Short note: A simple nomogram for interpretation due to magnetic horizontal cylinders     

Ibrahim Kara  Davut Aydogan  F. Ahmet Yüksel 《Geophysical Prospecting》1998,46(6):659-663

The magnetic anomaly ΔF due to a long horizontal cylinder yields three points related to its extrema. A nomogram is presented for the determination of some source parameters of the causative body.  相似文献   

A taxonomic study on the families Lepadellidae and Trichocercidae （Rotifera： Monogononta） of Turkey     

KAYA Murat ALTINDAG Ahmet 《中国海洋湖沼学报》2007,25(4):423-426

Thirteen rotifer species belonging to the families Lepadellidae and Trichocercidae were studied taxonomically from nine water bodies in Turkey. Lepadella biloba is a new entry to the Turkish rotifer fauna. All species were drawn under a light microscope using a camera lucida.  相似文献   

Erratum to: Visualization of geotechnical data by means of geographic information system: a case study in Eskisehir city (NW Turkey)     

Ahmet Orhan  Hasan Tosun 《Environmental Earth Sciences》2010,61(5):1097

  相似文献   

Microthermometric and stable isotopic (O and H) characteristics of fluid inclusions in the porphyry related Çöpler (İliç - Erzincan) gold deposit,central eastern Turkey     

Oktay Canbaz  Ahmet Gökce 《Central European Journal of Geosciences》2014,6(2):139-147

The Çöpler gold deposit occurs within the stockwork of quartz hosted by the Çöpler granitoid (Eosen) and by surrounding metasediments of Keban metamorphic (Late Paleozoic - Early Mesozoic) and the Munzur limestones (Late Carboniferous - Early Cretaceous). Native gold accompanied by small amounts of chalcopyrite, pyrite, magnetite, maghemite, hematite, fahlerz, marcasite, bornite, galena, sphalerite, specular hematite, goethite, lepidochrosite and bravoitic pyrite within the stockwork ore veinlets. In addition, epidote (pistazite - zoisite), garnet, scapolite, chlorite, tremolite/actinolite, muscovite and opaque minerals were determined within the veinlets occurred in skarn zones. The study of fluid inclusions in quartz veinlets showed that the hydrothermal fluids contain CaCl₂, MgCl₂ and NaCl and the salinities of the two phases (L+V) inclusions range from 1.7 to 20.6% NaCl equivalent. Salinity values up to 44% were determined within the halite bearing three phases inclusions. Their homogenization temperature values have a wide range from 145.0 to 380.0°C, indicative of catathermal/hypothermal to epithermal conditions. The δ ¹⁸O and δD values of the fluid inclusion waters from the Çöpler granitoid correspond to those assigned to Primary Magmatic Water, those from the metasediments of Keban metamorphics fall outside of the Primary Magmatic and are within the Metamorphic Water field. A sample from a quartz vein within the skarn zone hosted by the Munzur limestones has a particularly low δD value. The results suggest that fluids derived from the granitoids were mixed with those derived from the metasediments of Keban metamorphics and the the Munzur limestones and resulting in quartz veinlets in these lithologies and the formation of stockwork ores. In view of the occurrence, the features described and processes envisaged for this study area may be applicable in similar settings.  相似文献   

Estimation of relative humidity based on artificial neural network approach in the Aegean Region of Turkey     

Abdulkadir Yasar  Erdo?an Simsek  Mehmet Bilgili  Ahmet Yucel  Ilhami Ilhan 《Meteorology and Atmospheric Physics》2012,115(1-2):81-87

The aim of this study is to estimate the monthly mean relative humidity (MRH) values in the Aegean Region of Turkey with the help of the topographical and meteorological parameters based on artificial neural network (ANN) approach. The monthly MRH values were calculated from the measurement in the meteorological observing stations established in Izmir, Mugla, Aydin, Denizli, Usak, Manisa, Kutahya and Afyonkarahisar provinces between 2000 and 2006. Latitude, longitude, altitude, precipitation and months of the year were used in the input layer of the ANN network, while the MRH was used in output layer of the network. The ANN model was developed using MATLAB software, and then actual values were compared with those obtained by ANN and multi-linear regression methods. It seemed that the obtained values were in the acceptable error limits. It is concluded that the determination of relative humidity values is possible at any target point of the region where the measurement cannot be performed.  相似文献   

Investigation of trace metals distribution in water,sediments and wetland plants of K(i)z(i)l(i)rmak Delta,Turkey     

Mehmet Soner Engin  Ahmet Uyanik  Seydahmet Cay 《国际泥沙研究》2017,32(1)

In this study,accumulation and distribution of Pb,Cu,Zn,Co,Ni,Mn and Fe in water,bottom sediments and four plant species (Myriophyllum verticillatum,Hydrocharis morsus-ranae,Nymphaea alba and Typha latifolia) were investigated in (C)ernek Lake of Kizihrmak Delta.The Kizdirmak Delta is one of the largest natural wetlands of Turkey and it is protected by the Ramsar convention since 1993.Selected physico-chemical parameters such as pH,conductivity and dissolved oxygen and also trace metal concentrations were monitored in water.All the parameters obtained were found higher than that of the national standards for the protected lakes and reserves.The accumulated amounts of various trace metals in bottom sediments and wetland plants were found in the following order of Fe ＞ Mn ＞ Zn ＞ Ni ＞ Co ＞ Cu ＞ Pb and Fe ＞ Mn ＞ Zn ＞ Ni ＞ Co respectively.The historical trace metal intake of Myriophyllum verticillatum,Hydrocharis morsus-ranae,Typha latifolia and Nymphaea alba were obtained higher than that of the toxic metal levels and these plants may be accepted as accumulators for the detected trace metals and also bioindicators in the historically polluted natural areas.  相似文献   

A rapid seismic safety assessment method for mid-rise reinforced concrete buildings     

Onur Kaplan  Yucel Guney  Ahmet Topcu  Yunus Ozcelikors 《Bulletin of Earthquake Engineering》2018,16(2):889-915

The majority of existing buildings are not safe against earthquakes in most of the developing countries. Existing building stocks should be assessed with a seismic safety assessment method before a devastating earthquake. Cheaper and quicker rapid seismic safety assessment methods can be used instead of code-based assessment methods to determine the seismic performance of existing buildings. In this study, an approach was introduced to determine the seismic performance of existing mid-rise reinforced concrete buildings with fewer parameters and process steps than code-based detailed assessment procedures. Calibration and regulation of the introduced method were conducted on the 39 collapsed buildings’ projects in 1999 Kocaeli, Turkey, earthquake. Finally, 55 existing buildings located in Eskisehir, Turkey, assessed with this calibrated method and the results were compared with the results of a code-based detailed assessment method; the results showed a very good agreement of about 83%. This study shows that the proposed method can be applied for the determination of the seismic performance of existing mid-rise reinforced concrete buildings quickly and without compromising reliability.  相似文献   

An improved input energy spectrum verified by the shake table tests     

Ahmet Güllü  Ercan Yüksel  Cem Yalçın  A. Anıl Dindar  Hasan Özkaynak  Oral Büyüköztürk 《地震工程与结构动力学》2019,48(1):27-45

Input energy is the principal component of the energy balance equation. It is beneficial to determine, through its components, how the recoverable and irrecoverable energies are distributed within the structural elements. Several equations and attenuation relations to define mass-normalized input energy spectra exist in the literature. They are mainly proposed for elastic systems subjected to far-fault EQs. There is a lack of experimental verification of these proposed spectra. In this paper, experimental assessment was performed to the existing spectra, and further improvements were accomplished. For this purpose, steel cantilever columns were tested on the shake table for two specific historical EQs coincidently having similar spectral acceleration values. Based on the experimental results, a three-part mass-normalized relative input energy spectrum was formulated including soil type, EQ (corner period, intensity, duration, spectral acceleration, and velocity), and structural behavioral characteristics (period and structural damping). The proposed input energy spectrum was experimentally calibrated and numerically validated for various EQs featuring near- and far-field types. Analytical and experimental comparisons were made between the previously developed spectrum and the newly proposed one. The validation studies and the statistical evaluations exposed that the proposed spectrum yielded better agreement with the experimental and numerical results.  相似文献   

Displacement amplification factors for steel eccentrically braced frames          下载免费PDF全文

Ahmet Kuşy𝚤lmaz  Cem Topkaya 《地震工程与结构动力学》2015,44(2):167-184

Inelastic deformation capacity of links is a factor that significantly influences design of steel eccentrically braced frames (EBFs). The link rotation angle is used to describe inelastic link deformation. The link rotation angle is generally calculated by making use of design story drifts that in turn are calculated by modifying the elastic displacements by a displacement amplification factor. This paper presents a numerical study undertaken to evaluate the displacement amplification factor given in ASCE7‐10 for EBFs and the rigid‐plastic mechanism used for calculating link rotation angles. A total of 72 EBFs were designed by considering the number of stories, the bay width, the link length to bay width ratio, and the seismic hazard level as the prime variables. All structures were analyzed using elastic and inelastic time history analyses. The results indicated that the displacement amplification factor given in ASCE7‐10 provides unconservative estimates of the story drifts. On the other hand, the rigid‐plastic mechanism provides conservative estimates of link rotations. Based on the results of the numerical study, a new set of displacement amplification factors that vary along the height of the structure and modifications to the rigid‐plastic mechanism were developed. In light of the proposed modifications, the EBFs were redesigned and analyzed using inelastic time history analysis. The results indicated that the proposed modifications provide improvements for the displacement amplification factor and link rotation angle calculation procedures. Copyright © 2014 John Wiley & Sons, Ltd.  相似文献   

Joint parameter estimation from magnetic resonance and vertical electric soundings using a multi‐objective genetic algorithm     

İrfan Akca  Thomas Günther  Mike Müller‐Petke  Ahmet T. Başokur  Ugur Yaramanci 《Geophysical Prospecting》2014,62(2):364-376

Magnetic resonance sounding (MRS) has increasingly become an important method in hydrogeophysics because it allows for estimations of essential hydraulic properties such as porosity and hydraulic conductivity. A resistivity model is required for magnetic resonance sounding modelling and inversion. Therefore, joint interpretation or inversion is favourable to reduce the ambiguities that arise in separate magnetic resonance sounding and vertical electrical sounding (VES) inversions. A new method is suggested for the joint inversion of magnetic resonance sounding and vertical electrical sounding data. A one‐dimensional blocky model with varying layer thicknesses is used for the subsurface discretization. Instead of conventional derivative‐based inversion schemes that are strongly dependent on initial models, a global multi‐objective optimization scheme (a genetic algorithm [GA] in this case) is preferred to examine a set of possible solutions in a predefined search space. Multi‐objective joint optimization avoids the domination of one objective over the other without applying a weighting scheme. The outcome is a group of non‐dominated optimal solutions referred to as the Pareto‐optimal set. Tests conducted using synthetic data show that the multi‐objective joint optimization approximates the joint model parameters within the experimental error level and illustrates the range of trade‐off solutions, which is useful for understanding the consistency and conflicts between two models and objectives. Overall, the Levenberg‐Marquardt inversion of field data measured during a survey on a North Sea island presents similar solutions. However, the multi‐objective genetic algorithm method presents an efficient method for exploring the search space by producing a set of non‐dominated solutions. Borehole data were used to provide a verification of the inversion outcomes and indicate that the suggested genetic algorithm method is complementary for derivative‐based inversions.  相似文献