A mathematical model of permeability alteration around wells     

Joseph S. Olarewaju 《国际地质力学数值与分析法杂志》1990,14(3):191-207

This paper presents an analytical solution of the permeability alteration problem around the wellbore. This alteration may be a permeability reduction due to drilling fluid invasion or mudcake formation around the wellbore. On the other hand, the alteration may be a permeability increase resulting from stimulation by acidizing the formation matrix around the well. This permeability discontinuity in a reservoir forms a composite reservoir system. With the composite model, both the degree and the radial extent of permeability alteration can be adequately predicted. The conventional skin concept is inadequate and physically unrealistic in most of these cases. This paper describes the application of an automatic weighted constrained least-squares parameter estimation technique and the analytical model for pressure transient analysis. The parameters of the composite reservoir system are determined from a match of the pressure transient data. The behaviour of the pressure transient in such composite systems is presented using the analytical solution.  相似文献   

Nonlinear bacterial load‐streamflow response on a marine beach          下载免费PDF全文

Wai Thoe  Joseph Hun‐wei Lee 《水文研究》2015,29(6):1238-1251

Bacterial concentration (Escherichia coli) is used as the key indicator for marine beach water quality in Hong Kong. For beaches receiving streamflow from unsewered catchments, water quality is mainly affected by local nonpoint source pollution and is highly dependent on the bacterial load contributed from the catchment. As most of these catchments are ungauged, the bacterial load is generally unknown. In this study, streamflow and the associated bacterial load contributed from an unsewered catchment to a marine beach, Big Wave Bay, are simulated using a modelling approach. The physically based distributed hydrological model, MIKE‐SHE, and the empirical watershed water quality model (Hydrological Simulation Program – Fortran) are used to simulate streamflow and daily‐averaged E. coli concentration/load, respectively. The total daily derived loads predicted by the model during calibration (June–July 2007) and validation (July–October 2008) periods agree well with empirical validation data, with a percentage difference of 3 and 2%, respectively. The simulation results show a nonlinear relationship between E. coli load and rainfall/streamflow and reveal a source limiting nature of nonpoint source pollution. The derived load is further used as an independent variable in a multiple linear regression (MLR) model to predict daily beach water quality. When compared with the MLR models based solely on hydrometeorological input variables (e.g. rainfall and salinity), the new model based on bacterial load predicts much more realistic E. coli concentrations during rainstorms. Copyright © 2014 John Wiley & Sons, Ltd.  相似文献   

Cassini imaging of Saturn's rings: II. A wavelet technique for analysis of density waves and other radial structure in the rings     

Matthew S. Tiscareno  Joseph A. Burns  Philip D. Nicholson  Carolyn C. Porco 《Icarus》2007,189(1):14-34

We describe a powerful signal processing method, the continuous wavelet transform, and use it to analyze radial structure in Cassini ISS images of Saturn's rings. Wavelet analysis locally separates signal components in frequency space, causing many structures to become evident that are difficult to observe with the naked eye. Density waves, generated at resonances with saturnian satellites orbiting outside (or within) the rings, are particularly amenable to such analysis. We identify a number of previously unobserved weak waves, and demonstrate the wavelet transform's ability to isolate multiple waves superimposed on top of one another. We also present two wave-like structures that we are unable to conclusively identify. In a multi-step semi-automated process, we recover four parameters from clearly observed weak spiral density waves: the local ring surface density, the local ring viscosity, the precise resonance location (useful for pointing images, and potentially for refining saturnian astrometry), and the wave amplitude (potentially providing new constraints upon the masses of the perturbing moons). Our derived surface densities have less scatter than previous measurements that were derived from stronger non-linear waves, and suggest a gentle linear increase in surface density from the inner to the mid-A Ring. We show that ring viscosity consistently increases from the Cassini Division outward to the Encke Gap. Meaningful upper limits on ring thickness can be placed on the Cassini Division (3.0 m at r∼118,800 km, 4.5 m at r∼120,700 km) and the inner A Ring (10-15 m for r<127,000 km).  相似文献   

Interactions between submarine channel systems and deformation in deepwater fold belts: Examples from the Levant Basin, Eastern Mediterranean sea   总被引：1，自引：0，他引：1  

Ian R. Clark  Joseph A. Cartwright 《Marine and Petroleum Geology》2009,26(8):1465-1482

Submarine channel levee systems form important hydrocarbon reservoirs in many deep marine settings and are often deposited within a structurally active setting. This study focuses on recent submarine channels that developed within a deepwater fold and thrust belt setting from the Levant Basin, eastern Mediterranean Sea. Compressional deformation within the study area is driven by the up-dip collapse of the Nile cone above the ductile Messinian Evaporites. Structures such as folds and strike slip faults exert a strong control on channel location and development over time. From this study four end-member submarine channel–structure interactions can be defined: Confinement, diversion, deflection and blocking. Each of these channel–structure interactions results in a distinct submarine channel morphology and pattern of development compared to unconfined channel levee systems. Each interaction can also be used to assess timing relationships between submarine channel development and deformation.  相似文献   

Primitive Ordovician (Floian) echinoderms from Sandu,Guizhou Province,South China,and their significance     

Christopher R. C. Paul  Stephen K. Donovan  Lucy A. Muir  Joseph P. Botting  Jih‐Pai Lin  Yuandong Zhang 《Geological Journal》2016,51(1):143-156

Pelmatozoans diversified primarily during the Middle and Late Ordovician Period, with Early Ordovician records being much more limited, resulting in many gaps in our knowledge of the early stages of their diversification. Dissociated pelmatozoan ossicles have been found abundantly in one section in the Tonggao Formation (Tetragraptus approximatus Biozone, Floian, Early Ordovician). Most of the ossicles are thecal plates and stem ossicles from hemicosmitoid and glyptocystitoid cystoids. Thecal plates of ‘Cheirocrinus’ sp., Polycosmites sp., and other plates of uncertain affinity are described. A different ossicle type, Pentagonopentagonalis (col.), may represent crinoid remains; this would be one of the earliest occurrences of the class. The thecal ossicles and columnals are all considered, as both sets of data are desirable to determine the most complete estimate of generic diversity. The echinoderm ossicles may have been transported in from shallower water palaeoenvironments and clusters of ossicles may represent coprolites or regurgitates. Estimates of Early Ordovician palaeogeography that place this site at 30°S or near the palaeoequator are supported by the physiological requirements of the primitive echinoderms described herein. Copyright © 2014 John Wiley & Sons, Ltd.  相似文献   

Electron Temperatures and Flow Speeds of the Low Solar Corona: MACS Results from the Total Solar Eclipse of 29 March 2006 in Libya     

Nelson L. Reginald  Joseph M. Davila  O. C. St. Cyr  Douglas M. Rabin  Madhulika Guhathakurta  Donald M. Hassler  Hadi Gashut 《Solar physics》2011,270(1):235-251

An experiment was conducted in conjunction with the total solar eclipse on 29 March 2006 in Libya to measure both the electron temperature and its flow speed simultaneously at multiple locations in the low solar corona by measuring the visible K-coronal spectrum. Coronal model spectra incorporating the effects of electron temperature and its flow speed were matched with the measured K-coronal spectra to interpret the observations. Results show electron temperatures of (1.10±0.05) MK, (0.70±0.08) MK, and (0.98±0.12) MK, at 1.1 R _⊙ from Sun center in the solar north, east and west, respectively, and (0.93±0.12) MK, at 1.2 R _⊙ from Sun center in the solar west. The corresponding outflow speeds obtained from the spectral fit are (103±92) km s⁻¹, (0+10) km s⁻¹, (0+10) km s⁻¹, and (0+10) km s⁻¹. Since the observations were taken only at 1.1 R _⊙ and 1.2 R _⊙ from Sun center, these speeds, consistent with zero outflow, are in agreement with expectations and provide additional confirmation that the spectral fitting method is working. The electron temperature at 1.1 R _⊙ from Sun center is larger at the north (polar region) than the east and west (equatorial region).  相似文献   

Understanding the mechanisms of formation of nanophase compounds from Stardust: Combined experimental and observational approach     

Neyda M. ABREU  Frans J. M. RIETMEIJER  Joseph A. NUTH III 《Meteoritics & planetary science》2011,46(8):1082-1096

Abstract– We have experimentally produced nanophase sulfide compounds and magnetite embedded in Si‐rich amorphous materials by flash‐cooling of a gas stream. Similar assemblages are ubiquitous, and often dominant components of samples of impact‐processed silica aerogel tiles and submicron grains from comet 81P/Wild 2 were retrieved by NASA’s Stardust mission. Although the texture and compositions of nanosulfide compounds have been reproduced experimentally, the mechanisms of formation of these minerals and their relationship with the surrounding amorphous materials have not been established. In this study, we present evidence that both of these materials may not only be produced through cooling of a superheated liquid but they may have also been formed simultaneously by flash‐cooling and subsequent deposition of a gas dominated by Fe‐S‐SiO‐O₂. In a dust generator at the Goddard Space Flight Center, samples are produced by direct gas‐phase condensation from gaseous precursors followed by deposition, which effectively isolates the effects of gas‐phase reactions from the effects of melting and condensation. High‐resolution transmission electron microscopy images and energy‐dispersive spectroscopy analysis show that these experiments replicate key features of materials from type B and type C Stardust tracks, including textures, distribution of inclusions, nanophase size, and compositional diversity. We argue that gas‐phase reactions may have played a significant role in the capture environment for nanophase materials. Our results are consistent with a potential progenitor assemblage of micron and submicron‐sized sulfides and submicron silica‐bearing phases, which are commonly observed in chondritic interplanetary dust particles and in the matrices of the most pristine chondritic meteorites.  相似文献   

Thermal contraction crack polygons on Mars: A synthesis from HiRISE, Phoenix, and terrestrial analog studies     

Joseph S. Levy  David R. Marchant 《Icarus》2010,206(1):229-216

Thermal contraction crack polygons are complex landforms that have begun to be deciphered on Earth and Mars by the combined investigative efforts of geomorphology, environmental monitoring, physical models, paleoclimate reconstruction, and geochemistry. Thermal contraction crack polygons are excellent indicators of the current or past presence of ground ice, ranging in ice content from weakly cemented soils to debris-covered massive ice. Relative to larger topographic features, polygons may form rapidly, and reflect climate conditions at the time of formation—preserving climate information as relict landforms in the geological record. Polygon morphology and internal textural characteristics can be used to distinguish surfaces modified by the seasonal presence of a wet active layer or dry active layer, and to delimit subsurface ice conditions. Analysis of martian polygon morphology and distribution indicates that geologically-recent thermal contraction crack polygons on Mars form predominantly in an ice-rich latitude-dependent mantle, more likely composed of massive ice deposited by precipitation than by cyclical vapor diffusion into regolith. Regional and local heterogeneities in polygon morphology can be used to distinguish variations in ice content, deposition and modification history, and to assess microclimate variation on timescales of ka to Ma. Analyses of martian polygon morphology, guided by investigations of terrestrial analog thermal contraction crack polygons, strongly suggest the importance of excess ice in the formation and development of many martian thermal contraction crack polygons—implying the presence of an ice-rich substrate that was fractured during and subsequent to obliquity-driven depositional periods and continually modified by ongoing vapor equilibration processes.  相似文献   

A nutrient loading budget for Biscayne Bay, Florida     

Caccia VG  Boyer JN 《Marine pollution bulletin》2007,54(7):994-1008

The water quality in Biscayne Bay has been significantly affected by past and continuing coastal and watershed development. The nutrient concentrations in the Bay have been dramatically changed by the conversion of natural creeks and sheet flow freshwater inputs to rapid and episodic canal inputs from the large and rapidly expanding Miami metropolitan area. This study is an evaluation of nutrient loadings to Biscayne Bay for 1994-2002 from canal, atmospheric, and groundwater sources. Dissolved inorganic nitrogen (DIN, as nitrate, nitrite, and ammonium) and total phosphorus (TP) loadings by the canals were influenced by their geographic locations relative to discharge amount, watershed land use, stormwater runoff, and proximity to landfills. Annual budgets showed that canals contributed the bulk of N loading to the bay as 1687.2 metric ton N yr(-1) (88% total load). Direct atmospheric DIN load for Biscayne Bay was only 231.7 ton N yr(-1), based on surface area. Of the canal DIN load, nitrate+nitrite (NO(x)(-)) loading (1294.5 ton N yr(-1)) made up a much greater proportion than that of ammonium (NH(4)(+), 392.6 ton N yr(-1)). In the urbanized north and central Bay, canal DIN load was evenly split between NO(x)(-) and NH(4)(+). However, in the south, 95% of the DIN load was in the form of NO(x)(-), reflecting the more agricultural land use. Contrary to N, canals contributed the only 66% of P load to the bay (27.5 ton P yr(-1)). Atmospheric TP load was 14 ton Pyr(-1). In the north, canal P load dominated the budget while in the south, atmospheric load was almost double canal load. Groundwater inputs, estimated only for the south Bay, represented an important source of N and P in this zone. Groundwater input of N (141 ton N yr(-1)) was about equal to atmospheric load, while P load (5.9 ton P yr(-1)) was about equal to canal load.  相似文献   

Evolving metasomatic agent in the Northern Andean subduction zone, deduced from magma composition of the long-lived Pichincha volcanic complex (Ecuador)   总被引：1，自引：0，他引：1  

Pablo Samaniego  Claude Robin  Gilles Chazot  Erwan Bourdon  Joseph Cotten 《Contributions to Mineralogy and Petrology》2010,160(2):239-260

Geochemical studies of long-lived volcanic complexes are crucial for the understanding of the nature and composition of the subduction component of arc magmatism. The Pichincha Volcanic Complex (Northern Andean Volcanic Zone) consists of: (1) an old, highly eroded edifice, the Rucu Pichincha, whose lavas are mostly andesites, erupted from 1,100 to 150 ka; and (2) a younger, essentially dacitic, Guagua Pichincha composite edifice, with three main construction phases (Basal Guagua Pichincha, Toaza, and Cristal) which developed over the last 60 ka. This structural evolution was accompanied by a progressive increase of most incompatible trace element abundances and ratios, as well as by a sharp decrease of fluid-mobile to fluid-immobile element ratios. Geochemical data indicate that fractional crystallization of an amphibole-rich cumulate may account for the evolution from the Guagua Pichincha andesites to dacites. However, in order to explain the transition between the Rucu Pichincha andesites and Guagua Pichincha dacites, the mineralogical and geochemical data indicate the predominance of magma mixing processes between a mafic, trace-element depleted, mantle-derived end-member, and a siliceous, trace-element enriched, adakitic end-member. The systematic variation of trace element abundances and ratios in primitive samples leads us to propose that the Rucu Pichincha magmas came from a hydrous-fluid metasomatized mantle wedge, whereas Guagua Pichincha magmas are related to partial melting of a siliceous-melt metasomatized mantle. This temporal evolution implies a change from dehydration to partial melting of the slab, which may be associated with an increase in the geothermal gradient along the slab due to the presence of the subducted Carnegie Ridge at the subduction system. This work emphasizes the importance of studying arc-magma systems over long periods of time (of at least 1 million of years), in order to evaluate the potential variations of the slab contribution into the mantle source of the arc magmatism.  相似文献