This paper presents a constitutive model that predicts the water retention behaviour of compacted clays with evolving bimodal pore size distributions. In line with previous research, the model differentiates between the water present inside the saturated pores of the clay aggregates (the microstructure) and the water present inside the pores between clay aggregates (the macrostructure). A new formulation is then introduced to account for the effect of the macrostructural porosity changes on the retention behaviour of the soil, which results in a consistent evolution of the air-entry value of suction with volumetric deformations. Data from wetting tests on three different active clays (i.e. MX-80 bentonite, FEBEX bentonite, and Boom clay), subjected to distinct mechanical restraints, were used to formulate, calibrate, and validate the proposed model. Results from free swelling tests were also modelled by using both the proposed double porosity model and a published single porosity model, which confirmed the improvement in the predictions of degree of saturation by the present approach. The proposed retention model might be applied, for example, to the simulation of the hydromechanical behaviour of engineered bentonite barriers in underground nuclear waste repositories, where compacted active clays are subjected to changes of both suction and porosity structure under restrained volume conditions.
This paper presents a fundamental study on the effect of the relative humidity on the rockfill crushing strength. This aspect plays an important role in the mechanical behaviour of rockfill, and it is known that certain characteristics of the granular materials, such as compressibility and shear strength, depend on the confining stress, which is a function of the particles crushing. An increased interest has been observed regarding the effect of the relative humidity in the mechanical behaviour of rockfill. Unfortunately, limited research has been conducted until now regarding the study of individual particle crushing. Therefore, this paper thoroughly investigated particle crushing, by performing single-particle crushing tests on rockfill particles divided into four size ranges, under different relative humidity conditions. The experimental results reveal a considerable influence of the relative humidity in the studied rockfill particles, whose strength of the particles with the greatest dimensions in saturated conditions was reduced by half. Consistent macro-mechanical evidence demonstrates that particle’s size and relative humidity conditions depict the most important factors that influence particle crushing strength.
A two-dimensional horizontal finite element numerical model (RMA-2) was applied to a 24 km river channel-floodplain reach in West Germany. Initial results indicate that finite element schemes may successfully estimate inundation in large-scale floodplain applications. Potentially, the resulting detailed velocity vector distributions and identification of inundation zones throughout storm events could provide an insight into the present day sedimentary environment on the floodplain. 相似文献
Annual evaporation from groundflora, litter and soil of the jarrah forest was estimated from measurements of daily evaporation by ventilated chambers on several days over two separate 12-month periods. In the first year, when sampling ranged over 0.1 ha of forest, annual evaporation during daylight hours was estimated as 410 mm (0.32 rainfall). In the second year, sampling was more frequent, on a larger scale, and included the night hours. Annual evaporation was estimated at 360 mm (0.36 rainfall).
Similarly, in the second year, annual evaporation from two trees of the dominant middle storey species, Banksia grandis, was estimated at 7500 and 18,9001 respectively. The leaf area of these two trees was 9.6 and 22.4 m2, respectively, so that annual evaporation, when expressed as mm3 per mm2 leaf area, was similar for both trees (mean = 820 ± 30 mm). Applying that value to all Banksia trees in a hectare of forest, and using a measured estimate of leaf area index of 0.19, the estimated annual evaporation from the Banksia component was 155 mm (0.16 rainfall). For the upland part of the forest sampled, the combined annual evaporation from the lower and middle storeys accounted for about half (0.51) of the annual rainfall.
We conclude that reduced evaporation from the upper storey following clearing or thinning may be strongly counteracted by increased evaporation from the understorey due to increased availability of energy and water. 相似文献
The frequency and periodicity of preserved graded turbidite cycles in submarine fans in the Coral Sea and Sea of Japan are correlated to times of tectonic uplift in response to major collisions in the Owen-Stanley Range of Papua and the Hida Range of Japan, respectively. Large frequencies and shorter-term periodicities of turbidites at DSDP Site 210 were coeval with early Pliocene maximum tectonic-uplift rates which occurred in the Owen-Stanley Range in response to obduction. Similarly, large frequencies and shorter-term periodicities of turbidites at Site 299 (Toyama Submarine Fan) were coeval with the late Pleistocene uplift in the Hida Range; this uplift of 1000 to 1500 m occurred in response to collision tectonics. In both cases, trends of increasing frequencies and towards shorter-term periodicities of preserved turbidite depositional events correlate to trends of increasing rates of tectonic uplift.The role of sea-level fluctuations on changing denudation rates in these two collision zones is secondary. At Site 210, larger frequencies and short-term periodicities of preserved turbidites were coeval with early Pliocene high stands of sea level, whereas at Site 299, Pleistocene sea-level fluctuations are considered minor because at low stands of sea level, both relief and denudation rates were increased by about ten to 14%. At Site 286 (New Hebrides Basin), Eocene turbidite deposition is coeval with high stands of sea level, whereas at Site 297 (Northern Shikoku Basin), turbidite deposition was coeval with both rising and falling sea level.Analysis of both frequency and periodicity of turbidites by fan subenvironment at Site 299 indicates a record of continuous deposition, and maintainance of frequency and periodicity trends controlled by tectonic uplift. Late Pleistocene channel and overbank deposits showed periodicity differences of less than 28% of an order of magnitude, whereas Miocene-Pliocene overbank and distal turbidite periodicities differed by a 19% order of magnitude. Greater differences in magnitude occurred between distal turbidites or early Pleistocene age and Pliocene age than between Miocene-Pliocene overbank and distal turbidite deposition with a magnitude difference of 860%. These findings suggest that shifting depocenters and differences in sedimentation history in subenvironments of submarine fans are secondary to the role of tectonic uplift in this particular case.The minimal rate of tectonic uplift required to generate deep-sea fan turbidities appears to be approximately 400 m/million years. This figure is tentative and is based on very few observation points.Frequency and periodicity of preserved turbidite cycles in submarine fans in active continental margins and ancient counterparts should provide an independent measurement of rates and timing of tectonic uplift, particularly in collision terrains. Because this sediment parameter is a record of a single process from a single source and a record of “event stratigraphy”, its usage is preferable over standard and bulk sediment accumulation rates determined from age depth curves. 相似文献
Cosmic-ray-produced26Al (t1/2 = 7.05 × 105 years) has been measured in the Apollo 15 long core (surface to 390 g/cm2—218 cm) for study of galactic cosmic ray production profiles, using accelerator mass spectrometry. The results are in general accord with non-destructive counting data obtained earlier, but systematically lower, and significantly higher precision. From this experiment the half-attenuation length for26Al production can be calculated to be 122 g/cm2 (150–400 g/cm2 region) after normalizing the data to average chemical composition. The53Mn (t1/2 = 3.7 × 106 years) production profile in deep cores was also compiled to date. The half-attenuation length for53Mn production was calculated to be 123 g/cm2 (150–400 g/cm2 region). 相似文献
