首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 390 毫秒
1.
The Miocene to Modern Baram Delta Province is a highly efficient source to sink system that has accumulated 9 to 12 km of coastal–deltaic to shelf sediments over the past 15 Myr. Facies analysis based on ca 1 km of total vertical outcrop stratigraphy, combined with subsurface geology and sedimentary processes in the present‐day Baram Delta Province, suggests a ‘storm‐flood’ depositional model comprising two distinct periods: (i) fair‐weather periods are dominated by alongshore sediment reworking and coastal sand accumulation; and (ii) monsoon‐driven storm periods are characterized by increased wave‐energy and offshore‐directed downwelling storm flow that occur simultaneously with peak fluvial discharge caused by storm precipitation (‘storm‐floods’). The modern equivalent environment has the following characteristics: (i) humid‐tropical monsoonal climate; (ii) narrow (ca <100 km) and steep (ca 1°), densely vegetated, coastal plain; (iii) deep tropical weathering of a mudstone‐dominated hinterland; (iv) multiple independent, small to moderate‐sized (102 to 105 km2) drainage basins; (v) predominance of river‐mouth bypassing; and (vi) supply‐dominated shelf. The ancient, proximal part of this system (the onshore Belait Formation) is dominated by strongly cyclical sandier‐upward successions (metre to decametre‐scale) comprising (from bottom to top): (i) finely laminated mudstone with millimetre‐scale silty laminae; (ii) heterolithic sandstone–mudstone alternations (centimetre to metre‐scale); and (iii) sharp‐based, swaley cross‐stratified sandstone beds and bedsets (metre to decimetre‐scale). Gutter casts (decimetre to metre‐scale) are widespread, they are filled with swaley cross‐stratified sandstone and their long axes are oriented perpendicular to the palaeo‐shoreline. The gutter casts and other associated waning‐flow event beds suggest that erosion and deposition was controlled by high‐energy, offshore‐directed, oscillatory‐dominated, sediment‐laden combined flows within a shoreface to delta front setting. The presence of multiple river mouths and exceptionally high rates of accommodation creation (characteristic of the Neogene to Recent Baram Delta Province; up to 3000 m Ma−1), in a ‘storm‐flood’‐dominated environment, resulted in a highly efficient and effective offshore‐directed sediment transport system.  相似文献   

2.
《Sedimentology》2018,65(3):809-841
Degradation of basin‐margin clinothems around the shelf‐edge rollover zone may lead to the generation of conduits through which gravity flows transport sediment downslope. Many studies from seismic‐reflection data sets show these features, but they lack small‐scale (centimetre to metre) sedimentary and stratigraphic observations on process interactions. Exhumed basin‐margin clinothems in the Tanqua depocentre (Karoo Basin) provide seismic‐reflection‐scale geometries and internal details of architecture with depositional dip and strike control. At the Geelhoek locality, clinothem parasequences comprise siltstone‐rich offshore deposits overlain by heterolithic prodelta facies and sandstone‐dominated deformed mouth bars. Three of these parasequences are truncated by a steep (6 to 22°), 100 m deep and 1·5 km wide asymmetrical composite erosion surface that delineates a shelf‐incised canyon. The fill, from base to top comprises: (i) thick‐bedded sandstone with intrabasinal clasts and multiple erosion surfaces; (ii) scour‐based interbedded sandstone and siltstone with tractional structures; and (iii) inverse‐graded to normal‐graded siltstone beds. An overlying 55 m thick coarsening‐upward parasequence fills the upper section of the canyon and extends across its interfluves. Younger parasequences display progressively shallower gradients during progradation and healing of the local accommodation. The incision surface resulted from initial oversteepening and high sediment supply triggering deformation and collapse at the shelf edge, enhanced by a relative sea‐level fall that did not result in subaerial exposure of the shelf edge. Previous work identified an underlying highly incised, sandstone‐rich shelf‐edge rollover zone across‐margin strike, suggesting that there was migration in the zone of shelf edge to upper‐slope incision over time. This study provides an unusual example of clinothem degradation and readjustment with three‐dimensional control in an exhumed basin‐margin succession. The work demonstrates that large‐scale erosion surfaces can develop and migrate due to a combination of factors at the shelf‐edge rollover zone and proposes additional criteria to predict clinothem incision and differential sediment bypass in consistently progradational systems.  相似文献   

3.
Abstract Spectacular sedimentary structures recently found in the Molasse Basin (Oligocene–Miocene) in southern Germany were produced by soft‐sediment deformation under highly unusual conditions. These large, apparently wedge‐like structures –‘loading fractures’– cut down into beds of marl and are filled with coarse sand and intraclasts of shale. Wrapping the sides of the structures is a thin, continuous bed of layered dark claystone – the ‘DCB’. The upper and lower layers of this bed are an organic‐rich clay; the middle layer is a laminated quartzite. The precursor of the DCB was a lacustrine gyttja rich in diatom frustules. It was supersaturated in silica as it was buried. Subsequent diffusion of oxygen into this gyttja at a burial depth of only a few metres resulted in the formation of Liesegang laminae of quartz. These laminae grew and amalgamated, forming the layer of laminated quartzite. The sediments overlying the DCB were eventually removed by erosion, probably in a high‐energy marine environment. This erosion cut down to the DCB but was unable to penetrate it. The DCB remained exposed on the sea floor until a sudden depositional event occurred – the deposition of a 2·5 metre thick bed of coarse sand with shale intraclasts. Although the DCB had been able to resist the submarine erosion, it could not support the load of this new bed. The quartzite layer in it therefore fractured, transferring that load down onto the underlying, still‐unconsolidated marl. The intraclast‐rich sands were forced down into this marl, carrying ahead of them the partly broken remains of the DCB.  相似文献   

4.
杨剑萍  聂玲玲  杨君 《沉积学报》2008,26(6):967-974
在区域构造背景研究和岩心观察的基础上,在柴达木盆地西南缘新近纪地层中识别出与地震沉积有关的软沉积物变形构造。软沉积物变形构造包括液化砂岩脉、泄水构造、重荷模、火焰构造、震积砂枕、砂球构造、枕状层、层内错断、地裂缝、串珠状构造、震褶层、混合层及地震角砾状构造等。液化砂岩脉有喉道状、脉络状、飘带状、尖突状及“V”字形五种,主要是由振动流体化作用、振动液化挤压作用和振动拉张裂缝充填作用形成的;重荷模、火焰构造、枕状构造、球状构造是受地震颤动在砂、泥岩界面上由于砂层下沉、泥层上穿形成的;地裂缝、层内错断、震褶层是地震颤动直接引起的断裂、错断和褶皱;枕状层是地震振动引起的砂层脱水、下沉、变形形成的;混合层构造的完整性取决于地震强度和地震持续时间;地震角砾状构造是由地震振动使原始沉积层断裂形成的自碎屑角砾、脆性角砾和塑性角砾组成。该成果从沉积学角度证明了新近纪是昆仑山造山带北侧断裂活动较强烈时期,也为柴达木盆地新生代构造演化研究提供了依据。地震作用极大地提高了储层的渗透率,改善了油气储层的储集物性。  相似文献   

5.
During the Late Tortonian, platform‐margin‐prograding clinoforms developed at the south‐western margin of the Guadix Basin. Large‐scale wedge‐shaped deposits here comprise 26 rhythms of mixed carbonate–siliciclastic bedset packages and marl beds. These sediments were deposited on a shallow‐water, temperate‐carbonate distally steepened ramp. A downslope‐migrating sandwave field developed in this ramp, with sandwaves moving progressively down the ramp to the ramp‐slope, where they destabilized, folded and occasionally collapsed. Downslope sandwave migration was induced by currents flowing basinwards. During the Late Tortonian, the Guadix Basin was open north to the Atlantic Ocean via the Dehesas de Guadix Strait and connected east to the Mediterranean Sea through the Almanzora Corridor. According to the proposed current circulation model for the Guadix Basin for this time, surface marine currents from the Atlantic entered the basin from the northern seaway. These currents moved counter‐clockwise and shifted the sediment on the ramp, forming sandwaves that migrated downslope. The development of platform‐margin prograding clinoforms by the basinward sediment‐transport mechanisms inferred here is known relatively poorly in the ancient sedimentary record. Moreover, these wedge‐shaped geometries are similar to those found in some shelves in the Western Mediterranean Sea and could represent an outcrop analogue to (sub)‐recent, platform‐margin clinoforms revealed by high‐resolution seismic studies.  相似文献   

6.
Intervals of soft‐sediment deformation features, including vertical fluid escape and load structures, are common and well‐exposed in Permian lower slope deposits of the Tanqua Depocentre, Karoo Basin. The structures mainly comprise elongated flames and load structures associated with ruptured sandstones and structureless siltstones, observed over a range of scales. The presence of an upper structureless siltstone layer linked to the flames, interpreted as a product of the debouching of fine‐grained material transported through the flame onto the palaeo‐seabed, together with the drag and upward folding of lower sandstone layers is evidence that the flames were formed in situ by upward movement of sediment‐rich fluids. Flames are oriented parallel to the deep‐water palaeoslope in lateral splay deposits between two major slope channel complexes. Statistical correlation and regression analyses of 180 flame structures from seven stratigraphic intervals suggest a common mechanism for the deformation and indicate the importance of fluidization as a deformation mechanism. Importantly, deformation occurred in an instantaneous and synchronous manner. Liquefaction and fluidization were triggered by incremental movement of sediment over steeper local gradients that were generated by deposition of a lateral splay on an inherited local north‐west‐facing slope. Seismic activity is not invoked as a trigger mechanism because of the restricted spatial occurrence of these features and the lack of indications of earthquakes during the time of deposition of the deep‐water succession. The driving mechanisms that resulted in the final configuration of the soft‐sediment deformation structures involved a combination of vertical shear stress caused by fluidization, development of an inverse density gradient and a downslope component of force associated with the local slope. Ground‐penetrating radar profiles confirm the overall north‐east orientation of the flame structures and provide a basis for recognition of potential larger‐scale examples of flames in seismic reflection data sets.  相似文献   

7.
The Feos Formation of the Nijar Basin comprises sediments deposited during the final stage of the Messinian salinity crisis when the Mediterranean was almost totally isolated. Levels of soft‐sediment deformation structures occur in both conglomeratic alluvial sediments deposited close to faults and the hyposaline Lago Mare facies, a laminated and thin‐bedded succession of whitish chalky marls and intercalated sands alternating with non‐marine coastal plain deposits. Deformation structures in the coarse clastics include funnel‐shaped depressions filled with conglomerate, liquefaction dykes terminating downwards in gravel pockets, soft‐sediment mixing bodies, chaotic intervals and flame structures. Evidence for soft‐sediment deformation in the fine‐grained Lago Mare facies comprises syndepositional faulting and fault‐grading, sandstone dykes, mixed layers, slumping and sliding of sandstone beds, convolute bedding, and pillar and flame structures. The soft‐sediment deformed intervals resemble those ascribed elsewhere to seismic shaking. Moreover, the study area provides the appropriate conditions for the preservation of deformation structures induced by seismicity; such as location in a tectonically active area, variable sediment input to produce heterolithic deposits and an absence of bioturbation. The vertical distribution of soft‐sediment deformation implies frequent seismic shocks, underlining the importance of seismicity in the Betic region during the Late Messinian when the Nijar Basin became separated from the Sorbas Basin to the north. The presence of liquefied gravel injections in the marginal facies indicates strong earthquakes (M ≥ 7). The identification of at least four separate fissured levels within a single Lago Mare interval suggests a recurrence interval for large magnitude earthquakes of the order of millennia, assuming that the cyclicity of the alternating Lago Mare and continental intervals was precession‐controlled. This suggestion is consistent with the present‐day seismic activity in SE Spain.  相似文献   

8.
The macro‐ and micro‐sedimentology of a supraglacial melt‐out till forming at the Matanuska Glacier was examined in relationship to the properties of the stratified basal zone ice and debris from which it is originating. In situ melting of the basal ice has produced a laminated to bedded diamicton consisting mainly of silt. Macroscopic properties include: discontinuous laminae and beds; lenses of sand, silt aggregates and open‐work gravel; deformed and elongate clasts of clay; widely dispersed pebbles and cobbles, those that are prolate usually with their long axes subparallel to parallel to the bedding. Evidence for deformation is absent except for localized bending of beds over or under rock clasts. Microscopic properties are a unique element of this work and include: discontinuous lineations; silt to granule size laminae; prolate coarse sand and rock fragments commonly with their long axis subparallel to bedding; subangular to subrounded irregular shaped clay clasts often appearing as bands; sorted and unsorted silt to granule size horizons, sometimes disrupted by pore‐water pathways. Limited deformation occurs around rock clasts and thicker parts of lamina. This study shows that in situ melting of debris‐rich basal ice can produce a laminated and bedded diamicton that inherits and thereby preserves stratified basal ice properties. Production and preservation of supraglacial melt‐out till require in situ melting of a stagnant, debris‐rich basal ice source with a low relief surface that becomes buried by a thick, stable, insulating cover of ice‐marginal sediment. Also required are a slow melt rate and adequate drainage to minimize pore‐water pressures in the till and overlying sediment cover to maintain stability and uninterrupted deposition. Many modern and ancient hummocky moraines down glacier of subglacial overdeepenings probably meet these process criteria and their common occurrence suggests that both modern and pre‐modern supraglacial melt‐out tills may be more common than previously thought.  相似文献   

9.
Devonian in the North Qilian orogenic belt and Hexi Corridor developed terrestrial molasse of later stage of foreland basin caused by collision between the North China plate and Qaidam microplate. The foreland basin triggered a intense earthquake, and formed seismites and earthquake-related soft-sediment deformation. The soft-sediment deformation structures of Devonian in the eastern North Qilian Mts. consist of seismo-cracks, sandstone dykes, syn-depositional faults, microfolds (micro-corrugated lamination), fluidized veins, load casts, flame structures, pillow structures and brecciation. The seismo-cracks, syn-depositional faults and microfolds are cracks, faults and folds formed directly by oscillation of earthquake. The seismic dykes formed by sediment instilling into seismic cracks. Fluidized veins were made by instilling into the seismo-fissures of the fluidized sands. The load casts, flame structures and pillow structures were formed by sinking and instilling caused from oscillation of earthquake along the face between sandy and muddy beds. The brecciation resulted from the oscillation of earthquake and cracking of sedimentary layers. The seismites and soft-sediment deformations in Devonian triggered the earthquake related to tectonic activities during the orogeny and uplift of North Qilian Mts.  相似文献   

10.
The Kaskapau and Cardium Formations span Late Cenomanian to Early Coniacian time and were deposited on a low‐gradient foredeep ramp. The studied portion of the Kaskapau Formation spans ca 3·5 Myr and forms a mudstone‐dominated wedge thinning from 700 to <50 m from SW to NE over ca 300 km. In contrast, the Cardium Formation spans about 2·1 Myr, is about 100 m thick, sandstone‐rich and broadly tabular. The Kaskapau and Cardium Formations are divided, respectively, into 28 and nine allomembers, each bounded by marine flooding surfaces. Kaskapau allomembers 1 to 7 show about 200 km of offlap from the forebulge, accompanied by progradation of thin sandstones from the eroded forebulge crest. In contrast, Kaskapau allomembers 8 to 28 and Cardium allomembers C1 to C9 show overall onlap onto the forebulge of about 350 km, and contain no forebulge‐derived sandstones. This broad pattern is interpreted as recording a latest Cenomanian pulse of tectonic loading which led to shoreline back‐step in the proximal foredeep and coeval uplift of the forebulge, leading to erosion. The advance of the sediment wedge after Kaskapau allomember 7 is attributed primarily to the isostatic effect of a distributed sediment load; the advance of the orogenic wedge had a subordinate effect on subsidence of the forebulge. For Kaskapau allomembers 1 to 6, isopachs trend north to south, suggesting a load directly to the west; allomembers 7 to 28 show an abrupt rotation of isopachs to NW–SE, suggesting that the load shifted several hundred kilometres to the south. This re‐orientation might be related to a change from an approximately orthogonal to a dextral transpressive stress regime. Within the longer‐term offlap–onlap cycle recorded by the Kaskapau and Cardium Formations, individual allomembers are grouped into packages reflecting higher‐frequency onlap–offlap cycles, each spanning ca 0·5 to 0·7 Myr. Offlap from the forebulge tends to be accompanied by more pronounced transgression in the foredeep, whereas onlap onto the forebulge is accompanied by progradation of tongues of shoreface sandstone. This relationship suggests that changes in deformation rate in the orogenic wedge modulated proximal subsidence rate, enhancing or suppressing shoreline progradation, and also causing subtle uplift or subsidence of the forebulge region. Wedge‐shaped allomembers in the Kaskapau Formation contain shoreface sandstone and conglomerate that prograded, respectively, <40 and <25 km from the preserved basin margin; progradation of coarse clastics was limited by rapid flexural subsidence. Tabular allomembers of the Cardium Formation imply a low flexural subsidence rate and contain sandy and conglomeratic shoreface deposits that prograded up to ca 180 km from the preserved basin margin. This relationship suggests that low rates of flexural subsidence promoted steeper alluvial gradients, more vigorous gravel transport and more extensive shoreface progradation. Overall, observed stratal geometry and facies distribution is explained readily in terms of current elastic flexural models. Most shoreface sandstones in the proximal foredeep show evidence of forced regression. Eustasy provides the most plausible explanation for relative sea‐level rise–fall cycles on the 125 kyr allomember timescale. Geometric relationships suggest eustatic oscillations of about 10 m. Forced regressive shoreface development was suppressed during Kaskapau allomembers 1 to 10 when the rate of flexural subsidence was at its highest.  相似文献   

11.
地质名山馒头山及其附近早寒武世古地震沉积事件研究   总被引：1，自引：0，他引：1  
蜚声中外的地质名山馒头山处在济南南部山区。通过野外调查和室内研究,从馒头山及其附近的青杨村东山、红叶谷、滚球山等地的下寒武统中,鉴别出了许多地震引起的同沉积变形构造（震积岩）,主要有卷曲变形（震褶岩）、粒序微断层、滑移构造、滑塌褶曲、负载构造、枕状体、混插沉积、软硅质脉、软硅质层底辟构造、硅藻叠层石变形、沉陷构造、触变楔、布丁、震裂缝、震裂角砾岩及震碎角砾岩等。本文较详细地阐述了它们的特征和形成机理。触变楔属国内首次发现。触变楔和沉陷构造发育在夹软硅质层的白云岩中,其原始沉积物是含软硅质层的白云质灰泥。受强震触动,因软硅质沉积物(SiO2·nH2O)的粘度变小,软硅质层的粘度变小而变得更软,灰泥同时发生液化;在竖向震动力作用下,软硅质层被断开、继而沉陷形成了沉陷构造;沉陷构造向下延伸,结果使断开的硅质层汇聚,形成了触变楔。根据早寒武世古构造板块与地震带的分布,认为这些地震沉积遗迹是早寒武世板内地震记录,推测由古郯庐带的构造活动的响应。这些古地震事件记录的发现,丰富了济南南部山区、尤其是馒头山的地质科学内涵。   相似文献   

12.
The dominance of isotropic hummocky cross‐stratification, recording deposition solely by oscillatory flows, in many ancient storm‐dominated shoreface–shelf successions is enigmatic. Based on conventional sedimentological investigations, this study shows that storm deposits in three different and stratigraphically separated siliciclastic sediment wedges within the Lower Cretaceous succession in Svalbard record various depositional processes and principally contrasting sequence stratigraphic architectures. The lower wedge is characterized by low, but comparatively steeper, depositional dips than the middle and upper wedges, and records a change from storm‐dominated offshore transition – lower shoreface to storm‐dominated prodelta – distal delta front deposits. The occurrence of anisotropic hummocky cross‐stratification sandstone beds, scour‐and‐fill features of possible hyperpycnal‐flow origin, and wave‐modified turbidites within this part of the wedge suggests that the proximity to a fluvio‐deltaic system influenced the observed storm‐bed variability. The mudstone‐dominated part of the lower wedge records offshore shelf deposition below storm‐wave base. In the middle wedge, scours, gutter casts and anisotropic hummocky cross‐stratified storm beds occur in inferred distal settings in association with bathymetric steps situated across the platform break of retrogradationally stacked parasequences. These steps gave rise to localized, steeper‐gradient depositional dips which promoted the generation of basinward‐directed flows that occasionally scoured into the underlying seafloor. Storm‐wave and tidal current interaction promoted the development and migration of large‐scale, compound bedforms and smaller‐scale hummocky bedforms preserved as anisotropic hummocky cross‐stratification. The upper wedge consists of thick, seaward‐stepping successions of isotropic hummocky cross‐stratification‐bearing sandstone beds attributed to progradation across a shallow, gently dipping ramp‐type shelf. The associated distal facies are characterized by abundant lenticular, wave ripple cross‐laminated sandstone, suggesting that the basin floor was predominantly positioned above, but near, storm‐wave base. Consequently, shelf morphology and physiography, and the nature of the feeder system (for example, proximity to deltaic systems) are inferred to exert some control on storm‐bed variability and the resulting stratigraphic architecture.  相似文献   

13.
《Sedimentology》2018,65(6):2149-2170
Hyperpycnal currents are river‐derived turbidity currents capable of transporting significant volumes of sediment from the shoreline onto the shelf and potentially further to deep ocean basins. However, their capacity to deposit sand bodies on the continental shelf is poorly understood. Shelf hyperpycnites remain an overlooked depositional element in source to sink systems, primarily due to their limited recognition in the rock record. Recent discoveries of modern shelf hyperpycnites, and previous work describing hyperpycnites deposited in slope or deep‐water settings, provide a valuable framework for understanding and recognizing shelf hyperpycnites in the rock record. This article describes well‐sorted lobate sand bodies on the continental shelf of the Neuquén Basin, Argentina, interpreted to have been deposited by hyperpycnal currents. These hyperpycnites of the Jurassic Lajas Formation are characterized by well‐sorted, medium‐grained, parallel‐laminated sandstones with hundreds of metre extensive, decimetre thick beds encased by organic‐rich, thinly laminated sandstone and siltstone. These deposits represent slightly obliquely‐migrating sand lobes fed by small rivers and deposited on the continental shelf. Hyperpycnites of the Lajas Formation highlight several unique characteristics of hyperpycnal deposits, including their distinctively thick horizontal laminae attributed to pulsing of the hyperpycnal currents, the extraction of coarse gravel due to low flow competence, and the extraction of mud due to lofting of light interstitial fluid. Recognition of shelf hyperpycnites in the Lajas Formation of the Neuquén Basin allows for a broader understanding of shelf processes and adds to the developing facies models of hyperpycnites. Recognizing and understanding the geometry and internal architecture of shelf hyperpycnites will improve current understanding of sediment transfer from rivers to deeper water, will improve palaeoenvironmental interpretations of sediment gravity‐flow deposits, and has implications for modelling potentially high‐quality hydrocarbon reservoirs.  相似文献   

14.
柴达木盆地为一新生代以来形成的叠合盆地,由于多期构造活动,盆内形成了多组断裂系统。受新近纪昆仑山北侧断裂活动的影响,盆地西南缘乌南地区地震活动强烈,发育一系列与地震有关的震积岩,形成多种类型的与地震活动有关的软沉积物变形构造。乌南油田新近系的软沉积物变形构造主要包括重荷模、火焰构造、震积砂枕、砂球构造、假结核、枕状层、液化砂泥岩脉、泄水构造、层内错断、地裂缝、串珠状构造、微褶皱纹理等。本区震积岩的岩石类型主要包括震褶岩、震裂岩、震塌岩、自碎屑角砾岩等。地震活动使岩层产生大量的微裂缝,裂缝沟通了原有的孔隙。尽管储集层孔隙度没有大幅度增加,但能够极大地改善储集层渗透性,使渗透率大幅度增加。震积岩特别是震裂岩和震碎角砾岩是一种潜在的油气储层,为油气勘探和开发提供了新的视角和领域。  相似文献   

15.
通过野外观察,发现贺兰山中段长城系黄旗口组中发育大量的软沉积变形构造,主要包括液化砂岩墙（脉）、液化水压破碎构造和液化角砾岩、负荷构造、砂岩球和砂岩枕构造、砂岩串珠状构造、包卷层理（液化卷曲变形）、阶梯状微断层等。室内显微镜下观察发现,石英砂岩成分成熟度相对较高,但结构成熟度较低,颗粒多呈次圆状-圆状,粒径大小不等,碎屑颗粒间有泥质混入,泥质多呈不规则脉状穿插在砂岩中,显微镜下也见微逆断层切过纹层。沉积环境分析结果显示,黄旗口组发育脊状波痕、小型交错层理、水平层理、泥裂等沉积构造,指示沉积时水体较浅,沉积环境为滨-浅海。认为黄旗口组中的软沉积变形构造不是由上覆重荷引起,可能为古地震成因。在黄旗口组中第一段下部识别出4个地震事件层,推测黄旗口组沉积时早期地壳运动相对活跃,晚期渐趋稳定。地震岩的出现可能与贺兰裂陷槽拉张-裂陷的构造背景有关。  相似文献   

16.
The La Popa Basin in north‐eastern Mexico features outstanding, continuous three‐dimensional exposures of the Cretaceous–Palaeogene boundary event deposit in shallow shelf environments pierced by salt stocks. In the area to the south‐east of the El Papalote diapir, the Cretaceous–Palaeogene deposit consists of two superimposed sedimentary units and erosively overlies upper Maastrichtian sand‐siltstones with soft‐sediment deformation and liquefaction structures. The basal unit 1 is an up to 8 m thick chaotic, carbonate‐rich bed that discontinuously fills incised gutters and channels. Besides abundant silicic and carbonate ejecta spherules from the Chicxulub impact, unit 1 includes large sandstone boulders and abundant shallow‐water debris (for example, mud clasts, algae, bivalve shells, gastropod shells and vertebrate remains). Unit 1 is conformably overlain by unit 2. Distal to the diapir, unit 2 consists of a centimetre to decimetre‐thick conglomeratic, coarse bioclast and spherule‐bearing sandstone bed. Closer to the diapir, unit 2 becomes a metre‐thick series of four to eight conglomeratic to fine‐grained graded sandstone beds rich in shell debris and ejecta spherules. Unit 2 is conformably overlain by structureless to parallel laminated sandstone beds that may mark the return to the pre‐event depositional regime. The sedimentary characteristics of the Cretaceous–Palaeogene deposit, including its erosive base, its sheet‐like geometry, the presence of multiple, graded beds, evidence for upper flow regime conditions and the absence of bioturbation, support an origin by a short‐term multiphase depositional event. The occurrence of soft‐sediment deformation structures (for example, liquefaction) below the Cretaceous–Palaeogene deposit suggests that earthquakes were the first to occur at La Popa. Then, shelf collapse and strong backflow from the first tsunami waves may have triggered erosion and deposition by violent ejecta‐rich hyperconcentrated density flows (unit 1). Subsequently, a series of concentrated density flows resulting from tsunami backwash surges may have deposited the multiple‐graded bedding structures of unit 2. The specific depositional sequence and the Fe‐Mg‐rich as well as Si‐K‐rich composition of the ejecta spherules both provide a critical link to the well‐known deep marine Cretaceous–Palaeogene boundary sites in the adjacent Burgos basin in north‐eastern Mexico. Moreover, the pulse‐like input of Chicxulub ejecta material at the base of the event deposit allows for correlation with other Cretaceous–Palaeogene boundary sites in the Gulf of Mexico and the Atlantic, as well as in Central and Northern America. The presence of diverse dinosaur and mosasur bones and teeth in the event deposit is the first observation of such remains together with Chicxulub ejecta material. These findings indicate that dinosaurs lived in the area during the latest Maastrichtian and suggest that the tsunami waves not only eroded deltas and estuaries but the coastal plain as well.  相似文献   

17.
The Sivas Basin, located on the Central Anatolian Plateau in Turkey, is an elongate Oligo‐Miocene basin that contains numerous salt‐walled mini‐basins. Through field analysis, including stratigraphic section logging, facies analysis and geological mapping, a detailed tectono‐stratigraphic study of the Emirhan mini‐basin and its 2·6 km thick sediment fill has been undertaken. Three main palaeoenvironments are recognized – playa‐lake, braided stream and lacustrine – each corresponds to a relatively long‐lived depositional episode within a system that was dominated overall by the development of a distributive fluvial system. At local scale, this affects the geometry of the succession and influences facies distributions within preserved sequences. Sequences affected by wedge geometries are characterized by localized channelized sandstone bodies in the area of maximum subsidence and these pass laterally to floodplain mudstone towards the diaper; several internal unconformities are recognized. By contrast, sequences affected by hook geometries display narrow and steep drape‐fold geometries with no evidence of lateral facies change and apparent conformity in the preserved succession. The sediment fill of the Emirhan mini‐basin records the remobilization of diapir‐derived detritus and the presence of evaporitic bodies interbedded within the mini‐basin, implying the growth of salt walls expressed at the surface as palaeo‐topographic highs. The mini‐basin also records the signature of a regional change in stratigraphic assemblage, passing from playa‐lake facies to large‐scale highly amalgamated fluvial facies that represent progradation of the fluvial system. The initiation and evolution of this mini‐basin involves a variety of local and regional controls. Local factors include: (i) salt withdrawal, which influenced the rate and style of subsidence and consequently temporal and spatial variation in the stratigraphic assemblage and the stratal response related to halokinesis; and (ii) salt inflation, which influenced the topographic expression of the diapirs and consequently the occurrence of diapir‐derived detritus intercalated within the otherwise clastic‐dominated succession.  相似文献   

18.
Dune stratification types, which include grainfall, grainflow and ripple lamination, provide a record of the fine‐scale processes that deposited sediment on palaeo‐dune foresets. While these facies are relatively easy to distinguish in some cross‐bedded sandstones, for others – like the Permian Coconino Sandstone of northern and central Arizona – discrete stratification styles are hard to recognize at the bedding scale. Furthermore, few attempts have been made to classify fine‐scale processes in this sandstone, despite its renown as a classic aeolian dune deposit and Grand Canyon formation. To interpret depositional processes in the Coconino Sandstone, cross‐bed facies were characterized using a suite of sedimentary textures and structures. Bedding parameters were described at multiple scales via a combination of field and laboratory methods, including annotated outcrop photomosaics, strike and dip measurements, sandstone disaggregation and laser‐diffraction particle analysis, high‐resolution scans of thin sections, and scanning electron microscopy. Cross‐beds were observed to be laterally extensive along‐strike, with most dip angles ranging from the mid‐teens to mid‐twenties. While some cross‐bed sets are statistically coarser near their bases, others exhibit no significant vertical sorting trends. Both massive and laminated textures are visible in high‐resolution scans of thin sections, but laminae contacts are commonly indistinct, making normal and reverse grading difficult to define. Diagenetic features, such as stylolite seams and large pores, are also present in some samples and might indicate alteration of original textures like detrital clay laminae and carbonate minerals. Observed textures and sedimentary structures suggest that the cross‐beds may consist of grainflow and grainfall deposits, but these remain difficult to differentiate at outcrop and thin‐section scales. This characterization of fine‐scale processes will play a critical part in the development of depositional models for the Coconino Sandstone and elucidate interpretations for similar cross‐bedded formations.  相似文献   

19.
Dunes and bars are common elements in tide‐dominated shelf settings. However, there is no consensus on a unifying terminology or a systematic classification for thick sets of cross‐stratified sandstones. In addition, their ichnological attributes have hardly been explored. To address these issues, the properties, architecture and ichnology of compound cross‐stratified sandstone bodies contained in the Lower Cambrian Gog Group of the southern Canadian Rocky Mountains are described here. In these transgressive sandstones, five types of compound cross‐stratified sandstone are distinguished based on foreset geometry, sedimentary structures and internal heterogeneity. These represent four broad categories of subtidal sandbodies: (i) compound‐dune fields; (ii) sand sheets; (iii) sand ridges; and (iv) isolated dune patches; tidal bars comprise a fifth category but are not present in the Gog Group. Compound‐dune fields are characterized by sigmoidal and planar cross‐stratified sandstone in coarsening‐upward and thickening‐upward packages (Type 1); these are mostly unburrowed, or locally contain representatives of the Skolithos ichnofacies, but are intercalated with intensely bioturbated sandstone containing the archetypal Cruziana ichnofacies. Sand‐sheet complexes, also composed of compound dunes, cover more extensive subtidal areas, and comprise three adjacent subenvironments: core, front and margin. The core is characterized by thick‐bedded sets of cross‐stratified sandstone (Type 2). A decrease of bedform size at the front is recorded by wedges of thinner‐bedded, low‐angle and planar cross‐stratified sandstone (Type 3) exhibiting dense Skolithos pipe‐rock ichnofabric. The margin is characterized by interbedded sandstone and mudstone, and hummocky cross‐stratified sandstone. Sand‐sheet deposits exhibit clear trends in trace‐fossil distribution along the sediment transport path, from non‐bioturbated beds in the core to Skolithos ichnofacies at the front, and a depauperate Cruziana ichnofacies at the margin. Tidal sand ridges are large elongate sandbodies characterized by large sigmoid‐shaped reactivation surfaces (Type 4). Sand ridges display clear ichnological trends perpendicular to the axis of the ridge, with no bioturbation or a poorly developed Skolithos ichnofacies in the core, a depauperate Cruziana ichnofacies in lee‐side deposits, and Cruziana ichnofacies at the margin. While both tidal ridges and tidal bars migrate by means of lateral accretion, the latter occur in association with channels while the former do not. Because tidal bars tend to occur in brackish‐water marginal‐marine settings, their ichnofauna are typically of low diversity, representing a depauperate Cruziana ichnofacies. Isolated dune patches developed on sand‐starved areas of the shelf, and are represented by lenticular sandbodies with sigmoidal reactivation surfaces (Type 5); they typically lack trace fossils, but the interfingering muddy deposits are intensely bioturbated by a high‐diversity fauna recording the Cruziana ichnofacies. The variety of sandbody types in the Gog Group reflects varying sediment supply and location on the inner continental shelf. These, in turn, governed substrate mobility, grain size, turbidity, water‐column productivity and sediment organic matter which controlled trace fossil distribution.  相似文献   

20.
Distinctive, metre‐scale antiformal structures are well developed in a Famennian carbonate platform in the Chedda Cliffs area of the Lennard Shelf reef complexes. The structures are distinguished by chevron‐shaped crests and thickened cores and contain abundant non‐skeletal allochems (ooids/pisoids, peloids and intraclasts) of silt to pebble size and variably developed laminations and fenestrae. The internal morphology and pervasive occurrence of fenestral clotted and wavy laminated fabrics suggest that these structures are microbial mounds composed of agglutinated stromatolites and thrombolites. Microbial fabrics most probably originated through sediment trapping and binding by microbial mats with early lithification involving microbial calcification and cementation of trapped sediment. The facies and stratigraphic context of the mounds support a shallow subtidal, transitional backreef to reef‐flat setting; however, alone these mounds do not provide unequivocal environmental information. Other large antiformal structures in Famennian platforms on the Lennard Shelf, previously described as tepee structures, show morphological similarities to the Chedda Cliffs mounds, which suggests that these other structures may also be microbial mounds. The presence of microbial mounds in platform successions further highlights the importance of microbial communities in the Lennard Shelf reef complexes.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号