正倒垂法变形监测的原理与数据分析     

来冰华  鲍秀武 《北京测绘》2014,(3):1-6

大坝变形监测是一项精度非常高的工作,正倒垂作为一种十分常用的监测方法,在大坝的变形监测中发挥着巨大的作用。首先介绍了正倒垂法变形监测的原理与方法,通过采集隔河岩大坝四个测点的正倒垂观测数据,重点探讨和分析了大坝水平位移与环境量之间的关系及其变化规律,并由此得出一些相关结论,最后提出了正倒垂的一些改进措施。  相似文献   

Geological and Engineering ‘Sweet Spots’ in the Permian Lucaogou Formation, Jimusar Sag, Junggar Basin     

LAI Jin  BAI Tianyu  LI Hongbin  PANG Xiaojiao  BAO Meng  WANG Guiwen  LIU Bingchang  LIU Shichen 《《地质学报》英文版》2023,97(4):1214-1228

  相似文献   

晚更新世以来珠江三角洲钻孔年代及沉积演化     

林鹏辉  李宏卫  詹伟琪  凌恳  宋盈瑾  徐晓琳  赖忠平 《地质论评》2023,69(Z1):333-335

  相似文献   

天山北麓库松木契克山山前断裂东段断层陡坎研究     

黄帅堂  常想德  马建  胡伟华  任静  刘建明  张文秀  赖爱京 《地震地质》2022,44(1):20-34

  相似文献   

基于耐震时程法的钢筋混凝土框架弹塑性地震响应及损伤发展          下载免费PDF全文

张超  周桢干  赖志超  黄凯  朱展  范小燕 《世界地震工程》2022,38(4):044-53

耐震时程法（ETA）仅需少量的非线性时程分析,便可以掌握结构倒塌破坏的全过程。但是,此方法目前较少应用于结构倒塌失效分析。本文探讨了耐震时程曲线的特性及拟合思路,以钢筋混凝土框架为研究对象,应用ETA方法分析了钢筋混凝土框架的地震响应及损伤发展。研究结果:（1）混凝土框架结构的地震响应分析结果表明:采用ETA方法分析时结构顶点位移和层间位移角与采用IDA方法分析时接近,而最大基底剪力会略大;但是,两种方法的结果相关系数均接近于1。（2）强震下的结构倒塌分析结果表明:ETA方法能较为准确的预测结构的塑性铰分布、塑性铰出现概率及塑性铰发展顺序。当采用多条耐震时程加速度曲线作为输入时,评估结果准确性更高。由于ETA方法仅需进行少量几条耐震时程分析且计算高效,因此ETA方法可以成为预测结构失效模式的高效方法。  相似文献   

锰钾矿光催化降解苯酚及其影响因素研究     

于力茜  张嵚  程晓迪  吕红晓  赖发英 《岩石矿物学杂志》2015,34(2):251-256

利用回流法合成隧道结构的锰钾矿,并研究其光化学降解苯酚的效果及影响因素。分别采用X射线衍射、原子吸收光谱、扫描电镜、透射电镜和BET氮气吸附法对锰钾矿的晶体结构(包括晶型、晶胞参数和结晶度)、化学组成、微观形貌和比表面积进行了表征。研究表明,非光照时锰钾矿对苯酚的降解效果较差,光照能显著促进锰钾矿对苯酚的降解;光照条件下,p H值减小能显著促进锰钾矿对苯酚的降解;锰钾矿用量增加至1.00 g/L时能显著促进锰钾矿降解苯酚,但继续增加矿物用量却显著降低苯酚降解率;非光照条件下,p H值减小和矿物用量增加不能显著促进锰钾矿降解苯酚。  相似文献   

中亚萨亚克矿田成矿岩体矿物学和地球化学:岩浆性质与成矿意义   总被引：3，自引：1，他引：2  

安芳  王居里  朱永峰  王建其  魏少妮  赖绍聪  SEITMURATOVA Eleonora 《岩石学报》2015,31(2):555-570

萨亚克大型铜矿田位于哈萨克斯坦北巴尔喀什斑岩成矿带中部,以矽卡岩型矿床为主。通过对矿区石英闪长岩的矿物化学和地球化学研究,发现石英闪长岩呈斑状结构,斑晶为斜长石和角闪石,其中的斜长石斑晶主要为中长石,角闪石斑晶为镁质普通角闪石;岩石属于高钾钙碱性系列,富集Rb、Sr、Ba等大离子亲石元素和轻稀土元素,亏损Nb、Ta和重稀土元素,高Sr/Y、La/Yb比值,与埃达克岩相似。地球化学特征指示萨亚克矿区侵入岩形成于岛弧环境,为矽卡岩-斑岩型成矿提供了有利的构造背景,岩石可能是岛弧玄武质岩浆在高压下经结晶分异而成。根据角闪石温压计及其成分与氧逸度和岩浆中水含量之间的关系,确定萨亚克石英闪长玢岩中角闪石斑晶结晶时岩浆的温度为799~843℃、处于3.6~9.6km深度范围内(P=1.2~3.2kbar)、氧逸度logfO2=-11.5~-12.0(ΔFMQ=2.0~2.8)、平均水含量为1.2%,相对较高的氧逸度和水含量有利于形成富含挥发分和Cu、Au等成矿物质的岩浆,是最终演化形成大型岩浆-热液型铜矿田(斑岩型、矽卡岩型)的有利条件。  相似文献   

扬子地块西缘天全新元古代过铝质花岗岩类成因机制及其构造动力学背景   总被引：4，自引：0，他引：4  

赖绍聪  秦江锋  朱韧之  赵少伟 《岩石学报》2015,31(8):2245-2258

四川西部天全地区花岗岩属于扬子地块西缘岩浆岩带,是"康滇地轴"北段的重要组成部分。岩石形成年龄为851±15Ma(MSWD=0.7),属于新元古代花岗岩,与扬子地块西缘和北缘大量的中酸性侵入体和火山岩具有相近的形成年龄。火夹沟花岗闪长岩为过铝质、低Si O2、具有相对亏损的Sr-Nd-Pb同位素地球化学组成,结合岩石低的Al2O3/Ti O2和高的Ca O/Na2O比值,其应是在镁铁质岩浆底侵的条件下,成熟度较低的杂砂岩部分熔融形成的过铝质熔体,岩石较低的Si O2含量表明其同化了部分镁铁质熔体。而角脚坪花岗岩具有高的Si O2含量,为过铝质、富Na的熔体,而且具有极度亏损的Sr-Nd同位素组成,表明其应是亏损的玄武质岩石(洋壳或是与地幔柱有关的玄武岩)在H2O饱和条件下发生低程度部分熔融形成的过铝质熔体。结合扬子西缘其它新元古代火成岩的地球化学特征及区域构造资料,我们认为天全地区的Na质花岗闪长岩-花岗岩组合代表在高地温梯度条件下,玄武质岩石在H2O饱和条件下发生部分熔融形成的过铝质花岗岩。  相似文献   

金华山煤矿大口径瓦斯抽排孔施工技术          下载免费PDF全文

熊杰  来甲  高卫乾 《探矿工程》2015,42(7):27-29，33

为了减少煤矿瓦斯的危害以及对其综合利用,国家鼓励并大力支持大口径瓦斯抽排孔项目的建设。陕西铜川金华山煤矿一口大口径瓦斯抽排孔,孔径850 mm,终孔深度401.6 m。从钻进方法、钻具级配、钻进技术参数、冲洗液、圆孔、溜孔、井底护管安装固结、充填循环泥浆、下管、固管、透孔放水等方面详细地介绍了大口径瓦斯抽排孔小径透巷后的特殊施工工艺和相关的技术措施。  相似文献   

Ore-forming Fluid Characteristics of the Saishitang Cu-polymetallic Deposit in Qinghai Province, China     

LAI Jianqing  JU Peijiao  MAO Yin  AN Jianghu  WANG Xiongjun 《《地质学报》英文版》2015,89(2):485-504

Saishitang Cu-polymetallic deposit is located in the southeast section of Late Paleozoic arcfold in the southeastern margin of Qaidam platform. Accoring to the geological process of the deposit,four mineralization episodes were identified: melt/fluid coexisting period(O),skarn period(A),first sulfide period(B) and second sulfide period(C),and 10 stages were finally subdivided. Three types of inclusions were classified in seven stages,namely crystal bearing inclusions(type I),aqueous inclusions(type II) and pure liquid inclusions(type III). Type I and II inclusions were observed in stage O1,having homogenization temperature from 252 to 431°C,and salinities ranging from 24.3% to 48.0%. Type I inclusion was present in stage A1,having homogenization temperature from 506 to 548°C,and salinities ranging from 39.4% to 44.6%. In stage B1,type II and III inclusions were observed,with homogenization temperature concentrating between 300–400°C,and salinities from 0.4% to 4.3%. Type II inclusions were present in stage B2,with homogenization temperature varying from 403 to 550°C. In stage C1,type I and II inclusion commonly coexisted,and constituted a boiling inclusion group,having homogenization temperatures at 187–463°C,and salinities in a range of 29.4%–46.8% and 2.2%–11.0%. Type II and III inclusions were developed in stage C2,having homogenization temperature at 124–350°C,and salinities ranging between 1.6% and 15.4%. In stage C3,type II and III inclusions were presented,with a homogenization temperature range of 164–360°C,and salinities varying from 4.0% to 11.0%. The results of micro-thermal analysis show that fluids are characterized by high temperature and high salinity in stage O1 and A1,and experienced slight decrease in temperature and dramatic decrease in salinity in stage B1 and B2. In stage C1,the salinity of fluid increased greatly and a further decrease of temperature and salinity occurred in stage C2 and C3. Fluids boiled in stage C1. With calculated pressure of 22 MPa from the trapping temperature of 284–289°C,a mineralization depth of 2.2 km was inferred. Results of Laser Raman Spectroscopy show high density of H2 O,CH4 and CO2 were found as gas composition. H-O isotope study indicates the oreforming fluids were the mixture of magmatic water and meteoric water. Physicochemical parameters of fluids show oxygen and sulfur fugacity experienced a decrease,and redox state is weakly reducing. Along with fluid evolution,oxidation has increased slightly. Comprehensive analysis shows that melt exsolution occurred during the formation of quartz diorite and that metal elements existed and migrated in the form of chlorine complex. Immiscible fluid separation and boiling widely occurred after addition of new fluids,bringing about dissociation of chlorine-complex,resulting in a great deal of copper precipitation. In conclusion,Saishitang deposit,controlled by regional tectonics,is formed by metasomatism between highly fractionated mineralization rock body and wall rock,and belongs to banded skarn Cu-polymetallic deposit.  相似文献