Precursory slope distress prior to the 2010 Mount Meager landslide,British Columbia   总被引：1，自引：1，他引：0  

Gioachino Roberti  Brent Ward  Benjamin van Wyk de Vries  Pierre Friele  Luigi Perotti  John J. Clague  Marco Giardino 《Landslides》2018,15(4):637-647

In 2010, the south flank of Mount Meager failed catastrophically, generating the largest (53 ± 3.8 × 10⁶ m³) landslide in Canadian history. We document the slow deformation of the edifice prior to failure using archival historic aerial photographs spanning the period 1948–2006. All photos were processed using Structure from Motion (SfM) photogrammetry. We used the SfM products to produce pre-and post-failure geomorphic maps that document changes in the volcanic edifice and Capricorn Glacier at its base. The photographic dataset shows that the Capricorn Glacier re-advanced from a retracted position in the 1980s then rapidly retreated in the lead-up to the 2010 failure. The dataset also documents 60 years of progressive development of faults, toe bulging, and precursory failures in 1998 and 2009. The 2010 collapse was conditioned by glacial retreat and triggered by hot summer weather that caused ice and snow to melt. Meltwater increased pore water pressures in colluvium and fractured rocks at the base of the slope, causing those materials to mobilize, which in turn triggered several secondary failures structurally controlled by lithology and faults. The landslide retrogressed from the base of the slope to near the peak of Mount Meager involving basement rock and the overlying volcanic sequence. Elsewhere on the flanks of Mount Meager, large fractures have developed in recently deglaciated areas, conditioning these slopes for future collapse. Potential failures in these areas have larger volumes than the 2010 landslide. Anticipated atmospheric warming over the next several decades will cause further loss of snow and glacier ice, likely producing additional slope instability. Satellite- and ground-based monitoring of these slopes can provide advanced warning of future landslides to help reduce risk in populated regions downstream.  相似文献   

Defining the Potential of Nanoscale Re‐Os Isotope Systematics Using Atom Probe Microscopy          下载免费PDF全文

Luke Daly  Phil A. Bland  Svetlana Tessalina  David W. Saxey  Steven M. Reddy  Denis Fougerouse  William D.A. Rickard  Lucy V. Forman  Alexandre La Fontaine  Julie M. Cairney  Simon P. Ringer  Bruce F. Schaefer  Daniel Schwander 《Geostandards and Geoanalytical Research》2018,42(3):279-299

Atom probe microscopy (APM) is a relatively new in situ tool for measuring isotope fractions from nanoscale volumes (< 0.01 μm³). We calculate the theoretical detectable difference of an isotope ratio measurement result from APM using counting statistics of a hypothetical data set to be ± 4δ or 0.4% (2s). However, challenges associated with APM measurements (e.g., peak ranging, hydride formation and isobaric interferences), result in larger uncertainties if not properly accounted for. We evaluate these factors for Re‐Os isotope ratio measurements by comparing APM and negative thermal ionisation mass spectrometry (N‐TIMS) measurement results of pure Os, pure Re, and two synthetic Re‐Os‐bearing alloys from Schwander et al. (2015, Meteoritics and Planetary Science, 50, 893) [the original metal alloy (HSE) and alloys produced by heating HSE within silicate liquid (SYN)]. From this, we propose a current best practice for APM Re‐Os isotope ratio measurements. Using this refined approach, mean APM and N‐TIMS ¹⁸⁷Os/¹⁸⁹Os measurement results agree within 0.05% and 2s (pure Os), 0.6–2% and 2s (SYN) and 5–10% (HSE). The good agreement of N‐TIMS and APM ¹⁸⁷Os/¹⁸⁹Os measurements confirms that APM can extract robust isotope ratios. Therefore, this approach permits nanoscale isotope measurements of Os‐bearing alloys using the Re‐Os geochronometer that could not be measured by conventional measurement principles.  相似文献   

A review of jet grouting practice and development     

Pierre Guy Atangana Njock  Jun Chen  Giuseppe Modoni  Arul Arulrajah  Yong-Hyun Kim 《Arabian Journal of Geosciences》2018,11(16):459

The jet grouting technique was originally initiated in the UK and progressively developed following the needs for larger geometries, ease of implementation, economic rationality, and better mechanical properties. This paper presents a comprehensive review of the development and practice of jet grouting through some fundamental concepts and relevant case studies. Subsequently, a laboratory testing program is performed to investigate the factors affecting the efficacy of the twin grouting system. The principal objective of this study is to define the suitable conditions for the jet grouting efficacy regarding economic rationality as well as quality control. For the first phase, a particular emphasis is placed on the properties of jet columns, site geological conditions, implementation methods, and the justification of each selected treatment option, while the second phase mainly focuses on the unconfined compressive strength (UCS) tests. It follows that the mono-fluid jet grouting system presents a valuable flexibility in dealing with complex configurations; yet, the double- and triple-fluid systems are more indicated for cases of mass treatments for which large portions of space must be treated and overlapping is fundamentally important for the reliability of the treatment. Furthermore, it was established that the efficacy of the twin-jet method primarily relies on the proper adequacy of some critical parameters, namely, the cement content, the water-cement ratio, and cement slurry-water glass ratio. In spite of some uncertainties inherently related to the technique, the UCS test represents the quintessential laboratory index for evaluating the mechanical properties of grouted elements, deriving jet grouting efficacy and the economics of jet grouts.  相似文献   

Statistical forecast of the marine surge     

Quintana  Gonzalo Iñaki  Tandeo  Pierre  Drumetz  Lucas  Leballeur  Laurent  Pavec  Marc 《Natural Hazards》2021,108(3):2905-2917

Natural Hazards - This paper studies different machine learning methods for solving the regression problem of estimating the marine surge value given meteorological data. The marine surge is...  相似文献   

Selection of sand models and identification of parameters using an enhanced genetic algorithm          下载免费PDF全文

Yin‐Fu Jin  Zhen‐Yu Yin  Shui‐Long Shen  Pierre‐Yves Hicher 《国际地质力学数值与分析法杂志》2016,40(8):1219-1240

Numerous constitutive models of granular soils have been developed during the last few decades. As a consequence, how to select an appropriate model with the necessary features based on conventional tests and with an easy way of identifying parameters for geotechnical applications has become a major issue. This paper aims to discuss the selection of sand models and parameters identification by using genetic algorithm. A real‐coded genetic algorithm is enhanced for the optimization with high efficiency. Models with gradually varying features (elastic‐perfectly plastic modelling, nonlinear stress–strain hardening, critical state concept and two‐surface concept) are selected from numerous sand models as examples for optimization. Conventional triaxial tests on Hostun sand are selected as the objectives in the optimization. Four key points are then discussed in turn: (i) which features are necessary to be accounted for in constitutive modelling of sand; (ii) which type of tests (drained and/or undrained) should be selected for an optimal identification of parameters; (iii) what is the minimum number of tests that should be selected for parameter identification; and (iv) what is the suitable and least strain level of objective tests to obtain reliable and reasonable parameters. Finally, a useful guide, based on all comparisons, is provided at the end of the discussion. Copyright © 2015 John Wiley & Sons, Ltd.  相似文献   

Zooplankton community structure in a highly turbid environment (Charente estuary,France): Spatio-temporal patterns and environmental control   总被引：1，自引：0，他引：1  

Julien Modéran  Pierre Bouvais  Valérie DavidSandrine Le Noc  Benoit Simon-BouhetNathalie Niquil  Pierre MiramandDenis Fichet 《Estuarine, Coastal and Shelf Science》2010

Zooplankton assemblages were studied from January 2007 to January 2008 along the salinity gradient of the Charente estuary (France). A Lagrangian survey was performed monthly at five sampling stations defined by salinity (freshwater, 0.5, 5, 15 and 25) in order to collect zooplankton and measure the main environmental parameters (concentrations of suspended particulate matter, particulate organic carbon, chlorophyll a and phaeopigments). A combination of multivariate cluster analysis, species indicator index and canonical correspondence analysis was used to relate the spatio-temporal patterns of the zooplankton assemblages with environmental drivers. The estuary was divided into three different zones by means of environmental parameters while four zooplankton assemblages were identified along the salinity gradient. The Charente estuary appeared as one of the most turbid systems in Europe, with suspended particulate matter (SPM) concentration reaching 3.5 g l⁻¹ in the Maximum Turbidity Zone (MTZ). Algal heterotrophy and microphytobenthos resuspension from the wide mudflats could be responsible for the relatively high chlorophyll a concentrations measured within this MTZ. Salinity and SPM affected significantly the spatial distribution of zooplankton species while temperature and river flow seemed to control their temporal variations. From a zooplanktonic viewpoint, the highly turbid Charente estuary seemed to match an “ecotone–ecocline” model: the succession of species assemblages along the salinity gradient matched the concept of ecocline while the MTZ, which is a stressful narrow area, could be considered as an ecotone. Although such ecoclinal characteristics seemed to be a general feature of estuarine biocenoses, the ecotone could be more system-specific and biological compartment-specific.  相似文献   

Internal erosion of chemically reinforced granular materials: a mathematical modeling approach     

Tony Khalil  Nadia Saiyouri  Bogdan Muresan  Pierre‐Yves Hicher 《国际地质力学数值与分析法杂志》2013,37(5):491-502

Internal erosion (IE) affects the stability of natural and reinforced materials by causing instability within their granular structure. The dislodgement and transport of eroded particles affect both the particulate concentration of eroding fluid and the pore network of eroded material. In this study, we examined these modifications using a transport model with a finite element code. First, IE tests on chemically reinforced sand columns were performed to obtain information about eroded material loss of mass, particulate concentration of effluent, porosity and permeability modifications, and existing IE stages. Second, based on experimental results, a mathematical one‐dimensional model has been formulated to monitor the evolution and spatial distribution of erodible solids, fluidized particles, porosity, permeability, and seepage stresses. The model consists of a set of coupled nonlinear differential equations solved in sequence. It provides valuable information about the extent and the dynamics of structural changes, which can be used to estimate an IE time for the hydraulic work to reach failure. Copyright © 2011 John Wiley & Sons, Ltd.  相似文献   

Oxygen and organic carbon fluxes in sediments of the Bay of Biscay     

Aurélia Mouret  Pierre Anschutz  Bruno Deflandre  Gwénaëlle Chaillou  Christelle Hyacinthe  Jonathan Deborde  Henri Etcheber  Jean-Marie Jouanneau  Antoine Grémare  Pascal Lecroart 《Deep Sea Research Part I: Oceanographic Research Papers》2010,57(4):528-540

The relationship between particulate organic carbon (POC) concentrations measured in modern sediment and fluxes of exported POC to the sediment surface needs to be understood in order to use POC content as a proxy of paleo-environmental conditions. The objective of our study was to compare POC concentrations, POC mineralization rates calculated from O₂ consumption and POC burial rates. Benthic O₂ distributions were determined in 58 fine-grained sediment cores collected at different periods at 14 stations in the southeastern part of the Bay of Biscay with depths ranging from 140 to 2800 m. Depth-dependent volume-specific oxygen consumption rates were used to assess rates of aerobic oxidation of organic matter (OM), assuming that O₂ consumption solely was related to heterotrophic activity at the sediment–water interface. Heterogeneity of benthic O₂ fluxes denoted changes in time and space of fresh organic material sedimentation. The most labile fraction of exported POC engendered a steep decrease in concentration in the upper 5 mm of vertical O₂ profiles. The rupture in the gradient of O₂ microprofile may be related to the bioturbation-induced mixing depth of fast-decaying carbon. Average diffusive O₂ fluxes showed that this fast-decaying OM flux was much higher than buried POC, although diffusive O₂ fluxes underestimated the total sediment oxygen demand, and thus the fast-decaying OM flux to the sediment surface. Sedimentary POC burial was calculated from sediment mass accumulation rate and the organic carbon content measured at the top of the sediment. The proportion of buried POC relative to total exported POC ranged at the most between 50% and 10%, depending on station location. Therefore, for a narrow geographic area like the Bay of Biscay, burial efficiency of POC was variable. A fraction of buried POC consisted of slow-decaying OM that was mineralized within the upper decimetres of sediment through oxic and anoxic processes. This fraction was deduced from the decrease with depth in POC concentration. At sites located below 500 m water depth, where the fast-decaying carbon did not reach the anoxic sediment, the slow-decaying pool may control the O₂ penetration depth. Only refractory organic material was fossilized in sedimentary records at locations where labile OM did not reach the anoxic portion of the sediment.  相似文献   

Lacustrine sedimentation in a semiarid alpine setting: An example from Ladakh, northwestern Himalaya     

Monique Fort  Douglas W. Burbank  Pierre Freytet 《Quaternary Research》1989,31(3)

The Lamayuru lacustrine strata in Ladakh typify many of the carbonate-rich Pleistocene alpine lakes found in the semiarid environment of the northern Himalaya. Created by a 200-m-thick landslide, the lake was in existence by at least 35,000 yr ago, and may have persisted until 500–1000 yr ago. Represented in the center by thin turbidites and laminated muds, the lacustrine sedimentation along the lake margins and low-relief deltas characteristically displays a marked contrast between (1) clastic lenses representing rapid, sporadic, matrix-poor debris flows and periglacial inputs from the alpine slopes and (2) abundant, diverse, shallow-water, biologically dominated carbonate strata, among which organism-rich, chalky beds and oncolithic and encrusted stem-rich strata predominate. Resemblances of the Lamayuru lacustrine strata and their setting to those of former lakes throughout areas north of the Greater Himalayan crest suggest that the alpine, semi-arid environment would favor diversified, spacially restricted carbonate sedimentation punctuated by occasional clastic influxes. Such a depositional regime contrasts strongly with that found immediately south of the Himalayan crest where more humid conditions promote a more continuous clastic influx into intramontane lakes.  相似文献   

Etude de la couche limite de surface sahelienne — Experience Yantala     

Jean-Pierre Pagès  Jean-Pierre Frangi  Pierre Durand  Claude Estournel  Aimé Druilhet 《Boundary-Layer Meteorology》1988,43(1-2):183-203

This paper presents data concerning the energy budget in the surface layer in the Sahel region (a semi-desert area). The results are drawn from a measurement campaign made in the Niamey region in the Niger, in April–May 1984 (the Yantala Campaign). The sensible heat flux is computed with the profile method, the ground heat flux is deduced from measurement of the temperature field, and the radiative net flux is measured directly with a balancemeter. The latent heat flux, which is deduced from the energy budget balance is very weak and within the accuracy limit of the method. The diurnal variation of the net flux is symmetrical, with a maximum at noon. On the other hand, the sensible heat flux variation is asymmetrical, with an afternoon decrease much slower than the morning increase. After 3.30 pm, it becomes higher than the net flux. This is compensated for by the sign change of the ground heat flux, whose maximum is found in the morning at 11 am. The second part of this paper shows the importance of one term in the surface-layer energy budget: the long-wave radiative divergence between the ground and the top of the surface layer in high superadiabatic conditions. We show, with a radiative model on the one hand and direct measurement of the radiative divergence on the other hand, that this term reaches several tens of W m^-2 in the superadiabatic conditions found in the Sahel region.   相似文献