Geophysical interpretation of a high-resolution seismic refraction profile in the Northern Apennines     

Giancarlo Biella  Roberto De  Franco  Martina Demartin  Riccardo Barzaghi  Fernando Sanso  Domenico Sguerso 《地学学报》1994,6(1):45-53

A combined seismic and gravimetric interpretation in the Northern Apennines area (Italy) is presented. To the knowledge of the authors, this is one of the few attempts to apply tomographic methodology to a seismic refraction profile. This procedure, together with the classical interpretation for defining lower reflectors, led to the formulation of quite an accurate model of the upper crust. A gravity analysis was performed concurrently taking into account the seismic results at different depths which correspond to different frequency domains in the gravity signal. While the medium- and high-frequency patterns have been solved by trial-and-error, the regional trend has been modelled applying the collocation procedure to the gravity data.  相似文献   

An innovative application of the Kinect in Earth sciences: quantifying deformation in analogue modelling of volcanoes     

Riccardo Tortini  Fabio L. Bonali  Claudia Corazzato  Simon A. Carn  Alessandro Tibaldi 《地学学报》2014,26(4):273-281

Measuring surface deformation is critical in analogue modelling of Earth science phenomena. Here, we present a novel application of the Microsoft Kinect sensor to measure vertical deformation in a scaled analogue model of Nisyros volcano (Greece), simulating two magmatic sources and related surface deformation. The Kinect permits capture of real time, 640 × 480 pixel, true‐colour images (RGB) and a grid of distances to the modelled surface with a horizontal and vertical resolution of ±1 mm. Using recorded distances permits quantification of vertical deformation in terms of maximum and average down‐ and uplift during deflation and inflation phases respectively, which is of crucial importance for defining the kinematics of faults formed during the modelling, determined from interpretation of the RGB images. Although other techniques have demonstrated similar or higher accuracy, our study demonstrates the cost‐effectiveness of the Kinect in analogue modelling of volcanoes.  相似文献   

Self-standing bent silicon crystals for very high efficiency Laue lens     

Valerio Bellucci  Riccardo Camattari  Vincenzo Guidi  Ilaria Neri  Nicolas Barri��re 《Experimental Astronomy》2011,31(1):45-58

Silicon mono-crystals have been bent thanks to a series of parallel superficial indentations on one of the largest faces of the crystals. This technique relies on irreversible compression of the crystal beneath and beside the indentations. This latter causes deformation with no need for external device, resulting in a uniform self-standing curvature within the crystal. Indented Si crystals have been characterized at European Synchrotron Radiation Facility using a monochromatic beam ranging from 150 to 700 keV. Crystals exhibited very high diffraction efficiency over a broad range of energy, peaking 95% at 150 keV. Measured angular spread of the diffracted beam was always very close to the morphological curvature of the sample under investigation, proving that the energy passband of bent crystals can be controlled by simply imparting a selected curvature to the sample. The method of superficial indentations was found to offer high reproducibility and easy control of diffraction properties of the crystals. Moreover the method is cheap and simple, being based on mass production tools. A Laue lens made of crystals bent by superficial indentations can provide high-efficiency concentration of hard x-ray photons, leading significant improvement in many astrophysical applications.  相似文献   

Large-scale stratigraphic architecture and sequence analysis of an early Pleistocene submarine canyon fill,Monte Ascensione succession (Peri-Adriatic basin,eastern central Italy)     

Claudio Di Celma  Riccardo Teloni  Andrea Rustichelli 《International Journal of Earth Sciences》2014,103(3):843-875

The Monte Ascensione succession (c. 2.65–2.1 Ma) is a well-exposed example of an exhumed submarine canyon fill embedded within slope hemipelagic mudstones. This gorge represented a long-lasting pathway for sediment transport and deposition and during the Gelasian delivered Apennine-derived clastic sediment to the adjacent Peri-Adriatic basin. A total of six principal lithofacies types, representing both canyon-confining hemipelagic deposits and canyon-filling turbidity current and mass-transport deposits, can be delineated in the studied sedimentary succession. The canyon-fill deposits display a marked cyclic character and the component lithofacies succeed one another to form at least fifteen fining-upward stratal units, which are interpreted to represent high-frequency, unconformity-bounded depositional sequences. Variability in the vertical repetition of constituent lithofacies allows the identification of three basic styles of sequence architecture that can be interpreted in terms of differing positions along a conceptual down-canyon depositional profile. An integrated chronology, based on biostratigraphic data and on palaeomagnetic polarity measurements, strongly supports a one-to-one correlation between the sequence-bounding surfaces and oxygen isotope stages G2–78, suggesting that the most feasible sequence-engendering mechanism is that of orbitally dictated glacio-eustatic changes in sea level, which regulated timing of sediment storage on the shelf and its redistribution beyond the shelf edge. One of the most significant aspects of this study is the demonstration that processes occurring within upper slope canyons can be expected to be strongly influenced by variations in sea level; that is, the erosional and depositional features evident in these deposits can be strongly controlled by allocyclic processes rather than autocyclic or random processes.  相似文献   

Multiple spacecraft rendezvous maneuvers by differential drag and low thrust engines     

Riccardo Bevilacqua  Jason S. Hall  Marcello Romano 《Celestial Mechanics and Dynamical Astronomy》2010,106(1):69-88

A novel two-phase hybrid controller is proposed to optimize propellant consumption during multiple spacecraft rendezvous maneuvers in Low Earth Orbit. This controller exploits generated differentials in aerodynamic drag on each involved chaser spacecraft to effect a propellant-free trajectory near to the target spacecraft during the first phase of the maneuver, and then uses a fuel optimal control strategy via continuous low-thrust engines to effect a precision dock during the second phase. In particular, by varying the imparted aerodynamic drag force on each of the chaser spacecraft, relative differential accelerations are generated between each chaser and the target spacecraft along two of the three translational degrees of freedom. In order to generate this required differential, each chaser spacecraft is assumed to include a system of rotating flat panels. Additionally, each chaser spacecraft is assumed to have continuous low-thrust capability along the three translational degrees of freedom and full-axis attitude control. Sample simulations are presented to support the validity and robustness of the proposed hybrid controller to variations in the atmospheric density along with different spacecraft masses and ballistic coefficients. Furthermore, the proposed hybrid controller is validated against a complete nonlinear orbital model to include relative navigation errors typical of carrier-phase differential GPS (CDGPS). Limitations of the proposed controller appear relative to the target spacecraft’s orbit eccentricity and a general characterization of the atmospheric density. Bounds on these variables are included to provide a framework within which the proposed hybrid controller can effect an extremely low propellant rendezvous of multiple chaser spacecraft to a desired target spacecraft.  相似文献   

Oligocene to Present kilometres scale subsidence and exhumation of the Ligurian Alps and the Tertiary Piedmont Basin (NW Italy) revealed by apatite (U–Th)/He thermochronology: correlation with regional tectonics     

Giovanni Bertotti  Pietro Mosca  Joaquim Juez  Riccardo Polino  Tibor Dunai 《地学学报》2006,18(1):18-25

The Ligurian Alps segment of the Alpine–Apennine orogen in NW Italy is unconformably covered by Upper Eocene to Holocene sediments in the Tertiary Piedmont Basin (TPB) and Po Plain. These sediments dip towards the north demonstrating the erosional nature of the southern border of the succession and implying that the adjacent orogenic belt formed the substratum rather than the margin of the sedimentary basin. Apatite (U–Th)/He and fission track thermochronology shows that the orogen first subsided and was buried at >4 km from 30 to 26 Ma and began its exhumation thereafter. From 26 Ma to present, this upward movement was contemporaneous with subsidence in the northern TPB. The couple exhumation in the S and subsidence in the N migrated northwards through time. Vertical movements in the area are similar to those reconstructed in Corsica. In both cases, the onset of exhumation becomes younger away from the Ligurian‐Provençal basin and has little correlation with the opening of the surrounding oceanic basins.  相似文献   

The radiation environment in a low earth orbit:the case of BeppoSAX     

Riccardo Campana  Mauro Orlandini  Ettore Del Monte  Marco Feroci  Filippo Frontera 《Experimental Astronomy》2014,37(3):599-613

Low-inclination, low altitude Earth orbits (LEO) are of increasing importance for astrophysical satellites, due to their low background environment. Here, the South Atlantic Anomaly (SAA) is the region with the highest amount of radiation. We study the radiation environment in a LEO (500–600 km altitude, 4^° inclination) through the particle background measured by the Particle Monitor (PM) experiment onboard the BeppoSAX satellite, between 1996 and 2002. Using time series of particle count rates measured by PM we construct intensity maps and derive SAA passage times and fluences. The low-latitude SAA regions are found to have an intensity strongly decreasing with altitude and dependent on the magnetic rigidity. The SAA extent, westward drift and strength vs altitude is shown.  相似文献   

Effects of capillary reflection in the performance of the collimator of the Large Area Detector on board LOFT     

Teresa Mineo  George W. Fraser  Adrian Martindale  Charly Feldman  Riccardo Campana  Giancarlo Cusumano  Marco Feroci 《Experimental Astronomy》2014,37(1):69-84

The Large Observatory For X-ray Timing (LOFT) is one of the candidate missions selected by the European Space Agency for an initial assessment phase in the Cosmic Vision programme. It is proposed for the M3 launch slot and has broad scientific goals related to fast timing of astrophysical X-ray sources. LOFT will carry the Large Area Detector (LAD), as one of the two core science instruments, necessary to achieve the challenging objectives of the project. LAD is a collimated detector working in the energy range 2-50 keV with an effective area of approximately 10 m ²at 8 keV. The instrument comprises an array of modules located on deployable panels. Lead-glass microchannel plate (MCP) collimators are located in front of the large-area Silicon Drift Detectors (SDD) to reduce the background contamination from off-axis resolved point sources and from the diffuse X-ray background. The inner walls of the microchannel plate pores reflect grazing incidence X-ray photons with a probability that depends on energy. In this paper, we present a study performed with an ad-hoc simulator of the effects of this capillary reflectivity on the overall instrument performance. The reflectivity is derived from a limited set of laboratory measurements, used to constrain the model. The measurements were taken using a prototype collimator whose thickness is similar to that adopted in the current baseline design proposed for the LAD. We find that the experimentally measured level of reflectivity of the pore inner walls enhances the off-axis transmission at low energies, producing an almost flat-top response. The resulting background increase due to the diffuse cosmic X-ray emission and sources within the field of view does not degrade the instrument sensitivity.  相似文献   

Sea-level curves: Perplexities of an end-user in morphotectonic applications   总被引：1，自引：0，他引：1  

Riccardo Caputo   《Global and Planetary Change》2007,57(3-4):417-423

Several sea-level curves, from the classical ones to some of the most recently published, are analysed and compared. Although this short paper is not a review of the original data and analytical methods used by the different authors, similarities and mainly differences between published sea-level curves are emphasised especially as concern the suggested height and age of the highstand sea-level peaks during the last 450 ka. The perplexities of an end-user when attempting to exploit different curves for investigating uplifted marine terraces are discussed and recommendations are suggested.  相似文献   

A Hercynian suture zone in Sardinia : geological and geochemical evidence     

Beatrice Cappelli  Luigi Carmignani  Francesca Castorina  Anselmo Di Pisa  Giacomo Oggiano  Riccardo Petrini 《Geodinamica Acta》2013,26(1-2):101-118

Abstract

The Hereynian basement of Northern Sardinia consists of two main teetonometamorphic complexes : the Southern Paleozoic Low to Medium Grade Metamorphic Complex (LMGMC) and the Northern (Precaimbrian ?) High Grade Metamorphic Complex (HGMC). These complexes are separateli bu the “Posada-Asinara Line” which is a several kilometer-wide mylonitie belt consisting of micaschist. parag-neiss and quartzite that cuts across all Northern Sardinia and contains scattered hodies of amphibolites with granulile and eclogite facies relies.

Major element composition of ampbibolites indicates they were derived from metamorphosed basalts of tholciitie affinity. REE and the relative abundances of HKS elements strongly suggest an oceanic basaltie prololith (N- and T-typc MORB). A whole-rock Sm-Nd isochron for the amphibolite protoliths yields an age of ea. 960 Ma.

The Northern Sardinia basement can he interpreted as a continental collisional zone with the “Posada-Asinara Line” representing a suture zone squeezed between a crustal nappe (HGMC), which represents the overthrust continental margin. and (he inner portion of the Varisean orogenie wedge, which represents the underthrust continental margin with its Paleozoic cover (LMGMC).

Geological and geochemical evidence indicate that the “Posada-Asinara Line” may he considered as part of the South European Hereynian Suture Zone.  相似文献