In many instances hydrogeological parameters obtained by conventional methods for selected localities within an aquifer or an aquitard are not sufficient for adequate regionalization at the scale of the entire layer. Here, we demonstrate an application of the fuzzy kriging method in regionalization of hydrogeological data, in which the set of conventional, crisp values is supplemented by imprecise information subjectively estimated by an expert. It is believed that such an approach eventually may reflect the real-world conditions more closely than a traditional crisp-value approach, because the former does not impose exactness artificially on phenomena which are diffuse by their nature. Spatial interpolation was done for the thickness of one of the major aquitards (till and glaciolacustrine clay) in northwestern Germany. The dataset consists of 329 crisp values from boreholes supplemented by 172 imprecise values defined as fuzzy numbers. It is demonstrated that the reliability of regionalization was higher, compared to regionalization performed with the crisp dataset only. Fuzzy kriging was performed with FUZZEKS (Fuzzy Evaluation and Kriging System) developed at the Ecosystem Research Center at the University of Kiel. 相似文献
We investigated the metamorphic cooling history of underplated magmatic rocks at midcrustal depth. Granulites and amphibolites occur within the Jurassic magmatic belt of the Coast Range south of Antofagasta in northern Chile between 23°25' and 24°20' S. The protoliths of the metamorphic rocks are basic intrusions of Early Mesozoic age. They are part of the magmatically formed crust, and the essentially dry magmas were emplaced in an extensional regime. The granulites (clinopyroxene–orthopyroxene–plagioclase) show all stages of fabric development from magmatic to granoblastic fabrics. Pyroxene compositions were reset at temperatures around 800° C independent of the stage of textural equilibration. The granulites were partially amphibolitized at upper amphibolite facies temperatures of 600–700° C. Following cooling, a possible reheating to greenschist facies temperatures around 500° C is indicated by prograde zoning in magnetite–ilmenite pairs. Mineral assemblages are not suitable for barometry, but a conservative estimation of the garnet-in reaction at given whole-rock compositions suggests maximum pressures in the granulite facies of around 5 kbar, and similar pressures are indicated by phengite barometry for the greenschist facies. The P–T path of granulite–amphibolite metamorphism is one of slow cooling from magmatic temperatures with heterogeneous deformation. The thinning of the pre-Andean (Precambrian–Triassic) crust was apparently compensated by the magmatic underplating and this special tectonomagmatic setting caused the prolonged residence of the accreted rocks at midcrustal levels. 相似文献
It has been proposed that Victorian brown coal can be considered as a two-component structure — a lignocellulosic “host”, containing various amounts of weakly bound or entrapped “guest” material together with very small amounts of inorganic and/or mineral matter. The latter predominantly consists of wax esters and/or terpenoid material. In this paper we describe attempts to gain structural information regarding the more complex, “host” component of the coal. Our initial model compound has been humic acid that can be readily obtained from the coal by alkaline extraction. It has been found that “pure” humic acid, free from material associated with the “guest” components of the coal, can be obtained by a highly selective, low-yielding alkaline extraction. This humic acid has been studied by nmr spectroscopy and pyrolysis gas chromatography-mass spectroscopy (py-gc/ms). The products arising from py-gc/ms have been compared with those obtained from similar pyrolysis of whole coals. Alkylation of humic acids using alkyl halides in the presence of base has been successfully carried out and reactivity of the resulting materials compared with those of the parent coal and humic acid. 相似文献
The geology of the mainland and offshore of Sicily is illustrated by a few geologic sections and seismic profiles across the late Cenozoic orogenic belt of central and western Sicily and across the Sardinia Channel and Sicily Straits. This belt is the result of several tectonic events. Deformation involved mainly the sedimentary cover of the old African continental margin characterized by a broad basinal domain, flanked along its external (southern) margin by a shallow-water carbonate platform attached to Africa in the Triassic. Compressional deformation started in the more internal basinal rock assemblages overlying a thinned crust. The most important structural characteristic of the early phase of thrusting is the duplex pile forming the bulk of the chain in Central Western Sicily. The structure consists of a basal allochthon, made up of Permian to Middle Triassic layers, an intermediate duplex wedge, composed of competent Mesozoic carbonates, and a roof complex, including Upper Mesozoic-Lower Tertiary less competent rocks. Large-scale clockwise rotation of the thrusts accompanied transpressional movements in the hinterland during the Pliocene. Right oblique reverse faults modified the previous tectonic contacts between the allochthons in the hinterland zones. Contemporaneous south-directed imbrications affected the southern external areas, progressively incorporating foreland and piggyback basins. Development of the Gela Thrust System appears to be linked to the transpressional event; its accretion is also related to contemporaneous underthrusting at deeper levels of Mesozoic carbonate substratum. The older buried thrust sheets were pushed up to the surface breaching the deformed Tertiary cover of the Gela TS. Northwards in the belt post-Messinian normal growth faults opened half graben whose sedimentary fill underwent structural inversion. Alternation of extension and compression tectonics characterizes the Sicilian continental margin in the last million years. 相似文献
The HADES project (High Activity Disposal Experimental Site) aims at demonstrating the technical feasibility and the long-term safety of geological disposal of reprocessed HLW (High-Level Wastes) radioactive wastes. This disposal could be realised in the Tertiary Boom clay formation below the Mol/Dessel nuclear site. Previous studies in the 80's on the geomechanical behaviour of Boom clay, at host rock temperature (15°C), have demonstrated the mining capabilities of this clay. European partners have collaborated to increase the number of in-situ tests to be developed and operated from the Underground Research Facility (URF). Integrated large-scale experiments have been developed during the last four years, within the framework of the Commission of the European Communities (CEC) research contracts, in order to gain more insight into the thermal influence of heat-emiting wastes on the clay behaviour in the near field.
This paper summarizes the knowledge gained from the in-situ hydro-thermo-mechanical experiments realised from the URF. The objectives and main issues of the tests are described. Information regarding selection of parameters and representativeness of their measurements is discussed. Despite their different aims and designs, three hydro-thermo-mechanical experiments are compared in order to emphasize similarities in the general behaviour of the clay massif submitted to a thermal load. It is observed that its behaviour is qualitatively similar to the reaction upon a constant total stress increase. With the information now available, it is not obvious to draw conclusions with respect to the irreversibility of some phenomena.
Simple in-house analytical codes are able to simulate with a good accuracy the hydro-thermo-mechanical behaviour of clay. Nevertheless, these codes are not sufficient to describe the complexity of the phenomena that are involved in hydro-thermo-mechanical processes as pointed out by field data. In order to validate more complex models, the possibilities to improve the representativeness of the measurements are investigated. 相似文献
A difficulty in the interpretation of mechanical and thermo-mechanical tests on specimens drawn from large argillaceous formations is the strong inhomogeneity of void ratio, clay minerals and carbonates content.
In this paper a relationship is developed to link strength and the maximum preconsolidation stress to the initial void ratio and carbonate content. Compressibility is also correlated to carbonates.
Thermal strains in drained and undrained conditions for a Spanish, a belgian and an Italian natural clay are compared. In the elastic state strains are comparable, while in the plastic range thermal strains are highest for the Belgian clay, lower in the Spanish cemented clay and lowest in the Italian clay, very stiff and cemented. 相似文献
The northern part of the western Kunlun (southern margin of the Tarim basin) represents a Sinian rifted margin. To the south of this margin, the Sinian to Paleozoic Proto-Tethys Ocean formed. South-directed subduction of this ocean, beneath the continental southern Kunlun block during the Paleozoic, resulted in the collision between the northern and southern Kunlun blocks during the Devonian. The northern part of the Paleo-Tethys Ocean, located to the south of the southern Kunlun, was subducted to the north beneath the southern Kunlun during the Late Paleozoic to Early Mesozoic. This caused the formation of a subduction-accretion complex, including a sizeable accretionary wedge to the south of the southern Kunlun. A microcontinent (or oceanic plateau?), which we refer to as “Uygur terrane,” collided with the subduction complex during the Late Triassic. Both elements together represent the Kara-Kunlun. Final closure of the Paleo-Tethys Ocean took place during the Early Jurassic when the next southerly located continental block collided with the Kara-Kunlun area. From at least the Late Paleozoic to the Early Jurassic, the Tarim basin must be considered a back-arc region. The Kengxiwar lineament, which “connects” the Karakorum fault in the west and the Ruogiang-Xingxingxia/Altyn-Tagh fault zone in the east, shows signs of a polyphase strike-slip fault along which dextral and sinistral shearing occurred. 相似文献