A numerical investigation of the formation and evolution of magnetospheric irregularities by the interchange of magnetic flux tubes     

P.G. Richards  K.D. Cole 《Planetary and Space Science》1979,27(11):1351-1360

The formation and evolution of magnetospheric irregularities by interchange of tubes of force, is studied through the solution of the electron and ion heat, and ion density equations. These calculations indicate that interchange of magnetic flux tubes may cause irregularities in the ionosphere and protonosphere. Ionospheric irregularities result from disturbance of the F-layer through electrodynamic movement vertically while the protonospheric irregularities result from variations in flux tube volume. It has been found that the temperature profile plays an important role in the variation of irregularity magnitude along flux tubes and that irregularities will persist for many hours at night. After several hours a small growth of the irregularities has been observed.  相似文献   

Solid-state astrochemistry in star-forming regions     

Helen Fraser  David Williams  Ian Sims  Anita Richards  Jeremy Yates 《Astronomy& Geophysics》2003,44(4):4.29-4.33

Surface-catalysed chemical reactions, the molecules they form, and the implications for star formation were key themes in an international workshop on "Solid-state chemistry in star-forming regions" at the Lorentz Centre, Leiden University, the Netherlands from 14–17 April 2003. Helen Fraser, David Williams, Ian Sims, Anita Richards and Jeremy Yates report.  相似文献   

Contrasting magmas in metapelitic and metapsammitic migmatites in the Cooma Complex, Australia     

R. H. Vernon  W. J. Collins  S. W. Richards 《Visual Geosciences》2003,8(1):1-22

Metapelite-derived migmatites (“bedded migmatites”) formed in the low-pressure/high-temperature (LPHT) Cooma Complex, southeastern Australia, contain magma (neosome and leucosome) confined to the metapelitic beds in which they were generated. The metapsammitic beds were more ductile than the metapelitic beds (and the metapelitic parts of graded beds), which underwent fracture and boudinage, thereby providing space for the magma, though some also occurs in axial surface folia. Transitions from bedded to stromatic migmatites can be seen, but the magma mainly remained in the metapelites, even in the most strongly deformed stromatic migmatites. This, together with boudinage and transposition of the leucosome, as well as microstructural evidence of quartz recrystallization, suggest that much or most of the stromatic layering was formed by solid-state deformation. In contrast, magmas (neosomes) formed by partial melting of feldspathic metapsammites at Cooma moved out of their parent rocks, and coalesced into veins and small intrusions of diatexite, because (1) the host rocks deformed more homogeneously, and no interboudin space was made for the melts, and (2) the melt escape threshold was exceeded, probably with the assistance of deformation. Metapsammite melting occurred after solidification of the metapelite-derived magma, and the mobile metapsammite-derived magma (diatexite) disrupted and incorporated fragments of the metapelitic migmatites. The metapsammite-derived magma, together with this solid metapelitic material, locally coalesced into bodies closely resembling the Cooma Granodiorite.  相似文献   

Construction and Testing of a Durable Platinum Wire Eh Electrode for In Situ Redox Measurements in the Subsurface     

G. D. W. Swerhone  J. R. Lawrence  J. G. Richards  M. J. Hendry 《Ground Water Monitoring & Remediation》1999,19(2):132-136

We have developed a rugged, durable platinum wire Eh electrode for application in subsurface environments. The electrode design is described in detail and its performance under aerobic and anaerobic steady-state and transient conditions is assessed. The electrode consists of a 0.5-mm-diameter platinum wire (99.99% purity) cast in a glass fiber-reinforced epoxy jacket. The construction allowed installation through direct insertion into sandy media to depths up to several meters. Data collection was through connection to a datalogger with high impedance input; data points were collected every 10 seconds and averaged and stored once an hour. The electrodes functioned in situ for periods of more than three years and gave reliable readings during oxic, anoxic, and transitional conditions. Performance testing and examination of electrodes recovered after three years in situ indicated that they were not impacted by corrosion, dissolution, or poisoning.  相似文献   

3D joint inversion of magnetotelluric and airborne tipper data: a case study from the Morrison porphyry Cu–Au–Mo deposit,British Columbia,Canada          下载免费PDF全文

Benjamin M. Lee  Martyn J. Unsworth  Juliane Hübert  Jeremy P. Richards  Jean M. Legault 《Geophysical Prospecting》2018,66(2):397-421

Z‐axis tipper electromagnetic and broadband magnetotelluric data were used to determine three‐dimensional electrical resistivity models of the Morrison porphyry Cu–Au–Mo deposit in British Columbia. Z‐axis tipper electromagnetic data are collected with a helicopter, thus allowing rapid surveys with uniform spatial sampling. Ground‐based magnetotelluric surveys can achieve a greater exploration depth than Z‐axis tipper electromagnetic surveys, but data collection is slower and can be limited by difficult terrain. The airborne Z‐axis tipper electromagnetic tipper data and the ground magnetotelluric tipper data show good agreement at the Morrison deposit despite differences in the data collection method, spatial sampling, and collection date. Resistivity models derived from individual inversions of the Z‐axis tipper electromagnetic tipper data and magnetotelluric impedance data contain some similar features, but the Z‐axis tipper electromagnetic model appears to lack resolution below a depth of 1 km, and the magnetotelluric model suffers from non‐uniform and relatively sparse spatial sampling. The joint Z‐axis tipper electromagnetic inversion solves these issues by combining the dense spatial sampling of the airborne Z‐axis tipper electromagnetic technique and the deeper penetration of the lower frequency magnetotelluric data. The resulting joint resistivity model correlates well with the known geology and distribution of alteration at the Morrison deposit. Higher resistivity is associated with the potassic alteration zone and volcanic country rocks, whereas areas of lower resistivity agree with known faults and sedimentary units. The pyrite halo and ≥0.3% Cu zone have the moderate resistivity that is expected of disseminated sulphides. The joint Z‐axis tipper electromagnetic inversion provides an improved resistivity model by enhancing the lateral and depth resolution of resistivity features compared with the individual Z‐axis tipper electromagnetic and magnetotelluric inversions. This case study shows that a joint Z‐axis tipper electromagnetic–magnetotelluric approach effectively images the interpreted mineralised zone at the Morrison deposit and could be beneficial in exploration for disseminated sulphides at other porphyry deposits.  相似文献   

Proportion of Sewage Sludge to Soil Influences the Survival of Salmonella Dublin and Escherichia coli          下载免费PDF全文

Stephanie Ellis  Sean Tyrrel  Emma O'Leary  Karl Richards  Bryan Griffiths  Karl Ritz 《洁净——土壤、空气、水》2018,46(4)

  相似文献   

Relic permafrost structures in the Gobi of Mongolia: age and significance     

Lewis A. Owen  Ben Richards  Edward J. Rhodes  W. Dickson Cunningham  Brian F. Windley  J. Badamgarav  D. Dorjnamjaa 《第四纪科学杂志》1998,13(6):539-547

Relict permafrost structures (ice-wedge casts and cryoturbation structures) are present in the Gobi of southern Mongolia. Luminescence dates of sediments are presented to constrain the age of formation of permafrost structures. These data show that there was a phase of permafrost development during the latter part of the Last Glacial (after about 22 to 15 ka) that resulted in cryoturbated sediments and ice-wedge casts. Furthermore, permafrost degradation occurred during late Pleistocene times (13–10 ka) and was absent during the early Holocene. These permafrost structures mark the southernmost evidence of permafrost in northern Asia during late Quaternary times and indicate that the mean annual air temperature was below approximately −6°C during their formation. © 1998 John Wiley & Sons, Ltd.  相似文献   

哥本哈根胡想     

Meryl 《地图》2010,(1):20-20

<正>猛然间醒了,看窗外,还是黑黜黜的夜色,拧亮台灯,闹钟标示:3:07。意识异常清明,想是一时半会儿睡不着了,干脆从台子上抄过一本杂志,消磨心神。是本好杂志,封面标题就有噱头:《全球变暖,末日图景》。好家伙,连新闻周刊都开始排  相似文献   

P–T paths reconstruction of a collisional event: The example of the Thiviers-Payzac Unit in the Variscan French Massif Central     

Manuel Duguet  Nicole Le Breton  Michel Faure 《Lithos》2007,98(1-4):210-232

Because of late metamorphic and tectonic overprints, the reconstruction of prograde parts of P–T paths is often difficult. In the SW Variscan French Massif Central, the Thiviers-Payzac Unit (TPU) is the uppermost allochthon emplaced above underlying units. The TPU experienced a Barrovian metamorphism coeval with a top-to-the-NW ductile shearing (D2 event) in Early Carboniferous times (ca. 360–350 Ma). The tectonic setting of the D2 event, compression or synconvergence extension, remains unclear. Using the THERMOCALC software and the model system MnNCKFMASH, the peak P–T conditions are estimated from garnet rims and matrix minerals and the prograde evolution is deduced from garnet core compositions. The combination of these two approaches demonstrates that the TPU experienced pressure and temperature increases before reaching peak conditions at 6.6–9.0 +/− 1.2 kbar and 615–655 +/− 35 °C. This kind of P–T path shows that the regional D2 event corresponds to crustal thickening.  相似文献   

Characteristics of deep groundwater flow in a basin marginal setting at Sellafield,Northwest England: Cl and halide evidence     

Richard Metcalfe  Mark B. Crawford  Adrian H. Bath  Anna K. Littleboy  Paul J. Degnan  Hugh G. Richards 《Applied Geochemistry》2007

A number of chemical and physical processes inside and outside a sedimentary basin (e.g. evaporite dissolution and topographic drive, respectively) affect groundwater flow near the basin’s margin. Contrasting formations at the margin, typically basinal sedimentary rocks and basement, are host to the interplay between these processes so that groundwater flows and compositions change within a relatively small volume. To interpret how groundwater flow and geochemistry have evolved, interactions between these processes must be understood. Such interactions were investigated near the margin of the East Irish Sea Basin in NW England, by sampling deep groundwaters (to 1500 m below sea level) from Ordovician volcanic basement rocks and Carboniferous to Triassic sedimentary cover rocks. Variable Br/Cl ratios and Cl concentrations in deep saline waters and brines indicate mixing patterns. Variations in ³⁶Cl/Cl constrain the timing of mixing. Relatively low Br/Cl ratios (ca. 1 × 10⁻³ by mass) characterise brine from the western sedimentary cover and reflect halite dissolution further west. Saline water with relatively high Br/Cl ratios (ca. 2 × 10⁻³ by mass) of uncertain origin occupies the eastern basement. These two waters mix across the area. However, mixing alone cannot explain variable ³⁶Cl/Cl ratios, which partly reflect differing in situ³⁶Cl production rates in different rock formations. Most ³⁶Cl/Cl ratios in groundwater sampled from the eastern metavolcanic basement (mean = 25 × 10⁻¹⁵) and western sedimentary cover (mean = 10 × 10⁻¹⁵) are at or close to equilibrium with in situ³⁶Cl production. These variations in ³⁶Cl/Cl across the site possibly took >1.5 Ma to be attained, implying that deep groundwater flow responded only slowly to the Quaternary glaciation of the site. Interplay between varied processes in basin marginal settings does not necessarily imply flow instability.  相似文献