Petrogenesis of ultramafic and mafic xenoliths from Mesozoic basanites in southern Sweden: constraints from mineral chemistry     

Tatjana Rehfeldt  Karsten Obst  Leif Johansson 《International Journal of Earth Sciences》2007,96(3):433-450

Jurassic basanite necks occurring at the junction of two major fault zones in Scania contain ultramafic (peridotites, pyroxenites) and mafic xenoliths, which together indicate a diversity of upper mantle and lower crustal assemblages beneath this region. The peridotites can be subdivided into lherzolites, dunites and harzburgites. Most lherzolites are porphyroclastic, containing orthopyroxene and olivine porphyroclasts. They consist of Mg-rich silicates (Mg# = Mg/(Mg + Fe_tot) × 100; 88–94) and vermicular spinel. Calculated equilibration temperatures are lower in porphyroclastic lherzolites (975–1,007°C) than in equigranular lherzolite (1,079°C), indicating an origin from different parts of the upper mantle. According to the spinel composition the lherzolites represent residues of 8–13% fractional melting. They are similar in texture, mineralogy and major element composition to mantle xenoliths from Cenozoic Central European volcanic fields. Dunitic and harzburgitic peridotites are equigranular and only slightly deformed. Silicate minerals have lower to similar Mg# (83–92) as lherzolites and lack primary spinel. Resorbed patches in dunite and harzburgite xenoliths might be the remnants of metasomatic processes that changed the upper mantle composition. Pyroxenites are coarse, undeformed and have silicate minerals with partly lower Mg# than peridotites (70–91). Pyroxenitic oxides are pleonaste spinels. According to two-pyroxene thermometry pyroxenites show a large range of equilibration temperatures (919–1,280°C). In contrast, mafic xenoliths, which are mostly layered gabbronorites with pyroxene- and plagioclase-rich layers, have a narrow range of equilibration temperatures (828–890°C). These temperature ranges, together with geochemical evidence, indicate that pyroxenites and gabbroic xenoliths represent mafic intrusions within the Fennoscandian crust.  相似文献   

海南岛万泉河口沉积物有机碳、 氮同位素的特征及其环境意义^*   总被引：4，自引：0，他引：4  

葛晨东  王颖  T.F.Pedersen  O.Slaymaker 《第四纪研究》2007,27(5):845-852

对海南岛万泉河口沙美内海柱样K3和K4沉积物进行生物地球化学指标总有机碳(TOC)、总氮(TN)、有机碳同位素(δ¹³ C)、氮同位素(δ¹⁵ N)的分析,以及²¹⁰ Pb定年了解其近代变化特征,追踪沉积物有机质来源的变化,提取沉积环境演变及人类活动的信息。K3中TOC的变化介于0.51 ％ ~1.12 ％ ,K4变化介于0.43 ％ ~1.49 ％ ,而其随时间的变化反映了流域内人类活动的历史。17世纪TOC含量明显增加记录了明末清初开始流域内广泛种植农作物的活动,19世纪以来TOC含量逐渐增加,至现代达最高值,对应了工业革命以来人类活动的增强。K3和K4的δ¹³ C值变化分别在-24.38 ‰ ~-21.02 ‰ 之间和-24.74 ‰ ~-20.17 ‰ 之间,δ¹⁵ N值变化分别在2.20 ‰ ~4.62 ‰ 之间和2.39 ‰ ~5.02 ‰ 之间,映证了本区沉积物有机质是陆源物质和海洋物质混合的特点。明末清初开始流域内广泛种植玉米等农作物造成δ¹³ C值增加和δ¹⁵ N值减少; 自19世纪以来至现在,该区的经济活动增加,人口的持续增长,尤其是近50年来化肥农药的大量使用,造成陆源输入的有机碳含量大幅增加,使δ¹³ C值减少和δ¹⁵ N比值增加。 δ¹³ C值自19世纪以来就逐渐变轻,说明陆源和海洋有机碳的比例发生了变化,较轻的陆源有机碳比例相对增加,较重的海洋有机碳比例相对减少,反映了玉带滩沙坝的增长、沙美内海封闭、海水交换作用减少的状况。C/N比值分别从底部的16.19和17.36到顶部减小为11左右,自19世纪以来呈明显减小的趋势也反映了沙美内海泻湖自生的藻类有机质供应越来越多,也说明了其逐渐封闭、水动力条件越来越弱,与外海的交换作用逐渐减少的状况。  相似文献   

Transport,sloughing and settling rates of estuarine macrophytes: Mechanisms and ecological implications     

M.R. Flindt  C.B. Pedersen  C.L. Amos  A. Levy  A. Bergamasco  P.L. Friend 《Continental Shelf Research》2007

The study of plant-bound nutrient transport has been largely neglected in estuaries. Lately however, it has been shown that nutrients bound to macroalgae and seagrasses can constitute a major part of the nutrient transport in shallow tidal estuaries. Organic detritus in estuaries comes from various sources. This paper looks into the source of detritus from sloughing, and the transport behaviour of plant detritus under unidirectional flows. In order to determine the extent of the sloughing of macrophytes, the threshold current velocities for the traction and resuspension of the most common submersed macrophytes in Venice Lagoon (Ulva lactuca, Enteromorpha sp., Ceramium rubrum, Cladophora sp., and Chaetomorpha linum) were studied in a laboratory flume. It was found that all macrophytes subjected to flows of 1.5–3.0 cm s⁻¹ move initially as bed load. The threshold for suspension of the macrophyte tissue was at current speeds >3 cm s⁻¹. The exception was the filamentous macroalgae, C. linum, which moved as bed load at all current speeds. This implies that the advection of plant-bound nutrients in Venice Lagoon is widespread and takes place over virtually all stages of the tide.  相似文献   

Determination of the regularization level of truncated singular-value decomposition inversion: The case of 1D inversion of MT data     

Laust B. Pedersen 《Geophysical Prospecting》2004,52(4):261-270

The total mean‐square error (MSE) of the estimated model, defined as the sum of the standard model variance and the bias variance, is used to define the truncation level of the singular‐value decomposition to give a reasonable balance between model resolution and model variance. This balance is determined largely by the data and no further assumptions are necessary except that the bias terms are estimated sufficiently well. This principle has been tested on the 1D magnetotelluric inverse problem with special emphasis on high‐frequency radio magnetotelluric (RMT) data. Simulations clearly demonstrate that the method provides a good balance between resolution and variance. Starting from a homogeneous half‐space, the best solution is sought for a fixed set of singular values. The model variance is estimated from the sum of the inverse eigenvalues squared, up to a certain threshold, and the bias variance is estimated from the model projections on the remaining eigenvectors. By varying the threshold, the minimum of the MSE is found for an increasing number of fixed singular values until the number of active singular values becomes greater than or equal to the estimated number. As a side‐effect, the depth of penetration of a given set of measurements can be estimated very efficiently by simply noting at which depth the final model deviates little from the starting homogeneous half‐space model. A suite of synthetic data is inverted and an example of inversion of one site is shown to illustrate how the truncation is carried out as the non‐linear inversion process proceeds. A field example with a profile across a plume of contaminated groundwater in the Netherlands shows good agreement with the electrical resistivity obtained in a nearby borehole.  相似文献   

Fluid flow in sedimentary basins: model of pore water flow in a vertical fracture   总被引：2，自引：0，他引：2  

TOM Pedersen  KNUT Bjørlykke 《Basin Research》1994,6(1):1-16

Open fractures provide high-permeability pathways for fluid flow in sedimentary basins. The potential for flow along permeable or open fractures and faults depends on the continuity of flow all the way to the surface except in the case of convective flow. Upward flowing fluid cools and may cause cementation due to the prograde solubility of quartz, but in the case of carbonates such flow may cause dissolution. The rate and duration of these processes depend on the mechanisms for sustaining fluid flow into the fracture, the geometries of fracture and sedimentary beds intersected, permeability, pressure and temperature gradients. Heat loss to the adjacent sediments causes sloping isotherms which can induce non-Rayleigh convection. To analyse these problems we have used a simple model in which a single fracture acts as a pathway for vertically moving fluid and there is no fluid transport across the walls of the fracture except near its inlet and outlet. Four mechanisms for fluid flow into the lower part of the fracture are considered: decompression of pore water; compaction of intersected overpressared sediments; focusing of compaction water derived from sediments beneath the fracture; and finally focusing of pore water moving through an aquifer. Water derived from the basement is not considered here. We find that sustained flow is unlikely to have velocities much higher than 1–100 m/yr, and the flow is laminar. The temperature of the fluid expelled at the top of the fracture increases by less than 1% and the vertical temperature gradient in the fracture remains close to the geothermal gradient. Where hot water is introduced from basement fractures (hydrothermal water) during tectonic deformation, much higher velocities may be sustained in the overlying sediments, but here also this depends on the permeability near the surface. Most of the cooling of water with (ore) mineral precipitation will then occur near the surface. In most cases, pore water decompression and sediment compaction will yield only very limited pore water flux with no significant potential for cementation or heating of the sediments adjacent to the fracture. Focusing of compaction water from sediments beneath the fracture or from an intersected aquifer can yield fluxes high enough to cement an open fracture significantly but the flow must be sustained for a very long time. For velocities of 1–100 m/yr, it takes typically 0.3–30 Myr to cement a fracture by 50%. The highest velocities may be obtained when a fracture extends all the way to the surface or sea floor. When a fracture does not reach the sediment surface, the flow velocity is reduced by the displacement of water in the sediments near the top of the fracture. The flow into the fracture from the sediments may often be rate limiting rather than the flow on the fracture. Sedimentary rocks only a few metres from the fracture will receive a much lower flux than the fracture. The fracture will therefore close due to cementation before significant amounts of silica can be introduced into adjacent sandstones. The isotherm slope in the adjacent sediments will in most cases be less than 10–20°. Non-Rayleigh convection velocities in the sediments adjacent to the fracture are too small to cause any significant diagenetic reactions such as quartz cementation. These quantifications of fluid flow in fractures in sedimentary basins are important in terms of constraining models for diagenesis, heat transport and formation of ore minerals in a compaction-driven system.  相似文献   

Collisional tectonics of the Baltic Shield in the northern Gulf of Bothnia from seismic data of the BABEL project     

Karsten Gohl  Laust B. Pedersen 《Geophysical Journal International》1995,120(1):209-226

  相似文献   

An airborne tensor VLF system. From concept to realization1     

Laust B. Pedersen  Wei Qian  Lars Dynesius  Ping Zhang 《Geophysical Prospecting》1994,42(8):863-883

Radio signals from very low frequency (VLF) transmitters distributed world-wide have been used for several decades to study the lateral variations of the electrical conductivity in the upper few hundred metres of the earth's crust. Traditionally, in airborne applications, the total magnetic fields from one or two transmitters are measured to form the basis for construction of maps that primarily show those conductive structures that are parallel or subparallel to the direction to the transmitters. The tensor VLF technique described in this paper makes use of all signals available in a predefined frequency band to construct transfer functions relating the vertical magnetic field and the two horizontal magnetic field components. These transfer functions are uniquely determined for a particular measuring site and contain information about the lateral conductivity variations in all directions. First experiences with real field data, acquired during a test survey in Sweden, show that maps of the so-called peaker, the spatial divergence of the transfer functions, give an image of the conducting structures. Most of the structures can be correlated to small valleys filled with conducting sediments or valleys underlain by conductive fracture zones in the crystalline rocks.  相似文献   

A palynological and sedimentological study of Cretaceous floodplain deposits of the Atane Formation at Skansen and Igdlunguaq, Disko, West Greenland     

Eva Bundgaard Koppelhus  Gunver Krarup Pedersen 《Cretaceous Research》1993,14(6)

A palynological and sedimentological study has been carried out on the Cretaceous fluvial and deltaic Atane Formation of West Greenland. Two localities, Skansen and Igdlunguaq on the southern coast of Disko island, have been studied. The sediments are divided into two genetic facies associations interpreted as representing deposition in fluvial channels and on a floodplain. The facies indicate that most of the sediments on the floodplain accumulated in swamps or shallow lakes, whereas abundant spores and pollen indicate the presence of vegetated land nearby. The palynomorph assemblages recovered consist of 72 species of spores and pollen grains of bryophytes, pteridophytes, gymnosperms and angiosperms. The palynomorphs from Skansen and most of those from Igdlunguaq indicate a maximum age-range from late Albian to Cenomanian for the successions sampled, although a mid Cenomanian age seems most likely. The highest horizon examined at Igdlunguaq may, however, be late Cenomanian or Turonian in age. The assemblages compare well with palynofloras from North America and Northwest Europe.  相似文献   

Channelling contribution to tipper vectors: a magnetic equivalent to electrical distortion   总被引：2，自引：0，他引：2  

Ping Zhang  Laust B. Pedersen  Marianne Mareschal  Michel Chouteau 《Geophysical Journal International》1993,113(3):693-700

  相似文献   

Three‐dimensional modelling of magnetotelluric data to image Sehqanat hydrocarbon reservoir in southwestern Iran          下载免费PDF全文

I. Mansoori  L.B. Pedersen  R. Javaheri 《Geophysical Prospecting》2016,64(3):753-766

A detailed magnetotelluric survey was conducted in 2013 in the Sehqanat oil field, southwestern Iran to map the geoelectrical structures of the sedimentary Zagros zone, particularly the boundary between the Gachsaran Formation acting as cap rock and the Asmari Formation as the reservoir. According to the electrical well logs, a large resistivity contrast exists between the two formations. The Gachsaran Formation is formed by tens to hundreds of metres of evaporites and it is highly conductive (ca. 1 Ωm–10 Ωm), and the Asmari Formation consists of dense carbonates, which are considerably more resistive (more than 100 Ωm). Broadband magnetotelluric data were collected along five southwest–northeast directed parallel lines with more than 600 stations crossing the main geological trend. Although dimensionality and strike analysis of the magnetotelluric transfer functions showed that overall they satisfied local 2D conditions, there were also strong 3D conditions found in some of the sites. Therefore, in order to obtain a more reliable image of the resistivity distribution in the Sehqanat oil field, in addition to standard 2D inversion, we investigated to what extent 3D inversion of the data was feasible and what improvements in the resistivity image could be obtained. The 2D inversion models using the determinant average of the impedance tensor depict the main resistivity structures well, whereas the estimated 3D model shows significantly more details although problems were encountered in fitting the data with the latter. Both approaches resolved the Gachsaran–Asmari transition from high conductivity to moderate conductivity. The well‐known Sehqanat anticline could also be delineated throughout the 2D and 3D resistivity models as a resistive dome‐shaped body in the middle parts of the magnetotelluric profiles.  相似文献