This study is focused on a passive treatment system known as the horizontal reactive treatment well (HRX Well®) installed parallel to groundwater flow, which operates on the principle of flow focusing that results from the hydraulic conductivity (K) ratio of the well and aquifer media. Passive flow and capture in the HRX Well are described by simplified equations adapted from Darcy's Law. A field pilot-scale study (PSS) and numerical simulations using a finite element method (FEM) were conducted to verify the HRX Well concept and test the validity of the HRX Well-simplified equations. The hydraulic performance results from both studies were observed to be within a close agreement to the simplified equations and their hydraulic capture width approximately five times greater than the well diameter (0.20 m). Key parameters affecting capture included the aquifer thickness, well diameter, and permeability ratio of the HRX Well treatment media and aquifer material. During pilot testing, the HRX Well captured 39% of flow while representing 0.5% of the test pit cross-sectional volume, indicating that the well captures a substantial amount of surrounding groundwater. While uncertainty in the aquifer and well properties (porosity, K, well losses), including the effects of boundary conditions, may have caused minor differences in the results, data from this study indicate that the simplified equations are valid for the conceptual design of a field study. A full-scale HRX Well was installed at Site SS003 at Vanderberg Air Force Base, California, in July/August 2018 based on outcomes from this study. 相似文献
The horizontal reactive media treatment well (HRX Well®) uses directionally drilled horizontal wells filled with a treatment media to induce flow-focusing behavior created by the well-to-aquifer permeability contrast to passively capture proportionally large volumes of groundwater. Groundwater is treated in situ as it flows through the HRX Well and downgradient portions of the aquifer are cleaned via elution as these zones are flushed with clean water discharging from the HRX Well. The HRX Well concept is particularly well suited for sites where long-term mass discharge control is a primary performance objective. This concept is appropriate for recalcitrant and difficult-to-treat constituents, including chlorinated solvents, per- and polyfluoroalkyl substances (PFAS), 1,4-dioxane, and metals. A full-scale HRX Well was installed and operated to treat trichloroethene (TCE) with zero valent iron (ZVI). The model-predicted enhanced flow through the HRX Well (compared to the flow in and equivalent cross-sectional area orthogonal to flow in the natural formation before HRX Well installation) and treatment zone width was consistent with flows and widths estimated independently by point velocity probe (PVP) testing, HRX Well tracer testing, and observed treatment in downgradient monitoring wells. The actual average capture zone width was estimated to be between 45 and 69 feet. Total TCE mass discharge reduction was maintained through the duration of the performance monitoring period and exceeded 99.99% (%). Decreases in TCE concentrations were observed at all four downgradient monitoring wells within the treatment zone (ranging from 50 to 74% at day 436), and the first arrival of treated water was consistent with model predictions. The field demonstration confirmed the HRX Well technology is best suited for long-term mass discharge control, can be installed under active infrastructure, requires limited ongoing operation and maintenance, and has low life cycle energy and water requirements. 相似文献
Parameterization of wave runup is of paramount importance for an assessment of coastal hazards. Parametric models employ wave (e.g., Hs and Lp) and beach (i.e., β) parameters to estimate extreme runup (e.g., R2%). Thus, recent studies have been devoted to improving such parameterizations by including additional information regarding wave forcing or beach morphology features. However, the effects of intra-wave dynamics, related to the random nature of the wave transformation process, on runup statistics have not been incorporated. This work employs a phase- and depth- resolving model, based on the Reynolds-averaged Navier-Stokes equations, to investigate different sources of variability associated with runup on planar beaches. The numerical model is validated with laboratory runup data. Subsequently, the role of both aleatory uncertainty and other known sources of runup variability (i.e., frequency spreading and bed roughness) is investigated. Model results show that aleatory uncertainty can be more important than the contributions from other sources of variability such as the bed roughness and frequency spreading. Ensemble results are employed to develop a new parametric model which uses the Hunt (J Waterw Port Coastal Ocean Eng 85:123–152, 1959) scaling parameter \(\beta \left (H_{s}L_{p}\right )^{1/2}\).
Different critical state-related formulas, for the critical state line and the critical state-dependent interlocking effect, have been proposed in constitutive modeling of granular material during last decades, which rises up a confusion on how to select an appropriate model in the geotechnical applications. This paper aims to discuss the selection of these critical state-related formulas and parameters identification. Three formulas of critical state line together with two formulas of critical state-dependent interlocking effect are combined to propose six elasto-plastic models. Drained and undrained triaxial tests on four different granular materials are selected for simulations. In order to eliminate artificial errors, a new hybrid genetic algorithm-based intelligent method is proposed and used to identify parameters and estimate simulations with minimum errors for each granular material and each model. Then, the performance of each CSL and each state parameter is evaluated using two information criteria. Furthermore, the performance was evaluated by simulating three footing tests using finite-element analysis in which the models are implemented. All comparisons demonstrate the incorporation of nonlinear critical state line combined with the state parameter e/ec in constitutive modeling can result in relatively more satisfied simulated results. 相似文献
Using a subset of the SEG Advanced Modeling Program Phase I controlled‐source electromagnetic data, we apply our standard controlled‐source electromagnetic interpretation workflows to delineate a simulated hydrocarbon reservoir. Experience learned from characterizing such a complicated model offers us an opportunity to refine our workflows to achieve better interpretation quality. The exercise proceeded in a blind test style, where the interpreting geophysicists did not know the true resistivity model until the end of the project. Rather, the interpreters were provided a traditional controlled‐source electromagnetic data package, including electric field measurements, interpreted seismic horizons, and well log data. Based on petrophysical analysis, a background resistivity model was established first. Then, the interpreters started with feasibility studies to establish the recoverability of the prospect and carefully stepped through 1D, 2.5D, and 3D inversions with seismic and well log data integrated at each stage. A high‐resistivity zone is identified with 1D analysis and further characterized with 2.5D inversions. Its lateral distribution is confirmed with a 3D anisotropic inversion. The importance of integrating all available geophysical and petrophysical data to derive more accurate interpretation is demonstrated. 相似文献
This issue paper presents how certain policies regarding management of groundwater quality lead to unexpected and undesirable results, despite being backed by seemingly reasonable assumptions. This happened in part because the so-called reasonable decisions were not based on an integrative and quantitative methodology. The policies surveyed here are: (1) implementation of a program for aquifer restoration to pristine conditions followed, after failure, by leaving it to natural attenuation; (2) the "Forget About The Aquifer" (FATA) approach, while ignoring possible damage that contaminated groundwater can inflict on the other environmental systems; (3) groundwater recharge in municipal areas while neglecting the presence of contaminants in the unsaturated zone and conditions exerted by upper impervious surfaces; (4) the Soil Aquifer Treatment (SAT) practice considering aquifers to be "filters of infinite capacity"; and (5) focusing on well contamination vs. aquifer contamination to conveniently defer grappling with the problem of the aquifer as a whole. Possible reasons for the failure of these seemingly rational policies are: (1) the characteristic times of processes associated with groundwater that are usually orders of magnitude greater than the residence times of decision makers in their managerial position; (2) proliferation of improperly trained "groundwater experts" or policymakers with sectoral agendas alongside legitimate differences of opinion among groundwater scientists; (3) the neglect of the cyclic nature of natural phenomena; and (4) ignoring future long-term costs because of immediate costs. 相似文献
In floodplain primary succession, vegetation colonizes nitrogen-poor alluvial deposits and fertility improves as soil nitrogen
accumulates over time. It is generally assumed that vegetation assimilates the vast majority of its nitrogen from the soil;
however, recent studies have suggested that the hyporheic zone also may be an important nitrogen source. We investigated the
potential relative importance of hyporheic nitrogen by comparing fertility indices, specifically total (TN), dissolved inorganic
(DIN), potentially mineralizable (PMN) and ion exchange resin nitrogen (IERN) in both soils and the hyporheic zone at early,
mid and late succession stands on an expansive river flood plain. We also constructed mesocosms to assess growth of cottonwood
cuttings with access to soil and/or hyporheic water. We found TN and PMN increased from early to mid succession in both the
soil (to 10 cm) and hyporheic zone (in a 10 cm layer). While TN, DIN and PMN were an order of magnitude higher in the soil
than in the hyporheic zone, IERN was higher in the hyporheic zone, indicating that subsurface flow through the flood plain
may be important in delivering nitrogen to the root zone. However, even when flux was added to the hyporheic PMN pool, nitrogen
availability in the hyporheic zone (in a 10 cm layer) was vastly lower than soil PMN (to 10 cm). Further, the instantaneous
standing stock of DIN in the surface soil alone was about equal to the sum of the DIN pool, the mean subsurface flux and the
PMN pool in a 10 cm layer of hyporheic zone. In the mesocosm experiment, cottonwood cuttings with access to both soil and
hyporheic water grew fastest; however, they also had the lowest foliar nitrogen concentrations, indicating that this was not
due to greater nitrogen availability. In the field, nitrogen content of cottonwood foliage increased along with soil (but
potentially hyporheic as well) nitrogen accumulation during succession, suggesting the vegetation responded to increasing
nitrogen fertility. We conclude that at least on a per unit-volume basis, the hyporheic zone probably provides little nitrogen
relative to the surface soil, except on new alluvial bars that characteristically are nitrogen poor. Therefore, the hyporheic
zone is probably a much smaller nitrogen source for mature forests relative to the surface soil unless the vegetation exploits
a much larger volume of the hyporheic zone than surface soil. 相似文献