SESTET: A spatially explicit stream temperature model based on equilibrium temperature     

Luca Carraro  Marco Toffolon  Andrea Rinaldo  Enrico Bertuzzo 《水文研究》2020,34(2):355-369

Stream-water temperature is a key variable controlling chemical, biological, and ecological processes in freshwater environments. Most models focus on a single river cross-section; however, temperature gradients along stretches and tributaries of a river network are crucial to assess ecohydrological features such as aquatic species suitability, growth and feeding rates, or disease transmission. We propose SESTET, a deterministic, spatially explicit stream temperature model for a whole river network, based on water and energy budgets at a reach scale and requiring only commonly available spatially distributed datasets, such as morphology and air temperature, as input. Heat exchange processes at the air–water interface are modelled via the widely used equilibrium temperature concept, whereas the effects of network structure are accounted for through advective heat fluxes. A case study was conducted on the prealpine Wigger river (Switzerland), where water temperatures have been measured in the period 2014–2018 at 11 spatially distributed locations. The results show the advantages of accounting for water and energy budgets at the reach scale for the entire river network, compared with simpler, lumped formulations. Because our approach fundamentally relies on spatially distributed air temperature fields, adequate spatial interpolation techniques that account for the effects of both elevation and thermal inversion in air temperature are key to a successful application of the model. SESTET allows the assessment of the magnitude of the various components of the heat budget at the reach scale and the derivation of reliable estimates of spatial gradients of mean daily stream temperatures for the whole catchment based on a limited number of conveniently located (viz., spanning the largest possible elevation range) measuring stations. Moreover, accounting for mixing processes and advective fluxes through the river network allows one to trust regionalized values of the parameters controlling the relationship between equilibrium and air temperature, a key feature to generalize the model to data-scarce catchments.  相似文献   

Direct Conversion of Food Waste into 3D Porous Carbon Traps for Selective Adsorption of Cationic Dyes     

Anitha Senthamizhan  Brabu Balusamy  Doriana Debellis  Jose Alejandro Heredia-Guerrero  Giorgio Mancini  Riccardo Carzino  Luca Ceseracciu  Athanassia Athanassiou  Despina Fragouli 《洁净——土壤、空气、水》2023,51(1):2200284

Conversion of waste biomass into valuable functional materials accomplishes the concept of circular economy in the development of sustainable waste management, and also recovery of such resources possibly reduces the requirement of feedstocks. In this scenario, the development of methodologies toward the direct conversion of the raw biomass into solid adsorbent materials without the use of any templates is highly desirable, but exceptionally challenging due to the complexity of the process. Here the direct synthesis of 3D porous carbon traps by a simple, cost-effective, and template-free process starting from a kitchen-based recipe and fermented food waste is described. Precisely, a robust carbon trap is formed with a spongy structure and highly interconnected hierarchical pores after the pyrolysis of a rice-based foam in the air. The developed materials float on water and interact efficiently with cationic dyes at static conditions. Importantly, such performance of the 3D carbon traps is not affected in the presence of anionic dyes, indicating the excellent selectivity towards the adsorption of cationic dyes. The adsorbent can be easily recovered and reused for up to 3 cycles without releasing any byproducts, thus, without causing hazardous risk of any secondary pollution to the environment.  相似文献   

Micro-seismic monitoring after the shipwreck of the Costa Concordia at Giglio Island (Italy)     

Andrea Fiaschi  Luca Matassoni  Alessia Lotti  Gilberto Saccorotti 《Acta Geophysica》2017,65(5):1019-1027

A micro-seismic network was used for monitoring the wreck of the Costa Concordia cruise ship, wrecked and run agrounded along the Giglio Island coasts during the night of 13 January 2012, until its removal. The seismic traces were processed by means of real-time and “a posteriori” procedures to detect transients that could be ascribed to wreck movements on the sea bed to integrate this information in an early warning system for assessing the wreck stability. After a first discrimination of the transients using amplitude criteria we proceeded to the localization of the detected signals to focus the attention only on the transients originated in the shipwreck resting area. The results showed that most of the events localized on the wreck were likely related to human work activities or sudden internal brittle failure but not to displacements on the seafloor. Instead, the displacements are associated to the impact on the vessel of great sea storms which approach were well correlated with the increasing seismic noise at low frequency. The carried out procedures based on this unique dataset represent an opportunity to test seismic monitoring techniques also in not usual engineering context to support emergency management activities.  相似文献   

Near-bankfull floods in an Alpine stream: Effects on the sediment mobility and bedload magnitude   总被引：1，自引：0，他引：1  

Riccardo Rainato  Luca Mao  Lorenzo Picco 《国际泥沙研究》2018,33(1):27-34

In a mountain environment, the transport of coarse material is a key factor for many fields such as geomorphology, ecology, hazard assessment, and reservoir management. Despite this, there have been only a few field investigations of bedload, in particular using multiple monitoring methods. In this sense, attention has frequently focused on the effects of “high magnitude/low frequency floods” rather than on “ordinary events”. This study aims to analyze the sediment dynamics triggered by three high-frequency floods (recurrence interval “RI” between 1.1 and 1.7 yr) that occurred in the Rio Cordon basin during 2014. The flood events were investigated in terms of both sediment mobility and bedload magnitude. The Rio Cordon is an Alpine basin located in northeastern Italy. The catchment has a surface area of 5 km², ranging between 1763 and 2763 m above sea level. The Rio Cordon flows on an armored streambed layer, with a stable step-pool configuration and large boulders. Since 1986, the basin has been equipped with a permanent station to continuously monitor water discharge and sediment flux. To investigate sediment mobility, 250 PIT-tags were installed in the streambed in 2012. The 2014 floods showed a clear difference in terms of tracer displacement. The near-bankfull events showed equal mobility conditions, with mean travel distance one order of magnitude higher than the below-bankfull event. Furthermore, only the near-bankfull events transported coarse material to the monitoring station. Both events had a peak discharge up to 2.06 m³ s^-1, but the bedload transport rates differed by more than one order of magnitude, proving that under the current supply-limited condition, the bedload appears more related to the sediment supply than to the magnitude of the hydrological features. In this sense, the results demonstrated that near-bankfull events can mobilize large amounts of material for long distances, and that floods of apparently similar magnitude may lead to different sediment dynamics, depending on the type and amount of sediment supply.  相似文献   

Seismic design of floor–wall joints of multi-storey CLT buildings to comply with regularity in elevation     

Davide Trutalli  Luca Pozza 《Bulletin of Earthquake Engineering》2018,16(1):183-201

The effects of irregularity in elevation of cross-laminated timber buildings have not been fully analysed in literature to provide useful information for the design. In this work, a number of building configurations, regular or irregular in elevation, characterized by a different arrangement per storey of the floor–wall joints have been analysed by means of non-linear dynamic analyses. Comparative results in terms of ratio between the behaviour q-factor of the investigated irregular configurations and that of reference regular ones, show that less dissipative capacity can be expected if the building is irregular due to a disequilibrium among storeys between the actual and the required strength provided by the floor–wall joints. A correlation method to estimate the behaviour q-factor for perfectly regular cross-laminated timber buildings is here presented and extended to in-elevation irregular ones. A new empirical formulation to assess the reliable corrective factor accounting for the irregularity in elevation of cross-laminated timber buildings, according to Eurocode 8 provisions, is also proposed. A final discussion about the implications of in-elevation irregularity on the building design is reported.  相似文献   

Deep tunnel fronts in cohesive soils under undrained conditions: a displacement-based approach for the design of fibreglass reinforcements     

di Prisco  Claudio  Flessati  Luca  Porta  Davide 《Acta Geotechnica》2020,15(4):1013-1030

The fronts of tunnels excavated under particularly difficult ground conditions by employing conventional tunnelling methods are commonly supported: the stabilization is usually achieved either by improving the mechanical properties of the soil (injections, jet grouting, soil freezing, etc.) or by introducing linear inclusions. This last technique, consisting in the introduction of pipes (usually made of fibreglass reinforced polymers) in the front, is particularly popular since it is very simple to adapt the reinforcement geometry, length and number to the different conditions encountered during the excavation. The design of this reinforcement technique is nowadays based on very simplified approaches: on either empirical formula or the limit equilibrium method. In a previous paper, the authors numerically studied the mechanical response of unreinforced fronts in cohesive soils and defined a non-dimensional front characteristic curve. In this paper, the authors intend to take into consideration the role of reinforcements by following the same approach. A procedure allowing the definition of the reinforced non-dimensional front characteristic curve, once the reinforcement pattern is assigned, is introduced. The practical use of this curve is described.

  相似文献   

Evidence of hydrothermal fluid flow in a hyperextended rifted margin: the case study of the Err nappe (SE Switzerland)     

Nicolò Incerpi  Luca Martire  Gianreto Manatschal  Stefano M. Bernasconi 《Swiss Journal of Geoscience》2017,110(2):439-456

This paper investigates hydrothermal fluid circulation in pre- and syn-tectonic sediments associated with detachments faults. The study area, located in the Err Nappe (SE-Switzerland), preserves a portion of the Adriatic distal margin. Two sites were studied in combining fieldwork, petrography, geochemistry and fluid inclusion analysis: the Piz Val Lunga and Fuorcla Cotschna areas. Both preserve relationships between a spectacularly exposed rift-related extensional detachment fault and its footwall and hangingwall that consist of extensional allochthons and syn- to post-tectonic sediments. These areas register a complex fluid flow history characterized by dolomitization, de-dolomitization, calcite cementation, dolomite and quartz veining and diffuse silicification. Meso- and micro-scale observations allow defining two steps in fluid evolution, which are related to Jurassic rift activity. A first carbonate-rich event occurred before the exhumation of the granitic basement, and this was followed by a second event marked by a change in the fluid towards a silica-dominated chemistry. Homogenization temperatures of fluid inclusions (average T_h = 120?130 °C), negative δ¹⁸O values and a radiogenic ⁸⁷Sr/⁸⁶Sr signatures of carbonate minerals support the hypothesis that both the pre-tectonic rocks constituting the allochthons and the syn-tectonic sediments overlying the detachment fault were crossed by a flux of over-pressured hydrothermal fluids originating from seawater that penetrated into the basement through fault and fracture systems. Field relationships show that this fluid circulation started latest in middle Early Jurassic time, when fault activity migrated from the proximal to the future distal margin. We propose that it evolved chemically as a result of the involvement of the granitic basement forming the footwall of the extensional detachment system. Hydrothermal activity continued until the Middle/Late Jurassic, when tectonic activity shifted outwards leading to the exhumation of mantle rocks. This paper provides an original contribution to better understand the complex evolution of hyperextended continental rift domains and to constrain their thermal regimes.  相似文献   

Earthquake Hazard and the Environmental Seismic Intensity (ESI) Scale     

Leonello Serva  Eutizio Vittori  Valerio Comerci  Eliana Esposito  Luca Guerrieri  Alessandro Maria Michetti  Bagher Mohammadioun  Georgianna C. Mohammadioun  Sabina Porfido  Ruben E. Tatevossian 《Pure and Applied Geophysics》2016,173(5):1479-1515

  相似文献   

Vegetation turnover in a braided river: frequency and effectiveness of floods of different magnitude          下载免费PDF全文

Nicola Surian  Matteo Barban  Luca Ziliani  Giovanni Monegato  Walter Bertoldi  Francesco Comiti 《地球表面变化过程与地形》2015,40(4):542-558

This work addresses the temporal dynamics of riparian vegetation in large braided rivers, exploring the relationship between vegetation erosion and flood magnitude. In particular, it investigates the existence of a threshold discharge, or a range of discharges, above which erosion of vegetated patches within the channel occurs. The research was conducted on a 14 km long reach of the Tagliamento River, a braided river in north‐eastern Italy. Ten sets of aerial photographs were used to investigate vegetation dynamics in the period 1954–2011. By using different geographic information system (GIS) procedures, three aspects of geomorphic‐vegetation dynamics and interactions were addressed: (i) long‐term (1954–2011) channel evolution and vegetation dynamics; (ii) the relationship between vegetation erosion/establishment and flow regime; (iii) vegetation turnover, in the period 1986–2011. Results show that vegetation turnover is remarkably rapid in the study reach with 50% of in‐channel vegetation persisting for less than 5–6 years and only 10% of vegetation persisting for more than 18–19 years. The analysis shows that significant vegetation erosion is determined by relatively frequent floods, i.e. floods with a recurrence interval of c. 1–2.5 years, although some differences exist between sub‐reaches with different densities of vegetation cover. These findings suggest that the erosion of riparian vegetation in braided rivers may not be controlled solely by very large floods, as is the case for lower energy gravel‐bed rivers. Besides flow regime, other factors seem to play a significant role for in‐channel vegetation cover over long time spans. In particular, erosion of marginal vegetation, which supplies large wood elements to the channel, increased notably over the study period and was an important factor for in‐channel vegetation trends. Copyright © 2014 John Wiley & Sons, Ltd.  相似文献   

Reconstruction of a destructive debris‐flow event via numerical modeling: the role of valley geometry on flow dynamics          下载免费PDF全文

Luca Schilirò  Fabio V. De Blasio  Carlo Esposito  Gabriele Scarascia Mugnozza 《地球表面变化过程与地形》2015,40(14):1847-1861

  相似文献