Electrical analogy for modelling thermal regime and moisture distribution in sandy soils     

Somenath Mondal  Vikas Sharma  P. Apte 《Geomechanics and Geoengineering》2018,13(1):22-32

The soil mass is subjected to temperature variation due to several human activities (viz. tanks storing heated fluids, buried cables and pipelines, air-conditioning ducts, disposal of nuclear and thermal power plant wastes etc.), which result in heat-induced migration of the moisture in it. Though several studies have been conducted in the past to investigate the mechanism of heat migration through the soil mass, a methodology for ‘real-time measurement of the variations in temperature, flux and moving moisture front, in tandem, with respect to space' has rarely been attempted. In this context, extensive laboratory investigations were conducted to measure real-time flux and temperature variations in the sandy soils, and the validation of results has been done by employing an equivalent electrical circuit programme, LTspice. Subsequently, a mathematical model PHITMDS (i.e. Prediction of Heat-Induced Temperature and Moisture Distribution in Soil) has been developed and its utility and efficacy, for predicting the depth-wise temperature and heat-induced moisture migration, due to evaporation, in terms of position of moving moisture front in the sandy soil has been critically discussed and demonstrated.  相似文献   

Rainfall flood hazard at nuclear power plants in India     

Pramod Kumar Sharma 《Georisk: Assessment and Management of Risk for Engineered Systems and Geohazards》2018,12(3):218-233

Flood hazard evaluation is an important input for Nuclear Power Plants external events safety studies. In the present study, flood hazard at various nuclear sites in India due to rainfall has been evaluated. Hazard estimation is a statistical procedure by which rainfall intensity versus occurrence frequency is estimated from historical records of rainfall data and extrapolated with asymptotic extreme value distribution. Rainfall data needed for flood hazard assessment are daily annual maximum rainfall (24?h data). The observed data points have been fitted using Gumbel, power law and exponential distribution, and return period has been estimated. To study the stationarity of rainfall data, a moving window estimate of the parameters has been performed. The rainfall pattern is stationary in both coastal and inland regions over the period of observation. The coastal regions show intense rainfall and higher variability than inland regions. Based on the plant layout, catchment area and drainage capacity, the prototype fast breeder reactor (PFBR) site is unlikely to be flooded.  相似文献   

Mapping lithological variations in a river basin of West Bengal,India using electrical resistivity survey: implications for artificial recharge     

K. Pratima Panda  S. P. Sharma  Madan K. Jha 《Environmental Earth Sciences》2018,77(17):626

Groundwater is a treasured earth’s resource and plays an important role in addressing water and environmental sustainability. However, its overexploitation and wide spatial variability within a basin and/or across regions are posing a serious challenge for groundwater sustainability. Some parts of southern West Bengal of India are problematic for groundwater occurrence despite of high rainfall in this region. Characterization of an aquifer in this area is very important for sustainable development of water supply and artificial recharge. Electrical resistivity surveys using 1-D and 2-D arrays were performed at a regular interval from Subarnarekha River at Bhasraghat (south) to Kharagpur (north) to map the lithological variations in this area. Resistivity sounding surveys were carried out at an interval of 2–3 km. Subsurface resistivity variation has been interpreted using very fast simulated annealing (VFSA) global optimization technique. The analysis of the field data indicated that the resistivity variation with depth is suitable in the southern part of the area and corresponds to clayey sand. Interpreted resistivity in the northern part of the area is relatively high and reveals impervious laterite layer. In the southern part of the area resistivity varies between 15 and 40 Ωm at a depth below 30 m. A 2-D resistivity imaging conducted at the most important location in the area is correlated well with the 1-D results. Based on the interpreted resistivity variation with depth at different locations different types of geologic units (laterite, clay, sand, etc.) are classified, and the zone of interests for aquifer has been demarcated. Study reveals that southern part of the area is better for artificial recharge than the northern part. The presence of laterite cover in the northern part of the area restricts the percolation of rainwater to recharge the aquifer at depth. To recharge the aquifer at depth in the northern part of the area, rainwater must be sent artificially at depth by puncturing laterite layers on the top. Such studies in challenging areas will help in understanding the problems and finding its solution.  相似文献   

Aerosol-trace gases interactions and their role in air quality control of Delhi city (India)     

Anshu Sharma  Saumya Singh  Umesh C. Kulshrestha 《Arabian Journal of Geosciences》2018,11(13):358

Atmospheric dust is considered to be the major cause of poor air quality due to its contribution to high particulate levels, but their interaction with the acidic gases helps in controlling the level of SO₂ and NO₂ through ambient neutralization reactions. In the present study, the interaction of acidic gases such as SO₂ and NO₂ with alkaline dust was investigated during October, 2013–July, 2014 at a site named as Babarpur located at the Trans-Yamuna region of Delhi. The concentration of SO₂ ranged from 10 to 170 μg/m³ with an average of 36 μg/m³ while that of NO₂ ranged from 15 to 54 μg/m³ with an average of 26?±?8 μg/m³. The results were observed to be well within the National Ambient Air Quality Standard (NAAQS) limits prescribed by the Central Pollution Control Board (CPCB). The average concentrations of SO₂ during day and night time were recorded as 31?±?18 and 43?±?53 μg/m³ respectively while the mean concentrations of NO₂ during day and night time were recorded as 26?±?7 and 27?±?12 μg/m³ respectively. A positive correlation between SO₄^2? and NO₃^? was also observed indicating their secondary aerosol formation. In aerosol phase, average concentrations of SO₄^2? during day and night time were 3.9?±?0.3 and 6.5?±?2.3 μg/m³ respectively while that of NO₃^? were 9.5?±?1.5 and 7.3?±?0.5 μg/m³ respectively. Molar ratios of Ca²⁺/SO₄^2?, NH₄⁺/SO₄^2?, and NH₄⁺/NO₃^? were observed as 8, 5, and 1.7 during daytime and 1.5, 0.4, and 0.8 during nighttime respectively. Such molar ratios confirmed high concentrations of sulphate (SO₄)^2? and low concentrations of nitrate (NO₃^?) during night time, thereby indicating different pathway of aerosol formation during day and night time. Surface morphology and elemental composition of aerosol samples showed various oval, globular, and platy shapes where the diameter varied from few nm to ~5 μm depending on their precursors. There were certain shapes like grossularite, irregular aggregate, grape-like, triangular, and flattened which indicate the crustal origin of aerosols and their possible role in SO₂ and NO₂ adsorption.  相似文献   

Holocene tectono-geomorphic evolution of Haryana plains,Western Ganga plain,India     

Pitambar Pati  Vivekanand Acharya  Aditya Kumar Verma  Narendra Kumar Patel  Rajendra Prasad Jakhmola  Chinmay Dash  Vijay Sharma  Ankit Gupta  Brahm Parkash  Arun Kumar Awasthi 《Arabian Journal of Geosciences》2018,11(13):361

Haryana plain is the drainage divide between the Ganga plain in the east and the Indus plain in the west. Being a part of the Himalayan foreland, its geomorphology, sedimentation processes, and tectonism are broadly controlled by the Himalayan tectonics. Soil and geomorphological mapping in Haryana plain bring out geomorphic features such as paleochannels, various active drainage patterns, and landforms such as old fluvial plains, floodplains, piedmonts, pediments, terminal fans, and eolian plains. Based on the degree of soil development, and Optical stimulated luminescence (OSL) ages, the soil-geomorphic units were grouped into six members (QIMS-I to VI) (Quaternary Indus Morphostratigraphic Sequence) of a morphostratigraphic sequence: QIMS-VI 9.86–5.38 Ka, QIMS-V 5.38–4.45 Ka, QIMS-IV 4.45–3.60 Ka, QIMS-III 3.60–2.91 Ka, QIMS-II <?2.91–1.52 Ka, and QIMS-I <?1.52 Ka. OSL chronology of different geomorphic features suggests six episodes of tectono-geomorphic evolution in the region since 10 Ka. Neotectonic features such as nine faults, two lineaments, and five fault-bounded tectonic blocks have been identified. Independent tilting and sagging of the blocks in response to neotectonics have resulted in modification of landforms, depositional processes, and hydro-geomorphology of the region. Major rivers like the Yamuna, the Ghaggar, and the Sutlej show different episodes of shifting of their courses. Lineament controlled few extinct channels have been recorded between 20 and 25 m depth below the surface in the ground-penetrating radar (GPR) profiles. These buried channels are aligned along the paleo-course of the Lost Saraswati River interpreted from the existing literature and hence are considered as the course of the lost river. Seven terminal fans have been formed on the downthrown blocks of the associated faults. The Markanda Terminal Fan, the first of such features described, is indeed a splay terminal fan and was formed by a splay distributary system of the Markanda River. Association of three terminal fans of different ages with the Karnal fault indicates the segment-wise development of the fault from west to east. Also, comparison with other such studies in the Ganga plain to further east suggests that the terminal fans formed by streams with distributary drainage pattern occur only in semiarid regions as in the present area and thus are indicators of semiarid climate/paleoclimate. Though the whole region is tectonically active, the region between the Rohtak fault and Hisar fault is most active at present signified by the concentration of earthquake epicenters.  相似文献   

Construction and Characterization of Transportable Calibration Pads for Calibration of Portable and Airborne Gamma Ray Spectrometers in India     

Pravin Kumar Sharma  Nalin Kumar Johri  Gagan Behari Raut  G. Rangaswamy  Brahma Kishore Pandey  Anand Kumar Chaturvedi 《Journal of the Geological Society of India》2018,91(3):281-289

Characterization of the Panandhro lignite deposits from western Indian state of Gujarat, based on the geochemical and palynological evidences, has been performed to assess the floral composition, maturity and hydrocarbon potential of the sequence. Elementally, the lignites consist of moderate carbon, low hydrogen and moderate sulfur contents. The samples are characterized by high TOC contents (lignite: av. 46.43 wt.%, resin: 62.47 wt.%). The average HI values for the lignite is 136 mg HC/g TOC, and that of the associated resin is 671 mg HC/g TOC. The highest T_max is recoded in lignite (422°C) and lowest in the resin (39°C) samples. The FTIR spectrum of lignite is characterized by highly intense OH stretching peak ~3350 cm^-1, aliphatic CH_x stretching peaks between 3000-2800 cm^-1, aromatic C=O stretching and an aromatic C=C stretching. The spectrum of resin shows strongest absorption due to aliphatic CHx stretching between 2940-2915 cm^-1 and 2870-2850 cm^-1, and deformation by the medium peak between 1450 and 1650 cm^-1. The recovered palynofloral assemblage indicates the dominance of angiosperm pollen grains with maximum abundance of Arecaceae family, and subdominant pteridophytic spores. Marine influence is indicated by the presence of abundant dinoflagellate cysts. The occurrence of flora from a variety of ecological niches suggests a luxuriant diverse vegetation pattern existed in the vicinity of depositional site under humid tropical conditions. The overall characteristics of the lignite deposits point towards their ability to generate (upon maturation) hydrocarbons as they have types III–II admixed kerogen (organic matters).  相似文献   

Calibration of AGRS System Using Transportable Pads in India: An Application to AGRS Data of Aravalli Basin,Banswada Block,South Rajasthan     

M. S. Ramayya  A. K. Chaturvedi  P. S. Parihar  P. K. Sharma  D. U. Jiwane  P. K. Srivastava  T. C. Sunil 《Journal of the Geological Society of India》2018,91(5):535-540

Calibration of airborne gamma ray spectrometric system (AGRS) over standard radioactive sources of known elemental abundances is essential before carrying out airborne surveys. In India, fixed calibration pads were constructed in 1985. Since then calibration of AGRS system was carried out over the fixed pads. However the fixed pads are expensive to build and maintain. Also the large pads are subject to variations in radiation output due to variable moisture content and radon loss. Alternate approach is to construct transportable calibration pads which are discussed in this paper.Atomic Minerals Directorate for Exploration & Research (AMD) under Department of Atomic Energy has recently constructed five transportable calibration pads. Three pads i.e. K, U and Th have been spiked with the respective radioelements while keeping the minor radioelements to the least in order to obtain pure spectra. A composite pad has been constructed which contains all the three radioelements. This helps in cross verifying the obtained calibration results. A background pad has also been constructed which is helpful to obtain the background values during calibration.Analysis of the data acquired over the transportable pads with airborne gamma ray spectrometer (16.8 ltr) has been carried out and presented in this paper. A comparison with the data acquired over the fixed calibration pads is also included. There is a good agreement of results which suggests the use of transportable pads in future.  相似文献   

Design principles for origin-destination flow maps     

Bernhard Jenny  Daniel M. Stephen  Ian Muehlenhaus  Brooke E. Marston  Ritesh Sharma  Eugene Zhang 《制图学和地理信息科学》2018,45(1):62-75

Origin-destination flow maps are often difficult to read due to overlapping flows. Cartographers have developed design principles in manual cartography for origin-destination flow maps to reduce overlaps and increase readability. These design principles are identified and documented using a quantitative content analysis of 97 geographic origin-destination flow maps without branching or merging flows. The effectiveness of selected design principles is verified in a user study with 215 participants. Findings show that (a) curved flows are more effective than straight flows, (b) arrows indicate direction more effectively than tapered line widths, and (c) flows between nodes are more effective than flows between areas. These findings, combined with results from user studies in graph drawing, conclude that effective and efficient origin-destination flow maps should be designed according to the following design principles: overlaps between flows are minimized; symmetric flows are preferred to asymmetric flows; longer flows are curved more than shorter or peripheral flows; acute angles between crossing flows are avoided; sharp bends in flow lines are avoided; flows do not pass under unconnected nodes; flows are radially distributed around nodes; flow direction is indicated with arrowheads; and flow width is scaled with represented quantity.  相似文献   

Transforming local natural resource conflicts to cooperation in a changing climate: Bangladesh and Nepal lessons     

Parvin Sultana  Paul Michael Thompson  Naya Sharma Paudel  Madan Pariyar  Mujibur Rahman 《Climate Policy》2019,19(6):S94-S106

ABSTRACT

Since the 1990s, climate change impact discourse has highlighted potential for large scale violent conflicts. However, the role of climate stresses on local conflicts over natural resources, the role of policies and adaptation in these conflicts, and opportunities to enhance cooperation have been neglected. These gaps are addressed in this paper using evidence from participatory action research on 79 cases of local collective action over natural resources that experience conflicts in Bangladesh and Nepal. Climate trends and stresses contributed to just under half of these conflict cases. Nine factors that enable greater cooperation and transformation of conflict are identified. Participatory dialogue and negotiation processes, while not sufficient, changed understanding, attitudes and positions of actors. Many of the communities innovated physical measures to overcome natural resource constraints, underlying conflict, and/or institutional reforms. These changes were informed by improving understanding of resource limitations and indigenous knowledge. Learning networks among community organizations encouraged collective action by sharing successes and creating peer pressure. Incentives for cooperation were important. For example, when community organizations formally permitted excluded traditional resource users to access resources, those actors complied with rules and paid towards management costs. However, elites were able to use policy gaps to capture resources with changed characteristics due to climate change. In most of the cases where conflict persisted, power, policy and institutional barriers prevented community-based organizations from taking up potential adaptations and innovations. Policy frameworks recognizing collective action and supporting flexible innovation in governance and adaptation would enable wider transformation of natural resource conflicts into cooperation.

Key policy insights

• Climate stresses, policy gaps and interventions can all worsen local natural resource conflicts.

• Sectoral knowledge and technical approaches to adaptation are open to elite capture and can foster conflicts.

• Many local natural resource conflicts can be resolved but this requires an enabling environment for participatory dialogue, external facilitation, flexible responses to context, and recognition of disadvantaged stakeholder interests.

• Transforming conflict to greater cooperation mostly involves social and institutional changes, so adaptation policies should focus less on physical works and more on enabling factors such as negotiation, local institutions, knowledge, and incentives.

  相似文献   

Image analysis of seafloor photographs for estimation of deep-sea minerals     

Rahul Sharma  S. Jai Sankar  Sudeshna Samanta  A. A. Sardar  D. Gracious 《Geo-Marine Letters》2010,30(6):617-626

Factors such as non-uniform illumination of seafloor photographs and partial burial of polymetallic nodules and crusts under sediments have prevented the development of a fully automatic system for evaluating the distribution characteristics of these minerals, necessitating the involvement of a user input. A method has been developed whereby spectral signatures of different features are identified using a software ‘trained’ by a user, and the images are digitized for coverage estimation of nodules and crusts. Analysis of >20,000 seafloor photographs was carried out along five camera transects covering a total distance of 450 km at 5,100–5,300 m water depth in the Central Indian Ocean. The good positive correlation (R² > 0.98) recorded between visual and computed estimates shows that both methods of estimation are highly reliable. The digitally computed estimates were ∼10% higher than the visual estimates of the same photographs; the latter have a conservative operator error, implying that computed estimates would more accurately predict a relatively high resource potential. The fact that nodules were present in grab samples from some locations where photographs had nil nodule coverage emphasises that nodules may not always be exposed on the seafloor and that buried nodules will also have to be accounted for during resource evaluation. When coupled with accurate positioning/depth data and grab sampling, photographic estimates can provide detailed information on the spatial distribution of mineral deposits, the associated substrates, and the topographic features that control their occurrences. Such information is critical for resource modelling, the selection of mine sites, the designing of mining systems and the planning of mining operations.  相似文献