Frontal dynamics boost primary production in the summer stratified Mediterranean sea   总被引：1，自引：1，他引：0  

Antonio Olita  Arthur Capet  Mariona Claret  Amala Mahadevan  Pierre Marie Poulain  Alberto Ribotti  Simón Ruiz  Joaquín Tintoré  Antonio Tovar-Sánchez  Ananda Pascual 《Ocean Dynamics》2017,67(6):767-782

Bio-physical glider measurements from a unique process-oriented experiment in the Eastern Alboran Sea (AlborEx) allowed us to observe the distribution of the deep chlorophyll maximum (DCM) across an intense density front, with a resolution (～ 400 m) suitable for investigating sub-mesoscale dynamics. This front, at the interface between Atlantic and Mediterranean waters, had a sharp density gradient (Δρ ～ 1 kg/m³ in ～ 10 km) and showed imprints of (sub-)mesoscale phenomena on tracer distributions. Specifically, the chlorophyll-a concentration within the DCM showed a disrupted pattern along isopycnal surfaces, with patches bearing a relationship to the stratification (buoyancy frequency) at depths between 30 and 60 m. In order to estimate the primary production (PP) rate within the chlorophyll patches observed at the sub-surface, we applied the Morel and Andrè (J Geophys Res 96:685–698 1991) bio-optical model using the photosynthetic active radiation (PAR) from Argo profiles collected simultaneously with glider data. The highest production was located concurrently with domed isopycnals on the fresh side of the front, suggestive that (sub-)mesoscale upwelling is carrying phytoplankton patches from less to more illuminated levels, with a contemporaneous delivering of nutrients. Integrated estimations of PP (1.3 g C m^?2d^?1) along the glider path are two to four times larger than the estimations obtained from satellite-based algorithms, i.e., derived from the 8-day composite fields extracted over the glider trip path. Despite the differences in spatial and temporal sampling between instruments, the differences in PP estimations are mainly due to the inability of the satellite to measure DCM patches responsible for the high production. The deepest (depth > 60 m) chlorophyll patches are almost unproductive and probably transported passively (subducted) from upper productive layers. Finally, the relationship between primary production and oxygen is also investigated. The logarithm of the primary production in the DCM interior (chlorophyll (Chl) > 0.5 mg/m³) shows a linear negative relationship with the apparent oxygen utilization, confirming that high chlorophyll patches are productive. The slope of this relationship is different for Atlantic, mixed interface waters and Mediterranean waters, suggesting the presence of differences in planktonic communities (whether physiological, population, or community level should be object of further investigation) on the different sides of the front. In addition, the ratio of optical backscatter to Chl is high within the intermediate (mixed) waters, which is suggestive of large phytoplankton cells, and lower within the core of the Atlantic and Mediterranean waters. These observations highlight the relevance of fronts in triggering primary production at DCM level and shaping the characteristic patchiness of the pelagic domain. This gains further relevance considering the inadequacy of optical satellite sensors to observe DCM concentrations at such fine scales.  相似文献   

Estimating external magnetic field differences at high geomagnetic latitudes from a single station          下载免费PDF全文

Ciarán D. Beggan  Laurence Billingham  Ellen Clarke 《Geophysical Prospecting》2018,66(6):1227-1240

Providing an accurate estimate of the magnetic field on the Earth's surface at a location distant from an observatory has useful scientific and commercial applications, such as in repeat station data reduction, space weather nowcasting or aeromagnetic surveying. While the correlation of measurements between nearby magnetic observatories at low and mid‐latitudes is good, at high geomagnetic latitudes () the external field differences between observatories increase rapidly with distance, even during relatively low magnetic activity. Thus, it is of interest to describe how the differences (or errors) in external magnetic field extrapolation from a single observatory grow with distance from its location. These differences are modulated by local time, seasonal and solar cycle variations, as well as geomagnetic activity, giving a complex temporal and spatial relationship. A straightforward way to describe the differences are via confidence intervals for the extrapolated values with respect to distance. To compute the confidence intervals associated with extrapolation of the external field at varying distances from an observatory, we used 695 station‐years of overlapping minute‐mean data from 37 observatories and variometers at high latitudes from which we removed the main and crustal fields to isolate unmodelled signals. From this data set, the pairwise differences were analysed to quantify the variation during a range of time epochs and separation distances. We estimate the 68.3%, 95.4% and 99.7% confidence levels (equivalent to the 1σ, 2σ and 3σ Gaussian error bounds) from these differences for all components. We find that there is always a small non‐zero bias that we ascribe to instrumentation and local crustal field induction effects. The computed confidence intervals are typically twice as large in the north–south direction compared to the east‐west direction and smaller during the solstice months compared to the equinoxes.  相似文献   

Flow patterns in temporary rivers: a methodological approach applied to southern Iberia     

J. Delso  J. A. Fernández-Yuste 《水文科学杂志》2017,62(10):1551-1563

Temporary flow patterns remain understudied, despite their wide distribution and their importance for managerial practices and river conservation. This paper explores an advanced procedure for the characterization and definition of temporary flow patterns based on the frequency, duration and magnitude of non-flow (cessation) periods. A detailed analysis of flow patterns was performed on 12 rivers of the Guadiana Basin in Southern Iberia (10 in Spain and 2 in Portugal). An open methodology that can allow managers to better characterize and improve the structure and functioning of those rivers is suggested. This methodology is based on inter- and intra-annual variability analysis and its integration with river ecotypes. Within the methodology, a set of parameters related to ecological features of temporary rivers is proposed for application. This methodology may contribute to a better definition of cessation periods and an integrated understanding of the flow requirements of temporary rivers.  相似文献   

Extreme floods and their relationship with tropical cyclones in Puerto Rico     

José J. Hernández Ayala  David Keellings  Peter R. Waylen  Corene J. Matyas 《水文科学杂志》2017,62(13):2103-2119

An extreme value analysis (EVA) point process approach has been implemented to examine the flood characteristics of Puerto Rico when tropical cyclones (TCs) are present in the discharge series and when they are removed from it. Mean daily discharge values that exceeded the 99th percentile thresholds were used in both the TC and non-TC data series. In nine of the 12 stations the maximum discharge was associated with a TC, with hurricanes Hortense (1996), Georges (1998) and Eloise (1975) responsible for most of the maximum peaks at each site. Percentage changes in the generalized extreme value parameters, which include location (central tendency), scale (variance) and shape (skewness), between the TC and non-TC data exhibited a decrease in the majority of stations. Stations in the eastern interior and central region of the island showed the largest decrease in all parameters, in flood occurrences and in return periods when TCs were removed from the series.  相似文献   

Effects of fracture intersections on seismic dispersion: theoretical predictions versus numerical simulations          下载免费PDF全文

Junxin Guo  J. Germán Rubino  Stanislav Glubokovskikh  Boris Gurevich 《Geophysical Prospecting》2017,65(5):1264-1276

The detection and characterisation of domains of intersecting fractures are important goals in several disciplines of current interest, including exploration and production of unconventional reservoirs, nuclear waste storage, CO₂ sequestration, and groundwater hydrology, among others. The objective of this study is to propose a theoretical framework for quantifying the effects of fracture intersections on the frequency‐dependent elastic properties of fluid‐saturated porous and fractured rocks. Three characteristic frequency regimes for fluid pressure communication are identified. In the low‐frequency limit, fractures are in full pressure communication with the embedding porous matrix and with other fractures. Conversely, in the high‐frequency limit, fractures are hydraulically isolated from the matrix and from other fractures. At intermediate frequencies, fractures are hydraulically isolated from the matrix porosity but can be in hydraulic communication with each other, depending on whether fracture sets are intersecting. For each frequency regime, the effective stiffness coefficients are derived using the linear‐slip theory and anisotropic Gassmann equations. Explicit mathematical expressions for the two characteristic frequencies that separate the three frequency regimes are also determined. Theoretical predictions are then applied to two synthetic 2D samples, each containing two orthogonal fracture sets: one with and another without intersections. The resulting stiffness coefficients, Thomsen‐style anisotropy parameters, and the transition frequencies show good agreement with corresponding numerical simulations. The theoretical results are applicable not only to 2D but also to 3D fracture systems and are amenable to being employed in inversion schemes designed to characterise fracture systems.  相似文献   

Uncertainty analysis and probabilistic segmentation of electrical resistivity images: the 2D inverse problem          下载免费PDF全文

Juan Luis Fernández‐Martínez  Shan Xu  Colette Sirieix  Zulima Fernández‐Muniz  Joëlle Riss 《Geophysical Prospecting》2017,65(Z1):112-130

In this paper, we present the uncertainty analysis of the 2D electrical tomography inverse problem using model reduction and performing the sampling via an explorative member of the Particle Swarm Optimization family, called the Regressive‐Regressive Particle Swarm Optimization. The procedure begins with a local inversion to find a good resistivity model located in the nonlinear equivalence region of the set of plausible solutions. The dimension of this geophysical model is then reduced using spectral decomposition, and the uncertainty space is explored via Particle Swarm Optimization. Using this approach, we show that it is possible to sample the uncertainty space of the electrical tomography inverse problem. We illustrate this methodology with the application to a synthetic and a real dataset coming from a karstic geological set‐up. By computing the uncertainty of the inverse solution, it is possible to perform the segmentation of the resistivity images issued from inversion. This segmentation is based on the set of equivalent models that have been sampled, and makes it possible to answer geophysical questions in a probabilistic way, performing risk analysis.  相似文献   

Atlas of susceptibility to pollution in marinas. Application to the Spanish coast     

Aina G. Gómez  Bárbara Ondiviela  María Fernández  José A. Juanes 《Marine pollution bulletin》2017,114(1):239-246

An atlas of susceptibility to pollution of 320 Spanish marinas is provided. Susceptibility is assessed through a simple, fast and low cost empirical method estimating the flushing capacity of marinas. The Complexity Tidal Range Index (CTRI) was selected among eleven empirical methods. The CTRI method was selected by means of statistical analyses because: it contributes to explain the system's variance; it is highly correlated to numerical model results; and, it is sensitive to marinas' location and typology. The process of implementation to the Spanish coast confirmed its usefulness, versatility and adaptability as a tool for the environmental management of marinas worldwide. The atlas of susceptibility, assessed through CTRI values, is an appropriate instrument to prioritize environmental and planning strategies at a regional scale.  相似文献   

Geophysical evidence of the Eastern Marginal Fault of the Cheb Basin (Czech Republic)     

Vratislav Blecha  Tomáš Fischer  Petr Tábořík  Jan Vilhem  Radek Klanica  Jan Valenta  Petra Štěpančíková 《Studia Geophysica et Geodaetica》2018,62(4):660-680

The western part of the Bohemian Massif hosts an intersection of two regional fault zones, the SW-NE trending Oh?e/Eger Graben and the NNW-SSE trending Mariánské Lázně Fault, which has been reactivated several times in the geological history and controlled the formation of the Tertiary Cheb Basin. The broader area of the Cheb Basin is also related to permanent seismic activity of M_L 3+ earthquake swarms. The Eastern Marginal Fault of the Cheb Basin (northern segment of the Mariánské Lázně Fault) separates the basin sediments and underlying granites in the SW from the Kru?né Hory/Erzgebirge Mts. crystalline unit in the NE. We describe a detailed geophysical survey targeted to locating the Eastern Marginal Fault and determining its geometry in the depth. The survey was conducted at the Kopanina site near the Nový Kostel focal zone, which shows the strongest seismic activity of the whole Western Bohemia earthquake swarm region. Complex geophysical survey included gravimetry, electrical resistivity tomography, audiomagnetotellurics and seismic refraction. We found that the rocks within the Eastern Marginal Fault show low resistivity, low seismic velocity and density, which indicates their deep fracturing, weathering and higher water content. The dip of the fault in shallow depths is about 60° towards SW. At greater depths, the slope turns to subvertical with dip angle of about 80°. Results of geoelectrical methods show blocky fabric of the Cheb Basin and deep weathering of the granite bedrock, which is consistent with geologic models based on borehole surveys.  相似文献   

Cause of scale inconsistencies in DORIS time series     

Petr Štěpánek  Vratislav Filler 《Studia Geophysica et Geodaetica》2018,62(4):562-585

In this paper we analyze the scale of the DORIS (Doppler Orbitography and Radiopositioning Integrated by Satellite) solutions with respect to DORIS extension of the International Terrestrial Reference Frame (ITRF) for Precise Orbit Determination DPOD2014. The main goal is to explain the scale inconsistencies and to find the optimal solution reaching low-biased and consistent scale time series. Our analysis profits from 4 different strategies based only on the Geodetic Observatory Pecný analysis center solution, using DORIS exchange format data 2.2. A difference in the sequence of the solutions directly corresponds to one of the changes in the solution settings: data elevation dependent weighting, application of data validity indicators and application of phase center - reference point correction. We process multi-satellite and single-satellite solutions for the time period 2011.0–2017.0. Our analysis examines scale inconsistency issues in 2011/2012 and in 2015. The scale increment in 2011/2012 is explained as a result of the concurrence of changes in satellite constellation and change in the provider data validity standards for Cryosat-2 and Jason-2 satellites. The scale increment in 2015 is explained as the effect of change in the standards for phase center - reference center corrections for Saral, Jason-2 and Cryosat-2 satellites. Moreover, comparing the solutions with and without elevation dependent data downweighting using the same elevation cutoff (10°), we found a significant reduction of scale bias and scale variation applying the data downweighting. The data downweighting improved also the station positioning repeatability. We demonstrate that the solution, which is completely free from the additional data associated with observations in DORIS exchange format 2.2 and includes the data downweighting law, eventuates in a consistent scale time series with the lowest offset with respect to DPOD2014 (version 1.0) (12.7 ± 2.3 mm for 2011.0–2017.0). The only remaining scale issue is the part of 2011/2012 increment of around 5 mm, explained by a change in the DORIS satellite constellation.  相似文献   

SlugIn 1.0: A Free Tool for Automated Slug Test Analysis          下载免费PDF全文

Sergio Martos‐Rosillo  Carolina Guardiola‐Albert  Alberto Padilla Benítez  Joaquín Delgado Pastor  Antonio Azcón González  Juan José Durán Valsero 《Ground water》2018,56(3):362-365

The correct characterization of aquifer parameters is essential for water‐supply and water‐quality investigations. Slug tests are widely used for these purposes. While free software is available to interpret slug tests, some codes are not user‐friendly, or do not include a wide range of methods to interpret the results, or do not include automatic, inverse solutions to the test data. The private sector has also generated several good programs to interpret slug test data, but they are not free of charge. The computer program SlugIn 1.0 is available online for free download, and is demonstrated to aid in the analysis of slug tests to estimate hydraulic parameters. The program provides an easy‐to‐use Graphical User Interface. SlugIn 1.0 incorporates automated parameter estimation and facilitates the visualization of several interpretations of the same test. It incorporates solutions for confined and unconfined aquifers, partially penetrating wells, skin effects, shape factor, anisotropy, high hydraulic conductivity formations and the Mace test for large‐diameter wells. It is available in English and Spanish and can be downloaded from the web site of the Geological Survey of Spain. Two field examples are presented to illustrate how the software operates.  相似文献