Seasonal barotropic sea surface height fluctuation in relation to regional ocean mass variation     

Tsurane Kuragano  Yosuke Fujii  Takahiro Toyoda  Norihisa Usui  Koji Ogawa  Masafumi Kamachi 《Journal of Oceanography》2014,70(1):45-62

A consistency between seasonal fluctuation of actual sea surface height (SSH) and those caused by mass and density variations in gyre-scale regions is examined. The SSH obtained from satellite altimetry (altimetric SSH) is adopted as the actual SSH. SSH caused by mass variation (mass-related SSH) is simulated using a barotropic global ocean model forced by water flux, wind stress and surface pressure. SSH caused by density variation (steric SSH) is calculated from water density profile, i.e. temperature and salinity profiles. The model SSH well represents mass-related SSH for gyre-scale regional means, and seasonal fluctuation of the altimetric SSH corrected for the model SSH is similar to that of steric SSH above a pressure level larger than 300 dbar. The results indicate that the mass-related SSH does not much respond to the baroclinic adjustment to the seasonally varying wind stress curl. The mass-related SSH forced by wind stress and surface pressure should be accounted for regional evaluation, though it is not necessary for global mean evaluation. Detection of steric SSH from altimetric SSH would be useful for assimilation approaches in which the altimetric SSH is treated as the variable reflecting subsurface temperature and salinity.  相似文献   

Propagating tsunami wave and subsequent resonant response signals detected by HF radar in the Kii Channel,Japan     

Hirofumi Hinata  Satoshi Fujii  Keita Furukawa  Tomoya Kataoka  Masafumi Miyata  Takashi Kobayashi  Masahiro Mizutani  Takahiro Kokai  Nobuyoshi Kanatsu 《Estuarine, Coastal and Shelf Science》2011

Signals from the tsunami waves induced by the March 11, 2011 moment magnitude (M_w) 9.0 Tohoku-Oki earthquake and from subsequent resonances were detected as radial velocity variability by a high-frequency ocean surface radar (HF radar) installed on the eastern coast of the Kii Channel, at a range of about 1000 km from the epicenter along the eastern to southern coasts of Honshu Island. A time–distance diagram of band-passed (9–200 min) radial velocity along the beam reveals that the tsunami waves propagated from the continental shelf slope to the inner channel as progressive waves for the first three waves, and then natural oscillations were excited by the waves; and that the direction of the tsunami wave propagation and the axis of the natural oscillations differed from that of the radar beam. In addition, spectral analyses of the radial velocities and sea surface heights obtained in the channel and on the continental shelf slope suggest complex natural oscillation modes excited by the tsunami waves.  相似文献   

Slip Distribution and Seismic Moment of the 2010 and 1960 Chilean Earthquakes Inferred from Tsunami Waveforms and Coastal Geodetic Data     

Yushiro Fujii  Kenji Satake 《Pure and Applied Geophysics》2013,170(9-10):1493-1509

The slip distribution and seismic moment of the 2010 and 1960 Chilean earthquakes were estimated from tsunami and coastal geodetic data. These two earthquakes generated transoceanic tsunamis, and the waveforms were recorded around the Pacific Ocean. In addition, coseismic coastal uplift and subsidence were measured around the source areas. For the 27 February 2010 Maule earthquake, inversion of the tsunami waveforms recorded at nearby coastal tide gauge and Deep Ocean Assessment and Reporting of Tsunamis (DART) stations combined with coastal geodetic data suggest two asperities: a northern one beneath the coast of Constitucion and a southern one around the Arauco Peninsula. The total fault length is approximately 400 km with seismic moment of 1.7 × 10²² Nm (Mw 8.8). The offshore DART tsunami waveforms require fault slips beneath the coasts, but the exact locations are better estimated by coastal geodetic data. The 22 May 1960 earthquake produced very large, ~30 m, slip off Valdivia. Joint inversion of tsunami waveforms, at tide gauge stations in South America, with coastal geodetic and leveling data shows total fault length of ~800 km and seismic moment of 7.2 × 10²² Nm (Mw 9.2). The seismic moment estimated from tsunami or joint inversion is similar to previous estimates from geodetic data, but much smaller than the results from seismic data analysis.  相似文献   

Alteration processes recorded by back-arc mantle peridotites from oceanic core complexes,Shikoku Basin,Philippine Sea     

Ken-ichi Hirauchi  Izumi Segawa  Yui Kouketsu  Yumiko Harigane  Yasuhiko Ohara  Jonathan Snow  Atlanta Sen  Masakazu Fujii  Kyoko Okino 《Island Arc》2021,30(1):e12419

We determined the mineralogical and petrological characteristics of ultramafic rocks dredged from two oceanic core complexes: the Mado Megamullion and 23°30′N non-transform offset massif, which are located within the Shikoku back-arc basin in the Philippine Sea. The ultramafic rocks are strongly serpentinized, but can be classified as harzburgite/lherzolite or dunite, based on relict primary minerals and their pseudomorphs. Strongly elongated pyroxene porphyroclasts with undulatory extinction indicate high-temperature (≥700 °C) strain localization on a detachment fault within the upper mantle at depths below the brittle–viscous transition. During exhumation, the peridotites underwent impregnation by magmatic or hydrothermal fluids, lizardite/chrysotile serpentinization at ≤300 °C, antigorite crystallization, and silica metasomatism that formed talc. These features indicate that the detachment fault zones formed a fluid pathway and facilitated a range of fluid–peridotite interactions.  相似文献   

Availability of an equation to evaluate error by optical path discretization in radiative transfer computation based on the successive order of scattering method   总被引：1，自引：0，他引：1  

Akihiko Tanaka  Masahiko Fujii  Tomohiko Oishi 《Journal of Oceanography》2012,68(1):215-218

The availability of an equation to evaluate the influence of multiple scattering in the single scattering process corresponding to a layer of arbitrary optical thickness was established. In order to confirm the validity of this equation, the radiance distribution in this layer was computed using a plane–parallel layer model based on the successive order of scattering method. The relative errors in a radiance distribution computed were evaluated as a function of optical thickness by the derived equation. It was shown that this equation provides a theoretical background for determining layer thickness using the plane–parallel layer model.  相似文献   

Laboratory experiments and thermal calculations for the development of a next-generation glacier-ice exploration system: Development of an electro-thermal drilling device     

Yuko Suto  Sosuke Saito  Ken-ichi Osada  Hiroshi Takahashi  Hideaki Motoyama  Yoshiyuki Fujii  Yoichi Tanaka 《Polar Science》2008,2(1):15-26

A next-generation drilling system, equipped with a thermal drilling device, is proposed for glacier ice. The system is designed to penetrate glacier ice via melting of the ice and continuously analyze melt-water in a contamination-free sonde. This new type of drilling system is expected to provide analysis data in less time and at less cost than existing systems. Because of the limited number of parameters that can be measured, the proposed system will not take the place of conventional drilling systems that are used to obtain ice cores; however, it will provide a useful method for quickly and simply investigating glacier ice.An electro-thermal drilling device is one of the most important elements needed to develop the proposed system. To estimate the thermal supply required to reach a target depth in a reasonable time, laboratory experiments were conducted using ice blocks and a small sonde equipped solely with heaters. Thermal calculations were then performed under a limited range of conditions. The experiments were undertaken to investigate the effects of the shape and material of the drill head and heater temperature on the rate of penetration into the ice. Additional thermal calculations were then performed based on the experimental results.According to the simple thermal calculations, if the thermal loss that occurs while heat is transferred from the heater to ice (in melting the ice) is assumed to be 50%, the total thermal supply required for heaters in the sonde and cable is as follows: (i) 4.8 kW (sonde) plus 0 W (cable) to penetrate to 300 m depth over 10 days into temperate glacier ice for which the temperature is 0 °C at all depths and to maintain a water layer along 300 m of cable; (ii) 10 kW (sonde) plus 19–32 kW (cable) to penetrate to 1000 m depth over 1 month into cold glacier ice for which the temperature is −25 °C at the surface and 0 °C at 1000 m depth and to maintain a water layer along 1000 m of cable; and (iii) 19 kW (sonde) plus 140–235 kW (cable) to penetrate to 3000 m depth over 2 months into an ice sheet for which the temperature is −55 °C at the surface and 0 °C at 3000 m depth and to maintain a water layer along 3000 m of cable. The thermal supply required for the cable is strongly affected by the thickness of the water layer, cable diameter, and the horizontal distance from the ice wall at which the ice temperature was maintained at its initial temperature. A large thermal supply is required to heat 3000 m of cable in an ice sheet (scenario (iii) above), but penetration into glacier ice (scenarios (i) and (ii) above) could be realistic with the use of a currently employed generator.  相似文献   

Distribution of nitrous oxide dissolved in water masses in the eastern subtropical North Pacific and its origin inferred from isotopomer analysis     

Ayako Fujii  Sakae Toyoda  Osamu Yoshida  Shuichi Watanabe  Ken’ichi Sasaki  Naohiro Yoshida 《Journal of Oceanography》2013,69(2):147-157

N₂O concentration and its isotopomer ratios were measured over a wide area from San Diego to Honolulu in the eastern subtropical North Pacific (ESNP). Waters in the study area had an N₂O maximum (38.2–50.5 nmol kg^?1) at 600–1000 m depth, which is similar to the profiles obtained previously in other areas in the North Pacific. We separated the seawater into five water masses (two for the surface layer, two for the middle layer, and one for the deep layer) and deduced N₂O production–consumption mechanisms in each water body by use of N₂O isotopomer ratios. The results showed that the mechanisms differ slightly among water masses. In the “coastal” surface layer, N₂O is produced by nitrification (NH₂OH oxidation). In the “open ocean” surface layer, it is produced mainly by nitrifier denitrification and to a lesser extent by nitrification under substrate-limited conditions. In both “upwelling” and “open ocean” middle layers it is produced mainly by denitrification and to a lesser extent by nitrifier denitrification. It is also partly reduced. In the deep layer, it is produced predominantly by denitrification with partial reduction. In this way, isotopomers aid elucidation of production–consumption mechanisms of N₂O in the sea even though the mechanisms cannot always be ascertained.  相似文献   

Estimating the impact parameters of cosmic dust particles using a piezoelectric lead zirconate titanate detector     

S. Takechi  T. Miyachi  M. Fujii  N. Hasebe  K. Nogami  H. Ohashi  S. Sasaki  H. Shibata  T. Iwai  E. Grün  R. Srama  N. Okada 《Journal of Atmospheric and Solar》2009,71(2):191-193

A cosmic dust detector for installation on a satellite is currently being developed using piezoelectric lead zirconate titanate (PZT), which can possess both functions of the collector and the transducer. The characteristics of the PZT detector have been studied by bombarding it with hypervelocity particles supplied by a Van de Graaff accelerator. The front surface of the detector used in this study was covered with a white paint to reduce any increase in the temperature due to the solar radiation. There was a linear relationship between the rise time of the signal produced by the detector and the particle's velocities, which were above 10 km/s on impact. This implies that individual particle velocities on impact can be inferred through the empirical formula derived from the data obtained from the PZT detector.  相似文献   

Ecological variations in diatom assemblages in the Paleo-Kathmandu Lake linked with global and Indian monsoon climate changes for the last 600,000 years     

Tatsuya Hayashi  Yoshihiro Tanimura  Yoshihiro Kuwahara  Masao Ohno  Mami Mampuku  Rie Fujii  Harutaka Sakai  Toshiro Yamanaka  Takeshi Maki  Masao Uchida  Wataru Yahagi  Hideo Sakai 《Quaternary Research》2009,72(3):377-387

Variations in fossil diatom assemblages and their relationship with global and Indian monsoon climate changes for the last 600,000 yr were investigated using a core of ancient lake (Paleo-Kathmandu Lake) sediments drilled at the Kathmandu Basin, Nepal Himalaya. Chronological scales of the core were constructed by tuning pollen wet and dry index records to the SPECMAP δ¹⁸O stack record. Examinations of biogenic silica contents and fossil diatom assemblages revealed that variations in productivity and compositions of diatom assemblages were closely linked with global and Indian monsoon climate changes on glacial and interglacial time scales. When summer monsoonal rainfall increased during interglacials (interstadials), diatom productivity increased because of increased inputs of terrestrial nutrients into the lake. When summer monsoonal rainfall reduced and/or winter monsoonal aridification enhanced during glacials (stadials), productivity of the diatoms decreased and lake-level falling brought about changes in compositions of diatom assemblages. Monospecific assemblages by unique Cyclotella kathmanduensis and Puncticulata versiformis appeared during about 590 to 390 ka. This might be attributed to evolutionary fine-tuning of diatom assemblages to specific lake environmental conditions. Additionally, low-amplitude precessional variations in monsoon climate and less lake-level changes may have also allowed both species to dominate over the long periods.  相似文献   

Fifteen years progress of the TRITON array in the Western Pacific and Eastern Indian Oceans     

Kentaro Ando  Yoshifumi Kuroda  Yosuke Fujii  Tatsuya Fukuda  Takuya Hasegawa  Takanori Horii  Yasuhisa Ishihara  Yuji Kashino  Yukio Masumoto  Keisuke Mizuno  Motoki Nagura  Iwao Ueki 《Journal of Oceanography》2017,73(4):403-426

The Triangle Trans‐Ocean Buoy Network (TRITON) project by the Japan Agency for Marine-Earth Science and Technology began with deployment in the western tropical Pacific Ocean in 1998 and has shifted to steady, long-term observations since 1999. After on-site inter-comparison with the Autonomous Temperature Line Acquisition System mooring system of the Tropical Atmosphere and Ocean (TAO) array by the National Oceanic and Atmospheric Administration, the TRITON array became the international TAO/TRITON array in 2000 as a key component of the Global Ocean and Climate Observing Systems. The TAO/TRITON array took over from the TAO array, which was developed during the Tropical Ocean and Global Atmosphere program (1985–1994), and replaced the western part of TAO with new additional real-time measurements of salinity and ocean currents. In 2001, two TRITON moorings were deployed in the eastern Indian Ocean for capturing the eastern pole of the Indian Ocean Dipole. From this initiative, the Indian Ocean Observing System (IndOOS) was designed, and the Indian Ocean mooring array (Research Moored Array for Africa–Asian–Australian Monsoon Analysis and Prediction) was developed as a key component of IndOOS. In this paper, 15 years of progress in the TRITON project in the western Pacific and eastern Indian Oceans is reviewed with regards to scientific outcomes, technological development, and collaborations with international and domestic partners. Future directions for sustainable observation in the Pacific and Indian Oceans are also discussed.  相似文献