking is attributed to periods o crustal thickening associated with compressional tectonics and the development of supercontinents Magma types similar to those from recent within-plate and subduction related settings appear to hav been generated in different areas at broadly similar times before ~3.0 Ga. It can be difficult to put th results of such detailed case studies into a more global context, but one approach is to consider when plate tectonics became the dominant mechanism involved in the generation of juvenile continental crust The development of crustal growth models for the continental crust are discussed, and a number o models based on different data sets indicate that 65%-70% of the present volume of the continental crus was generated by 3 Ga. Such estimates may represent minimum values, but since ~3 Ga there has been reduction in the rates of growth of the continental crust. This reduction is linked to an increase in th rates at which continental crust is recycled back into the mantle, and not to a reduction in the rates a which continental crust was generated. Plate tectonics results in both the generation of new crust and it destruction along destructive plate margins. Thus, the reduction in the rate of continental crustal growth at ~3 Ga is taken to reflect the period in which plate tectonics became the dominant mechanism b which new continental crust was generated. 相似文献
The Aquitanian Coast (France) is a high-energy meso-macrotidal environment exhibiting a highly variable double sandbar system. The inner and the outer bar generally exhibit a bar and rip morphology and persistent crescentic patterns, respectively. In June 2007, an intense five-day field experiment was carried out at Biscarrosse Beach. A large array of sensors was deployed on a well-developed southward-oriented bar and rip morphology. Daily topographic surveys were carried out together with video imaging to investigate beach morphodynamic evolution. During the experiment, offshore significant wave height ranged from 0.5 to 3 m, with a persistent shore-normal angle. This paper identifies two types of behavior of an observed rip current: (1) for low-energy waves, the rip current is active only between low and mid tide with maximum mean rip current velocity reaching 0.8 m/s for an offshore significant wave height (Hs) lower than 1 m; (2) for high-energy waves (Hs≈ 2.5–3 m), the rip current was active over the whole tide cycle with the presence of persistent intense offshore-directed flows between mid and high tide. For both low and high-energy waves, very low-frequency pulsations (15–30 min) of the mean currents are observed on both feeder and rip channels.A persistent slow shoreward migration of the sandbar was observed during the experiment while no significant alongshore migration of the system was measured. Onshore migration during the high-energy waves can be explained by different sediment transport processes such as flow velocity skewness, wave asymmetry or bed ventilation. High-frequency local measurements of the bed evolution show the presence of significant (in the order of 10 cm) fluctuations (in the order of 1 h). These fluctuations, observed for both low- and high-energy waves, are thought to be ripples and megaripples, respectively and may play an important but still poorly understood role in the larger scale morphodynamics. The present dataset improves the knowledge of rip dynamics as well as the morphological response of strongly alongshore non-uniform meso-macrotidal beaches. 相似文献
Rainfall measurements by conventional raingauges provide relatively accurate estimates at a few points of a region. The actual rainfield can be approximated by interpolating the available raingauge data to the remaining of the area of interest. In places with relatively low gauge density such interpolated rainfields will be very rough estimates of the actual events. This is especially true for tropical regions where most rainfall has a convective origin with high spatial variability at the daily level. Estimates of rainfall by remote sensing can be very useful in regions such as the Amazon basin, where raingauge density is very low and rainfall highly variable. This paper evaluates the rainfall estimates of the Tropical Rainfall Measuring Mission (TRMM) satellite over the Tapajós river basin, a major tributary of the Amazon. Three-hour TRMM rainfall estimates were aggregated to daily values and were compared with catch of ground-level precipitation gauges on a daily basis after interpolating both data to a regular grid. Both daily TRMM and raingauge-interpolated rainfields were then used as input to a large-scale hydrological model for the whole basin; the calculated hydrographs were then compared to observations at several streamgauges along the river Tapajos and its main tributaries. Results of the rainfield comparisons showed that satellite estimates can be a practical tool for identifying damaged or aberrant raingauges at a basin-wide scale. Results of the hydrological modeling showed that TRMM-based calculated hydrographs are comparable with those obtained using raingauge data. 相似文献
The common mussel Mytilus galloprovincialis was selected as unique biomonitor species to implement a regional monitoring programme, the CIESM Mediterranean Mussel Watch (MMW), in the Mediterranean and Black Seas. As of today, and upon standardization of the methodological approach, the MMW Network has been able to quantify 137Cs levels in mussels from 60 coastal stations and to produce the first distribution map of this artificial radionuclide at the scale of the entire Mediterranean and Black Seas. While measured 137Cs levels were found to be very low (usually <1 Bq kg−1 wet wt) 137Cs activity concentrations in the Black Sea and North Aegean Sea were up to two orders of magnitude higher than those in the western Mediterranean Basin. Such effects, far from representing a threat to human populations or the environment, reflect a persistent signature of the Chernobyl fallout in this area. 相似文献
The chemical mass balance of calcrete genesis is studied on a typical sequence developed in granite, in the Toledo mountains, Central Spain.
Field evidence and petrographic observations indicate that the texture and the bulk volume of the parent rock are strictly preserved all along the studied calcrete profile.
Microscopic observations indicate that the calcitization process starts within the saprolite, superimposed on the usual mechanisms of granite weathering: the fresh rock is first weathered to secondary clays, mainly smectites, which are then pseudomorphically replaced by calcite. Based on this evidence, chemical mass transfers are calculated, assuming iso-volume transformation from the parent rock to the calcrete.
The mass balance results show the increasing loss of matter due to weathering of the primary phases, from the saprolite towards the calcrete layers higher in the sequence. Zr, Ti or Th, which are classically considered as immobile during weathering, are also depleted along the profile, especially in the calcrete layer. This results from the prevailing highly alkaline conditions, which could account for the simultaneous precipitation of CaCO3 and silicate dissolution.
The calculated budget suggests that the elements exported from the weathering profile are provided dominantly by the weathering of plagioclase and biotite. We calculate that 8–42% of the original Ca remains in granitic relics, while only 15% of the authigenic Ca released by weathering is reincorporated in the calcite. This suggests that 373 kg/m2 of calcium (i.e., three times the original amount) is imported into the calcrete from allochtonous sources, probably due to aeolian transport from distant limestone formations. 相似文献