Geochemical Characteristics,Origin, and Evolution of Ore‐Forming Fluids of the Khut Copper Skarn Deposit,West of Yazd in Central Iran     

Azam Zahedi  Mohammad Boomeri  Kazuo Nakashima  Mohammad Ali Mackizadeh  Masao Ban  David R. Lentz 《Resource Geology》2014,64(3):209-232

The Khut copper skarn deposit is located at about 50 km northwest of Taft City in Yazd province in the middle part of the Urumieh‐Dokhtar magmatic arc. Intrusion of granitoid of Oligocene–Miocene age into carbonate rocks of the Triassic Nayband Formation led to the formation of marble and a calcic skarn. The marble contains high grade Cu mineralization that occurs mainly as open space filling and replacement. Cu‐rich sulfide samples from the mineralized marble are also anomalous in Au, Zn, and Pb. In contrast, the calcic skarn is only weakly anomalous in Cu and W. The calcic skarn is divided into garnet skarn and garnet–pyroxene skarn zones. Paragenetic relationships and microthermometric data from fluid inclusions in garnet and calcite indicate that the compositional evolution of skarn minerals occurred in three main stages as follows. (i) The early prograde stage, which is characterized by Mg‐rich hedenbergite (Hd_53.7Di_42.3–Hd_86.1Di_9.5) with Al‐bearing andradite (69.8–99.5 mol% andradite). The temperature in the early prograde skarn varies from 400 to 500°C at 500 bar. (ii) The late prograde stage is manifested by almost pure andradite (96.2–98.4 mol% andradite). Based on the fluid inclusion data from garnet, fluid temperature and salinity in this stage is estimated to vary from 267 to 361°C and from 10.1 to 21.1 wt% NaCl equivalent, respectively. Pyrrhotite precipitation started during this stage. (iii) The retrograde stage occurs in an exoskarn, which consists of an assemblage of ferro‐actinolite, quartz, calcite, epidote, chlorite, sphalerite, pyrite, and chalcopyrite that partially replaces earlier mineral assemblages under hydrostatic conditions during fracturing of the early skarn. Fluids in calcite yielded lower temperatures (T < 260°C) and fluid salinity declined to ～8 wt% NaCl equivalent. The last stage mineralization in the deposit is supergene weathering/alteration represented by the formation of iron hydroxide, Cu‐carbonate, clay minerals, and calcite. Sulfur isotope data of chalcopyrite (δ³⁴S of +1.4 to +5.2‰) show an igneous sulfur source. Mineralogy and mineral compositions of the prograde assemblage of the Khut skarn are consistent with deposition under intermediately oxidized and slightly lower fS₂ conditions at shallow crustal levels compared with those of other typical Fe‐bearing Cu–Au skarn systems.  相似文献   

Spatiotemporal variations of Jurassic–Cretaceous magmatism in eastern Asia (Tan‐Lu Fault to SW Japan): evidence for flat‐slab subduction and slab rollback     

Kazuo Kiminami  Teruyoshi Imaoka 《地学学报》2013,25(5):414-422

Here, we examine spatiotemporal variations of Jurassic–Cretaceous magmatism along a c. 1000‐km transect across eastern Asia, including SW Japan, the Korean, Jiaodong and Liaodong peninsulas, and eastern Jilin Province. Integration of tectonic regime data with age data from igneous rocks in eastern Asia (from the Tan‐Lu Fault to SW Japan) suggests a shallowing of the subduction angle and subsequent flat‐slab subduction during the Jurassic, and slab rollback during the Early Cretaceous. The combination of a subducting plateau and root‐enhanced suction provides the best explanation for the flat‐slab subduction. In the final stage (Albian) of slab rollback, the geotectonic setting changed from subduction–accretion to a continental arc in the area close to the ancient trench (i.e. the Inner Zone of SW Japan).  相似文献   

Dynamics of pelagic variables in two contrasting coastal systems in the western Hokkaido coast off Otaru port,Japan     

Julius I. Agboola  Mario Uchimiya  Isao Kudo  Kazuo Kido  Masato Osawa 《Estuarine, Coastal and Shelf Science》2010,86(3):477-484

Human impact on adjacent coastal waters, leading to alteration in nutritional environment and hence affecting phytoplankton biomass (Chlorophyll a), will probably be enhanced by the nearby presence of ports. The main goal of this study is to assess the influence of nearby presence of port on phytoplankton biomass build-up and the physical–chemical environmental characteristics in two contrasting coastal systems (Otaru port, S-IN and an exposed coastal area, S-OUT) in the western Hokkaido coast off Otaru port, Japan. Sampling was conducted on “bi-weekly and monthly” basis during the period of September 2006–December 2007 and data comprising 11 pelagic variables were obtained. In most instance, phytoplankton biomass, nutrients' (NH₄, NO₃, PO₄, and Si(OH)₄) concentrations and nutrients' molar ratios were higher at the Otaru port location. Physical parameters (temperature, salinity, hydrogen ion concentration (pH), photosynthetically active radiation (PAR) and dissolved oxygen, (DO)) were not significantly different (P > 0.05) between the two locations. With the exception of salinity, pH and DIC, all variables measured showed significant variation (P < 0.05) with season. While the coefficient of variation (CV) of physical parameters and phytoplankton biomass were relatively higher in Otaru port location (S-IN), the exposed coastal location (S-OUT) showed a higher variation in chemical parameters. Other variables showed different patterns between the two locations. We conclude that ports, due to its activities and restricted circulation favour high nutrient loading and phytoplankton biomass build-up in adjacent coastal systems, thus, suggesting the need for continuous field observation data in order to advance our knowledge on possible future human impact on coastal environment and the need to monitor and control port activities.  相似文献   

Transformation between surface spherical harmonic expansion of arbitrary high degree and order and double Fourier series on sphere     

Toshio Fukushima 《Journal of Geodesy》2018,92(2):123-130

In order to accelerate the spherical harmonic synthesis and/or analysis of arbitrary function on the unit sphere, we developed a pair of procedures to transform between a truncated spherical harmonic expansion and the corresponding two-dimensional Fourier series. First, we obtained an analytic expression of the sine/cosine series coefficient of the \(4 \pi \) fully normalized associated Legendre function in terms of the rectangle values of the Wigner d function. Then, we elaborated the existing method to transform the coefficients of the surface spherical harmonic expansion to those of the double Fourier series so as to be capable with arbitrary high degree and order. Next, we created a new method to transform inversely a given double Fourier series to the corresponding surface spherical harmonic expansion. The key of the new method is a couple of new recurrence formulas to compute the inverse transformation coefficients: a decreasing-order, fixed-degree, and fixed-wavenumber three-term formula for general terms, and an increasing-degree-and-order and fixed-wavenumber two-term formula for diagonal terms. Meanwhile, the two seed values are analytically prepared. Both of the forward and inverse transformation procedures are confirmed to be sufficiently accurate and applicable to an extremely high degree/order/wavenumber as \(2^{30}\,{\approx }\,10^9\). The developed procedures will be useful not only in the synthesis and analysis of the spherical harmonic expansion of arbitrary high degree and order, but also in the evaluation of the derivatives and integrals of the spherical harmonic expansion.  相似文献   

Coronal Mass Ejections Observed at the Total Solar Eclipse on 13 November 2012     

Yoichiro Hanaoka  Jun Nakazawa  Osamu Ohgoe  Yoshiaki Sakai  Kazuo Shiota 《Solar physics》2014,289(7):2587-2599

White-light observations of the total solar eclipse on 13 November 2012 were made at two sites, where the totality occurred 35 min apart. The structure of the corona from the solar limb to a couple of solar radii was observed with a wide dynamic range and a high signal-to-noise ratio. An ongoing coronal mass ejection (CME) and a pre-CME loop structure just before the eruption were observed in the height range between 1?–?2 R_⊙. The source region of CMEs was revealed to be in this height range, where the material and the magnetic field of CMEs were located before the eruption. This height range includes the gap between the extreme ultraviolet observations of the low corona and the spaceborne white-light observations of the high corona, but the eclipse observation shows that this height range is essential for the study of CME initiation. The eclipse observation is basically just a snapshot of CMEs, but it indicates the importance of a continuous coverage of CME observations in this height range in the future.  相似文献   

A method solving kepler's equation without transcendental function evaluations     

Toshio Fukushima 《Celestial Mechanics and Dynamical Astronomy》1996,66(3):309-319

We developed two approximations of the Newton-Raphson method. The one is a sort of discretization, namely to search an approximate solution on pre-specified grid points. The other is a Taylor series expansion. A combination of these was applied to solving Kepler's equation for the elliptic case. The resulting method requires no evaluation of transcendental functions. Numerical measurements showed that, in the case of Intel Pentium processor, the new method is three times as fast as the original Newton-Raphson method. Also it is more than 2.5 times as fast as Halley's method, Nijenhuis's method, and others.  相似文献   

Polar magnetic substorms     

Naoshi Fukushima 《Planetary and Space Science》1972

From the world distribution of geomagnetic disturbance, the connection between the electric current in the ionosphere, the field-aligned current and asymmetric equatorial ringcurrent in the magnetosphere is discussed. The partial ring-current in the afternoon-evening region, whose intensity is closely correlated with the AE-index, usually develops and decays earlier than the symmetric ring-current in the course of magnetic storms. The partial ringcurrent seems to have a direct connection with the positive geomagnetic bay in high latitudes in the evening hours through the ionizing effect of the particles leaking from the partial ringcurrent. The dawn-to-dusk electric field in the magnetospheric tail is transferred to the polar ionosphere, producing there the twin vortex Hall current responsible for polar cap geomagnetic variation. The magnetic effect of the associated Pedersen current in the ionosphere is shown to be small but still worth considering. The electrojet near midnight along the auroral oval is thought to appear when the electric conductivity of the ionosphere is locally increased under the presence of large scale dawn-to-dusk electric field. The occasional appearance of a localized abnormal geomagnetic disturbance with reversed direction near the geomagnetic pole seems to suggest the occasional reversal of electric field near the outer surface of the magnetospheric tail, especially when the interplanetary magnetic field is northward.  相似文献   

The Miduk porphyry Cu deposit,Kerman, Iran: A geochemical analysis of the potassic zone including halogen element systematics related to Cu mineralization processes   总被引：1，自引：0，他引：1  

Mohammad Boomeri  Kazuo Nakashima  David Richard Lentz 《Journal of Geochemical Exploration》2009

Miduk hypogene and supergene porphyry Cu–Mo mineralization occurs within the Miocene porphyritic quartz–diorite and host Eocene plagioclase–hornblende phyric andesitic pyroclastic and flow sequence. Both the host rocks were extensively altered by hydrothermal fluids to dominantly potassic, phyllic, and argillic with interstitial to distal propylitic types.  相似文献   

Calibration and validation of the ocean color version-3 product from ADEOS OCTS     

Masanobu Shimada  Hiromi Oaku  Yasushi Mitomi  Hiroshi Murakami  Akira Mukaida  Yasuhisa Nakamura  Joji Ishizaka  Hiroshi Kawamura  Tasuku Tanaka  Motoaki Kishino  Hajime Fukushima 《Journal of Oceanography》1998,54(5):401-416

We present calibration and validation results of the OCTS’s ocean color version-3 product, which mainly consists of the chlorophyll-a concentration (Chl-a) and the normalized water-leaving radiance (_nL_w). First, OCTS was calibrated for the inter-detector sensitivity difference, offset, and absolute sensitivity using external calibration source. It was also vicariously calibrated using in-situ measurements for water (Chl-a and_nL_w) and atmosphere (optical thickness), which were acquired synchronously with OCTS under cloud-free conditions. Second, the product was validated using selected 17 in-situ Chl-a and 11 in-situ_nL_w measurements. We confirmed that Chl-a was estimated with an accuracy of 68% for Chl-a less than 2 mg/m³, and_nL_w from 94% (band 2) to 128% (band 4). Geometric accuracy was improved to 1.3 km. Stripes were significantly reduced by modifying the detector normalization factor as a function of input radiance.  相似文献   

Correction of atmospheric effect on ADEOS/OCTS ocean color data: Algorithm description and evaluation of its performance     

Hajime Fukushima  Akiko Higurashi  Yasushi Mitomi  Teruyuki Nakajima  Toshimitsu Noguchi  Toshio Tanaka  Mitsuhiro Toratani 《Journal of Oceanography》1998,54(5):417-430

This paper first describes the atmospheric correction algorithm for OCTS visible band data used at NASDA/EOC. Sharing a basic structure with Gordon and Wang’s Sea WiFS algorithm, it uses 10 candidate aerosol models including the “Asian dust model” introduced in consideration of the unique feature of aerosols over the east Asian waters. Based on the observations at 670 and 865 nm bands, the algorithm selects a pair of aerosol models that account best for the observed spectral reflectances, and synthesizes the aerosol reflectance used for the atmospheric correction. Two different schemes for determining the value of the parameter for the aerosol model selection are presented and their anticipated estimation error is analyzed in terms of retrieved water reflectance at 443 nm. The results of our numerical simulation show that the standard deviation of the estimation error of the “weighted average” scheme is mostly within the permissible level of ±0.002, reducing the error by 18% on average compared to the “simple average” scheme. The paper further discusses the expected error under the old CZCS-type atmospheric correction, which assumes constant aerosol optical properties throughout the given image. Although our algorithm has a better performance than the CZCS algorithm, further analysis shows that the error induced by the assumption taken in the algorithm that the water-leaving radiance at 670 nm band is negligibly small may be large in high pigment concentration waters, indicating the necessity for future improvements.  相似文献