The application of high-resolution sequence stratigraphy to fluvial systems: a case study from the Upper Carboniferous Breathitt Group, eastern Kentucky, USA   总被引：13，自引：0，他引：13  

JOHN F. AITKEN  STEPHEN S. FLINT 《Sedimentology》1995,42(1):3-30

The Pennsylvanian Pikeville, Hyden and Four Corners formations of the Breathitt Group in eastern Kentucky, USA, contain six major facies associations along with a number of subassociations. These facies associations are offshore siltstone, rhythmically bedded mouthbar heteroliths, predominantly fine-grained floodplain deposits, minor channel fills, major distributary channels and major, stacked fluvial bodies. The stacked fluvial bodies are incised into a variety of open marine and delta plain deposits, have widths of several kilometres and exhibit a range of sandy fill types. These fluvial complexes are interpreted as incised valley fills. Parasequences and parasequence sets are not identifiable. Nonetheless, it is possible to identify systems tracts on the basis of sequential position, facies associations and systematic changes in architectural style and sediment body geometries. The studied portion of the Breathitt Group comprises stacked 4th-order sequences, which occur in lowstand, transgressive and highstand sequence sets related to the development of a lower frequency base level cycle. In the lowstand sequence set, incision associated with successive 4th-order sequence boundaries has commonly removed all the HST and TST of the underlying sequences, such that succeeding 4th-order incised valley fills are amalgamated. Within the transgressive sequence set, incision is at a minimum and incised valley fills tend to stack discretely with the maximum amount of fine-grained TST and HST between them. The highstand sequence set is transitional between the lowstand and transgressive sequence sets in terms of the amount of transgressive and highstand deposits preserved. Incised valley fills tend to stack discretely.  相似文献   

Injection clastic dykes in the Lower Oxford Clay (Jurassic) of central England: relationship to compaction and concretion formation   总被引：1，自引：0，他引：1  

DAVID M. MARTILL  JOHN D. HUDSON† 《Sedimentology》1989,36(6):1127-1133

An injection dyke of fine-grained sandstone derived from the Kellaways Sand Formation intrudes overlying organic-rich shales and shell beds of the Lower Oxford Clay. The dyke shows cross-cutting relationships with early carbonate concretions, and fills uncompacted kosmoceratid ammonite shells both within the concretions and surrounding shales. Internally the dyke displays flow-like features, and the walls show lobate flow structures. Clasts of uncompacted Lower Oxford Clay and fragments of pyrite-rich concretions occur within the sandstone intrusions. The sandstone of the dyke was cemented by calcite identical to that precipitated in septarian cracks in the concretions. This cementation took place prior to final compaction of the Oxford Clay. The dyke has a sub-parallel relationship to the nearby Tinwell-Marholm fault suggesting that the dyke may be related to local tectonic events during the Middle Jurassic.  相似文献   

WHICH PRINCIPAL COMPONENTS TO UTILIZE FOR PRINCIPAL COMPONENT REGRESSION   总被引：1，自引：0，他引：1  

JONM.SUTTER  JOHNH.KALIVAS  PATRICK M.LANG 《地理学报(英文版)》1992,(4)

Principal components(PCs)for principal component regression(PCR)have historically been selectedfrom the top down for a reliable predictive model.That is,the PCs are arranged in a list starting withthe most informative(PC associated with the largest singular value)and proceeding to the leastinformative(PC associated with the smallest singular value).PCs are then chosen starting at the top ofthis list.This paper discusses an alternative procedure of treating PC selection as an optimization prob-lem.Specifically,without any regard to the ordering,the optimal subset of PCs for an acceptablepredictive model is desired.Five data sets are analyzed using the conventional and alternative approaches.Two data sets are spectroscopic in nature,two data sets deal with quantitative structure-activityrelationships(QSARs)and one data set is concerned with modeling.All five data sets confirm thatselection of a subset without consideration to order secures the best results with PCR.One data set isalso compared using partial least squares 1.  相似文献   

DATA ANALYSIS WITH MINIMAL ASSUMPTIONS     

JOHN MANDEL 《地理学报(英文版)》1992,(5)

The computer has made it possible to scrutinize data rapidly by means of graphics. This should be doneprior to the application of any model to the data, since the model must be validated before using it asa means of analyzing the data. The procedure is illustrated in terms of two examples of real experimentaldata.  相似文献   

Flow and sediment dynamics in a low sinuosity, braided river: Calamus River, Nebraska Sandhills   总被引：1，自引：0，他引：1  

JOHN S. BRIDGE  SHARON L. GABEL 《Sedimentology》1992,39(1):125-142

The interaction between channel geometry, flow, sediment transport and deposition associated with a midstream island was studied in a braided to meandering reach of the Calamus River, Nebraska Sandhills. Hydraulic and sediment transport measurements were made over a large discharge range using equipment operated from catwalk bridges. The relatively low sinuosity channel on the right-hand side of the island carries over 70% of the water discharge at high flow stages and 50–60% at low flow stages. As a result, mean velocity, depth, bed shear stress and sediment transport rate tend to be greater here than in the more strongly curved left-hand channel. The loci of maximum flow velocity, depth and bed shear stress are near the centre of the channel upstream of the island, but then split and move towards the outer banks of both channels downstream. Variations in these loci depend on the flow stage. Topographically induced across-stream flows are generally stronger than the weak, curvature-induced secondary circulations. Water surface topography is controlled mainly by centrifugal accelerations and local changes in downstream flow velocity. The averaged water surface slope of the study reach varies very little with discharge, having values between 0·00075 and 0·00090. As bed shear stress generally varies in a similar way to mean velocity, friction coefficients vary little, normally being in the range 0·07–0·13. These values are similar to those in straight channels with sandy dune-covered beds. Bedload is moved mainly as dunes at all flow stages. Grain size is mainly medium sand with coarse sand moved in thalwegs adjacent to the cut banks, and with fine sand at the downstream end of the island. These patterns of flow velocity, depth, water surface topography, bed shear stress, bedload transport rate and mean grain size can be accurately predicted using theoretical models of flow, bed topography and sediment transport rate in single river bends, applied separately to the left and right channels. During high flow stages deposition occurs persistently near the downstream end of the island, and cut banks are eroded. Otherwise, erosion and deposition occurs only locally within the channel as discharge varies. Abandonment and filling of a strongly curved channel segment may occur by migration of an upstream bar into the channel entrance at a high flow stage.  相似文献   

Halite saltern in the Canning Basin, Western Australia: a sedimentological analysis of drill core from the Ordovician-Silurian Mallowa Salt     

DONNA L. CATHRO  JOHN K. WARREN†  GEORGE E. WILLIAMS‡ 《Sedimentology》1992,39(6):983-1002

The Late Ordovician-Early Silurian Mallowa Salt of the Carribuddy Group, Canning Basin, north-west Australia, is the largest halite deposit known in Australia, attaining thicknesses of 800 m or more within an area of approximately 200 000 km². Study of 675 m of drill core from BHP-Utah Minerals’ Brooke No. 1 well in the Willara Sub-basin indicates that the Mallowa Salt accumulated within a saltern (dominantly subaqueous evaporite water body) that was subject to recurrent freshening, desiccation and exposure. Textures and bromine signatures imply a shallow water to ephemeral hypersaline environment typified by increasing salinity and shallowing into evaporitic mudflat conditions toward the top of halite-mudstone cycles (Type 2) and the less common dolomite/anhydrite-halite-mudstone cycles (Type 1). The borate mineral priceite occurs in the capping mudstones of some cycles, reinforcing the idea of an increasing continental influence toward the top of mudstone-capped halite cycles. The rock salt in both Type 1 and Type 2 cycles typically comprises a mosaic of large, randomly orientated, interlocking halite crystals that formed during early diagenesis. It only partially preserves a primary sedimentary fabric of vertically elongate crystals, some with remnant aligned chevrons. Intraformational hiati, halite karst tubes and solution pits attest to episodic dissolution. Stacked Type 2 cycles dominate; occasional major recharges of less saline, perhaps marine, waters in the same area produced Type I cycles. The envisaged saltern conditions were comparable in many ways to those prevailing during the deposition of halite cycles of the Permian Salado Formation in New Mexico and the Permian San Andres Formation of the Palo Duro Basin area in Texas. However, in the Canning Basin the cycles are characterized by a much lower proportion of anhydrite, implying perhaps a greater degree of continental restriction to the basin. The moderately high level of bromine in the Mallowa Salt (156·5 ± 43·5 ppm Br for primary halite, 146·1 ± 54·7 ppm Br for secondary halite) accords with evolved continental brines, although highly evaporative minerals such as polyhalite and magnesite are absent. The bromine levels suggest little or no dissolution/reprecipitation of primary halite and yet, paradoxically, there is little preservation of the primary depositional fabric. The preservation of early halite cements and replacement textures supports the idea of an early shutdown of brine flow paths, probably at burial depths of no more than a few metres, and the resultant preservation of primary bromine values in the secondary halite.  相似文献   

Atmospheric deposition to a high-elevation forest at Whiteface Mountain, New York, USA   总被引：1，自引：0，他引：1  

ERIC K. MILLER  JEANNE A. PANEK  REW J. FRIEDLAND  JOHN KADLECEK  VOLKER A. MOHNEN 《Tellus. Series B, Chemical and physical meteorology》1993,45(3):209-227

  相似文献   

Microbiological effects on slope stability: an experimental analysis   总被引：1，自引：0，他引：1  

AZRA MEADOWS  PETER S. MEADOWS  DAVID MUIR WOOD†  JOHN M. H. MURRAY 《Sedimentology》1994,41(3):423-435

A natural, pure quartz sand has been seeded with the bacterium Pseudomonas atlantica and the fungus Penicillium chrysogenum, and angles of avalanche and repose have been measured under water using a laboratory clinometer. The lowest angles of avalanche occur in freshly packed clean sediment (control), with the seeded sediments having higher values. Among the latter, the lowest angles of repose occur in the bacterial seeded sediments, and the highest in the fungal seeded sediments. The largest differences between the angle of avalanche and angle of repose occur in the bacterial seeded and media control sediments. The smallest differences occur in the fungal seeded sediment. In most cases the second angle of avalanche is lower than the first angle of avalanche, whilst the second angle of repose is higher than the first angle of repose. The bacteria bind particles together with their extracellular polymeric material, while the fungus binds particles by holding them together with a network of hyphal filaments. In the bacterial seeded sediment growth is uniform over the sediment surface. In the fungal seeded sediment growth occurs as discrete colonies separated by bare sediment, and the fungal hyphae penetrate the sediment to a significant depth. On avalanching, the fungal colonies move down the slope with the hyphal filaments trailing behind them in the sediment. Overall, both the bacterium and the fungus increase slope stability. However, the fungal colonies maintain slope stability after avalanching more effectively than does the uniform bacterial growth. The results are discussed in relation to the wide range of biological effects that stabilize flat sediments and to laboratory and field studies on the stability of sediment slopes.  相似文献   

Coastal peats from northwest Ireland: implications for late-Holocene relative sea-level change and shoreline evolution   总被引：2，自引：0，他引：2  

JOHN SHAW  RICHARD W. G. CARTER† 《Boreas: An International Journal of Quaternary Research》1994,23(1):74-91

Peat and organic rich sediments at coastal sites in extreme northwest Ireland have accumulated in a wide variety of environments, often strongly influenced by late Holocene changes in relative sea level and by geomorphic processes. A deep peat sequence on the coast of Aranmore Island accumulated initially in a lake and subsequently in a freshwater marsh environment. The long pollen record serves as a template for regional events. It extends over much of the Holocene and shows relatively high levels of Pinus pollen up to just before the disappearance of this taxon at c . 3600 BP. Coastal peat occurrences elsewhere are much thinner and have accumulated over shorter periods; they contain further evidence to show that coastal areas were well-wooded compared with today, and that Pinus was an important woodland component prior to c . 4000 BP. At sites in Gweebarra Bay intertidal peats record the closure of small estuaries by geomorphological events during the past 5000 years. Coastal sites at Ballyness, Clonmass, and Trawenagh display regressive stratigraphies ˜ minerogenic marine sediments are overlain by silty peats capped by highly organic freshwater peats. Basal radiocarbon dates range from 4500 to 3300 BP. The silty peats are interpreted as having formed in salt-marsh environments and contain distinctive pollen spectra, marked by high levels of Pinus and Compositae Liguliflorae pollen. The data suggest that relative sea level attained levels close to that of today by the mid-Holocene in this region. The pattern of relative sea-level change agrees well with that predicted by geophysical modelling.  相似文献   

Sedimentology, mineralogy and isotopic analysis of Pellet Lake, Coorong region, South Australia   总被引：2，自引：0，他引：2  

MICHAEL R. ROSEN  DONALD E. MISER  JOHN K. WARREN 《Sedimentology》1988,35(1):105-122

ABSTRACT Gravity cores of Holocene sediments from a shallow ephemeral lake in the Coorong region (Pellet Lake, southeastern coastal Australia) show a mineral assemblage and sequence particular to its hydrology. The mineralogical sequence above an initial dolomitic siliciclastic sand reflects conditions of increasing salinity in the lower portions of the core (i.e. organic-rich aragonite to magnesite + hydromagnesite + aragonite) followed by a relative decrease in salinity (i.e. magnesite + aragonite + hydromagnesite to aragonite + hydromagnesite) in the upper portions of the core. This sequence is capped by ? 0.4 m of micritic dolomite and minor amounts of hydromagnesite, with the relative abundance of dolomite increasing upwards. Three stratigraphically and spatially distinct dolomite units (upper, lower and margin) are recognized using stable carbon and oxygen isotope data, unit cell calculations and MgCO₃ mole per cent data of the dolomite. Detailed X-ray diffraction (XRD) analyses of samples with more than 80% dolomite shows that the dolomite is ordered. Average unit cell parameters, calculated from the XRD patterns, indicate that the upper dolomite unit has crystal lattices expanded in the c_o direction (c_o= 16.09 Å) relative to ideal dolomite (c_o= 16.02 Å) and contracted in the a_o direction (a_o= 4.796 Å) relative to ideal dolomite (a_o= 4.812 Å). The mol fraction of MgCO₃ in the upper dolomite shows up to 4.0 ±M 2.0 mole per cent excess Mg in the dolomite crystal lattice (calculated from XRD). This unusual dolomite crystal chemistry is probably generated by rapid precipitation from solutions which have greatly elevated Mg/Ca ratios. Transmission electron microscopy reveals that the upper dolomite has a heterogeneous microstructure which also suggests rapid precipitation from solution. The modulated microstructure found in calcium-rich dolomite is completely lacking. Dolomite ordering reflections are present in electron diffraction patterns, but are weak. Stable oxygen and carbon isotope values of the upper dolomite are tightly grouped (ave. δ¹⁸O ～+ 7.55%_o, δ¹³C ～+ 4.10%_o), yet show three upward-lightening oxygen cycles. The oxygen cycles correlate with three upward decreases in the calculated Mg content of the dolomite zone. These cycles may indicate the increased importance of rain-water dilution of the brine at times when the water in the lake was at its shallowest levels. Analyses of the lower dolomite and the margin dolomite suggest that these units precipitated more slowly from less evaporitic brines than the upper dolomite unit. The lower dolomite is close to stoichiometric, has less evaporitic stable isotope values than the upper dolomite, and has only a slightly expanded c_o-axis. The margin dolomite is Ca-rich, has a more homogeneous microstructure, and has expanded a_o and c_o axes. The abundance of relatively soluble Mg-bearing phases, such as hydromagnesite and magnesite, may supply additional magnesium for the dolomitization of aragonite and calcite during subsequent diagenesis and burial of the sediment. This process may leave a finely laminated dolomicrite deposit which retains little, if any, evidence of evaporite minerals.  相似文献