M-Split Estimation in Laser Scanning Data Modeling     

Artur Janowski  Jacek Rapinski 《Journal of the Indian Society of Remote Sensing》2013,41(1):15-19

This paper proposes a new approach to 3D modeling on the basis of laser scanner data. It presents the attempt to automatically detect two planes and an edge in one processing algorithm. The algorithm is based on the M _split estimation, which is a recently developed regression method of multi functional models. Plane equations in three dimensional space are derived on the basis of the presented method. M _split estimation divides the functional model of least squares adjustment in particular into two groups. Both simulated and real data from airborne laser scanning is tested to present the results. In each case the mehod gave good results which encourages for further work on the application of this method for 3D modeling.  相似文献   

Experimental study of a biotite-bearing granitic system under water-saturated and water-undersaturated conditions   总被引：6，自引：0，他引：6  

Jacek Puziewicz  Wilhelm Johannes 《Contributions to Mineralogy and Petrology》1990,104(4):397-406

Phase relationships in haplogranitic melts containing ferromagnesian minerals were investigated in the temperature range 760–850°C, atP _total=2 kbar, =0.25 1.00, and at NNO buffer conditions. The compositions of coexisting biotite, orthopyroxene, magnetite and granitic melt were determined by electron microprobe. Biotite was the only Fe–Mg mineral in the starting material. It disappeared in water-undersaturated melts at temperatures above 830°C and in melts saturated with water above 810°C. Magnetite was present in all runs. Orthopyroxene became stable between 780 and 800°C. The Mg/(Mg+Fe) ratios of biotite (0,63–0,72) and orthopyroxene (0,63–0,71) are similar in water-saturated and undersaturated melts at comparable temperatures and increase slightly with increasing temperature. The solubility of Mg in haplogranitic melts is very low (0,07–0,24 wt% MgO). It increases slightly with temperature and is independent of the prevailing water activity. The solubility of Fe is low (0,91–1,37 wt% FeO); it also increases with increasing temperature, and it is higher in water-saturated than in water-undersaturated melts.  相似文献   

Book reviews     

Geoffrey Abers  Robert D. Cicerone  Douglas J. Galpin  William Power  Tracy Rushmer  J. Leliwa-Kopystynski  Krzysztof Haman  Daniel Wójcik  Michal Herbich  Bogumil Jakubiak  Szymon P. Malinowski 《Pure and Applied Geophysics》1996,147(3):585-610

  相似文献   

Influence of fissuring and karstification of the carbonate aquifer unsaturated zone on its vulnerability to contamination (Cracow Upper Jurassic Region,Poland)     

Jacek Różkowski  Kazimierz Różkowski 《Environmental Earth Sciences》2016,75(12):1023

  相似文献   

X-ray computed microtomography—a useful tool for petrophysical properties determination     

Jadwiga A. Jarzyna  Paulina I. Krakowska  Edyta Puskarczyk  Kamila Wawrzyniak-Guz  Jakub Bielecki  Konrad Tkocz  Jacek Tarasiuk  Sebastian Wroński  Marek Dohnalik 《Computational Geosciences》2016,20(5):1155-1167

  相似文献   

Ground Surface Warming History in Northern Canada Inferred from Inversions of Temperature Logs and Comparison with Other Proxy Climate Reconstructions     

Jacek A. Majorowicz  Walter R. Skinner  Jan Safanda 《Pure and Applied Geophysics》2005,162(1):109-128

— Well temperature logs from 61 sites located in discontinuous and continuous permafrost regions of northern Canada are analyzed. The method of functional space inversion (FSI) is applied to the set of precise temperature logs from wells located between 60 ° and 82 °N. There is strong evidence of extensive ground surface temperature (GST) warming beginning in the late 18^th century and lasting until the 20^th century. This was preceded by a lengthy period of cooling. The approximate average increase of the surface temperature of Canadian Arctic, based on all individual GST histories, is > 1.3 °C for the last 200 years. Simultaneous inversion of all well temperature data suggests an even higher warming (approximately 2 °C). There has been no strong south-to-north gradient in the ground warming magnitude when northern Canadian data are compared with eastern and central Canadian data south of 60 °N which also shows warming close to 2 °C. In Alaska, warming of some 2 °C has been restricted mainly to the 20^th century. In general, however, a high warming magnitude is common for most of Canada and Alaska for the previous century. The averaged GST history (GSTH) for the Canadian Arctic is calibrated with and compares visually with a variety of recently published regional and hemispheric proxy climate reconstructions. These show that GST warming derived from well temperature logs is generally higher than one shown by other proxy (mainly tree-ring reconstructions).Received April, 2003  相似文献   

Impact Experiments on Porous Icy-Silicate Cylindrical Blocks and the Implication for Disruption and Accumulation of Small Icy Bodies     

Masahiko ArakawaJacek Leliwa-Kopystynski  Norikazu Maeno 《Icarus》2002,158(2):516-531

Impact strength and cratering ejecta were studied for porous targets of pure ice and icy-silicate mixture in order to clarify the accumulation and destruction (shattering) condition of small icy bodies. The icy projectile impacted on the cylindrical targets with the porosity up to 55% at a velocity of 150 to 670 m/s at −10°C. The porosity dependence of the impact strength and that of the maximum ejecta velocity were measured in each type of these targets. As a result, the maximum ejecta velocity normalized by the impact velocity (V_e-max/V_i) is found to depend only on the porosity (φ), irrespective of the target type; a relationship is derived to be V_e-max/V_i=−2.17φ+1.29. The impact strength of pure ice increased with increased target porosity, but that of mixture target had an opposite trend; that is, the strength decreased with increased porosity. These porosity dependencies of the impact strength could be explained by the porosity dependence of the physical parameters such as impact pressure, pressure decay, and static strength. Finally, the accumulation of small icy bodies is discussed to show that the collisional events can be divided into three types by the porosity and the collision velocity according to our experimental results: mass loss, rubble pile formation, and regolith formation (compaction).  相似文献   

The drainage pattern of Hansbreen and Werenskioldbreen, two polythermal glaciers in Svalbard   总被引：2，自引：0，他引：2  

Anja Pälli  John C. Moore  Jacek Jania  Leszek Kolondra  Piotr Glowacki 《Polar research》2003,22(2):355-371

To improve our understanding of Svalbard-type polythermal glacier drainage, hydraulic geometry models of the subglacial hydrology of two contrasting glaciers in Svalbard have been constructed. The models are tested against a uniquely long and rich set of field observations spanning 45 years. Digital elevation models (DEMs) were constructed from bedrock data measured with ground penetrating radar and surface data of two medium-sized polythermal glaciers, Hansbreen and Werenskioldbreen, in south-west Spitsbergen. Hansbreen has a low angle bed with over-deepenings and a calving front, while Werenskioldbreen has steeper bed and terminates on land. Together they are representative of many Svalbard glaciers. The DEMs were used to derive maps of hydraulic potential and subglacial drainage networks. Validation of the models was done using field observations including location mapping and speleological exploration of active moulins, positions of main river outflows, dyetracing and water chemistry studies, and observations of water pressure inside moulins. Results suggest that the water pressure is generally close to ice overburden pressure but varies greatly depending on local conditions such as bed location, the thickness of cold ice layer, the thickness of the glacier and seasonal changes in meltwater input.  相似文献   

Crustal thickness, discontinuity depth, and upper mantle structure beneath southern Africa: constraints from body wave conversions     

Jacek Stankiewicz  S  bastien Chevrot  Rob D. van der Hilst  Maarten J. de Wit 《Physics of the Earth and Planetary Interiors》2002,130(3-4):235-251

The technique of receiver function analysis is applied to the study of crustal and upper mantle structures beneath the Kaapvaal craton in southern Africa and its surroundings. Seismic data were recorded by the seismic array of 82 sites deployed from April 1997 to April 1999 across southern Africa, as well as a dense array of 32 sites near Kimberley, in operation from December 1998 to June 1999. Arrival times for phases converted at the Moho are used to determine crustal thickness. The Moho depth in the south–western section of the craton was found to vary between 37 and 40 km, except for one station that recorded a depth of 43 km (SA23). Farther north along the western block of the craton (into Botswana) the depth increases up to 43 km. The depth increases even further in the north–eastern section of the craton, where results vary from 40 to 52 km. Just north of the Kaapvaal craton, in the neighbouring Zimbabwe craton, the crustal thickness drops significantly. The results obtained there varied from 36 to 40 km. For the Kimberley area, using the dense array, the Moho depth was found to be 37.3 km. Arrivals of the Ps and Ppps phases were used to determine the Poisson’s ratio in the region. This was found to be 0.26±0.01. Arrivals of phases from the 410 and 660 km mantle discontinuities are used to interpret the relative positions of these discontinuities, as well as for comparison of mantle temperatures and seismic velocities in the region with global averages. In the Kimberley area the 410 and 660 km discontinuities were found at their expected depth, implying that mantle temperatures in the region are close to the global average. The seismic velocities above the ‘410’ were found up to 5% faster than the averages from the global iasp91 model, which is fast even by Precambrian standards. In other sections of the Kaapvaal craton, the velocities are also faster than global averages, but not as fast as beneath Kimberley. In these sections, the ‘410’ is also slightly elevated, while the ‘660’ is depressed, which implies a slightly lower mantle temperature relative to the global average. Beneath the Kaapvaal craton we find evidence suggesting the presence of a zone with a reduced wavespeed gradient at an upper bound of approximately 300 km, which may mark the lower chemical boundary of the craton.  相似文献   

The effects of mafic-felsic magma interaction on magma diversity: insights from an early Paleozoic hornblendite-quartz monzonite suite in the South China block     

Xu  Wenjing  Xu  Xisheng  Wang  Yuejun  Brzozowski  Matthew Jacek 《Mineralogy and Petrology》2020,114(1):71-90

Mineralogy and Petrology - Understanding the mechanisms responsible for the interplay between mafic and felsic magmas is the key to retrieving information on their sources, and characterizing the...  相似文献