Upper Cretaceous marine‐continental transition (Leonese Area,NW Spain) defined from integrated outcrop and seismic stratigraphy     

Antonio Herrero‐Hernndez  Fernando Gmez‐Fernndez  Francisco Javier Lpez‐Moro 《Geological Journal》2015,50(1):39-55

The Upper Cretaceous succession of the Leonese Area (NW Spain) comprises mixed clastic and carbonate sediments. This succession is divided into two lithostratigraphic units, the Voznuevo Member and the Boñar Formation, which represent fluvial, shoreface, intertidal, subtidal and open‐shelf sedimentary environments. Regional seismic interpretation and sequence stratigraphic analysis have allowed the study of lateral and vertical changes in the sedimentary record and the definition of third‐order levels of stratigraphic cyclicity. On the basis of these data, the succession can be divided into two second‐order depositional sequences (DS‐1 and DS‐2), incorporating three system tracts in a lowstand to transgressive to highstand system tract succession (LST–TST–HST). These sequences are composed of fluvial systems at the base with palaeocurrents that flowed westward and south‐westward. The upper part of DS‐1 (Late Albian–Middle Turonian) shows evidence of intertidal to subtidal and offshore deposits. DS‐2 (Late Turonian–Campanian) comprises intertidal to subtidal, tidal flat, shallow marine and lacustrine deposits and interbedded fluvial deposits. Two regressive–transgressive cycles occurred in the area related to eustatic controls. The evolution of the basin can be explained by base‐level changes and associated shifts in depositional trends of successive retrogradational episodes. By using isobath and isopach maps, the main palaeogeographic features of DS‐1 and DS‐2 were constrained, namely coastline positions, the existence and orientation of corridors through which fluvial networks were channelled and the location of the main depocentres of the basin. Sedimentation on the Upper Cretaceous marine platform was mainly controlled by (i) oscillations of sea level and (ii) the orientation of Mesozoic faults, which induced sedimentation along depocentres. Copyright © 2013 John Wiley & Sons, Ltd.  相似文献   

Multiple overpressure systems and their relationship with hydrocarbon accumulation in the Qikou Depression of the Bohai Bay Basin,China     

Xue‐Bin Du  Xi‐Nong Xie  Yong‐Chao Lu  Liang Zhang  Wei Peng  Yun‐Peng Li 《Geological Journal》2015,50(4):465-476

Pressure measurements using drill stem tests and estimates from log data calculation indicate that three vertically stacked regional pressure compartments exist in the Qikou Depression of Bohai Bay Basin, N. China. The compartments comprise hydrostatic, upper weak, and lower overpressure systems. Laterally, overpressure (pressure coefficient > 1.2) occurs in the deeper areas and weakens gradually from the centre to the margin of the depression. The accumulation of oil and gas exhibits the interesting characteristics of oil‐bearing layers above gas‐bearing layers in the Qikou Depression. The pattern can be accounted for by the evolution of overpressure system, the maturity process of the source rock and the main fault activity. In the late Dongying Formation (Ed, 30 Ma), the lower overpressure system began to form shape, and the hydrocarbon sources generated a large volume of oil. However, because there was no migration pathway, the oil only accumulated in the original strata. In the late Guantao Formation (Ng, 12 Ma), the gas was generated, the upper overpressure system formed gradually, and the activity of the main fault gradually increased. Then, the overpressure pushed the early gathered oil to flow from the lower overpressure system into the upper overpressure system. Afterwards, the activity of the main fault decreased again and remains weak until now. Thus, later generated natural gas cannot keep migrating along the main fault and can only accumulate in the lower overpressure system. Copyright © 2014 John Wiley & Sons, Ltd.  相似文献   

Geochemical Characterization of Bolivian Formative Earthen Architecture by Wavelength‐Dispersive X‐ray Fluorescence     

Melissa A. Goodman‐Elgar  Nichole S. Bettencourt  Richard Conrey 《Geoarchaeology》2015,30(1):32-58

In this study, we employ wavelength‐dispersive X‐ray fluorescence (WDXRF) to characterize construction materials from Formative civic architecture (1000 B.C.E.–C.E. 400), ethnographic mudbricks, and off‐site controls from the Taraco Peninsula, Bolivia. The preparation of earthen construction materials for civic buildings can shed light on aspects of community development such as labor organization, resource management, and architectural technologies. We apply geochemical results to reconstructing how public buildings were made as communities moved toward socio‐political complexity in this region. However, there are few geochemical studies in the Andes, and little prior scientific analysis of earthen architecture. We therefore tested the efficacy of WDXRF for this region, and developed control materials. Our archaeological samples were selected from two Formative villages, Chiripa and Kala Uyuni. In this study, we performed WDXRF analyses on 63 archaeological and control samples including archaeological floors, walling, plasters, and mortars, as well as contemporary ethnographic walling and topsoils. Elemental signatures for 28 elements clearly distinguished the archaeological flooring, walling, plaster, and mortars from ethnographic and off‐site controls. More subtle variations were detected that distinguish study sites and the different material types. Laboratory‐calibrated multi‐element XRF effectively supports efforts to reconstruct the pathways to social complexity in the Titicaca Basin.  相似文献   

Geoarchaeological Investigations in Mesoamerica Move into the 21st Century: A Review     

Nicholas P. Dunning  Carmen McCane  Tyler Swinney  Matthew Purtill  Jani Sparks  Ashley Mann  Jon‐Paul McCool  Chantal Ivenso 《Geoarchaeology》2015,30(3):167-199

Over the past thirty years, geoarchaeology has moved from the fringe to mainstream status within Mesoamerican archaeological investigations. This review focuses on works published since the year 2000. Five themes are identified as central to recent studies: (1) the correlation of environmental change and cultural history; (2) anthropogenic environmental impacts; (3) ancient land cover, land use, and diet; (4) archaeological prospection; and (5) provenance studies. These themes are often interwoven in the application of complex systems approaches that allow scientists to more accurately model the intricacies of ancient human–environment interactions.  相似文献   

Variability in bedform morphology and kinematics with transport stage          下载免费PDF全文

Jeremy G. Venditti  C.‐Y. Martin Lin  Moslem Kazemi 《Sedimentology》2016,63(4):1017-1040

Bedform geometry is widely recognized to be a function of transport stage. Bedform aspect ratio (height/length) increases with transport stage, reaches a maximum, then decreases as bedforms washout to a plane bed. Bedform migration rates are also linked to bedform geometry, in so far as smaller bedforms in coarser sediment tend to migrate faster than larger bedforms in finer sediment. However, how bedform morphology (height, length and shape) and kinematics (translation and deformation) change with transport stage and suspension have not been examined. A series of experiments is presented where initial flow depth and grain size were held constant and the transport stage was varied to produce bedload dominated, mixed‐load dominated and suspended‐load dominated conditions. The results show that the commonly observed pattern in bedform aspect ratio occurs because bedform height increases then decreases with transport stage, against a continuously increasing bedform length. Bedform size variability increased with transport stage, leading to less uniform bedform fields at higher transport stage. Total translation‐related and deformation‐related sediment fluxes all increased with transport stage. However, the relative contribution to the total flux changed. At the bedload dominated stage, translation‐related and deformation‐related flux contributed equally to the total flux. As the transport stage increased, the fraction of the total load contributed by translation increased and the fraction contributed by deformation declined because the bedforms got bigger and moved faster. At the suspended‐load dominated transport stage, the deformation flux increased and the translation flux decreased as a fraction of the total load, approaching one and zero, respectively, as bedforms washed out to a plane bed.  相似文献   

Significance of shallow core transects for reef models and sea‐level curves,Heron Reef,Great Barrier Reef          下载免费PDF全文

Gregory E. Webb  Luke D. Nothdurft  Jian‐Xin Zhao  Bradley Opdyke  Gilbert Price 《Sedimentology》2016,63(6):1396-1424

A sequence of shallow reef cores from Heron Reef, Great Barrier Reef, provides new insights into Holocene reef growth models. Isochron analysis of a leeward core transect suggests that the north‐western end of Heron Reef reached current sea‐level by ca 6·5 kyr bp and then prograded leeward at a rate of ca 19·6 m/kyr between 5·1 kyr and 4·1 kyr bp (pre‐1950) to the present reef margin. A single short core on the opposing margin of the reef is consistent with greater and more recent progradation there. Further to the east, one windward core reached modern sea‐level by ca 6·3 kyr bp , suggesting near ‘keep‐up’ behaviour at that location, but the opposing leeward margin behind the lagoon reached sea‐level much more recently. Hence, Heron Reef exhibited significantly different reef growth behaviour on different parts of the same margin. Mean reef accretion rates calculated from within 20 m of one another in the leeward core transect varied between ca 2·9 m and 4·7 m/kyr depending on relative position in the prograding wedge. These cores serve as a warning regarding the use of isolated cores to inform reef growth rates because apparent aggradation at any given location on a reef varies depending on its location relative to a prograding margin. Only transects of closely spaced cores can document reef behaviour adequately so as to inform reef growth models and sea‐level curves. The cores also emphasize potential problems in U‐series dates for corals within a shallow (ca 1·5 m) zone beneath the reef flat. Apparent age inversions restricted to that active diagenetic zone may reflect remobilization and concentration of Th in irregularly distributed microbialites or biofilms that were missed during sample vetting. Importantly, the Th‐containing contaminant causes ages to appear too old, rather than too young, as would be expected from younger cement.  相似文献   

Development of large‐scale seismites in Upper Cretaceous fluvial sandstones in a fault‐proximal setting          下载免费PDF全文

Michael C. Wizevich  Edward L. Simpson  Hannah L. Hilbert‐Wolf  Sarah E. Tindall 《Sedimentology》2016,63(6):1719-1738

Large‐scale soft‐sediment deformation structures occur within fluvial sandstone bodies of the Upper Cretaceous Wahweap Formation in the Kaiparowits basin, southern Utah, USA. These structures represent an exceptional example of metre‐scale fault‐proximal, seismogenic load structures in nearly homogenous sandstones. The load structures consist of two types: large‐scale load casts and wedge‐shaped load structures. Large‐scale load casts penetrate up to 4·5 m into the underlying sandstone bed. Wedge‐shaped load structures include metre‐scale, parallel, sub‐vertical features and decimetre‐scale features along the periphery of the large‐scale load casts or other wedge‐shaped load structures. Wedge‐shaped load structures contain well‐developed, medial cataclastic shear deformation bands. All load structures contain pervasive well‐defined millimetre‐thick to centimetre‐thick internal laminae, oriented parallel to the outside form of the load structures and asymptotic to deformation bands. Both types of load structures formed because of an inverted density profile, earthquake‐triggered liquefaction and growth of irregularities (a Rayleigh–Taylor instability) on the sandstone–sandstone erosional contact. The internal laminae and deformation bands formed during deformation and clearly demonstrate polyphase deformation, recording a transition from liquefied to hydroplastic to brittle modes of deformation. Decimetre‐scale wedge‐shaped load structures on the edge of the large‐scale load casts probably formed towards the end of a seismic event after the sediment dewatered and increased the frictional contact of grains enough to impart strength to the sands. Metre‐scale wedge‐shaped load structures were created as the tips of downward foundering sediments were driven into fractures, which widened incrementally with seismic pulsation. With each widening of the fracture, gravity and a suction effect would draw additional sediment into the fracture. Superimposed laminae indicate a secondary syndeformational origin for internal laminae, probably by flow‐generated shearing and vibrofluidization mechanisms. Large‐scale and wedge‐shaped load structures, polyphase deformation and secondary laminae may characterize soft‐sediment deformation in certain fault‐proximal settings.  相似文献   

Progradational and backstepping shoreface deposits in the Ladinian to Early Norian Snadd Formation of the Barents Sea          下载免费PDF全文

Tore G. Klausen  Alf Ryseth  William Helland‐Hansen  Helge K. Gjelberg 《Sedimentology》2016,63(4):893-916

Shoreface sandstone deposits within the Early Carnian part of the Snadd Formation of the Norwegian Barents Sea can be traced for hundreds of kilometres in the depositional strike direction and for tens of kilometres in the depositional‐dip direction. This study uses three‐dimensional seismic attribute mapping and two‐dimensional regional seismic profiles to visualize the seismic facies of these shoreface deposits and to map their internal stratigraphic architecture at a regional scale. The shoreface deposits are generally elongate but show variable width from north‐east to south‐west, which corresponds to a sediment source in the northern part of the basin and a southward decrease in longshore sediment transport. The Snadd Formation presents an example of how large‐scale progradational shoreface deposits develop. The linear nature of its shoreface deposits contrasts with more irregular, cuspate wave‐dominated deltaic shorelines that contain river outlets, and instead implies longshore drift as the main sediment source. In map view, discrete sets of linear features bounded by truncation surfaces scale directly to beach ridge sets in modern counterparts. The shoreface deposits studied here are characteristic in terms of scale and basin‐wide continuity, and offer insight into the contrast between shallow marine deposition under stable Triassic Greenhouse and fluctuating Holocene Icehouse climates. Findings presented herein are also important for hydrocarbon exploration in the Barents Sea, because they describe a hitherto poorly understood reservoir play in the Triassic interval, wherein the most prominent reservoir plays have so far been considered to be found in channelized deposits in net‐progradational delta‐plain strata that form the topsets to shelf‐edge clinoforms. The documented presence of widespread wave‐dominated shoreface deposits also has implications for how the relative importance of different sedimentary processes is considered within the basin during this period.  相似文献   

Iron isotopic systematics of UHP eclogites respond to oxidizing fluid during exhumation   总被引：1，自引：0，他引：1       下载免费PDF全文

D.‐Y. Li  Y. L. Xiao  W.‐Y. Li  X. Zhu  H. M. Williams  Y.‐L. Li 《Journal of Metamorphic Geology》2016,34(9):987-997

The iron stable isotope compositions (δ⁵⁶Fe) and iron valence states of ultrahigh‐pressure eclogites from Bixiling in the Dabie orogen belt, China, were measured to trace the changes of geochemical conditions during vertical transportation of earth materials, for example, oxygen fugacity. The bulk Fe³⁺/ΣFe ratios of retrograde eclogites, determined by Mössbauer spectroscopy, are consistently higher than those of fresh eclogites, suggesting oxidation during retrograde metamorphism and fluid infiltration. The studied eclogites (five samples) display limited mid‐ocean ridge basalts (MORB)‐like (~0.10‰) δ⁵⁶Fe values, which are indistinguishable from their protoliths, that is, gabbro cumulates formed through differentiation of mantle‐derived basaltic magma. This suggests that Fe isotope fractionation during continental subduction is limited. Garnet separates display limited δ⁵⁶Fe variation ranging from ?0.08 ± 0.07 ‰ to 0.02 ± 0.07‰, whereas coexisting omphacite displays a large variation of δ⁵⁶Fe values from 0.15 ± 0.07‰ to 0.47 ± 0.07‰. Omphacite also has highly variable Fe³⁺/ΣFe ratios from 0.367 ± 0.025 to 0.598 ± 0.024, indicating modification after peak metamorphism. Omphacite from retrograde eclogites has elevated Fe³⁺/ΣFe ratios (0.54–0.60) compared to that from fresh eclogites (~0.37), whereas garnet displays a narrow range of ferric iron content with Fe³⁺/ΣFe ratios from 0.039 ± 0.013 to 0.065 ± 0.022. The homogenous δ⁵⁶Fe values and Fe³⁺/ΣFe ratios of garnet suggest that it survived the retrograde metamorphism and preserved its Fe‐isotopic features and ferric contents of peak metamorphism. Because of similar diffusion rates of Fe and Mg in garnet and omphacite, and constant Δ²⁶Mg_{omphacite‐garnet} values (1.14 ± 0.04‰), equilibrium iron isotope fractionation between garnet and omphacite was probably achieved during peak metamorphism. Elevated Fe³⁺/ΣFe ratios of omphacite from retrograde eclogites and variant Δ⁵⁶Fe_{omphacite‐garnet} values of the studied eclogites (0.13 ± 0.10‰ to 0.48 ± 0.10‰) indicate that oxidized geofluid infiltration resulted in the elevation of δ⁵⁶Fe values of omphacite during retrograde metamorphism.  相似文献   

Modeling Urban Land Use Changes Using Support Vector Machines          下载免费PDF全文

Mileva Samardžić‐Petrović  Suzana Dragićević  Miloš Kovačević  Branislav Bajat 《Transactions in GIS》2016,20(5):718-734

Support Vector Machines (SVM) is a machine learning (ML) algorithm commonly applied to the classification of remotely sensing data and more recently for modeling land use changes. However, in most geospatial applications the current literature does not elaborate on specifications of the SVM method with respect to data sampling, attribute selection and optimal parameters choices. Therefore the main objective of this study is to present and investigate the SVM technique for modeling urban land use change. The SVM model building procedure is presented together with the detailed evaluation of the output results with respect to the choice of datasets, attributes and the change of SVM parameters. Geospatial datasets containing nine land use classes and spatial attributes for the Municipality of Zemun, Republic of Serbia were used for years 2001, 2003, 2007 and 2011. The Correlation‐based Feature Subset method, kappa coefficient, Area Under Receiver Operating Characteristic Curve (AUC) and kappa simulation were used to perform the model evaluation and compare the model outputs with the real land use datasets. The obtained results indicate that the SVM‐based models perform better when implementing balanced data sampling, reduced data sets to informative subsets of attributes and properly identify the optimal learning parameters.  相似文献