排序方式： 共有47条查询结果，搜索用时 15 毫秒
31.
Dunes and bars are common elements in tide‐dominated shelf settings. However, there is no consensus on a unifying terminology or a systematic classification for thick sets of cross‐stratified sandstones. In addition, their ichnological attributes have hardly been explored. To address these issues, the properties, architecture and ichnology of compound cross‐stratified sandstone bodies contained in the Lower Cambrian Gog Group of the southern Canadian Rocky Mountains are described here. In these transgressive sandstones, five types of compound cross‐stratified sandstone are distinguished based on foreset geometry, sedimentary structures and internal heterogeneity. These represent four broad categories of subtidal sandbodies: (i) compound‐dune fields; (ii) sand sheets; (iii) sand ridges; and (iv) isolated dune patches; tidal bars comprise a fifth category but are not present in the Gog Group. Compound‐dune fields are characterized by sigmoidal and planar cross‐stratified sandstone in coarsening‐upward and thickening‐upward packages (Type 1); these are mostly unburrowed, or locally contain representatives of the Skolithos ichnofacies, but are intercalated with intensely bioturbated sandstone containing the archetypal Cruziana ichnofacies. Sand‐sheet complexes, also composed of compound dunes, cover more extensive subtidal areas, and comprise three adjacent subenvironments: core, front and margin. The core is characterized by thick‐bedded sets of cross‐stratified sandstone (Type 2). A decrease of bedform size at the front is recorded by wedges of thinner‐bedded, low‐angle and planar cross‐stratified sandstone (Type 3) exhibiting dense Skolithos pipe‐rock ichnofabric. The margin is characterized by interbedded sandstone and mudstone, and hummocky cross‐stratified sandstone. Sand‐sheet deposits exhibit clear trends in trace‐fossil distribution along the sediment transport path, from non‐bioturbated beds in the core to Skolithos ichnofacies at the front, and a depauperate Cruziana ichnofacies at the margin. Tidal sand ridges are large elongate sandbodies characterized by large sigmoid‐shaped reactivation surfaces (Type 4). Sand ridges display clear ichnological trends perpendicular to the axis of the ridge, with no bioturbation or a poorly developed Skolithos ichnofacies in the core, a depauperate Cruziana ichnofacies in lee‐side deposits, and Cruziana ichnofacies at the margin. While both tidal ridges and tidal bars migrate by means of lateral accretion, the latter occur in association with channels while the former do not. Because tidal bars tend to occur in brackish‐water marginal‐marine settings, their ichnofauna are typically of low diversity, representing a depauperate Cruziana ichnofacies. Isolated dune patches developed on sand‐starved areas of the shelf, and are represented by lenticular sandbodies with sigmoidal reactivation surfaces (Type 5); they typically lack trace fossils, but the interfingering muddy deposits are intensely bioturbated by a high‐diversity fauna recording the Cruziana ichnofacies. The variety of sandbody types in the Gog Group reflects varying sediment supply and location on the inner continental shelf. These, in turn, governed substrate mobility, grain size, turbidity, water‐column productivity and sediment organic matter which controlled trace fossil distribution. 相似文献
32.
Elemental, isotopic, and mineral compositions as well as rocktextures were examined in samples from Popocatépetl volcanoand immediately surrounding monogenetic scoria cones of theSierra Chichinautzin Volcanic Field, central Mexico. Magma generationis strongly linked to the active subduction regime to the south.Rocks range in composition from basalt to dacite, but Popocatépetlsamples are generally more evolved and have mineral compositionsand textures consistent with more complicated, multi-stage evolutionaryprocesses. High-Mg calc-alkaline and more alkaline primitivemagmas are present in the monogenetic cones. Systematic variationsin major and trace element compositions within the monogeneticsuite can mostly be explained by polybaric fractional crystallizationprocesses in small and short-lived magmatic systems. In contrast,Popocatépetl stratovolcano has produced homogeneous magmacompositions from a shallow, long-lived magma chamber that isperiodically replenished by primitive basaltic magmas. The currenteruption (1994–present) has produced silicic dome lavasand pumice clasts that display mingling of an evolved daciticcomponent with an olivine-bearing mafic component. The longevityof the magma chamber hosted in Cretaceous limestones has fosteredinteraction with these rocks as evidenced by the chemical andisotopic compositions of the different eruptive products, contact-metamorphosedxenoliths, and fumarolic gases. Popocatépetl volcanicproducts display a considerable range of 87Sr/86Sr (0·70397–0·70463)and Nd (+6·2 to +3·0) whereas Pb isotope ratiosare relatively homogeneous (206Pb/204Pb 18·61–18·70;207Pb/204Pb 15·56–15·60). KEY WORDS: Popocatépetl; Sierra Chichinautzin Volcanic Field; arc petrogenesis; radiogenic isotopes 相似文献
33.
Fluid-absent melting experiments on a zoisite- and phengite-bearingeclogite (omphacite, garnet, quartz, kyanite, zoisite, phengiteand rutile) were performed to constrain the melting relationsof these hydrous phases in natural assemblages, as well as themelt and mineral compositions produced by their breakdown. From1·0 to 3·2 GPa the solidus slopes positively from1·5 GPa at 850°C to 2·7 GPa at 1025°C,but bends back at higher pressures to 975°C at 3·2GPa. The melt fraction is always low and the melt compositionsalways felsic and become increasingly so with increasing pressure.The normative Ab–An–Or compositions of the initialmelts vary from tonalites at 1·0 GPa to tonalite–trondhjemitesat 1·5 GPa, adamellites at 2·1 and 2·7GPa, and to true granites at 3·2 GPa. At pressures < 相似文献
34.
We present results of dehydration melting experiments [3–15kbar, 810–950C f(O2) QFM (quartz-fayalite-magetite)and Ni-NiO] on two Fe-rich mixtures of biotite (37%), plagioclaseAn38 (27%), quartz (34%) and ilmenite (2%), which differ onlyin their biotite compositions (mg-number 23 and 0.4). Dehydrationmelting of metagreywackes of constant modal composition generatesa wide range of melt fractions, melt compositions and residualassemblages, through the combined effects of pressure, Fe/Mgratio and f(O2). Crystallization of garnet is the chief controlon melting behavior, and is limited by two reactions: (1) thebreakdown of garnet + quartz to orthopyroxene + plagioclaseat low P, and (2) the oxidation of garnet to magnetite + anorthite+ quartz (enstatite), which is sensitive to both f(O2) andP. Because of these reactions, melting of Mg-rich metagreywackesis rather insensitive to f(O2) but strongly sensitive to P;the converse is true for Fe-rich metagreywackes. Garnet crystallizationrequires that plagioclase break down incongruently, liberatingalbite. This increases the Na2O content of the melts and enhancesmelt production. Thus, melting of metagreywacke in a reducingdeep-crustal environment (with garnet stable) would producemore, and more sodic, melt than would garnet-absent meltingof the same source material in a relatively oxidizing, shallow-crustalenvironment. KEY WORDS: anatexis; metasediments; gneisses; granites; garnet
*Corresponding author. Telephone: 706-542-2394; fax: 706-542-2425; e-mail: alpatino{at}uga.cc.uga.edu 相似文献
35.
This study examines the sedimentary response to a tectonically driven relative sea‐level fall that occurred in the Neuquén Basin, west‐central Argentina, during the late Early Valanginian (Early Cretaceous). At this time the basin lay behind the emergent Andean magmatic arc to the west. Following the relative sea‐level fall, sedimentation was limited to the central part of the Neuquén Basin, with the deposition of a predominantly clastic, continental to shallow marine wedge on top of basinal black shales. This lowstand wedge is called the Mulichinco Formation and consists of a third‐order sequence that lasted about 2 Myr and contains high frequency lowstand, transgressive, and highstand deposits. Significant variations in facies, depositional architecture, and internal organization of the sequence occur along depositional strike. These variations are attributed mainly to tectonic and topographic controls upon sediment flux, basin gradient, fault tilting, and shifting of the depocentre through time. These controls were ultimately related to asymmetrically distributed tectonic activity that was greater towards the magmatic arc in the west. The superposition of fluvial deposits directly upon offshore facies provides unequivocal evidence for a sequence boundary at the base of the Mulichinco Formation. However, the Mulichinco sequence boundary is marked by shallow, low erosional relief and widespread fluvial deposition. The surface lacks prominent valleys traditionally associated with sequence boundaries. This non‐erosive sequence boundary geometry is attributed to the ramp‐type geometry of the basin and/or rapid uplift that limited stratigraphic adjustment to base‐level fall. Significant along‐strike facies changes and a low‐relief sequence boundary are attributes that may be common in tectonically active, semi‐enclosed basins (e.g. shallow back‐arc basins, foreland basins). 相似文献
36.
The quantification and prediction of damage due to different seismic actions to structure types of different strength is an important problem not yet solved in the Earthquake Engineering field. In addition, owing to the fact that macroseismic information cannot be used directly in dynamic calculations, a new problem appears when these are the only kind of data available. Thus, there is a need to estimate a parameter to relate the energy of the ground motion and the damage occurrence, and eventually achieve a better seismic risk assessment. After the study and review of some representative potential damage parameters, attention has been paid to the Arias intensity (unfiltered and filtered in certain frequency ranges) and the Cumulative Absolute velocity (CAV) as the parameters to evaluate the energy of movement, and to relate them with the observed damage. The data used to infer these correlations have been provided by the ENEA-ENEL (Italy). The information consists of strong motion records from the Campano Lucano (1980), Umbria (1984) and Lazio-Abruzzo (1984) earthquakes, and data of damage to buildings in the vicinity of recording instruments (within a maximum radius of 300 m, where the soil conditions remain constant). In this paper, some relations have been obtained to quantify the damage level for different seismic inputs. The results suggest that unfiltered Arias intensity and CAV (for calculation threshold 20 cm/s2) correlate well with the macroseismic information used. Best fits are obtained between the quoted parameters and the observed damage in type A structures. © 1997 by John Wiley & Sons, Ltd. 相似文献
37.
RAFFAELE DI CUIA ALBERTO RIVA ANDREA SCIFONI ALESSANDRO MORETTI CHRISTOPH SPÖTL BRUNO CALINE 《Sedimentology》2011,58(6):1347-1369
A multidisciplinary study, conducted over the carbonate platform deposits of the Liassic Calcari Grigi Group (Southern Alps), highlighted how the use of outcrop analogues can contribute to better define the distribution of dolomitic bodies related to fault networks, to characterize the petrophysical properties of the dolomitic sequence and unravel a complex diagenetic history. This study was carried out in the Asiago Plateau (southernmost part of the eastern Southern Alps, northern Italy) which provides excellent outcrops of the Jurassic Calcari Grigi Group. The dolomitization of the Jurassic sequence is variable in terms of stratigraphic extension and geographic distribution. In the studied localities the dolomitization is generally limited to the Mount Zugna Formation and is characterized by an undulatory front, with ‘sub‐vertical dolomitic chimneys’ along the major faults. Within this unit, and often associated with faults, stacked high‐porosity and permeability bed‐parallel dolomitic bodies are developed that show excellent petrophysical properties. The dolomitic intervals are characterized by pervasive unimodal and patchy polymodal dolomite crystals. Thin section, cathodoluminescence, isotopic and fluid inclusion analyses were used to constrain the paragenetic evolution of the sequence which is similar in all the studied localities. The first dolomitization stage is marked by zoned dolomite crystals with a dull luminescent core. The porosity is thought to have increased after this stage, with dark blue luminescent dolomite accompanied by the corrosion of older crystals. The appearance of saddle dolomite marks the onset of the porosity reduction stage, ending with the infilling of vugs and the remaining open pores with calcite cement. The diagenetic evolution locally stopped at the saddle dolomite stage with the complete occlusion of the remaining pores. Paragenetic and fluid‐inclusion data suggest an evolutionary trend of increasing temperatures and decreasing salinity toward brackish fluids responsible for dolomite and calcite precipitation. The integration of the available data seem to indicate that the diagenetic evolution of the study area is related to: (i) the interplay between evolving fluids (from marine to brackish); (ii) the burial of the sequence (increasing temperature); and (iii) the evolution of the hydrogeological system (fault and fracture network, fluid mixing). This complex paragenetic evolution is strongly linked to the evolution of the porosity framework that evolved from a good, widespread network in the early stages of the burial history to a confined system in the later stages due to reduction of porosity by the deposition of late calcite and dolomite cements. 相似文献
38.
Nummulites, a particularly abundant and diverse genus of larger benthonic foraminifera, formed huge accumulations (banks) during the Eocene, which are often good hydrocarbon reservoirs, especially in North Africa. Despite their economical interest, these accumulations are not well‐understood and their origin is still under discussion. Reasons for this debate are the absence of living Nummulites accumulations and the high‐variability of facies, including the size, shape and extension of the banks, which reflect the array of processes controlling sediment production and accumulation. The nummulitic banks near Santa María de Buil, in the Ainsa Basin (South Pyrenean Foreland Basin) are composed of recurrent facies associations within mappable bed units bounded by physical surfaces. The depositional processes that produced the Nummulites deshayesi accumulations are interpreted considering the shape of the banks, the type of bounding surfaces, the distribution of sedimentary textures, Nummulites test shapes and the associated skeletal components within the banks. This integrative analysis indicates that nummulitic banks accumulated from mass flows, with very poor sediment sorting. Textural and compositional differences among banks suggest that globose Nummulites thrived in the shallower part of the mesophotic zone with abundant nummulithoclasts, whereas flat nummulitic forms thrived in deeper mesophotic, clay‐dominated settings. Interbedded with nummulitic banks, coral biostromes and coral mounds bearing Operculina, Discocyclina and Asterocyclina, represent in situ accumulation near the base of the photic zone. Internal waves (waves that propagate along the pycnocline) are thought to be the triggering mechanism for the density flows. Internal waves and induced bottom currents are sporadic but strong enough to bring sediments into suspension. In contrast to surface waves (both fair‐weather and storm), whose impact is strongest near the sea surface and decreases with bathymetry, the impact of internal waves is usually strongest in the mid‐shelf region and weaker in shallow water. This explains the compositional character of the nummulitic banks. 相似文献
39.
This study focuses on storm deposits in the Muschelkalk facies of the Betic Cordillera (southern Spain) and interprets their deposition mechanisms. Three types of storm deposit are distinguished: (i) pot/gutter casts; (ii) tempestite beds; and (iii) storm‐winnowed deposits. Each deposit provides information about the carbonate platform environment in which it was deposited. The tempestite models proposed are: (i) the bypass‐zone tempestite model, occurring in a muddy ramp at the epicontinental basin margin. This model is characterized by potholes and gutters that form in a shoreline bypass‐zone during storms; (ii) the gradient‐current tempestite model in which frequent tempestite beds are related to storm gradient currents. Thickness and grain size decrease towards the deep distal ramp; and (iii) the winnowed deposit tempestite model whereby storm deposits are winnowed and deposited in the same environment with only short lateral transport having occurred. This model evokes more restricted and shallower conditions, lagoons or inland seas. The distribution of all these deposits in the stratigraphic sections studied corroborate the eustatic third‐order cycle identified, although the different features of the storm deposits and their positions in each section indicate a subsidence varying in time and space. In the transgressive stage, the margins of the epicontinental basin were a well‐developed ramp with potholes and gutters. In contrast, during the high sea‐level stage, storm deposits generated tempestite beds or storm‐winnowed deposits in the different areas. The epicontinental carbonate platform with ramp edges evolved into a complex depositional system of coastal and shallow‐marine environments with lagoons and restricted inland seas. Thus, the epicontinental platform underwent substantial change from the Late Anisian to the Late Ladinian and this is reflected in its storm deposits. 相似文献
40.
ALBERTO V. REYES GRANT D. ZAZULA SVETLANA KUZMINA THOMAS A. AGER DUANE G. FROESE 《第四纪科学杂志》2011,26(3):345-352
Last interglacial sediments in unglaciated Alaska and Yukon (eastern Beringia) are commonly identified by palaeoecological indicators and stratigraphic position ～2–5 m above the regionally prominent Old Crow tephra (124 ± 10 ka). We demonstrate that this approach can yield erroneous age assignments using data from a new exposure at the Palisades, a site in interior Alaska with numerous exposures of last interglacial sediments. Tephrochronology, stratigraphy, plant macrofossils, pollen and fossil insects from a prominent wood‐rich organic silt unit are all consistent with a last interglacial age assignment. However, six 14C dates on plant and insect macrofossils from the organic silt range from non‐finite to 4.0 14C ka BP, indicating that the organic silt instead represents a Holocene deposit with a mixed‐age assemblage of organic material. In contrast, wood samples from presumed last interglacial organic‐rich sediments elsewhere at the Palisades, in a similar stratigraphic position with respect to Old Crow tephra, yield non‐finite 14C ages. Given that local permafrost thaw since the last interglaciation may facilitate reworking of older sediments into new stratigraphic positions, minimum constraining ages based on 14C dating or other methods should supplement age assignments for last interglacial sediments in eastern Beringia that are based on palaeoecology and stratigraphic association with Old Crow tephra. Copyright © 2011 John Wiley & Sons, Ltd. 相似文献