Treatment of Malting Wastewater in a Granular Sludge Sequencing Batch Reactor (SBR)     

Norbert Schwarzenbeck  Ron Erley  Belinda S. Mc Swain  Peter A. Wilderer  Robert L. Irvine 《洁净——土壤、空气、水》2004,32(1):16-24

Aerobic granular sludge was successfully cultivated in a sequencing batch reactor (SBR) treating wastewater from the malting process with a high content of particulate organic matter. At an organic loading rate of 3.2 kg/(m³ d) COD_total and an influent particle concentration of 0.95 g/L MLSS an average removal of 50% in COD_total and 80% in COD_dissolved could be achieved. A comparison of granular and flocculent sludge grown under the same operating conditions showed no significant difference in removal efficiency although granules exhibited a higher metabolic activity in terms of specific oxygen uptake rate (r_{O2, X}). Two distinct mechanisms of particle removal were observed for granular sludge: during initial granule formation, particles were incorporated into the biofilm matrix. For mature granules, a high level of protozoa growth on the granule surface accounted for the ability to remove particulate COD. Combined evaluation of the development in MLSS content and sludge bed settling rate (i.e., mean derivative of the normalized sludge volume) was found to be an adequate method for monitoring the characteristic settling properties of a granulizing sludge bed. By means of this method, a distinct substrate gradient out of several operating conditions was concluded to have the biggest impact on the formation of aerobic granular sludge.  相似文献   

Post-Muckpile, Pre-Primary Crusher, Automated Optical Blast Fragmentation Sizing     

Norbert H. Maerz  Tom W. Palangio 《Fragblast: International Journal for Blasting and Fragmentation》2004,8(2):119-136

  相似文献   

An automated salt‐tracing gauge for flow‐velocity measurement     

Olivier Planchon  Norbert Silvera  Raphael Gimenez  David Favis‐Mortlock  John Wainwright  Yves Le Bissonnais  Gerard Govers 《地球表面变化过程与地形》2005,30(7):833-844

This article introduces the SVG (salt‐velocity gauge), a novel automated technique for measuring flow velocity by means of salt tracing. SVG allows a high measuring rate (up to one every 2 seconds), short control section length (down to 10 cm), high accuracy (+[sol ]?1·5 cm s^?1), and unbiased calculation of the mean velocity in experimental conditions with turbulent, supercritical flow. A few cubic centimetres of saturated salt solution (NaCl) are injected into the flow at regular time intervals using a programmable solenoid valve. The tracer successively passes two conductivity probes placed a short distance downstream. The transformation of the signal between the two probes is modelled as a one‐dimensional diffusion wave equation. Model calibration gives an estimation of the mean velocity and the diffusion for each salt plume. Two implementations of the SVG technique are described. The first was an outdoors simulated rainfall experiment in Senegal (conductivity probes at 40 cm apart, 8 Hz measurement rate, salt injections at 10 second intervals). Mean velocity was estimated to range between 0·1 and 0·3 m s^?1. The second was a laboratory‐based flume experiment (conductivity probes at 10 cm apart, 32 Hz, salt injections at 2 second intervals). Another SVG with probes at 34 cm apart was used for comparison. An acoustic Doppler velocimeter (ADV) was also used to give an independent assessment of velocity. Using the 10 cm salt gauge, estimated mean velocity ranged from 0·6 to 0·9 m s^?1 with a standard deviation of 1·5 cm s^?1. Comparisons between ADV, 10 cm SVG and 34 cm SVG were consistent and demonstrated that the salt‐tracing results were unbiased and independent of distance between probes. Most peaks were modelled with r² > 90 per cent. The SVG technology offers an alternative to the dye‐tracing technique, which has been severely criticized in the literature because of the wide interval of recommended values for the correction factor α to be applied to the timings. This article demonstrates that a fixed value of α is inappropriate, since the correction factor varies with velocity, diffusion and the length of the control section. Copyright © 2005 John Wiley & Sons, Ltd.  相似文献   

A statistical procedure for the analysis of seismotectonically induced hydrochemical signals: A case study from the Eastern Carpathians, Romania   总被引：3，自引：0，他引：3  

Jens Hartmann  Zsolt Berner  Doris Stüben  Norbert Henze   《Tectonophysics》2005,405(1-4):77-98

Changes in the stress field of an aquifer system induced by seismotectonic activity may change the mixing ratio of groundwaters with different compositions in a well, leading to hydrochemical signals which in principle could be related to discrete earthquake events. Due to the complexity of the interactions and the multitude of involved factors the identification of such relationships is a difficult task. In this study we present an empiric statistical approach suitable to analyse if there is an interdependency between changes in the chemical composition of monitoring wells and the regional seismotectonic activity of a considered area. To allow a rigorous comparison with hydrochemistry the regional earthquake time series was aggregated into an univariate time series. This was realized by expressing each earthquake in form of a parameter “e”, taking into consideration both energetic (magnitude of a seismic event) and spatial parameters (position of epi/hypocentrum relative to the monitoring site). The earthquake and the hydrochemical time-series were synchronised aggregating the e-parameters into “earthquake activity” functions E, which takes into account the time of sampling relative to the earthquakes which occurred in the considered area. For the definition of the aggregation functions a variety of different “e” parameters were considered. The set of earthquake functions E was grouped by means of factor analysis to select a limited number of significant and representative earthquake functions E to be used further on in the relation analysis with the multivariate hydrochemical data set. From the hydrochemical data a restricted number of hydrochemical factors were extracted. Factor scores allow to represent and analyse the variation of the hydrochemical factors as a function of time. Finally, regression analysis was used to detect those hydrochemical factors which significantly correlate with the aggregated earthquake functions.This methodological approach was tested with a hydrochemical data set collected from a deep well monitored for two years in the seismically active Vrancea region, Romania. Three of the hydrochemical factors were found to correlate significantly with the considered earthquake activities. A screening with different time combinations revealed that correlations are strongest when the cumulative seismicity over several weeks was considered. The case study also showed that the character of the interdependency depends sometimes on the geometrical distribution of the earthquake foci. By using aggregated earthquake information it was possible to detect interrelationships which couldn't have been identified by analysing only relations between single geochemical signals and single earthquake events. Further on, the approach allows to determine the influence of different seismotectonic patterns on the hydrochemical composition of the sampled well. The method is suitable to be used as a decision instrument in assessing if a monitoring site is suitable or not to be included in a monitoring net within a complex earthquake prediction strategy.  相似文献   

Modeling of in-situ crystallization processes in the Permian mafic layered intrusion of Mont Collon (Dent Blanche nappe, western Alps)     

Philippe Monjoie  Fran  ois Bussy  Henriette Lapierre  Hans-Rudolf Pfeifer 《Lithos》2005,83(3-4):317-346

The Mont Collon mafic complex is one of the best preserved examples of the Early Permian magmatism in the Central Alps, related to the intra-continental collapse of the Variscan belt. It mostly consists (> 95 vol.%) of ol + hy-normative plagioclase-wehrlites, olivine- and cpx-gabbros with cumulitic structures, crosscut by acid dikes. Pegmatitic gabbros, troctolites and anorthosites outcrop locally. A well-preserved cumulative sequence is exposed in the Dents de Bertol area (center of intrusion). P–T calculations indicate that this layered magma chamber emplaced at mid-crustal levels at about 0.5 GPa and 1100 °C. The Mont Collon cumulitic rocks record little magmatic differentiation, as illustrated by the restricted range of clinopyroxene mg-number (Mg#_cpx = 83–89). Whole-rock incompatible trace-element contents (e.g. Nb, Zr, Ba) vary largely and without correlation with major-element composition. These features are characteristic of an in-situ crystallization process with variable amounts of interstitial liquid L trapped between the cumulus mineral phases. LA-ICPMS measurements show that trace-element distribution in the latter is homogeneous, pointing to subsolidus re-equilibration between crystals and interstitial melts. A quantitative modeling based on Langmuir's in-situ crystallization equation successfully duplicated the REE concentrations in cumulitic minerals of all rock facies of the intrusion. The calculated amounts of interstitial liquid L vary between 0 and 35% for degrees of differentiation F of 0 to 20%, relative to the least evolved facies of the intrusion. L values are well correlated with the modal proportions of interstitial amphibole and whole-rock incompatible trace-element concentrations (e.g. Zr, Nb) of the tested samples. However, the in-situ crystallization model reaches its limitations with rock containing high modal content of REE-bearing minerals (i.e. zircon), such as pegmatitic gabbros. Dikes of anorthositic composition, locally crosscutting the layered lithologies, evidence that the Mont Collon rocks evolved in open system with mixing of intercumulus liquids of different origins and possibly contrasting compositions. The proposed model is not able to resolve these complex open systems, but migrating liquids could be partly responsible for the observed dispersion of points in some correlation diagrams. Absence of significant differentiation with recurrent lithologies in the cumulitic pile of Dents de Bertol points to an efficiently convective magma chamber, with possible periodic replenishment.  相似文献   

Holocene survival of the wild horse in Europe: a matter of open landscape?     

Robert S. Sommer  Norbert Benecke  Lembi Lõugas  Oliver Nelle  Ulrich Schmölcke 《第四纪科学杂志》2011,26(8):805-812

The wild horse Equus ferus was one of the most frequent species of the Late Pleistocene large ungulate fauna in Eurasia and played an important role in the subsistence of human groups, especially at the end the Late Glacial. It is frequently assumed that E. ferus became extinct in Europe at the beginning of the Holocene because of the development of woodlands and loss of open habitats. Because of its preference for open habitats and in spite of its adaptability, the appearance or disappearance of the wild horse could therefore be a suitable palaeoecological indicator for the opening of the Holocene primeval woodlands. We revised the dating and reliability of the subfossil record and dated several bones by atomic mass spectrometry ¹⁴C dating. From the beginning of the Holocene (9600 cal a BC) to the end of the Atlantic Period (3750 cal a BC) there are 207 archaeological sites with wild horse records available in Europe. E. ferus survived the Pleistocene Holocene transition in Europe, but the spatiotemporal dynamics of populations fluctuated remarkably in the early and middle Holocene. Small and sparse populations increasingly became extinct during the early Holocene, until between 7100 and 5500 cal a BC the wild horse was almost absent in central parts of the European Lowlands. Particular conditions in natural open patches in the canopy forests, chalklands and floodplains may have maintained the local survival of the horse in some regions of the Lowlands, however. In the Late Atlantic, between 5500 and 3750 cal a BC the range of the wild horse was again extended. It re‐immigrated into central and western Europe, probably as a consequence of increasing landscape opening by Neolithic peoples. The data presented here may be a valuable part of the debate on the degree of openness of the early and middle Holocene landscape. Copyright © 2011 John Wiley & Sons, Ltd.  相似文献   

Spatially controlled Fe and Si isotope variations: an alternative view on the formation of the Torres del Paine pluton     

Norbert?A.?GajosEmail author  Craig?C.?Lundstrom  Alexander?H.?Taylor 《Contributions to Mineralogy and Petrology》2016,171(11):93

We present new Fe and Si isotope ratio data for the Torres del Paine igneous complex in southern Chile. The multi-composition pluton consists of an approximately 1 km vertical exposure of homogenous granite overlying a contemporaneous 250-m-thick mafic gabbro suite. This first-of-its-kind spatially dependent Fe and Si isotope investigation of a convergent margin-related pluton aims to understand the nature of granite and silicic igneous rock formation. Results collected by MC-ICP-MS show a trend of increasing δ⁵⁶Fe and δ³⁰Si with increasing silica content as well as a systematic increase in δ⁵⁶Fe away from the mafic base of the pluton. The marginal Torres del Paine granites have heavier Fe isotope signatures (δ⁵⁶Fe = +0.25 ± 0.02 2se) compared to granites found in the interior pluton (δ⁵⁶Fe = +0.17 ± 0.02 2se). Cerro Toro country rock values are isotopically light in both Fe and Si isotopic systems (δ⁵⁶Fe = +0.05 ± 0.02 ‰; δ³⁰Si = ?0.38 ± 0.07 ‰). The variations in the Fe and Si isotopic data cannot be accounted for by local assimilation of the wall rocks, in situ fractional crystallization, late-stage fluid exsolution or some combination of these processes. Instead, we conclude that thermal diffusion or source magma variation is the most likely process producing Fe isotope ratio variations in the Torres del Paine pluton.  相似文献   

Spontaneous self-combustion of organic-rich lateglacial lake sediments after freeze-drying     

Nadine Dräger  Achim Brauer  Brian Brademann  Rik Tjallingii  Michał Słowiński  Mirosław Błaszkiewicz  Norbert Schlaak 《Journal of Paleolimnology》2016,55(2):185-194

  相似文献   

An evaluation of soil–plant–water interactions based on the <Superscript>87</Superscript>Sr/<Superscript>86</Superscript>Sr, 1/Sr,Ca/Sr,K/Rb and K/Ca ratios of the respective components     

Norbert Clauer  Khadija Semhi 《Environmental Earth Sciences》2016,75(8):690

  相似文献   

A New Generation Earth Mantle Model from Global Adjoint Tomography     

Youyi Ruan  Wenjie Lei  Matthieu Lefebvre  Ryan Modrak  James Smith  Ridvan Orsvuran  Ebru Bozdag  Judith Hill  Norbert Podhorszki  Dave Pugmire  Jeroen Tromp 《《地质学报》英文版》2018,92(Z1):140-140

  相似文献