Late Oligocene–Early Miocene palaeoecology based on pollen data from the Kalkım-Gönen Basin (Northwest Turkey)     

Sariye Duygu Üçbaş Durak  Mehmet Serkan Akkiraz 《Geodinamica Acta》2016,28(4):295-310

Radiometric and palynological data of the Upper Oligocene–Lower Miocene Soma Formation from the Kalk?m-Gönen Basin yield new results related to age and palynological contents. In this study, Upper Oligocene strata from the Dani?ment and Linfa areas and Lower Miocene strata from the Bengiler area were sampled palynologically and for radiometric dating. The Dani?ment assemblage, which is older than the Linfa assemblages, mainly contains coniferous and evergreen to deciduous mixed mesophytic forest elements. Relatively high quantities of the altitudinal plants Picea and Abies, indicate a cooler palaeoclimate. The Linfa associations mainly include coniferous and riparian elements. Pollen of the riparian plant Alnus and Taxodiaceae indicative for the swamp forest community was predominant, probably as a result of a high lake level. There is a hiatus during the Oligocene–Miocene transition, probably showing a non-depositional phase and sea-level fall indicating the Mi-1 glaciation event. Higher in the sequence, the Aquitanian Bengiler sediments include high amounts of coniferous forest elements as well as components indicative for the evergreen and deciduous mesophytic forest and also riparian forest and swamp forest. Due to presence of thermophilous taxa Reveesia, Mastixiaceae and Arecaceae, a warm and humid palaeoclimate is inferred according to quantitative analyses using the Coexistence Approach.  相似文献   

Permo-Carboniferous granitoids with Jurassic high temperature metamorphism in Central Pontides,Northern Turkey     

Mehmet Ali Gücer  Mehmet Arslan  Sarah Sherlock  Larry M. Heaman 《Mineralogy and Petrology》2016,110(6):943-964

  相似文献   

An evaluation of the relationship between physical/mechanical properties and mineralogy of landscape rocks as determined by hyperspectral reflectance     

Erdem Emin Maras  Mustafa Caniberk  Mehmet Serhat Odabas  Burcu Degerli  Süleyman Sirri Maras  Hadi Hakan Maras 《Arabian Journal of Geosciences》2016,9(2):164

We investigated the relationships between mineral content and the physical and mechanical properties of landscape rock using a non-destructive remote sensing method applied in the laboratory. Using this technique, the spectral properties of the landscape rock could be collected at different wavelengths without harming the samples. Differences in spectral reflectance were compared with the physical and mechanical properties of the stone. Significant correlations were observed between reflectance values and the rocks’ mechanical and physical properties, with correlation coefficients of 95 to 99 %. However, establishing a correlation between two variables is not a sufficient condition to establish a causal relationship. Mineral densities and mineral content are characteristics used for the classification of landscape rock. We have concluded that although spectral signatures from landscape rock can be used for predicting which stones might have similar features when comparing two batches of stone, the high correlations we discovered cannot confirm a cause and effect relationship that would allow for the prediction of a rock’s physical and mechanical properties. Although this conclusion is disappointing, the mineral content and the significant correlations discovered by hyperspectral reflectance scanning can be used as supplementary information when comparing two samples of landscape rock.  相似文献   

Structural properties of Urfa stone doped with erbium oxide     

Bulent Aktas  Serife Yalcin  Mehmet Albaskara  Ali Arslan  Gokhan Ceyhan 《Arabian Journal of Geosciences》2018,11(23):757

In this study, we investigated the structural properties of Urfa stone (US) doped with erbium oxide (Er₂O₃). Solid US was powdered by using an agate mortar, and its elemental composition was determined using inductive coupling plasma (ICP) methods. Varying amounts of Er₂O₃ (5, 10, 20, 30, and 40%) were added as a dopant to the US powder using mechanical alloying methods. The resultant samples were sintered at 1000 °C for 1 h. The structural properties of the Er₂O₃-doped US samples were subsequently investigated using X-ray diffraction (XRD), Fourier-transform infrared spectrometry (FTIR), and photoluminescence methods. Results from the XRD analysis of the Er₂O₃-doped US powder indicated two crystalline phases: (1) calcium oxide (CaO) or lime and (2) Er₂O₃. After the samples were sintered at 1000 °C, CaO, Er₂O₃, calcium carbonate (CaCO₃), and mixed crystalline phases were observed. Results from the FTIR analysis of the Er₂O₃-doped US samples indicated absorption bands at 711.91, 872.08, and 1396.87 cm^?1 in the spectra. Finally, photoluminescence analysis results indicated a shift in the emission and excitation bands to longer and shorter wavelengths, respectively, in the solid state (non-aqueous media) US-Er complex.  相似文献   

Integration of GIS,AHP and TOPSIS for earthquake hazard analysis     

Penjani Hopkins Nyimbili  Turan Erden  Himmet Karaman 《Natural Hazards》2018,92(3):1523-1546

Worldwide, earthquakes and related disasters have persistently had severe negative impacts on human livelihoods and have caused widespread socioeconomic and environmental damage. The severity of these disasters has prompted recognition of the need for comprehensive and effective disaster and emergency management (DEM) efforts, which are required to plan, respond to and develop risk mitigation strategies. In this regard, recently developed methods, known as multi-criteria decision analysis (MCDA), have been widely used in DEM domains by emergency managers to greatly improve the quality of the decision-making process, making it more participatory, explicit, rational and efficient. In this study, MCDA techniques of the Analytical Hierarchical Process (AHP) and the Technique for Order Preference by Similarity to Ideal Solution (TOPSIS), integrated with GIS, were used to produce earthquake hazard and risk maps for earthquake disaster monitoring and analysis for a case study region of Küçükçekmece in Istanbul, Turkey. The five main criteria that have the strongest influence on the impact of earthquakes on the study region were determined: topography, distance to epicentre, soil classification, liquefaction and fault/focal mechanism. AHP was used to determine the weights of these parameters, which were also used as input into the TOPSIS method and GIS (ESRI ArcGIS) for simulating these outputs to produce earthquake hazard maps. The resulting earthquake hazard maps created by both the AHP and TOPSIS models were compared, showing high correlation and compatibility. To estimate the elements at risk, population and building data were used with the AHP and TOPSIS hazard maps for potential loss assessment; thus, we demonstrated the potential of integrating GIS with AHP and TOPSIS in generating hazard maps for effective earthquake disaster and risk management.  相似文献   

Compressional behavior of clayey sand and transition fines content     

Mehmet Murat Monkul  Gurkan Ozden   《Engineering Geology》2007,89(3-4):195-205

Clayey sand can be considered as a composite matrix of coarse and fine grains. The interaction between coarser and finer grain matrices affects the overall stress–strain behavior of these soils. Intergranular void ratio, e_s (which is the void ratio of the coarser grain matrix) can be utilized as an alternative parameter to express the compressive response of such soils. Oedometer tests conducted on reconstituted kaolinite–sand mixtures indicate that initial conditions, percentage of fines, and stress conditions influence the compression characteristics evidently. Tests showed that, up to a fraction of fines, which is named as transition fines content (FC_t), compression behavior of the mixtures is mainly controlled by the sand grains. When concentration of fines exceeds FC_t, kaolinite controls the compression. It was found that FC_t varies between 19% and 34% depending on the above mentioned factors. This range of fines content is also consistent with various values reported in literature regarding the strength alteration. Performed direct shear tests revealed that there is also a close relationship between transition fines content and shear strength, which is harmonic with the oedometer test results.  相似文献   

Eocene tonalite–granodiorite from the Havza (Samsun) area,northern Turkey: adakite-like melts of lithospheric mantle and crust generated in a post-collisional setting     

Irfan Temizel  Mehmet Arslan  Cem Yücel  Emel Abdioğlu Yazar  Abdullah Kaygusuz  Zafer Aslan 《International Geology Review》2020,62(9):1131-1158

ABSTRACT

Eocene intermediate to felsic plutons of different sizes and compositions are widespread in the Eastern Pontides Orogenic Belt in northern Turkey. Of these, the Ta?l?k Tepe pluton in the Havza (Samsun) area is fine-to-medium-grained, with granular, porphyritic, and micrographic textures, and include mafic microgranular enclaves (MMEs). LA-ICP-MS U-Pb zircon dating yielded emplacement ages of 42.9 (± 1.4) and 40.5 (± 1.3) Ma for the host granodioritic pluton and the dioritic MMEs, respectively. Petrochemically, the host pluton has I-type, high-K calc-alkaline, and metaluminous-to-slightly peraluminous features (A/CNK = 0.95–1.06). The host pluton also shows geochemical features of adakite-like rocks with high SiO₂ (67–68 wt%) and Al₂O₃ (15.5–16.0 wt%) content and Ba/La (17–23), Sr/Y (40.7–61.6), and La_N/Yb_N (14.4–23.7) ratios and low Y (8.2–9.9 ppm) and Yb_N (3.1–4.4) contents. Whole-rock major and trace element variations suggest that fractional crystallisation played a significant role in the pluton evolution. The N-MORB normalised trace element patterns of the pluton are similar to those of MMEs with enrichment in large-ion lithophile elements, Th and Ce, and negative Nb and Ti anomalies. Chondrite-normalised rare earth element plots show moderate-to-highly enriched concave patterns (La_N/Lu_N = 14.2–21.6) with insignificant negative Eu anomalies (Eu_N/Eu* = 0.86–1.14), all of which imply hornblende fractionation during magmatic evolution. The pluton samples have ⁸⁷Sr/⁸⁶Sr ratios of 0.704767 to 0.704927, ¹⁴³Nd/¹⁴⁴Nd ratios of 0.512767–0.512774, εNd values of (+2.52) – (+2.65), and δ¹⁸O values of 7.9–9.7‰. The isotopic compositions of the host pluton and MMEs are similar to I-type granitoids derived from mantle sources. The MMEs show incomplete magma mixing/mingling, representing small bodies of mafic parental magma. Combined with regional studies, these new data suggest that the parental magma of the studied adakite-like pluton was generated from the lithospheric mantle and then modified by fractional crystallisation and assimilation in a post-collisional setting.  相似文献   

A reconnaissance report for the Romanian earthquake of 4 March 1977     

Semih S. Tezcan  Vedat Yerlici  H. Turan Durguno 《地震工程与结构动力学》1978,6(4):397-421

The engineering aspects of the 4 March 1977 Romanian earthquake are presented. They are based upon a field investigation conducted by the writers in Bucharest and in southern Romania in collaboration with members of the Building Research Institute of Romania, during the period 25–31 March 1977. This report covers general observations, data and evaluation on the character of the earthquake, structural damage inflicted by it, performance of different types of buildings during the earthquake and relief operations.  相似文献   

Quality control and homogeneity of Turkish precipitation data     

Ozan Mert Göktürk  Deniz Bozkurt  Ömer Lütfi Şen  Mehmet Karaca 《水文研究》2008,22(16):3210-3218

Outlier trimming and homogeneity checking/correction were performed on the monthly precipitation time series of various lengths from 267 stations in Turkey. Outlier values are usually found during dry summer months, and are concentrated mostly over the southern parts of the country, where the dry period is most pronounced, implying natural extremes rather than wrong measurements. Homogeneity analysis was done using the Standard Normal Homogeneity Test, on an individual monthly basis, which led to many non‐testable series due to lack of reference stations, especially during summer months. Yet, remaining testable months were usually helpful for the assessment of homogenity, revealing a well distributed set of stations that proved to be homogeneous. There were still a number of stations which either could not be tested efficiently, or were classified as inhomogeneous. Lack of metadata is argued to be largely responsible for inefficient homogeneity testing. Copyright © 2008 John Wiley & Sons, Ltd.  相似文献   

Return period and risk calculations for ocean wave energy applications     

Mehmet zger  Zekai en 《Ocean Engineering》2008,35(17-18):1700-1706

The statistical behavior of wave energy at a site strongly depends on the wave characteristics. Wave energy converters fail to produce energy when there are no sufficiently available wave heights. Hence, evaluation of return periods and risk values of the minimum wave height becomes important for wave energy studies. A time index representing the minimum wave height is proposed here for ocean wave applications. Persistence plays a significant role in the calculation of return period and risk. Although ignoring the serial independence makes calculations easy, it leads to overestimations of the real status. In this paper, return periods and risk values are compared with each other by taking into consideration independent and dependent situations. Application of the study is achieved for the stations located in the Pacific Ocean and Gulf of Mexico.  相似文献