邯峰矿区古构造应力场与构造演化     

曹代勇占文峰  张军杨森丛  张路锁刘太福 常明华 《中国煤田地质》2005,17(5):1-3

采用共轭剪节理应力反演方法,恢复了邯郸-峰峰矿区晚古生代以来的3期古构造应力场,进而探讨了煤田构造的演化历史,将其分为4大阶段：①中生代早期近NS向挤压,煤系后期改造初动期;②中生代晚期SE-NW向挤压,奠定煤田构造格架的基础;③中生代末至古近纪NW-SE向拉张,煤田构造格架定型;④新近纪以来近东西向拉张,煤田构造的现代活动.  相似文献   

An optimal determination of variable antenna height and power for in-orbit SAR operations     

Kang-Min Park Hyung-Myung Kim 《Geoscience and Remote Sensing Letters, IEEE》2005,2(2):196-200

An optimal power and antenna height determination over a wide range of incidence angles is proposed for in-orbit operations of the spaceborne stripmap synthetic aperture radar (SAR) with variable antenna height and variable radiating element power. The antenna height and the average transmitted radio-frequency power of a radiating element for each incidence angle are determined so that the mapping area can be maximized with the constraints on the signal-to-noise ratio, ambiguities, and swath width, given the SAR geometry (an altitude and incidence angles) and radar wavelength. With the receive-chain power consumption of one transmit/receive module (P/sub r/=10 mW) and the SAR instrument power consumption without the phased array antenna (P/sub I/=5 W), the illustrative design example shows that the mapping area of the proposed SAR for the maximum incidence angle (/spl eta//sup max/=75/spl deg/) is about 269.1% of that resulted from utilizing only the variable antenna height. The proposed optimization would have a more beneficial effect on applications that need the high-incidence-angle operations.  相似文献   

A coupled climate model simulation of the Last Glacial Maximum, Part 1: transient multi-decadal response   总被引：2，自引：1，他引：2  

S.-J. Kim  G. Flato  G. Boer  N. McFarlane 《Climate Dynamics》2002,19(5-6):515-537

  相似文献   

Optimal design of passive energy dissipation systems based on H∞ and H2 performances     

J. N. Yang  S. Lin  J‐H. Kim  A. K. Agrawal 《地震工程与结构动力学》2002,31(4):921-936

Passive energy dissipation devices (EDDs), such as viscous dampers, viscoelastic dampers, etc., have been used to effectively reduce the dynamic response of civil infrastructures, such as buildings and bridges, subject to earthquakes and strong winds. The design of these passive energy dissipation devices (EDDs) involves the determination of the optimal locations and the corresponding capacities. In this paper, we present two optimal design methodologies for passive EDDs based on active control theories, including H_∞ and H₂ performances, respectively. The optimal design methodologies presented are capable of determining the optimal locations and the corresponding capacities of EDDs. Emphasis is placed on the application of linear matrix inequality (LMI) for the effective design of passive EDDs using the popular MATLAB toolboxes. One important advantage of the proposed approaches is that the computation of the structural response is not needed in the design process. The proposed optimal design methodologies have been applied to: (i) a 10‐storey building and a 24‐storey building both subject to earthquake excitations, and (ii) a 76‐storey wind‐excited benchmark building, to demonstrate the advantages of the proposed design methodologies over the conventional equal capacity design. Copyright © 2002 John Wiley & Sons, Ltd.  相似文献   

Study on effects of damping in laminated rubber bearings on seismic responses for a ⅛ scale isolated test structure     

Bong Yoo  Yang‐Hann Kim 《地震工程与结构动力学》2002,31(10):1777-1792

The effects of damping in various laminated rubber bearings (LRB) on the seismic response of a ?‐scale isolated test structure are investigated by shaking table tests and seismic response analyses. A series of shaking table tests of the structure were performed for a fixed base design and for a base isolation design. Two different types of LRB were used: natural rubber bearings (NRB) and lead rubber bearings (LLRB). Three different designs for the LLRB were tested; each design had a different diameter of lead plug, and thus, different damping values. Artificial time histories of peak ground acceleration 0.4g were used in both the tests and the analyses. In both shaking table tests and analyses, as expected, the acceleration responses of the seismically isolated test structure were considerably reduced. However, the shear displacement at the isolators was increased. To reduce the shear displacement in the isolators, the diameter of the lead plug in the LLRB had to be enlarged to increase isolator damping by more than 24%. This caused the isolator stiffness to increase, and resulted in amplifying the floor acceleration response spectra of the isolated test structure in the higher frequency ranges with a monotonic reduction of isolator shear displacement. Copyright © 2002 John Wiley & Sons, Ltd.  相似文献   

青藏公路路基变形分析   总被引：29，自引：8，他引：29  

俞祁浩  刘永智  童长江 《冰川冻土》2002,24(5):623-627

为研究青藏公路多年冻土人为上限在退化过程中对路基变形产生的影响过程和程度, 在唐古拉山以南选择了3处具有代表性的路面进行了为期2 a的路面变形观测. 资料表明, 在多年冻土人为上限退化过程中随着公路路基结构、冻土类型的不同, 路基变形从冻胀和融沉过程、冻胀量和融沉量、发生的时间都有很大的不同. 在高含冰量多年冻土区采用半挖半填结构产生的路基变形最为剧烈, 在含冰量相对少且采用较高路堤结构的地段路基变形过程相对平缓. 同时结合探地雷达的勘察结果对路基下的融化区、多年冻土区的内部结构进行了分析. 结果显示,多年冻土人为上限的下移、地下冰的融化会在多年冻土人为上限以上的地质体中导致较强烈的层间错动和扰动.  相似文献   

Isostasie flexurale et érosion différentielle : modélisation numérique appliquée au seuil du PoitouFlexural isostasy and differential erosion: numerical modelling applied at the ‘Seuil du Poitou’     

Jean-Christophe Maurin  Kim Renaud 《Comptes Rendus Geoscience》2002,334(16)

One uses the principle of flexural isostasy to represent the uplift of the ‘Seuil du Poitou’ in response to erosion. The model indicates that a different uplift of on the last five millions years resulted from an erosion paradoxically stronger in the crystalline basement than in the limestones bedrock. To cite this article: J.-C. Maurin, K. Renaud, C. R. Geoscience 334 (2002) 1149–1155.  相似文献   

Geochemical Studies of Sodium Enriched Metavolcanite Series in the Area of Longbohe Copper Deposit,Yunnan Province,SW China：Nd,Sr and Pb Isotopic Characteristics and Chronology     

常向阳  朱炳泉  莫向云 《中国地球化学学报》2002,21(2):163-169

The chronological data obtained by a variety of dating methods have confirmed that the sodium enriched metavolcanite series in the area of the Longbohe copper deposit at Jinping, Yunnan Province, was formed during the Proterozoic (its Pb−Pb isochron age=1595±75 Ma), corresponding to the Dahongshan Group sodium enriched metavolcanites. The Sm−Nd isochron age of 1336±46Ma should represent the time at which this series of volcanic rocks experienced spilitization in response to sodium metasomatism, equivalent to the time of sedimentation of the Ailaoshan Group and Yashan Group rocks. The Rb−Sr ages of the volcanic rocks and the Pb−Pb ages of copper ores have recorded the events of strong dynamic metamorphism and of strong reworking-metallogenesis of copper during the Jinningian period. Similarities in forming age, rock assemblage and isotopic characteristics between the sodium enriched metavolcanite series and the Dahongshan Group sodium enriched metavolcanite series have provided new clues to the exploration of the Dahongshan-type copper deposits in this area. Granted jointly by the National Natural Science Foundation of China (Nos. 49702022, 40073001) and the State 973 Program (No. G1999043215).  相似文献   

Factorial and indicator kriging methods using a geographic information system to delineate spatial variation and pollution sources of soil heavy metals   总被引：2，自引：0，他引：2  

Yu-Pin Lin  Tsun-Kuo Chang  Chiung-Wen Shih  Chen-Hui Tseng 《Environmental Geology》2002,42(8):900-909

This study uses factorial and indicator kriging methods with a geographic information system (GIS), to overlay and delineate the variation and pollution sources of soil heavy metals in fields in the north of Changhua County, Taiwan. Accordingly, the spatial variation and pollution probability patterns of soil cadmium, chromium and copper are estimated to support further environmental monitoring, remediation and planning. The overlay maps of industrial plants, irrigation channels and kriging estimates, constitute a GIS. This reveals that the short- and long-range variations and soil pollution by Cd, Cr and Cu strongly corresponded to the locations of irrigation systems and industrial plants in the area of study. The maps also verify most locations of suspected pollution sources from the GIS database. Moreover, the probability spatial patterns estimated by indicator kriging, based on the pollution thresholds of Cd, Cr and Cu, were also highly correlated with irrigation channels and industrial plants. The GIS, with factorial and indicator kriging under different combinations of variations and pollution probabilities of soil Cd, Cr and Cu, provide alternative scenarios for delineating the areas that contain high variation and high pollution probability of these heavy metals, to enable decision makers to identify pollution sources, and to further investigate and remedy soil pollution.  相似文献   

Experimental validation of the wavefield transform of electromagnetic fields     

Kaushik Das  Alex Becker  Ki Ha Lee 《Geophysical Prospecting》2002,50(5):441-451

The wavefield transform is a mathematical technique for transforming low-frequency electromagnetic (EM) signals to a non-diffusive wave domain. The ray approximation is valid in the transform space and this makes traveltime tomography for 3D mapping of the electrical conductivity distribution in the subsurface possible. The transform, however, imposes stringent frequency bandwidth and signal-to-noise ratio requirements on the data. Here we discuss a laboratory scale experiment designed to collect transform quality EM data, and to demonstrate the practical feasibility of transforming these data to the wavefield domain.
We have used the scalable nature of EM fields to design a time-domain experiment using graphite blocks to simulate realistic field conditions while leaving the time scale undisturbed. The spatial dimensions have been scaled down by a factor of a thousand by scaling conductivity up by a factor of a million. The graphite blocks have two holes drilled into them to carry out cross-well and borehole-to-surface experiments. Steel sheets have been inserted between the blocks to simulate a conductive layer.
Our experiments show that accurate EM data can be recorded on a laboratory scale model even when the scaling of some features, such as drill-hole diameters, is not maintained. More importantly, the time-domain EM data recorded in cross-well and surface-to-borehole modes can be usefully and accurately transformed to the wavefield domain. The observed wavefield propagation delay is proportional to the direct distance between the transmitter and receiver in a homogeneous medium. In a layered medium, data accuracy is reduced and, hence, our results are not so conclusive. On the basis of the experimental results we conclude that the wavefield transform could constitute a valid approach to the interpretation of accurate, undistorted time-domain data if further improvement in the transform can be realized.  相似文献