Geotechnical Facets of Active Sediments and its Bearing on Natural Hazards and Mitigation Measures: An Approach on Sediments of the Nubra Valley (Ladakh), Trans-Himalaya,India     

R. K. Dubey  J. A. Dar  Gyan Prakash Satyam 《Journal of the Geological Society of India》2018,91(6):704-710

Slope stability has been identified as a major obstacle to construction in the rapidly developing countries of Indonesia and Malaysia. In these countries, slope failure has been identified as one of the most commonly occurring natural disasters, leading to financial losses and deaths. Slope failure is often related to prolonged rainfall events where rainfall infiltration increases pore water pressure, reducing soil strength. This failure mechanism will accelerate with the existence of cracks, which are usually caused by differential settling, drying and shrinking of soil, and associated construction activities, among other causes. The existence of cracks on slopes usually provides an easy pathway for rainfall infiltration into soil, allowing rain to infiltrate to deeper layers than in the absence of cracks. The moisture content in deep layers is therefore higher in cracked slopes than in slopes without cracks. To address this issue, we investigated the effects of cracks on slope stability when subjected to rainfall. The influence of crack location, depth, size, and direction on pore water pressure distribution and slope stability was studied by imposing different rainfall intensities. Analysis of seepage and stability were conducted using the GEO STUDIO 2007 softwares SEEP/W and SLOPE/W. Results suggested that pore water pressure and slope stability were influenced by the existence of cracks. Analysis showed that slope factors of safety decreased sharply when cracks were located adjacent to the slope crest, as compared to when cracks were located in the middle of the slope. Furthermore, slope factors of safety decreased with increasing crack depth. Pore water pressure and slope factors of safety decreased further when slopes were subjected to small rainfall intensities for long periods, as compared to when slopes were subjected to high rainfall intensities for short periods. The present study shows that study of cracks should be an integral part of the slope stability analysis.  相似文献   

Gravity Anomalies and Crustal Thickness Variations over the Western Ghats     

C. P. Dubey  V. M. Tiwari 《Journal of the Geological Society of India》2018,92(5):517-522

The Western Ghats (WG), a topographic scarp facing towards the west coast of India and extending over diverse geological terranes – Deccan Volcanic Province (DVP), Dharwar Craton (DC) and Southern Granulite Terrain (SGT), is an enigmatic geomorphic feature. WG is characterized by low gravity anomalies. In order to decipher the sources of gravity anomalies, we have decomposed the gravity anomalies using wavelength filter and have obtained estimates of the depth to crust-mantle boundary (CMB) under WG and surrounding regions from the inversion of gravity data, which is compared with seismically determined CMB estimates. Overall, the CMB depth varies from 33 to 50 km, which is consistent with seismically determined values, except in the region of shear zones between DC and SGT probably indicating a different density contrast at CMB. The major source of gravity low is found to be the deepening of CMB under the WG compared to adjacent regions regardless of surface lithology. The CMB depths under WG and surrounding region generally approximate the CMB depths estimated for low strength flexural isostatic models, which suggests that flexural compensation of uplifted topography, later modified by tectonic and denudation processes, is a likely development model for the Western Ghats.  相似文献   

Water Level Retrieval Using SARAL/AltiKa Observations in the Braided Brahmaputra River,Eastern India     

Amit Kumar Dubey  Praveen Gupta  Subashisa Dutta  Raghvendra Pratap Singh 《Marine Geodesy》2015,38(3):549-567

In this study, water level retrieval over the Brahmaputra river was done using different retracking algorithms for the 40 Hz waveform data of SARAL/AltiKa satellite. Water level was retrieved at 10 different locations of the river to evaluate the performance and accuracy of Ka band altimeter over the braided river system. Different retracking algorithms such as ice-1, ice-2, threshold, and beta parameter were used to retrieve water levels. A correlation and error analysis between the in-situ and satellite altimetry derived river levels was carried out for all the stations. Performance and accuracy analysis has established that water level can be retrieved with less than 40 cm root mean square error (RMSE) for most of the braided reaches of the river. The statistical analysis have found that Beta parameter algorithm has performed best in most of the cases amongst the different retracking algorithms used in this study. The water levels derived from 10 different locations were used to generate water surface elevation profiles for the monsoon and nonmonsoon periods. The water levels and the water surface profiles derived from satellite altimetry indicate the potential use of altimeters for the parameterization and calibration of river hydrological, hydrodynamic and sediment transport models.  相似文献   

On the advantage of sharing a holdfast: effects of density and occurrence of kin aggregation in the kelp Lessonia berteroana          下载免费PDF全文

Nicolás I. Segovia  Julio A. Vásquez  Sylvain Faugeron  Pilar A. Haye 《Marine Ecology》2015,36(4):1107-1117

We investigated the density‐dependent and genetic relatedness that regulate the occurrence of inter‐individual (genet) fusion forming plurigenotypic organisms in the brown alga Lessonia berteroana. Recruitment generally occurs at high densities in the inter‐tidal, allowing contact of neighbouring holdfasts as they grow and expand on the substrate. Algal density, by contrast, is regulated by the effects of herbivory and wave impact, which often lead to low holdfast density. Herein, we investigated whether the occurrence of plurigenotypic organisms and their genotypic composition (number of genotypes per plurigenotypic organism) are density dependent and affected by kin selection in the inter‐tidal kelp L. berteroana. Four microsatellite loci were used to analyse DNA from 260 samples obtained from shared and non‐shared holdfasts, at two sites with high and two site with low holdfast density. Analyses showed that fusions forming plurigenotypic organisms are extremely common. Interestingly, the frequency of fusions was higher in low‐density sites, in which 100% of the plants had at least two genotypes and the average was 3.5. In high‐density sites, 62% of plants were plurigenotypic, with an average of 2.8 genotypes per plant. Additionally, we found that genotypes that shared a holdfast had a significantly higher genetic relatedness than the average in the population, compatible with a kin structure. Density dependence and kin structure suggest that the occurrence of plurigenotypic organisms is linked to environmental quality, and that kin or multilevel selection may be favouring the fusion of genetically related genets.  相似文献   

A SEM-based method to determine the mineralogical composition and the particle size distribution of suspended sediment     

Sylvain Pinet  Bruno Lartiges  Jean-Michel Martinez  Sylvain Ouillon 《国际泥沙研究》2019,34(2):85-94

A robust method for characterizing the mineralogy of suspended sediment in continental rivers is introduced. It encompasses 3 steps: the filtration of a few milliliters of water, measurements of X-ray energy dispersive spectra using Scanning Electron Microscopy (SEM), and robust machine learning tools of classification. The method is applied to suspended particles collected from various Amazonian rivers. A total of more than 204,000 particles were analyzed by SEM-EDXS (Energy Dispersive X-ray Spectroscopy), i.e. about 15,700 particles per sampling station, which lead to the identification of 15 distinct groups of mineralogical phases. The size distribution of particles collected on the filters was derived from the SEM micrographs taken in the backscattered electron imaging mode and analyzed with ImageJ freeware. The determination of the main mineralogical groups composing the bulk sediment associated with physical parameters such as particle size distribution or aspect ratio allows a precise characterization of the load of the terrigenous particles in rivers or lakes. In the case of the Amazonian rivers investigated, the results show that the identified mineralogies are consistent with previous studies as well as between the different samples collected. The method enabled the evolution of grain size distribution from fine to coarse material to be described in the water column. Implications about hydrodynamic sorting of mineral particles in the water column are also briefly discussed. The proposed method appears well suited for intensive routine monitoring of suspended sediment in river systems.  相似文献   

Effect of Biochar and Amendments on Pb and As Phytotoxicity and Phytoavailability in a Technosol     

Romain Nandillon  Florie Miard  Manhattan Lebrun  Marie Gaillard  Stphane Sabatier  Sylvain Bourgerie  Fabienne Battaglia‐Brunet  Domenico Morabito 《洁净——土壤、空气、水》2019,47(3)

  相似文献   

Bosumtwi impact structure,Ghana: Evidence for fluidized emplacement of the ejecta     

David Baratoux  Cheikh Ahmadou Bamba Niang  Wolf Uwe Reimold  Marian Selorm Sapah  Mark Walter Jessell  Daniel Boamah  Gayane Faye  Sylvain Bouley  Olivier Vanderhaeghe 《Meteoritics & planetary science》2019,54(10):2541-2556

The about 10.5 km diameter Bosumtwi impact crater is one of the youngest large impact structures on Earth. The crater rim is readily noticed on topographic maps or in satellite imagery. It defines a circular basin filled by water (Lake Bosumtwi) and lacustrine sediments. The morphology of this impact structure is also characterized by a circular plateau extending beyond the rim and up to 9–10 km from the center of the crater (about 2 crater radii). This feature comprises a shallow ring depression, also described as an annular moat, and a subdued circular ridge at its outer edge. The origin of this outermost feature could so far not be elucidated based on remote sensing data only. Our approach combines detailed topographic analysis, including roughness mapping, with airborne radiometric surveys (mapping near‐surface K, Th, U concentrations) and field observations. This provides evidence that the moat and outer ring are features inherited from the impact event and represent the partially eroded ejecta layer of the Bosumtwi impact structure. The characteristics of the outer ridge indicate that ejecta emplacement was not purely ballistic but requires ejecta fluidization and surface flow. The setting of Bosumtwi ejecta can therefore be considered as a terrestrial analog for rampart craters, which are common on Mars and Venus, and also found on icy bodies of the outer solar system (e.g., Ganymede, Europa, Dione, Tethys, and Charon). Future studies at Bosumtwi may therefore help to elucidate the mechanism of formation of rampart craters.  相似文献   

Solar Wind Streams And Intense Geomagnetic Storms Observed During 1986–1991     

Dubey  S. C.  Mishra  A. P. 《Earth, Moon, and Planets》1999,84(1):23-31

We have analyze the set of 70 intense geomagnetic storms associatedwith D_st decrease of more than 100 nT, observed duringthe period (1986–1991). We have compile these selected intensegeomagnetic storm events and find out their association with twotypes of solar wind streams and different interplanetary parameters.We concluded that the maximum numbers of intense geomagneticstorms are associated with transient disturbances in solar wind streams,which causes strong interplanetary shocks in interplanetary medium.The association of supersonic shocks and magnetic clouds with intensegeomagnetic storms have also been discussed.  相似文献   

Determination of the gravimetric factor at the Chandler period from Earth orientation data and superconducting gravimetry observations   总被引：1，自引：0，他引：1  

Sylvain Loyer  Jacques Hinderer  & Jean-Paul Boy 《Geophysical Journal International》1999,136(1):1-7

  相似文献   

An elastic–viscous–plastic sea ice model formulated on Arakawa B and C grids     

Sylvain Bouillon  Miguel ngel Morales Maqueda  Vincent Legat  Thierry Fichefet 《Ocean Modelling》2009,27(3-4):174-184

The elastic–viscous–plastic (EVP) sea ice rheology has been introduced in the large-scale Louvain-la-Neuve sea-Ice Model, version 2 (LIM2), and its performance has been evaluated. Centred difference versions of the rheology have been implemented on both an Arakawa B grid and a C grid, and their performance have been intercompared in coupled simulations with the Nucleus for European Modelling of the Ocean (NEMO) model. Integrations with both implementations lead to fairly similar results which compare well with observations and with previous LIM simulations. The C grid version, however, offers a number of advantages: (a) easier ice coupling with NEMO, which is itself defined on a C grid; (b) possibility of representing ice transport across one-cell-wide straits and passages; (c) better representation of inertial-plastic compressive waves. For these reasons, we recommend the use of the C grid EVP formulation of the ice dynamics in future LIM applications.  相似文献