Some remarks on the deep seismicity in the southern Tyrrhenian and its geodynamic interpretation     

Enzo Mantovani  Daniele Babbucci  Ferruccio Farsi 《Ocean Dynamics》1984,37(2):45-56

  相似文献   

Morphology and geological setting of Iseo Lake (Lombardy) through multibeam bathymetry and high-resolution seismic profiles     

Alfredo Bini  Daniele Corbari  Paolo Falletti  Mauro Fassina  Cesare R. Perotti  Andrea Piccin 《Swiss Journal of Geoscience》2007,100(1):23-40

  相似文献   

An archaeomagnetic investigation of a Roman amphorae workshop in Albinia (Italy)     

Mimi J. Hill  Philippe Lanos  Annick Chauvin  Daniele Vitali  Fanette Laubenheimer 《Geophysical Journal International》2007,169(2):471-782

  相似文献   

Geochemistry of the thermal springs and fumaroles of Basse-Terre Island,Guadeloupe, Lesser Antilles     

Tatjana Brombach  Luigi Marini  Johannes C. Hunziker 《Bulletin of Volcanology》2000,61(7):477-490

 The purpose of this work was to study jointly the volcanic-hydrothermal system of the high-risk volcano La Soufrière, in the southern part of Basse-Terre, and the geothermal area of Bouillante, on its western coast, to derive an all-embracing and coherent conceptual geochemical model that provides the necessary basis for adequate volcanic surveillance and further geothermal exploration. The active andesitic dome of La Soufrière has erupted eight times since 1660, most recently in 1976–1977. All these historic eruptions have been phreatic. High-salinity, Na–Cl geothermal liquids circulate in the Bouillante geothermal reservoir, at temperatures close to 250  °C. These Na–Cl solutions rise toward the surface, undergo boiling and mixing with groundwater and/or seawater, and feed most Na–Cl thermal springs in the central Bouillante area. The Na–Cl thermal springs are surrounded by Na–HCO₃ thermal springs and by the Na–Cl thermal spring of Anse à la Barque (a groundwater slightly mixed with seawater), which are all heated through conductive transfer. The two main fumarolic fields of La Soufrière area discharge vapors formed through boiling of hydrothermal aqueous solutions at temperatures of 190–215  °C below the "Ty" fault area and close to 260  °C below the dome summit. The boiling liquid producing the vapors of the Ty fault area has δD and δ¹⁸O values relatively similar to those of the Na–Cl liquids of the Bouillante geothermal reservoir, whereas the liquid originating the vapors of the summit fumaroles is strongly enriched in ¹⁸O, due to input of magmatic fluids from below. This process is also responsible for the paucity of CH₄ in the fumaroles. The thermal features around La Soufrière dome include: (a) Ca–SO₄ springs, produced through absorption of hydrothermal vapors in shallow groundwaters; (b) conductively heated, Ca–Na–HCO₃ springs; and (c) two Ca–Na–Cl springs produced through mixing of shallow Ca–SO₄ waters and deep Na–Cl hydrothermal liquids. The geographical distribution of the different thermal features of La Soufrière area indicates the presence of: (a) a central zone dominated by the ascent of steam, which either discharges at the surface in the fumarolic fields or is absorbed in shallow groundwaters; and (b) an outer zone, where the shallow groundwaters are heated through conduction or addition of Na–Cl liquids coming from hydrothermal aquifer(s). Received: 9 November 1998 / Accepted: 15 July 1999  相似文献   

Sensitivity analysis of seismic hazard for Western Liguria (North Western Italy): A first attempt towards the understanding and quantification of hazard uncertainty     

Simone Barani  Daniele Spallarossa  Paolo Bazzurro  Claudio Eva   《Tectonophysics》2007,435(1-4):13-35

The use of logic trees in probabilistic seismic hazard analyses often involves a large number of branches that reflect the uncertainty in the selection of different models and in the selection of the parameter values of each model. The sensitivity analysis, as proposed by Rabinowitz and Steinberg [Rabinowitz, N., Steinberg, D.M., 1991. Seismic hazard sensitivity analysis: a multi-parameter approach. Bull. Seismol. Soc. Am. 81, 796–817], is an efficient tool that allows the construction of logic trees focusing attention on the parameters that have greater impact on the hazard.In this paper the sensitivity analysis is performed in order to identify the parameters that have the largest influence on the Western Liguria (North Western Italy) seismic hazard. The analysis is conducted for six strategic sites following the multi-parameter approach developed by Rabinowitz and Steinberg [Rabinowitz, N., Steinberg, D.M., 1991. Seismic hazard sensitivity analysis: a multi-parameter approach. Bull. Seismol. Soc. Am. 81, 796–817] and accounts for both mean hazard values and hazard values corresponding to different percentiles (e.g., 16%-ile and 84%-ile). The results are assessed in terms of the expected PGA with a 10% probability of exceedance in 50 years for rock conditions and account for both the contribution from specific source zones using the Cornell approach [Cornell, C.A., 1968. Engineering seismic risk analysis. Bull. Seismol. Soc. Am. 58, 1583–1606] and the spatially smoothed seismicity [Frankel, A., 1995. Mapping seismic hazard in the Central and Eastern United States. Seismol. Res. Lett. 66, 8–21]. The influence of different procedures for calculating seismic hazard, seismic catalogues (epicentral parameters), source zone models, frequency–magnitude parameters, maximum earthquake magnitude values and attenuation relationships is considered. As a result, the sensitivity analysis allows us to identify the parameters with higher influence on the hazard. Only these parameters should be subjected to careful discussion or further research in order to reduce the uncertainty in the hazard while those with little or no effect can be excluded from subsequent logic-tree-based seismic hazard analyses.  相似文献   

Metamorphic veins with kyanite, zoisite and quartz in the Zhu-Jia-Chong eclogite, Dabie Shan, China   总被引：13，自引：0，他引：13  

Daniele Castelli  Franco Rolfo  Roberto Compagnoni  & Shutong Xu 《Island Arc》1998,7(1-2):159-173

  相似文献   

Detection of Hg pollution by stream sediment geochemistry in the Bisagno valley (Genoa, Italy)     

L. Marini  G. Ottonello  M. Canepa  F. Cipolli  M. Vetuschi Zuccolini 《Environmental Geology》2000,40(1-2):234-242

 Systematic stream sediment investigation in a periurban area surrounding Genoa (Italy) revealed the existence of a significant mercury anomaly localized on the main (3rd rank) bed of the Bisagno river. Statistical multivariate analysis of elemental abundances points out the anthropic nature of this contamination. Because of the well-known bioaccumulation of Hg in contaminated media, attention must be focused on the risks associated with the discovered pollution. Received: 30 November 1999 · Accepted: 22 March 2000  相似文献   

Optimal two-impulse rendezvous using constrained multiple-revolution Lambert solutions     

Gang Zhang  Di Zhou  Daniele Mortari 《Celestial Mechanics and Dynamical Astronomy》2011,110(4):305-317

A solution to the fixed-time minimum-fuel two-impulse rendezvous problem for the general non-coplanar elliptical orbits is provided. The optimal transfer orbit is obtained using the constrained multiple-revolution Lambert solution. Constraints consist of lower bound for perigee altitude and upper bound for apogee altitude. The optimal time-free two-impulse transfer problem between two fixed endpoints implies finding the roots of an eighth order polynomial, which is done using a numerical iterative technique. The set of feasible solutions is determined by using the constraints conditions to solve for the short-path and long-path orbits semimajor axis ranges. Then, by comparing the optimal time-free solution with the feasible solutions, the optimal semimajor axis for the two fixed-endpoints transfer is identified. Based on the proposed solution procedure for the optimal two fixed-endpoints transfer, a contour of the minimum cost for different initial and final coasting parameters is obtained. Finally, a numerical optimization algorithm (e.g., evolutionary algorithm) can be used to solve this global minimization problem. A numerical example is provided to show how to apply the proposed technique.  相似文献   

POLARIX: a pathfinder mission of X-ray polarimetry     

Enrico Costa  Ronaldo Bellazzini  Gianpiero Tagliaferri  Giorgio Matt  Andrea Argan  Primo Attinà  Luca Baldini  Stefano Basso  Alessandro Brez  Oberto Citterio  Sergio Di Cosimo  Vincenzo Cotroneo  Sergio Fabiani  Marco Feroci  Antonella Ferri  Luca Latronico  Francesco Lazzarotto  Massimo Minuti  Ennio Morelli  Fabio Muleri  Lucio Nicolini  Giovanni Pareschi  Giuseppe Di Persio  Michele Pinchera  Massimiliano Razzano  Luigia Reboa  Alda Rubini  Antonio Maria Salonico  Carmelo Sgro’  Paolo Soffitta  Gloria Spandre  Daniele Spiga  Alessio Trois 《Experimental Astronomy》2010,28(2-3):137-183

Since the birth of X-ray astronomy, spectral, spatial and timing observation improved dramatically, procuring a wealth of information on the majority of the classes of the celestial sources. Polarimetry, instead, remained basically unprobed. X-ray polarimetry promises to provide additional information procuring two new observable quantities, the degree and the angle of polarization. Polarization from celestial X-ray sources may derive from emission mechanisms themselves such as cyclotron, synchrotron and non-thermal bremsstrahlung, from scattering in aspheric accreting plasmas, such as disks, blobs and columns and from the presence of extreme magnetic field by means of vacuum polarization and birefringence. Matter in strong gravity fields and Quantum Gravity effects can be studied by X-ray polarimetry, too. POLARIX is a mission dedicated to X-ray polarimetry. It exploits the polarimetric response of a Gas Pixel Detector, combined with position sensitivity, that, at the focus of a telescope, results in a huge increase of sensitivity. The heart of the detector is an Application-Specific Integrated Circuit (ASIC) chip with 105,600 pixels each one containing a full complete electronic chain to image the track produced by the photoelectron. Three Gas Pixel Detectors are coupled with three X-ray optics which are the heritage of JET-X mission. A filter wheel hosting calibration sources unpolarized and polarized is dedicated to each detector for periodic on-ground and in-flight calibration. POLARIX will measure time resolved X-ray polarization with an angular resolution of about 20 arcsec in a field of view of 15 × 15 arcmin and with an energy resolution of 20% at 6 keV. The Minimum Detectable Polarization is 12% for a source having a flux of 1 mCrab and 10⁵ s of observing time. The satellite will be placed in an equatorial orbit of 505 km of altitude by a Vega launcher. The telemetry down-link station will be Malindi. The pointing of POLARIX satellite will be gyroless and it will perform a double pointing during the earth occultation of one source, so maximizing the scientific return. POLARIX data are for 75% open to the community while 25% + SVP (Science Verification Phase, 1 month of operation) is dedicated to a core program activity open to the contribution of associated scientists. The planned duration of the mission is one year plus three months of commissioning and SVP, suitable to perform most of the basic science within the reach of this instrument. A nice to have idea is to use the same existing mandrels to build two additional telescopes of iridium with carbon coating plus two more detectors. The effective area in this case would be almost doubled.  相似文献   

Quality assessment of the Italian Landslide Inventory using GIS processing   总被引：4，自引：1，他引：3  

Alessandro Trigila  Carla Iadanza  Daniele Spizzichino 《Landslides》2010,7(4):455-470

Landslides constitute one of the most important natural hazards in Italy as they are widespread and result in considerable damage and fatalities every year. The Italian Landslide Inventory (IFFI) Project was launched in 1999 with the aim of identifying and mapping landslides over the entire Italian territory. The inventory currently holds over 480,000 landslides and has been available by means of Web services since 2005. The aim of this study is to define quality indices for evaluation of the homogeneity and completeness of the IFFI database. In order to estimate the completeness of the landslide attribute information, a heuristic approach has been used to assign weighting values to significant parameters selected from the landslide data sheet. The completeness and homogeneity of the landslide mapping has been evaluated by means of three different methods: an area-frequency distribution analysis; the proximity of the landslides surveyed to urban areas; variation of the landslide index within the same lithology. The quality indices have allowed identification of areas with a high level of completeness and critical areas in which the data collected have been underestimated or are not very accurate. The quality assessment of collected and stored data is essential in order to use the IFFI database for definition and implementation of landslide susceptibility models and for land use planning and management.  相似文献