Mechanisms of riverbank failure along the Arno River,central Italy     

Stefano Dapporto  Massimo Rinaldi  Nicola Casagli  Pietro Vannocci 《地球表面变化过程与地形》2003,28(12):1303-1323

Riverbanks along the Arno River have been investigated with the aims of de?ning the main mechanisms of failure and retreat, their spatial distribution, and their causes. Geomorphological aspects were investigated by a reconnaissance of riverbank processes, for a number (26) of representative sites. Laboratory and in situ tests were then performed on a selected number of riverbanks (15). Based on the material characteristics, six main typologies of riverbanks have been de?ned, with homogeneous ?ne‐grained and composite banks representing the most frequent types. Slab‐type failures are the most frequent mechanism observed on ?ne‐grained banks, while cantilever failures prevail on composite banks. The role of river stage and related pore water pressure distributions in triggering the main observed mechanisms of failure has been investigated using two different types of stability analysis. The ?rst was conducted for 15 riverbanks, using the limit equilibrium method and considering simpli?ed hypotheses for pore water pressure distribution (annulment of negative pore pressures in the portion of the bank between low water stage and peak stage). Stability conditions and predicted mechanisms of failure are shown to be in reasonably good agreement with ?eld observations. Three riverbanks, representative of the main alluvial reaches of the river, were then selected for a more detailed bank stability analysis, consisting of: (a) de?nition of characteristic hydrographs of the reach with different return periods; (b) modelling of saturated and unsaturated ?ow using ?nite element seepage analysis; and (c) stability analysis with the limit equilibrium method, by adopting pore water pressure values derived from the seepage analysis. The results are compared to those obtained from the previous simpli?ed analysis, and are used to investigate the different responses, in terms of stability, to different hydrological and riverbank conditions. Copyright © 2003 John Wiley & Sons, Ltd.  相似文献   

Melt/biotite B/B isotopic fractionation and the boron local environment in the structure of volcanic glasses     

Sonia Tonarini  Claudia Forte  Giorgio Ferrara 《Geochimica et cosmochimica acta》2003,67(10):1863-1873

This paper is focused on the role of boron coordination in determining the ¹¹B/¹⁰B isotopic fractionation between melt/glass and biotite at magmatic temperatures. For this purpose, three evolved volcanic rocks from Roccastrada, Mt. Amiata, and Mt. Cimini belonging to the Neogene-Quaternary magmatism of central Italy were studied. In these samples, the measured boron biotite-glass partition coefficient ranges between 0.004 and 0.011, indicating that boron behaves as an incompatible element during biotite crystallization. The ¹¹B magic-angle spinning nuclear magnetic resonance (NMR) spectra reveal the presence of trigonal BO_3/2 units, tetrahedral BO_4/2⁻ sites, and three-coordinated BO_2/2O⁻ species containing one nonbridging oxygen. The relative contributions of these different boron sites were estimated by spectral deconvolution, and it was observed that the fraction of trigonally coordinated boron decreases with increasing K₂O concentration in the glass. The ¹¹B/¹⁰B isotopic fractionation between biotite and melt/glass was observed to be large even at magmatic temperatures and was found to be 1.0066 (Roccastrada sample), 1.00535 (Mt. Amiata sample), and 1.00279 (Mt. Cimini sample). Fractionation is mostly related to the relative amount of trigonal and tetrahedral boron sites in the glass network rather than to other processes, including the speciation of hydrous species in the glass structure. The measured α values are significantly higher than the calculated ones obtained using the reduced partition function ratios (RPFRs) for B(OH)₃ and B(OH)₄⁻ as reported by Kakihana et al. (1977) and the abundance of trigonal and tetrahedral boron obtained by ¹¹B NMR spectra. Furthermore, a nonlinear relationship is observed between the percentage of BO₄ in the glass structure and the measured 1000lnα, suggesting that the approximation of monomeric B(OH)₃ and B(OH)₄⁻ species contributions through ideal mixing in calculating the RPFRs in polyanions (Oi et al., 1989) probably does not apply to silicate glasses.The large B isotopic fractionation measured between glass and biotite and its dependence on the boron coordination in the glass are a limitation to the use of δ¹¹B in the mineral to characterize magmas. Nonetheless, the high incompatible behavior of boron in the most common magmatic minerals rules out that fractional crystallization significantly modified the B isotopic composition of the melt.  相似文献   

Pressure-Dependence of Rare Earth Element Distribution in Amphibolite- and Granulite- Grade Garnets. A LA-ICP-MS Study   总被引：4，自引：0，他引：4  

Fernando Bea  Pilar Montero  Giorgio Garuti  Federica Zacharini 《Geostandards and Geoanalytical Research》1997,21(2):253-270

Using an excimer (KrF) laser ablation ICP-MS system, we studied the distribution of REE in garnets from metapelites and metabasites from Ivrea-Verbano (Western Alps, Italy) and from the Peña Negra Anatectic Complex (Central Iberia), finding systematic variations that correlate well with the metamorphic grade. Chondrite-normalized REE patterns of garnets from amphibolite-grade metapelites have lower-than-chondrite levels from La to Sm, a very small or no Eu anomaly, and a steep rise in the abundance of heavy REE as the atomic number increases. Metapelitic garnets from the amphibolite-granulite transition have a marked Eu negative anomaly and are enriched in MREE such that Sm is 10-15 times chondrite and the pattern is almost flat from Dy to Yb-Lu. In garnets from granulite-grade metapelites, the intensity of the Eu anomaly and the relative concentration of Nd, Sm, Gd and Tb increase, with almost flat chondrite-normalized patterns from Sm to Lu. Garnets from mafic granulites are remarkably similar to those of metapelitic garnets equilibrated at the same pressure, except for the Eu anomaly. The apparent paradox of enhanced uptake of larger REE ions with increasing pressure is attributed to the 3M²⁺ 2REE³⁺+ vacancy substitution, which produces a net decrease in the dimensions of the unit-cell of garnet. Variations in REE patterns depend essentially on the pressure and have little dependence on either temperature, bulk-composition of garnet, or REE whole-rock composition, so they could represent a new approach for geobarometric studies. The best numerical parameter to express pressure-related variations of REE distribution in garnets is the Gd/Dy ratio which does not seem perceptibly affected by disequilibrium partitioning. The regression equation between GASP pressure and the average Gd/Dy^garnet is P = 3.6 + 5.6 Gd/Dy. This equation seems to be reliable for garnets: (1)equilibrated within a pressure range of 4-9 kbar, (2) coexisting with modal monazite; and (3) with unit-cell dimensions under 11.46 Å.  相似文献   

Paleogeography and structure of the central Mediterranean: Sicily and its offshore area   总被引：1，自引：0，他引：1  

R. Catalano  P. Di Stefano  A. Sulli  F.P. Vitale 《Tectonophysics》1996,260(4):291-323

The geology of the mainland and offshore of Sicily is illustrated by a few geologic sections and seismic profiles across the late Cenozoic orogenic belt of central and western Sicily and across the Sardinia Channel and Sicily Straits. This belt is the result of several tectonic events. Deformation involved mainly the sedimentary cover of the old African continental margin characterized by a broad basinal domain, flanked along its external (southern) margin by a shallow-water carbonate platform attached to Africa in the Triassic. Compressional deformation started in the more internal basinal rock assemblages overlying a thinned crust. The most important structural characteristic of the early phase of thrusting is the duplex pile forming the bulk of the chain in Central Western Sicily. The structure consists of a basal allochthon, made up of Permian to Middle Triassic layers, an intermediate duplex wedge, composed of competent Mesozoic carbonates, and a roof complex, including Upper Mesozoic-Lower Tertiary less competent rocks. Large-scale clockwise rotation of the thrusts accompanied transpressional movements in the hinterland during the Pliocene. Right oblique reverse faults modified the previous tectonic contacts between the allochthons in the hinterland zones. Contemporaneous south-directed imbrications affected the southern external areas, progressively incorporating foreland and piggyback basins. Development of the Gela Thrust System appears to be linked to the transpressional event; its accretion is also related to contemporaneous underthrusting at deeper levels of Mesozoic carbonate substratum. The older buried thrust sheets were pushed up to the surface breaching the deformed Tertiary cover of the Gela TS. Northwards in the belt post-Messinian normal growth faults opened half graben whose sedimentary fill underwent structural inversion. Alternation of extension and compression tectonics characterizes the Sicilian continental margin in the last million years.  相似文献   

The mafic-ultramafic complex near Finero (Ivrea-Verbano Zone), I. Chemistry of MORB-like magmas     

Meihua Lu  Albrecht W. Hofmann  Maurizio Mazzucchelli  Giorgio Rivalenti 《Chemical Geology》1997,140(3-4):207-222

Geochemical data are presented for the meta-igneous, mafic-ultramafic complex near Finero. This complex is in contact with a phlogopite-bearing mantle peridotite and is subdivided into the Internal Gabbro unit, the Amphibole Peridotite unit, and the External Gabbro unit. The Internal Gabbro and the Amphibole Peridotite units consist of coarse-grained, chemically heterogeneous cumulates, whereas the External Gabbro unit is generally massive, chemically more uniform and approximately representative of the residual melt with MgO contents between 6.6 and 9.1% and Mg numbers between 38 and 58. Both whole-rock and mineral contents of Ni and Cr are significantly higher (at similar Mg numbers) in the Amphibole Peridotite unit than in the Internal Gabbro unit. The most straightforward interpretation of this is that the Amphibole Peridotite unit accumulated after the influx of fresh mafic (or ultramafic) magma into the magma chamber. Major-element chemical trends are continuous from the Amphibole Peridotite unit to the External Gabbro unit and are consistent with closed-system fractionation with no further addition of magma or contamination by wall or roof rock assimilation. In the External Gabbro unit, total FeO and TiO₂ contents are strongly correlated with each other (and with P₂O₅ and Zr) and reach values as high as 19 and 4%, respectively, indicating an advanced degree of crystal fractionation along a tholeftic trend. The External Gabbro samples have generally smooth normalized trace element patterns, which are consistent with being representative of a liquid composition. The residual nature of the External Gabbro magma is also indicated by negative Eu and Sr anomalies, clear evidence for prior feldspar fractionation. REE patterns are otherwise indistinguishable from N-type MORB, but Th and U are significantly more depleted than in MORB. This Th and U depletion is similar to that found in olivine basalts and picrites on Iceland and Hawaii; its origin is not well understood. No evidence is seen for any assimilation of crystal material, in sharp contrast with the situation of the igneous complex in Val Sesia near Balmuccia, where the magma composition is dominated by assimilation of crust. We suggest that the heat provided by at most two injections of magma near Finero was insufficient to induce crystal anatexis, in contrast with the excess heat supplied by multiple magma injections at Balmuccia.  相似文献   

The 3 June 1994 Java Tsunami: A Post-Event Survey of the Coastal Effects     

Maramai  Alessandra  Tinti  Stefano 《Natural Hazards》1997,15(1):31-49

The paper is a report of the field campaign undertaken by an international team (Italian, French and Indonesian) a few weeks after the occurrence of a tsunami invading the south-eastern coast of Java (Indonesia) and it complements the results of a concurrent field survey by Asian and USA researchers. The tsunamigenic earthquake occurred on 3 of June 1994 in the Indian Ocean about 200 km south of Java. The tsunami caused severe damage and claimed many victims in some coastal villages. The main purpose of the survey was to measure the inundation and the runup values as well as to ascertain the possible morphological changes caused by the wave attacks. Attention was particularly focussed on the most affected districts, that is Lumajang, Jember and Banyuwangi in Java, although also the districts of Negera, Tebanan and Denpasar in Bali were examined. The most severe damage was observed in the Banyuwangi district, where the villages of Rajekwesi, Pancer and Lampon were almost completely levelled by the violent waves. Most places were hit by three significant waves with documented wave height often exceeding 5 m. The maximum runup value (9.50 m) was measured at Rajekwesi, where also the most impressive erosion phenomena could be found. In contrast, only in one place of the neighbouring island of Bali was there a slight tsunami, the rest of the island being practically unaffected.  相似文献   

Monitoring and modelling of pore water pressure changes and riverbank stability during flow events   总被引：1，自引：0，他引：1  

Massimo Rinaldi  Nicola Casagli  Stefano Dapporto  Alessandro Gargini 《地球表面变化过程与地形》2004,29(2):237-254

Pore water pressures (positive and negative) were monitored for four years (1996–1999) using a series of tensiometer‐piezometers at increasing depths in a riverbank of the Sieve River, Tuscany (central Italy), with the overall objective of investigating pore pressure changes in response to ?ow events and their effects on bank stability. The saturated/unsaturated ?ow was modelled using a ?nite element seepage analysis, for the main ?ow events occurring during the four‐year monitoring period. Modelling results were validated by comparing measured with computed pore water pressure values for a series of representative events. Riverbank stability analysis was conducted by applying the limit equilibrium method (Morgenstern‐Price), using pore water pressure distributions obtained by the seepage analysis. The simulation of the 14 December 1996 event, during which a bank failure occurred, is reported in detail to illustrate the relations between the water table and river stage during the various phases of the hydrograph and their effects on bank stability. The simulation, according to monitored data, shows that the failure occurred three hours after the peak stage, during the inversion of ?ow (from the bank towards the river). A relatively limited development of positive pore pressures, reducing the effective stress and annulling the shear strength term due to the matric suction, and the sudden loss of the con?ning pressure of the river during the initial drawdown were responsible for triggering the mass failure. Results deriving from the seepage and stability analysis of nine selected ?ow events were then used to investigate the role of the ?ow event characteristics (in terms of peak stages and hydrograph characteristics) and of changes in bank geometry. Besides the peak river stage, which mainly controls the occurrence of conditions of instability, an important role is played by the hydrograph characteristics, in particular by the presence of one or more minor peaks in the river stage preceding the main one. Copyright © 2004 John Wiley & Sons, Ltd.  相似文献   

Crustal and mantle strengths in continental lithosphere: is the jelly sandwich model obsolete?     

Juan Carlos Afonso  Giorgio Ranalli 《Tectonophysics》2004,394(3-4):221-232

The relative importance of the contribution of the lower crust and of the lithospheric mantle to the total strength of the continental lithosphere is assessed systematically for realistic ranges of layer thickness, composition, and temperature. Results are presented as relative strength maps, giving the ratio of the lower crust to upper mantle contribution in terms of crustal thickness and surface heat flow. The lithosphere shows a “jelly sandwich” rheological layering for low surface heat flow, thin to average crustal thickness, and felsic or wet mafic lower crustal compositions. On the other hand, most of the total strength resides in the seismogenic crust in regions of high surface heat flow, crust of any thickness, and dry mafic lower crustal composition.  相似文献   

A model for oxygen and sulfur isotope fractionation in sulfate during bacterial sulfate reduction processes     

Benjamin Brunner  Stefano M. Bernasconi  Jutta Kleikemper 《Geochimica et cosmochimica acta》2005,69(20):4773-4785

We present a model of bacterial sulfate reduction that includes equations describing the fractionation relationship between the sulfur and the oxygen isotope composition of residual sulfate (δ³⁴S_{SO4_residual}, δ¹⁸O_{SO4_residual}) and the amount of residual sulfate. The model is based exclusively on oxygen isotope exchange between cell-internal sulfur compounds and ambient water as the dominating mechanism controlling oxygen isotope fractionation processes. We show that our model explains δ³⁴S_{SO4_residual} vs. δ¹⁸O_{SO4_residual} patterns observed from natural environments and from laboratory experiments, whereas other models, favoring kinetic isotope fractionation processes as dominant process, fail to explain many (but not all) observed δ³⁴S_{SO4_residual} vs. δ¹⁸O_{SO4_residual} patterns. Moreover, we show that a “typical” δ³⁴S_{SO4_residual} vs. δ¹⁸O_{SO4_residual} slope does not exist. We postulate that measurements of δ³⁴S_{SO4_residual} and δ¹⁸O_{SO4_residual} can be used as a tool to determine cell-specific sulfate reduction rates, oxygen isotope exchange rates, and equilibrium oxygen isotope exchange factors. Data from culture experiments are used to determine the range of sulfur isotope fractionation factors in which a simplified set of equations can be used. Numerical examples demonstrate the application of the equations. We postulate that, during denitrification, the oxygen isotope effects in residual nitrate are also the result of oxygen isotope exchange with ambient water. Consequently, the equations for the relationship between δ³⁴S_{SO4_residual}, δ¹⁸O_{SO4_residual}, and the amount of residual sulfate could be modified and used to calculate the fractionation-relationship between δ¹⁵N_{NO3_residual}, δ¹⁸O_{NO3_residual}, and the amount of residual nitrate during denitrification.  相似文献   

Refinements to the Silvestri’s theory for the evaluation of the seismic actions in flat-bottom silos containing grain-like material     

Luca Pieraccini  Stefano Silvestri  Tomaso Trombetti 《Bulletin of Earthquake Engineering》2015,13(11):3493-3525

  相似文献