Allozyme genotypes and tolerance to copper stress in Hediste diversicolor (Polychaeta: Nereididae)     

Virgilio M  Abbiati M 《Marine pollution bulletin》2004,49(11-12):978-985

This study analysed the occurrence of genotypic shifts in laboratory populations of Hediste diversicolor (Polychaeta: Nereididae) exposed to copper stress. Specimens of H. diversicolor were collected at three sites, up to 10 km apart, in the estuarine area of the Pialassa lagoons (North Adriatic Sea, Italy) and were used in acute toxicity tests. Specimens were assigned to copper exposure (0.34 mg/l Cu2+) or control conditions. Each combination of Treatment and Site was replicated in two tanks containing 35 specimens of H. diversicolor. The genotypic structure of both dead and survived specimens was analysed by allozyme electrophoresis at six loci (ALD, FH, HBDH LDH, PGI, SDH). Under copper exposure, specimens with the genotypes ALD100/100 and PGI102/102 had significantly lower mortalities than other genotypes Results were consistent across the three sites, suggesting that, under laboratory conditions, effects of copper stress on H. diversicolor is related to individual genotypes at ALD and PGI loci.  相似文献   

Volcanic geomorphology and tectonics of the Aeolian archipelago (Southern Italy) based on integrated DEM data   总被引：1，自引：0，他引：1  

Massimiliano FavalliM  Dávid Karátson  Roberto Mazzuoli  Maria Teresa Pareschi  Guido Ventura 《Bulletin of Volcanology》2005,68(2):157-170

The geomorphological and morphometric analysis of the sea floor topography surrounding the Aeolian Islands, South Tyrrhenian Sea, Italy, provides insights into the relationships between the volcanological evolution of the islands and their tectonic features. We constructed geomorphological maps of the submarine portions of the seven large edifices constituting the islands on the basis of a DEM with a 5 m resolution step. These maps include constructional and destructional landforms such as submarine volcanic vents located west of Lipari and north of Alicudi, and hummocky surfaces recognised north of Lipari and Salina. The latter landforms, together with the occurrence of large scars affecting the main edifices on land, suggest that sector collapses affected some islands. Geomorphological data indicate that the location of subaerial and submarine vents is strongly controlled by local tectonic structures striking WNW-ESE (Alicudi-Filicudi sector), NNW-SSE (Salina-Lipari-Vulcano sector) and NE-SW (Panarea-Stromboli sector). The islands can be divided into two groups on the basis of some morphometric parameters: a first group with a pancake-like shape, Dp/D (abrasion platform diameter/basal diameter) higher than 0.40 and H/D (total height/basal diameter) lower than 0.13, and a second group with a conical shape, characterised by Dp/D lower than 0.34 and H/D higher than 0.14. These ratios and other morphometric parameters reflect the different volcanological and structural evolution of the Aeolian Islands. The pancake-like shaped complexes have been created, in addition to their submarine stage, by extrusive and highly explosive activity, whereas the cone-shaped edifices have been characterised by effusive or moderate explosive activity.Editorial responsibility: C Kilburn  相似文献   

Thermodynamics of aluminosilicate garnet solid solution: new experimental data,an optimized model,and thermometric applications   总被引：10，自引：1，他引：10  

J. Ganguly  Weiji Cheng  Massimiliano Tirone 《Contributions to Mineralogy and Petrology》1996,126(1-2):137-151

 We have experimentally determined the displacement of the equilibrium Grossular + 2 Kyanite + Quartz ⇆ 3 Anorthite (GASP) as a function of garnet composition in the systems Mg-Ca-Mn, Fe-Mg-Ca and Fe-Mg-Ca-Mn at 1000°C. The results were treated along with selected experimental and observational data available in the literature as well as binary parameters from other workers to obtain a set of mutually compatible binary mixing parameters of the quaternary (Fe,Mg,Ca,Mn)- aluminosilicate garnet solid solution. Attempts to determine equilibrium garnet composition in the GASP equilibrium in the Ca-Mg binary were unsuccessful due to the formation of pyroxene. Calculations of binary and ternary miscibility gaps show that the P,T,X combination required for unmixing of garnet solid solution is not realized by natural samples. The solution model was applied to account for compositional effects on Fe-Mg exchange between garnet and ortho- or clino-pyroxene. Applications of the revised thermometric formulations to selected natural assemblages yield P-T conditions which are much less sensitive to compositional effects compared to the other available formulations, and are consistent with independent constraints. Received: 21 April 1995 / Accepted: 17 May 1996  相似文献   

Long-Term Stability Analysis of Quasi Integrable Degenerate Systems Through the Spectral Formulation of the Nekhoroshev Theorem     

Massimiliano Guzzo 《Celestial Mechanics and Dynamical Astronomy》2002,83(1-4):303-323

We describe a numerical application of the Nekhoroshev theorem to investigate the long-term stability of quasi-integrable systems. We extend the results of a previous paper to a class of degenerate systems, which are typical in celestial mechanics.  相似文献   

Process‐based hydrological modelling: The potential of a bottom‐up approach for runoff predictions in ungauged catchments          下载免费PDF全文

Manuel Antonetti  Simon Scherrer  Peter Matthias Kienzler  Michael Margreth  Massimiliano Zappa 《水文研究》2017,31(16):2902-2920

Conceptual rainfall–runoff models are a valuable tool for predictions in ungauged catchments. However, most of them rely on calibration to determine parameter values. Improving the representation of runoff processes in models is an attractive alternative to calibration. Such an approach requires a straightforward, a priori parameter allocation procedure applicable on a wide range of spatial scales. However, such a procedure has not been developed yet. In this paper, we introduce a process‐based runoff generation module (RGM‐PRO) as a spin‐off of the traditional runoff generation module of the PREVAH hydrological modelling system. RGM‐PRO is able to exploit information from maps of runoff types, which are developed on the basis of field investigations and expert knowledge. It is grid based, and within each grid cell, the process heterogeneity is considered to avoid information loss due to grid resolution. The new module is event based, and initial conditions are assimilated and downscaled from continuous simulations of PREVAH, which are also available for real‐time applications. Four parameter allocation strategies were developed, on the basis of the results of sprinkling experiments on 60‐m² hillslope plots at several grassland locations in Switzerland, and were tested on five catchments on the Swiss Plateau and Prealps. For the same catchments, simulation results obtained with the best parameter allocation strategy were compared with those obtained with different configurations of the traditional runoff generation module of PREVAH, which was also applied as an event‐based module here. These configurations include a version that avoids calibration, one that transfers calibrated parameters, and one that uses regionalised parameter values. RGM‐PRO simulated heavy events in a more realistic way than the uncalibrated traditional runoff generation module of PREVAH, and, in some instances, it even exceeded the performance of the calibrated traditional one. The use of information on the spatial distribution of runoff types additionally proved to be valuable as a regionalisation technique and showed advantages over the other regionalisation approaches, also in terms of robustness and transferability.  相似文献   

Potential evidence for slab detachment from the flexural backstripping of a foredeep: Insight on the evolution of the Pescara basin (Italy)          下载免费PDF全文

Paolo Mancinelli  Cristina Pauselli  Giorgio Minelli  Massimiliano R. Barchi  Guy Simpson 《地学学报》2018,30(3):222-232

The discrepancy between the size of the Apenninic chain and the depth of the Adriatic foredeep is investigated using 2D flexural backstripping on well‐constrained depth‐converted cross‐sections in the Pescara basin (Central Italy). The procedure consisted of removal, uplift, unfolding and unfaulting of the Pliocene–Pleistocene foreland deposits to produce a palaeogeographic map of the basin at the end of the Messinian and to constrain sedimentary rates since the Miocene. Results are found to support the contribution of an external load to the foreland evolution together with the Apenninic chain load. The interplay of the two types of loads resulted in spatial and temporal variations of the foredeep evolution that are quantified by palaeogeographic maps and sedimentation rates obtained through backstripping. Results are interpreted as representing the effects of a southward‐migrating wave linked to slab detachment beneath the Adriatic foredeep. This procedure can be useful to investigate similar problems on other chains worldwide.  相似文献   

Columnar jointing in vapor-phase-altered,non-welded Cerro Galán Ignimbrite,Paycuqui, Argentina     

Heather M. N. Wright  Chiara Lesti  Raymond A. F. Cas  Massimiliano Porreca  José G. Viramonte  Chris B. Folkes  Guido Giordano 《Bulletin of Volcanology》2011,73(10):1567-1582

Columnar jointing is thought to occur primarily in lavas and welded pyroclastic flow deposits. However, the non-welded Cerro Galán Ignimbrite at Paycuqui, Argentina, contains well-developed columnar joints that are instead due to high-temperature vapor-phase alteration of the deposit, where devitrification and vapor-phase crystallization have increased the density and cohesion of the upper half of the section. Thermal remanent magnetization analyses of entrained lithic clasts indicate high emplacement temperatures, above 630°C, but the lack of welding textures indicates temperatures below the glass transition temperature. In order to remain below the glass transition at 630°C, the minimum cooling rate prior to deposition was 3.0 × 10⁻³–8.5 × 10⁻²°C/min (depending on the experimental data used for comparison). Alternatively, if the deposit was emplaced above the glass transition temperature, conductive cooling alone was insufficient to prevent welding. Crack patterns (average, 4.5 sides to each polygon) and column diameters (average, 75 cm) are consistent with relatively rapid cooling, where advective heat loss due to vapor fluxing increases cooling over simple conductive heat transfer. The presence of regularly spaced, complex radiating joint patterns is consistent with fumarolic gas rise, where volatiles originated in the valley-confined drainage system below. Joint spacing is a proxy for cooling rates and is controlled by depositional thickness/valley width. We suggest that the formation of joints in high-temperature, non-welded deposits is aided by the presence of underlying external water, where vapor transfer causes crystallization in pore spaces, densifies the deposit, and helps prevent welding.  相似文献   

Climate change effects on snow melt and discharge of a partly glacierized watershed in Central Switzerland (SoilTrec Critical Zone Observatory)     

Florian Kobierska  Tobias Jonas  Jan Magnusson  Massimiliano Zappa  Mathias Bavay  Thomas Bosshard  Frank Paul  Stefano M. Bernasconi 《Applied Geochemistry》2011

A comprehensive hydrological modeling study in the drainage area of a hydropower reservoir in central Switzerland is presented. Two models were tested to reproduce the measured discharge dynamics: (1) a detailed energy-balance model (ALPINE3D) primarily designed for snow simulations; (2) a conceptual runoff model system (PREVAH), including a distributed temperature-index snow and ice melt model. Considerable effort was put into distributing available meteorological station data to the model grids as forcing data. The recent EU regional climate modeling initiative ENSEMBLES provided up-to-date climate predictions for two 30-a periods in mid and late 21st century. These were used to estimate evolutions in the water supply of the hydropower reservoir in response to expected climate changes. The simulations suggest a shift of spring peak-flow by almost two months for the end of the century. Warmer winter temperatures will cause higher winter base-flow. Due to glacier retreat, late-summer flow will decrease at the end of the century.  相似文献   

Direct,partitioned and projected solution to finite element consolidation models     

Giuseppe Gambolati  Giorgio Pini  Massimiliano Ferronato 《国际地质力学数值与分析法杂志》2002,26(14):1371-1383

Direct, partitioned, and projected (conjugate gradient‐like) solution approaches are compared on unsymmetric indefinite systems arising from the finite element integration of coupled consolidation equations. The direct method is used in its most recent and computationally efficient implementations of the Harwell Software Library. The partitioned approach designed for coupled problems is especially attractive as it addresses two separate positive definite problems of a smaller size that can be solved by symmetric conjugate gradients. However, it may stagnate and when converging it does not prove competitive with a global projection method such as Bi‐CGSTAB, which may take full advantage of its flexibility in working on scaled and reordered equations, and thus may greatly improve its computational performance in terms of both robustness and convergence rate. The Bi‐CGSTAB superiority to the other approaches is discussed and demonstrated with a few representative examples in two‐dimensional (2‐D) and three‐dimensional (3‐D) coupled consolidation problems. Copyright © 2002 John Wiley & Sons, Ltd.  相似文献   

Planform architecture,stratigraphic signature and morphodynamics of an exhumed Jurassic meander plain (Scalby Formation,Yorkshire, UK)     

Alessandro Ielpi  Massimiliano Ghinassi 《Sedimentology》2014,61(7):1923-1960

Modern fluvial meander plains exhibit complex planform transformations in response to meander‐bend expansion, downstream migration and rotation. These transformations exert a fundamental control on lithology and reservoir properties, yet their stratigraphic record has been poorly evaluated in ancient examples due to the lack of extensive three‐dimensional exposures. Here, a unique exhumed meander plain exposed to the north of Scarborough (Yorkshire, UK) is analysed in terms of architecture and morphodynamics, with the aim of developing a comprehensive model of facies distribution. The studied outcrop comprises tidal platforms and adjacent cliffs, where the depositional architecture of un‐tilted deposits was assessed on planform and vertical sections, respectively. In its broader perspective, this study demonstrates the potential of architectural mapping of extensive planform exposures for the reconstruction of ancient fluvial morphodynamics. The studied exhumed meander plain is part of the Scalby Formation of the Ravenscar Group, and originally drained small coastal incised valleys within the Jurassic Cleveland Basin. The meander plain is subdivided into two storeys that contain in‐channel and overbank architectural elements. In‐channel elements comprise expansional and downstream‐migrating point bars, point‐bar tails and channel fills. Overbank elements comprise crevasse complexes, levées, floodplain fines and lake fills. The evolution of the point bars played a significant role in dictating preserved facies distributions, with high flood‐stage nucleation and accretion of meander scrolls later reworked during waning flood‐stages. At a larger scale, meander belt morphodynamics were also a function of valley confinement and contrasts in substrate erodibility. Progressive valley infilling decreased the valley confinement, promoting the upward transition from prevalently downstream migrating to expansional meander belts, a transition associated with enhanced preservation of overbank elements. Strikingly similar relations between valley confinement, meander‐bend transformations and overbank preservation are observed in small modern meandering streams such as the Beaver River of the Canadian prairies and the Powder River of Montana (USA).  相似文献