Analysis of liquefaction susceptibility of nearly saturated sands     

Ahmad Jafari‐Mehrabadi  Majid Abedinzadegan Abdi  Radu Popescu 《国际地质力学数值与分析法杂志》2007,31(5):691-714

A new constitutive formulation for simulating the behaviour of nearly saturated sands under seismic loads is presented. The formulation is based on combining the Henry's law for dissolution of gas in water, the ideal or perfect gas law and the law of conservation of mass. The effects of transient air dissolution in water on the compressibility of partially saturated soils are also taken into account. The model was calibrated based on numerical simulations of isotropically consolidated cyclic triaxial tests conducted on partially saturated samples of Toyoura sand. A multi‐yield plasticity soil constitutive model implemented in the finite element code DYNAFLOW was used for these numerical simulations. It is shown that the formulation proposed here is able to reasonably predict the soil cyclic undrained behaviour at various degrees of saturation (95% and higher). Copyright © 2006 John Wiley & Sons, Ltd.  相似文献   

Impact of spatial correlation of ground motions on seismic damage for residential buildings in Bucharest,Romania     

Pavel  Florin  Vacareanu  Radu  Calotescu  Ileana  Sandulescu  Ana-Maria  Arion  Cristian  Neagu  Cristian 《Natural Hazards》2017,87(2):1167-1187

Natural Hazards - This paper focuses on the investigation of seismic risk for residential buildings situated in Bucharest, the capital city of Romania. With a population of nearly 2 million...  相似文献   

WA-PLS diatom-based pH, TP and DOC inference models from 42 lakes in the Abitibi clay belt area (Québec, Canada)     

Mihaela Enache  Yves T. Prairie 《Journal of Paleolimnology》2002,27(2):151-171

The relationship between surficial sediment diatom species and measured environmental variables was explored in lakes from the Abitibi region of western Quebec. Diatom assemblages in 42 lakes were identified and their relationship with measured environmental variables was examined using multivariate statistical methods. Canonical correspondence analysis with forward selection and Monte Carlo permutation tests revealed that the three environmental variables pH, TP and DOC each accounted for statistically significant fractions of the variation in diatom taxa. A training set with 164 modern diatom taxa was used to derive transfer functions for lake-water pH, TP and DOC using weighted-averaging-partial-least-squares (WA-PLS) techniques. The models were developed to infer lake water pH, TP and DOC within the ranges 4–8 for pH, 2.75–30.0 g l^–1 for TP, and 2.9–18.5 mg l^–1 for DOC. These quantitative inference models may now be used to help identify and estimate the effects of natural disturbances on the biogeochemistry of Abitibi lakes during their historical development.  相似文献   

Digital filtering as a tool for the study of some flysch deposits from the East Carpathians (Romania)     

Radu Botezatu  Mircea Dumitriu 《Mathematical Geology》1972,4(2):103-113

Results from the application of digital filtering (simple and weighted averaging) to the analysis of sedimentary series are given. Two flysch sequences from the East Carpathians (Upper Eocene, Damacua Valley; and Lower Cretaceous, Sbrancani Valley) were studied. Individual components, affecting the conditions of deposition, were separated, and establishment of the geological significance of the components separated by digital filtering was investigated.  相似文献   

Heavy metal contamination in the Arieş river catchment, western Romania: Implications for development of the Roşia Montană gold deposit     

Graham Bird  Paul A. Brewer  Mark G. Macklin  Mihaela Serban  Dan Balteanu  Basarab Driga 《Journal of Geochemical Exploration》2005,86(1):26-48

The Abrud–Arieş river system, western Romania, is subject to ongoing mining activity associated with Cu, Pb and Zn ore extraction. The catchment contains what is believed to be Europe's largest unutilized Au deposit at Roşia Montană that is planned to be exploited by open-cast mining techniques. The magnitude and environmental significance of metal (Cd, Cu, Pb, and Zn) concentrations in surface water and river channel sediment have been investigated along a 140 km reach of the Rivers Abrud and Arieş and 9 tributaries affected by mining. The speciation of sediment-bound metals was established using a 4-stage sequential extraction procedure (SEP) that identified four chemical phases: (1) exchangeable, (2) Fe/Mn oxides, (3) organic matter/sulphides and (4) residual. Peak solute and sediment-bound metal concentrations were found to occur in the River Abrud downstream of the EM Bucium mine and in mining-affected tributaries, with up to 71% of sites containing sediment metal concentrations in excess of Dutch intervention values. The River Arieş was found to be much less polluted than the River Abrud, with only Cu showing concentrations above guideline values, as a consequence of porphyry Cu mineralization in the catchment. The magnitude and spatial extent of metal pollution is influenced by local physico-chemical conditions and hydrological linkages between mining and local river systems. Sediment-bound Cd and Zn were found to be predominantly associated with the exchangeable phase of the sediment (9–74% and 6–65%, respectively), whilst Fe/Mn oxides (5–76%) and organic matter/sulphides (1–45%) generally accounted for a majority of Pb and Cu partitioning, respectively. Sites of environmentally significant sediment-metal pollution were identified in the Rivers Abrud and Arieş where exchangeable metal concentrations exceeded Dutch intervention values. The implications of metal contamination in the Arieş river basin to the proposed mining development at Roşia Montana are discussed in relation to other contaminated Romanian catchments and with the EU Water Framework Directive.  相似文献   

Traveltime computation by wavefront-orientated ray tracing   总被引：1，自引：0，他引：1  

Radu Coman  Dirk Gajewski 《Geophysical Prospecting》2005,53(1):23-36

For multivalued traveltime computation on dense grids, we propose a wavefront‐orientated ray‐tracing (WRT) technique. At the source, we start with a few rays which are propagated stepwise through a smooth two‐dimensional (2D) velocity model. The ray field is examined at wavefronts and a new ray might be inserted between two adjacent rays if one of the following criteria is satisfied: (1) the distance between the two rays is larger than a predefined threshold; (2) the difference in wavefront curvature between the rays is larger than a predefined threshold; (3) the adjacent rays intersect. The last two criteria may lead to oversampling by rays in caustic regions. To avoid this oversampling, we do not insert a ray if the distance between adjacent rays is smaller than a predefined threshold. We insert the new ray by tracing it from the source. This approach leads to an improved accuracy compared with the insertion of a new ray by interpolation, which is the method usually applied in wavefront construction. The traveltimes computed along the rays are used for the estimation of traveltimes on a rectangular grid. This estimation is carried out within a region bounded by adjacent wavefronts and rays. As for the insertion criterion, we consider the wavefront curvature and extrapolate the traveltimes, up to the second order, from the intersection points between rays and wavefronts to a gridpoint. The extrapolated values are weighted with respect to the distances to wavefronts and rays. Because dynamic ray tracing is not applied, we approximate the wavefront curvature at a given point using the slowness vector at this point and an adjacent point on the same wavefront. The efficiency of the WRT technique is strongly dependent on the input parameters which control the wavefront and ray densities. On the basis of traveltimes computed in a smoothed Marmousi model, we analyse these dependences and suggest some rules for a correct choice of input parameters. With suitable input parameters, the WRT technique allows an accurate traveltime computation using a small number of rays and wavefronts.  相似文献   

The Morphological and Optical Properties of Volcanic Glass: A Tool to Assess Density-induced Vertical Migration of Tephra in Sediment Cores     

Mihaela D. Enache  Brian F. Cumming 《Journal of Paleolimnology》2006,35(3):661-667

Volcanic ash layers in sediment cores are valuable geochronological markers in paleolimnological research. The composition of volcanic glass is related to identifiable, chronologically distinctive volcanic eruptions. Consequently, tephra layers provide time horizons allowing regional-scale correlations for lake sediments. Volcanic glass is often present in samples routinely prepared by paleolimnologists such as diatom slides and thin sections. Knowledge of the morphological and optical properties of volcanic glass allows for its identification. This is essential for the identification of ash layers that are not macroscopically visible or to track their vertical migration in soft organic sediments. The purposes of this note are to: (1) describe how the morphological (i.e., shape, vesicularity) and optical (i.e., refractive index and birefringence) properties can be used to identify volcanic glass in preparations from lake sediments; and (2) show how the quantification of volcanic glass from diatom slides is used to quantify the density-induced displacement of a 4.5 cm-thick Mazama ash-layer through organic sediments and to approximate its timing of initial deposition.  相似文献   

Robust iterative schemes for non-linear poromechanics     

Manuel Borregales  Florin A. Radu  Kundan Kumar  Jan M. Nordbotten 《Computational Geosciences》2018,22(4):1021-1038

We consider a non-linear extension of Biot’s model for poromechanics, wherein both the fluid flow and mechanical deformation are allowed to be non-linear. Specifically, we study the case when the volumetric stress and the fluid density are non-linear functions satisfying certain assumptions. We perform an implicit discretization in time (backward Euler) and propose two iterative schemes for solving the non-linear problems appearing within each time step: a splitting algorithm extending the undrained split and fixed stress methods to non-linear problems, and a monolithic L-scheme. The convergence of both schemes are shown rigorously. Illustrative numerical examples are presented to confirm the applicability of the schemes and validate the theoretical results.  相似文献   

The influence of direct solar radiation pressure on the nodal period of artificial earth satellites     

V. Mioc  E. Radu 《Astronomische Nachrichten》1977,298(2):107-110

Approximate formulae for the evaluation of the effect of direct solar radiation pressure (neglecting the POYNTING -ROBERTSON effect and shadow effect) on the nodal period of artificial Earth satellites with quasi-circular orbits are derived. The cases of osculating elements considered in the ascending node and of circular orbits are studied.  相似文献