排序方式： 共有74条查询结果，搜索用时 15 毫秒
51.
This study presents results from shake table experiments of a wood‐frame building conducted at the University of California, Berkeley. A 13.5‐ft × 19.5‐ft two‐story wood‐frame building representing San Francisco 1940s design of a residential building with a garage space on the first story (house‐over‐garage) was tested. The test building was subjected to scaled ground motion based on Los Gatos record from Loma Prieta 1989 earthquake. The strong motion time history was scaled to match design spectra of a site in Richmond district of San Francisco. The test results demonstrated the seismic vulnerability of the test building due to soft story mechanism and significant twisting when shaken in two horizontal directions. In addition to conventional instrumentation for measuring acceleration and position of selected points of the test building, high‐definition laser scanning technology was employed to assess global and local anomalies of the building after the shake table tests. The analysis conducted in this study showed very good correlation between conventional data recorded from position transducers and the laser scans. These laser scans expanded limits of conventional data at discrete points and allowed analyzing the whole building after shaking. Copyright © 2009 John Wiley & Sons, Ltd. 相似文献
52.
Mehdi Zar&# Seyed-Ahmad Hashemi Roya Ebadi Sahar Amirnejad-Mojdehi Roya Rahmani Ali Sardar 《地震科学（英文版）》2012,25(4):299-305
Iran is located in one of the seismically active regions of the world. Due to the high probability of earthquakes throughout the country and the potential for tsunami inundation along the coasts and offshore, comprehensive studies on the interaction of these natural phenomena are necessary. In this study, the most conservative scenarios are determined for possible earthquakes within the Khark zone (Persian Gulf) based on experimental relations between the fault length, magnitude and displacement, which are parameters for determining tsunamigenic sources. Subsequently, the maximum height of tsunami waves are calculated based on the specifications of the seismic source and its distance from the shore as well as the coastal slope. A zoning map of tsunami hazard is finally presented. 相似文献
53.
Naghibi Seyed Amir Vafakhah Mehdi Hashemi Hossein Pradhan Biswajeet Alavi Seyed Jalil 《Natural Resources Research》2020,29(3):1915-1933
Natural Resources Research - Lack of water resources is a common issue in many countries, especially in the Middle East. Flood spreading project (FSP) is an artificial recharge technique, which is... 相似文献
54.
The Incremental Differential Quadrature Method (IDQM) was applied to a tidal and surge model of the Bristol Channel, UK. The method is considered as an alternative new numerical technique in the field of marine hydraulics and its performance was examined through this case study. For validation of the simulated results, tide gauge data along the Bristol Channel was used. Another well known 1D model (MIKE11) and a quasi-3D model (POLCOMS) provided more insight into the flow pattern of the estuary and additional validation data. Similar to MIKE11, IDQM is unconditionally stable and so time steps of around 45 min achieved good results for the Bristol Channel, whereas for methods which are restricted to the CFL criterion (e.g. explicit finite differencing schemes), the time step is limited to around 3 min. Since there is no stability constraint in IDQM, the time step must be selected with reference to accuracy rather than stability. The usefulness of IDQM was also demonstrated by using a small number of grid points (11 along the 110 km length of the Bristol Channel) to produce accurate results. Based on the results of this case study, it is concluded that IDQM can be successfully implemented for 1D modelling of tidal elevations and surges in non-prismatic irregular channels. 相似文献
55.
The first step in any seismic hazard study is the definition of seismogenic sources and the estimation of magnitude-frequency relationships for each source. There is as yet no standard methodology for source modeling and many researchers have worked on this topic. This study is an effort to define linear and area seismic sources for Northern Iran. The linear or fault sources are developed based on tectonic features and characteristic earthquakes while the area sources are developed based on spatial distribution of small to moderate earthquakes. Time-dependent recurrence relationships are developed for fault sources using renewal approach while time-independent frequency-magnitude relationships are proposed for area sources based on Poisson process. GIS functionalities are used in this study to introduce and incorporate spatial-temporal and geostatistical indices in delineating area seismic sources. The proposed methodology is used to model seismic sources for an area of about 500 by 400 square kilometers around Tehran. Previous researches and reports are studied to compile an earthquake/fault catalog that is as complete as possible. All events are transformed to uniform magnitude scale; duplicate events and dependent shocks are removed. Completeness and time distribution of the compiled catalog is taken into account. The proposed area and linear seismic sources in conjunction with defined recurrence relationships can be used to develop time-dependent probabilistic seismic hazard analysis of Northern Iran. 相似文献
56.
Sadra Shadkani Akram Abbaspour Saeed Samadianfard Sajjad Hashemi Amirhosein Mosavi Shahab S.Band 《国际泥沙研究》2021,36(4):512-523
Monitoring sediment transport is essential for managing and maintaining rivers.Estimation of the sediment load in rivers is fundamental for the study of sediment movement,erosion,and flood control.In the current study,three machine learning models-multi-layer perceptron(MLP),multi-layer perceptron-stochastic gradient descent(MLP-SGD),and gradient boosted tree(GBT)-were utilized to estimate the suspended sediment load(SSL)at the St.Louis(SL)and Chester(CH)stations on the Mississippi River,U.S.Four evaluation criteria including the Correlation Coefficient(CC),Nash Sutcliffe Efficiency(NSE),Scatter Index(SI),and Willmott’s Index(WI)were utilized to evaluate the performance of the used models.A sensitivity analysis of the models to the input variables revealed that the current day discharge variable had the most effect on the SSL at both stations,but in the absence of current-day discharge data(Qt),a combination of input parameters including SSLt-3,SSLt-2,SSLt-1,Qt-3,Qt-2,Qt-1 can be used to estimate the SSL.The comparative outcomes indicated the high accuracy of MLP-SGD-5 model with a CC of 0.983,SI of 0.254,WI of 0.991,and NSE of 0.967 at station CH and the MLP-SGD-6 model with a CC of 0.933,SI of 0.576,WI of 0.961,and NSE of 0.867,respectively,at station SL.The results of MLP models were improved by SGD optimization.Therefore,the MLP-SGD method is recommended as the most accurate model for SSL estimation. 相似文献
57.
58.
59.
Sanaz Salati Frank J.A. van Ruitenbeek Freek D. van der Meer Majid Hashemi Tangestani Harald van der Werff 《International Journal of Applied Earth Observation and Geoinformation》2011
Lithological boundaries provide information useful for activities such as mineral and hydrocarbon exploration, water resource surveys, and natural hazard evaluation. Automated detection of lithological boundaries reduces bias inherent in expert interpretation of boundaries and thus improves the reliability of lithological mapping. The Rotation Variant Template Matching (RTM) algorithm was applied to ASTER imagery to detect pre-defined lithological boundaries. Templates incorporating the mineral combinations gypsum–calcite and calcite–illite were designed to detect boundaries between evaporites, marly limestone, and sandstone. The RTM algorithm successfully detected lithological boundaries by rotating the templates over the ASTER imagery. The accuracy of the detected boundaries was spatially assessed using fuzzy set theory. Boundaries from a published geological map and boundaries interpreted from a stereo pair of aerial photos by five experts were used as references for assessing the accuracy. A confidence region unifying spatial errors was defined for the geological map and stereo-pair interpretation to provide boundary zones from these references. The correspondence between detected boundaries and the boundary zones of the aerial photo was better than between detected boundaries and boundary zones of the geological map. 相似文献
60.
Mohammad Tahsin Karimi Nezhad Manijeh Ghahroudi Tali Mohammad Hashemi Mahmoudi Ebrahim Pazira 《Environmental Earth Sciences》2011,64(5):1203-1213
The aim of this study was to investigate the influences of land use, parent materials (rock types) and soil properties on total arsenic and cadmium concentrations in the agricultural soils. A total of 87 surface (0–20 cm) soil samples were collected from four types of land use: irrigated farming, rangeland, dry farming and orchard. The average concentrations of the analyzed elements in topsoil were 84.426 mg As/kg and 3.289 mg Cd/kg. In addition, the pH, organic matter (OM), cation exchange capacity (CEC), soil grain sizes and CaCO3 were measured for each sample. The results indicated that land use had no significant effect on As and Cd concentrations. Our findings indicated that the Cd concentrations were influenced by bedrock composition, but for As there were no significant differences between various soil parent materials (bedrocks). Soil pollution was assessed on the basis of pollution index (PI), comprehensive pollution index (P n ) and geoaccumulation index (I geo). Calculated indices showed high-pollution levels for As and low- to moderate-pollution levels for Cd. 相似文献