Characters of the Pco2 and CO2 Flux in the East China Sea in Autumn     

纪雷  崔鹤  辛淑平  王军  张龙军  陆贤昆 《中国海洋湖沼学报》2003,21(2):180-186

Pco2 of air and seawater samples from the East China Sea(ECS) were measured in situ in autumn, 1994,Ocean currents,terrestrial fluviation,biological activities,etc.,Pco2 char-acters in air and seawater were investigated,CO2 flux and its character in the East China Sea are discussed on the basis of the Pco2 profiles of air and seawater,It was clear that the nearshore was the source of CO2;and tht the oulter sea area was the sink of CO2; and that the shelf area of the EXS is a net sink for atmospheric CO2 in autumn.  相似文献   

Effect of spatial variation characteristics on contouring of design storm depth     

Ke‐Sheng Cheng  Chiang Wei  Yen‐Ben Cheng  Hui‐Chung Yeh 《水文研究》2003,17(9):1755-1769

The ordinary kriging method, a geostatistical interpolation technique, was applied for developing contour maps of design storm depth in northern Taiwan using intensity–duration–frequency (IDF) data. Results of variogram modelling on design storm depths indicate that the design storms can be categorized into two distinct storm types: (i) storms of short duration and high spatial variation and (ii) storms of long duration and less spatial variation. For storms of the first category, the influence range of rainfall depth decreases when the recurrence interval increases, owing to the increasing degree of their spatial independence. However, for storms of the second category, the influence range of rainfall depth does not change significantly and has an average of approximately 72 km. For very extreme events, such as events of short duration and long recurrence interval, we do not recommend usage of the established design storm contours, because most of the interstation distances exceed the influence ranges. Our study concludes that the influence range of the design storm depth is dependent on the design duration and recurrence interval and is a key factor in developing design storm contours. Copyright © 2003 John Wiley & Sons, Ltd.  相似文献   

广西小平阳岩溶区地裂缝形成因素分析     

张骏  卢玉东  孙建中  范文 《地球科学与环境学报》1996,(4)

８０年代以来，广西小平阳岩溶区出现了大量的地裂缝。通过调查研究．这些地裂缝的形成是受多种因素控制的．其中包括构造、土体性质、水的作用、地形地貌、气候及植被等因素。在上述因素中．构造是主导因素，上体性质是基础因素．其它则为诱发因素，也是因地质环境要素变化所引起的因素。主导因素是通过诱发因素起作用的．并最终通过土体性质因素导致产土地裂缝。  相似文献   

On the cause of total irradiance variations observed by the CCD solar surface photometer     

Jun Nishikawa 《Solar physics》1994,152(1):125-130

Spatially-resolved precise photometric observations of the whole Sun at wavelengths of 545nm (FWHM 40nm) were carried out by using the CCD solar surface photometer. Bright parts of photospheric network have contrast of several tenths of percent, and their contribution to the total irradiance is approximately half that of active region faculae. The solar irradiance variations estimated from sunspots, faculae and active network (contrast>0.3%) agreed with the ACRIM data. The quiet Sun irradiance used in the present results was different from the total irradiance at the solar minimum observed by the ACRIM, which indicates unmeasured components (contrast>0.1%) cause the 11-year cycle irradiance variation.  相似文献   

Elastic solutions for stresses in a transversely isotropic half‐space subjected to three‐dimensional buried parabolic rectangular loads     

Cheng‐Der Wang  Jyh‐Jong Liao 《国际地质力学数值与分析法杂志》2002,26(14):1449-1476

In many areas of engineering practice, applied loads are not uniformly distributed but often concentrated towards the centre of a foundation. Thus, loads are more realistically depicted as distributed as linearly varying or as parabola of revolution. Solutions for stresses in a transversely isotropic half‐space caused by concave and convex parabolic loads that act on a rectangle have not been derived. This work proposes analytical solutions for stresses in a transversely isotropic half‐space, induced by three‐dimensional, buried, linearly varying/uniform/parabolic rectangular loads. Load types include an upwardly and a downwardly linearly varying load, a uniform load, a concave and a convex parabolic load, all distributed over a rectangular area. These solutions are obtained by integrating the point load solutions in a Cartesian co‐ordinate system for a transversely isotropic half‐space. The buried depth, the dimensions of the loaded area, the type and degree of material anisotropy and the loading type for transversely isotropic half‐spaces influence the proposed solutions. An illustrative example is presented to elucidate the effect of the dimensions of the loaded area, the type and degree of rock anisotropy, and the type of loading on the vertical stress in the isotropic/transversely isotropic rocks subjected to a linearly varying/uniform/parabolic rectangular load. Copyright © 2002 John Wiley & Sons, Ltd.  相似文献   

The influence of a non‐associated flow rule on the calculation of the factor of safety of soil slopes     

Yu‐Jie Wang  Jian‐Hua Yin  C. F. Lee 《国际地质力学数值与分析法杂志》2001,25(13):1351-1359

This paper presents a method that incorporates a non‐associated flow rule into the limit analysis to investigate the influence of the dilatancy angle on the factor of safety for the slope stability analysis. The proposed method retain's the advantage of the upper bound method, which is simple and has no stress involvement in the calculation of the energy dissipation and the factor of safety. Copyright © 2001 John Wiley & Sons, Ltd.  相似文献   

Abundance and isotopic composition of noble gases in metal and graphite of the Bohumilitz IAB iron meteorite     

Teruyuki MARUOKA  Jun‐ichi MATSUDA  Gero KURAT 《Meteoritics & planetary science》2001,36(5):597-609

Abstract— Abundances and isotopic compositions of noble gases in metal and graphite of the Bohumilitz IAB iron meteorite were measured. The abundance ratios of spallogenic components in metal reveal a ³He deficiency which is due to the diffusive loss of parent isotopes, that is, tritium (Tilles, 1963; Schultz, 1967). The diffusive loss likely has been induced by thermal heating by the Sun during cosmic‐ray exposure (～160 Ma; Lavielle et al, 1999). Thermal process such as impact‐induced partial loss may have affected the isotopic composition of spallogenic Ne. The ¹²⁹Xe/¹³¹Xe ratio of cosmogenic components in the metal indicates an enhanced production of epi‐thermal neutrons. The abundance ratios of spallogenic components in the graphite reveal that it contained small amounts of metal and silicates. The isotopic composition of heavy noble gases in graphite itself was obtained from graphite treated with HF/HCl. The isotopic composition of the etched graphite shows that it contains two types of primordial Xe (i.e., Q‐Xe and El Taco Xe). The isotopic heterogeneity preserved in the Bohumilitz graphite indicates that the Bohumilitz graphite did not experience any high‐temperature event and, consequently, must have been emplaced into the metal at subsolidus temperatures. This situation is incompatible with an igneous model as well as the impact melting models for the IAB‐IIICD iron meteorites as proposed by Choi et al. (1995) and Wasson et al (1980).  相似文献   

Radar observations of Itokawa in 2004 and improved shape estimation     

Steven J. Ostro  Lance A. M. Benner  Christopher Magri  Jon D. Giorgini  Randy Rose  Raymond F. Jurgens  Donald K. Yeomans  Alice A. Hine  Michael C. Nolan  Daniel J. Scheeres  Stephen B. Broschart  Mikko Kaasalainen  Jean‐Luc Margot 《Meteoritics & planetary science》2005,40(11):1563-1574

Abstract— We present June 2004 radar images of asteroid 25143 Itokawa (1998 SF36) that improve upon the longitude‐latitude coverage of images obtained in 2001 by Ostro et al. (2004) and use the 2001–2004 data to refine that paper's constraints on Itokawa's shape. The 2004 images, the first of the asteroid's southern side, look distinctly different from the 2001 images, revealing leading edges that are much more curved and rugged than the nearly convex leading edges seen at northern latitudes in 2001. Itokawa is shaped like a slightly asymmetrical, bent, lumpy ellipsoid with dimensions along the principal axes within 10% of 594 times 320 times 288 m. To illustrate the uncertainty space associated with shape reconstruction from images with suboptimal orientational coverage, we present two alternative three‐dimensional models of the object.  相似文献   

Determination of physical parameters of NGC 2023 using the hyperfine NH₃ spectrum     

Xing Jun  Xu Lan-Ping 《Chinese Astronomy and Astrophysics》1985,9(4):283-290

An improved approach is given for deriving the physical parameters of a molecular cloud by its NH₃ rotation-inversion hyperfine spectra. The optical depth τ₀(1, 1) of NH₃ (1,1) is obtained by considering the blending effect of the magnetic hyperfine spectral lines, the (1-1) excitation temperature T_ex (1, 1) is calculated by a two level model, the effect of different collision rate and the thermalization of the (1, 1) inversion lines are discussed, the rotation temperature T_R ( 2, 1) between the NH₃ levels (2, 2) and (1, 1) and the column density N( 1, 1) of the NH₃ (1, 1) inversion level are derived, the results of the total column density from different assumptions for the abundance ratio of ortho-NH₃ and para-NH₃ are also discussed.

This approach is used for the molecular cloud NGC 2023 by using the relevant observed data and its optical depth and other physical parameters are obtained.  相似文献   

Conditional cumulants in a weakly non-linear regime     

Jun Pan †  István Szapudi 《Monthly notices of the Royal Astronomical Society》2005,361(1):357-361

  相似文献