Characteristics of groundwater flow field after land creation engineering in the hilly and gully area of the Loess Plateau   总被引：1，自引：0，他引：1  

Xiaoxi Yin  Luwang Chen  Jiandong He  Xiaoqing Feng  Wen Zeng 《Arabian Journal of Geosciences》2016,9(14):646

In order to study the degree of influence and control mechanism to groundwater flow field caused by land creation engineering in the hilly and gully area of the Loess Plateau, based on the geological and engineering conditions of the first stage project of Yan’an new district in China, numerical simulation of groundwater flow is carried out by the Feflow and GIS technologies. From the simulation, punning measure relatively reduces infiltration recharge and artificial gravel drain increases groundwater seepage. The basic characteristics of groundwater flow field is controlled by the old and new topographies in the whole study area, and artificial gravel drain plays an auxiliary role in accelerating groundwater drawdown upstream and promotes groundwater rise downstream. According to differences of groundwater level and declining percentages of hydraulic gradient in the main and secondary gullies, dewatering of artificial gravel drain in the secondary gully is more effective than that in the main gully, which will yet play an important role in the future. The study results will make contributions to understand groundwater response to land creation engineering and will be beneficial to take necessary measures to prevent collapse of loess and failure of building foundation in the hilly and gully area of the Loess Plateau.  相似文献   

Structural setup of Ras Banas area,Red Sea,Egypt, as inferred from aeromagnetic data     

Saada Ahmed Saada  Ahmed Abdelhay Azab 《Arabian Journal of Geosciences》2016,9(15):657

This study deals with the evaluation of the structural setup of the Ras Banas area on the northwestern part of the Red Sea by using magnetic data. Different analyzing techniques were applied to achieve this goal including regional-residual separation, trend analysis, depth estimation, Euler deconvolution, horizontal gradient, analytic signal, and magnetic modeling. The results of these techniques were used to construct a deep-seated structural feature map.Lineament analysis indicates that the area was mainly affected by the NW, WNW, and NE tectonic trends. The magnetic modeling was performed along four profiles supported by Euler deconvolution, horizontal gradient, and analytic signal profiles. The modeled profiles show that the basement rocks composed of uplifted and down-faulted blocks at different depths as well as step-like structure. The basement rocks seem to be acidic in nature intruded by basic/ultrabasic dikes. Generally, the magnetic susceptibility ranges from 0.0003 to 0.04 cgs indicating acidic to basic/ultrabasic rock composition. The basement relief map shows an irregular basement surface, which varies greatly in depth from 1 to 5.6 km below sea level. The deep-seated structure map shows that the basement was highly affected by two main fault trends in the NW and NNE directions. The NW trending structures were intersected by younger left lateral NNE transform faults. These cross-faults dissect the area into a number of alternated and elongated blocks.  相似文献   

Relationships among volcanic and hydrothermal activity and faults from the Shunnan 3-D well zone in the Tadong Area (Tarim Basin,China)     

Li KunBai  Lv HaiTao  Pu RenHai  Cao ZiCheng 《Arabian Journal of Geosciences》2016,9(17):692

Tarim Basin distributed widely two stages of Permian volcanic rocks. However, the location and timing of these rocks pinching out and the relationship between Ordovician carbonate hydrothermal reservoirs and fault activity remain unclear. The Shunnan (Shunnan here in after referred to as SN) 1 3-D well zone in the eastern Tarim Basin contains volcanic rocks, and the Ordovician layer contains a hydrothermal reservoir. This paper describes the lithology, stage, volcanic rock distribution, crater position and deposition pinch-out line of volcanic rocks based on drilling and 3-D seismic data. The Permian strata in the well zone contain only one stage of Kupkuciman Formation basalt and tuff, the Kaipeleicike Formation contains terrigenous clastic rock and the adjacent volcanic rocks of wells SN2 and GL (Gulong here in after referred to as GL) 2 exhibit an absence of deposition. Although the craters are distributed on both sides of the NNW faults that cross well SN4, their positions are also controlled by the intersection of earlier NEE and NW faults and later NNE faults. Furthermore, the Ordovician strata in the SN1 well zone developed abundant tubular high-amplitude anomalies and tabular high-amplitude anomalies via hydrothermal corrosion, and the anomaly distributions are similar to the positions of the craters, which are controlled by the intersection of multi-group faults and the density of the faults.  相似文献   

Impact of spate irrigation of flood waters on agricultural drought and groundwater recharge: case of Sidi Bouzid plain,Central Tunisia     

Hamdi Monji  Louati Dhouha  Majdoub Rajouene  Abida Habib 《Arabian Journal of Geosciences》2016,9(15):653

In Sidi Bouzid plain, rainfall alone is insufficient to satisfy crop water requirements. Within this framework, and in order to improve water resources in the region, the Tunisian State adopted non-conventional water mobilization techniques, among which artificial spate irrigation. The objective of the study is to evaluate the impact of spate irrigation of flood water on the mitigation of agricultural drought and the enhancement of groundwater recharge. Annual and monthly rainfall data as well as flood water volumes were monitored. The study focused on the groundwater drawdown monitoring. Results showed a high flood water contribution to crop water requirements that exceeded rainfall. This water prevented drought in the spate perimeters. The groundwater drawdown was found to fluctuate over time, with an average decreasing rate of 0.4 to 0.5 m/year. Groundwater recharge was found to be highly correlated with flood water contribution through spate irrigation (R ² = 84 %). Out of the spate zone, a high decrease in the groundwater level was noted. The lowest rate of 1 m/year was that of the farthest piezometer from the spate perimeters. This is influenced by the excessive pumping out of the spate zone. In 1980, groundwater flew from the west to the east. In 2015, the flow movement from the east to the center of the plain did not change due to the presence of the spate perimeters. Nevertheless, excessive pumping around sabkhas changed the flow directions at the outlet zone. A variation in groundwater salinity was observed in both space and time. In 1975, salinity was very low. The outlet zone was the most affected where the drawdown reached several meters, causing saltwater intrusion from the surrounding sabkhas.  相似文献   

Stromatolites: a guideline for development of a carbonate ramp,Basantpur Formation,Neoproterozoic Simla Group in Lesser Himalaya,India     

Ananya Mukhopadhyay  Tithi Banerjee 《Arabian Journal of Geosciences》2016,9(8):521

Outcrop-based facies analysis of the Proterozoic Basantpur Formation, Simla Group in the Lesser Himalaya was combined with the stromatolites morphometry and sea-level fluctuation to delineate the stages of carbonate ramp development. On this basis, a vertical profile depositional model (Basantpur type) has been developed. Facies associations and variation in the patterns of microbial growth along with the sea-level fluctuations have contributed to the identification of the development of a tide-influenced carbonate ramp. Different stromatolitic structures (mega-, macro- and microstructures) are documented in the dolomudstones and dolosiltstones along with fenestral structures and their depositional facies together with evidences of marine transgression which leads to development of carbonate ramp where inner-mid-outer-ramp subenvironments are recognised. The “Basantpur”-type model is therefore unique in that it deals with lateral facies variation due to shift in shore line along with fluctuations in accommodation space on a carbonate ramp owing to fluctuations of sea level. This model will probably find its applicability in similar carbonate ramps.  相似文献   

Three-dimensional supervirtual seismic refraction interferometry     

Paul Edigbue  Abdullatif Al-Shuhail 《Arabian Journal of Geosciences》2016,9(8):537

Improved supervirtual interferometry (SVI) method that enhance the signal-to-noise ratio (SNR) of noisy seismic refraction data is presented. This 3D supervirtual algorithm is helpful in removal of side lobes caused by convolution in the conventional 3D SVI method. In this study, we extend the supervirtual seismic refraction interferometry method to 3D geometries commonly used in active seismic exploration. To achieve this objective, synthetic 3D seismic refraction data were created using single patch orthogonal geometry. Simple two-layers velocity model was used. A zero phase wavelet was convolved with the refraction travel time to create the seismic wiggle trace. The refraction arrival is computed using the equation for horizontal refractor case and is not adapted for dipping refractor. Noise of Gaussian distribution with zero mean and 0.25 standard deviation was added to simulate a case of moderate ambient noise. The supervirtual algorithm, consisting of crosscorrelation, alignment, summation, and first arrival calculation is performed. By aligning and summation of all the correlogram, the stationary position of source-receiver pairs as required in the 2D supervirtual method are eliminated in this case. Synthetic data presented in this study shows accurate first arrivals after the application of the 3D SVI and traces with much better SNR than the actual traces.  相似文献   

Performance of seismic arrays in the presence of weathering layer variations     

Jubran Akram  Abdullatif A. Al-Shuhail 《Arabian Journal of Geosciences》2016,9(8):522

Near-surface layer variations can degrade the desired response of seismic arrays which are typically used to attenuate horizontally traveling coherent noise and enhance vertically traveling signal. We investigate the effect of variations in the near-surface layer thickness on the performance of arrays by studying their impulse and wavelet responses. The models considered include the topographic variations and a channel in the base of weathering layer. The topographic variations include a dipping surface layer as well as a surface layer that follows a sine wave. The geological channel is assumed to be present under the entire receiver array as well as partially under a few receivers. We use Ricker wavelet and model plane wavefronts with incidence angles (90, 70, 45, 20, and 5 °) on a 12-element equally weighted array for the weathering layer models. We found that the array responses are more degraded for near-vertically traveling waves in all cases. The array responses are also found to be more degraded when channel variations are present underneath a few receivers as compared to the entire array length. We recommend designing a spatial filter or using single-sensor records after correcting for intra-array statics to preserve the reflection amplitudes in the presence of weathering layer variations.  相似文献   

Effects of size and strain rate on the mechanical behaviors of rock specimens under uniaxial compression     

Qingbin Meng  Mingwei Zhang  Lijun Han  Hai Pu  Hao Li 《Arabian Journal of Geosciences》2016,9(8):527

Size and strain rate are two key factors that dramatically influence the estimation of rock mechanical behaviors. To better understand the effects of size and strain rate on measured rocks, rock specimens with six different sizes were tested at six different strain rates under uniaxial compression using the MTS 815 Rock Mechanics Test System. Having determined that the size and strain rate significantly affect the peak strain, peak stress, elastic modulus, acoustic emission (AE), and failure pattern of the rock specimens, the relation was established between the strength and the size and strain rate of red sandstone. And the variation was revealed among the size and strain rate, the AE, and the failure pattern. It turned out that the peak stress was negatively correlated with the rock size and was positively correlated with the strain rate. When the length to diameter ratio (L/D) of the rock specimen was less than 2.0, the AE appeared mildly. The AE quantities gradually increased before the peak stress, and then sharply decreased after the peak stress. The failure pattern of the rock specimen was relatively complicated, with a fracture plane appearing along the axial direction. Conical failure type was also presented. When the L/D ratio of the specimen was greater than 2.0, the AE characteristics of red sandstone showed the radical model. There were relatively few AE rings before the peak stress. But the AE rings increased suddenly and dramatically during the peak stress. The rock specimens primarily failed with a single shear plane. Moreover, with an increase in the strain rate, the AE activities were enhanced and the AE quantities increased. When the strain rate of the rock specimen was less than 5.0?×?10^?4/s, the rock specimen failed with a shear or tensile-shear pattern. And when the strain rate was greater than 5.0?×?10^?4/s, the rock specimen tended to fail in a conical pattern.  相似文献   

Data integration in characterizing a fracture-cavity reservoir,Tahe oilfield,Tarim basin,China     

Yongqiang Li  Jiagen Hou  Xiaoqiang Ma 《Arabian Journal of Geosciences》2016,9(8):532

Fracture-cavity reservoirs can be described in terms of storage space, filling materials and distribution, however, characterizing these variables remains a challenge. In this study, a method was developed to characterize complex reservoirs by integrating outcrop, core, well log, and seismic data from the Tahe oilfield. Outcrop analogs were used to identify and qualitatively analyze the genesis of different reservoir spaces. Cores, well logs, and seismic data were used to identify different types of reservoir space in the subsurface, to describe the spatial distribution, and to establish the distribution pattern of fracture-cavity reservoirs. Clastic sediments, collapse breccia, and chemical fillings were described from the cores and used to assess porosity and permeability. On the basis of the results, a three-dimensional geological model was constructed incorporating a structural model, a reservoir space model, and a property model. Caves and fractures were the main storage spaces and seepage passages. The cave model was built using multi-point geostatistical simulation, while the fracture model was established using deterministic modeling combined with manual interpretations and ant-tracking technology.  相似文献   

Changing depositional environment revealed from sediment components,west of “Swatch of No Ground”, northern Bay of Bengal     

Purnima Bejugam  G. N. Nayak 《Arabian Journal of Geosciences》2016,9(9):551

The sediment cores of 20 cm length collected from 31 to 83 m range of water depth from the inner shelf of Bay of Bengal west of “Swatch of No Ground” were analyzed for grain size, organic carbon, total nitrogen, calcium carbonate and clay mineralogy. Grain size analysis revealed that the sediment size decreases from west to east within the study area indicating a possible direction of transport towards east parallel to the coast. The grain size also decreases with increasing water depth, i.e. north to south, indicating sediment contribution to the area of study from Hooghly and other local rivers. In the cores studied, illite was the dominant clay mineral which seems to be a product of glacial weathering under arid conditions with its source being the Himalayan region. The organic carbon content was low in the sediments and was attributed to low plankton production or intense oxidation processes. Low calcium carbonate percentage also supports the view of a low productivity in this region. Organic carbon increases gradually from west to east indicating its association with finer sediments and also indicates transport due to currents which drift the organic carbon away before it settles down within the sediments. Higher values relatively closer to the coast in the eastern side indicate additional contribution from Sunderban mangroves. The C/N ratio obtained indicates mixed source of terrestrial and marine for the organic matter in the sediments. Sedimentation rates available for deltaic plains and shelves off Bangladesh when adopted for the present area revealed that a 20 cm long sediment column was deposited in around 10 years. In most of the cores studied, a change in the trend of sediment components and organic carbon was observed at around 10 cm where grain size increases and organic carbon decreases towards the surface inferring that during the last 5 years, possible floods during NE monsoon or due to melting of ice in Himalaya are responsible for releasing additional water and material which brought a change in hydrodynamic conditions. The surface depletion of organic carbon indicates its dilution by the addition of coarser materials.  相似文献