Research note: deblended-data reconstruction using generalized blending and deblending models     

Tomohide Ishiyama  Mohammed Y. Ali  Satoshi Ishikawa  Gerrit Blacquiere  Shotaro Nakayama 《Geophysical Prospecting》2019,67(7):1852-1866

We introduce a concept of generalized blending and deblending, develop its models and accordingly establish a method of deblended-data reconstruction using these models. The generalized models can handle real situations by including random encoding into the generalized operators both in the space and time domain, and both at the source and receiver side. We consider an iterative optimization scheme using a closed-loop approach with the generalized blending and deblending models, in which the former works for the forward modelling and the latter for the inverse modelling in the closed loop. We applied our method to existing real data acquired in Abu Dhabi. The results show that our method succeeded to fully reconstruct deblended data even from the fully generalized, thus quite complicated blended data. We discuss the complexity of blending properties on the deblending performance. In addition, we discuss the applicability to time-lapse seismic monitoring as it ensures high repeatability of the surveys. Conclusively, we should acquire blended data and reconstruct deblended data without serious problems but with the benefit of blended acquisition.  相似文献   

Stress distribution from railway track over geogrid reinforced ballast underlain by clay     

Fattah  Mohammed Y.  Mahmood  Mahmood R.  Aswad  Mohammed F. 《地震工程与工程振动(英文版)》2019,18(1):77-93

Railway ballast forms a major component of a conventional rail track and is used to distribute the load to the subgrade, providing a smooth running surface for trains. It plays a significant role in providing support for the rail track base and distributing the load to the weaker layer underneath. Ballast also helps with drainage, which is an important factor for any type of transportation structure, including railroads. Over time, ballast progressively deforms and degrades under dynamic loading and loses its strength. In this study, extensive laboratory tests were conducted to investigate the effect of load amplitude, geogrid position, and number of geogrid layers, thickness of ballast layer and clay stiffness on the behavior of the reinforced ballast layer and induced strains in a geogrid. A half full-scale railway was constructed for carrying out the tests, which consisted of two rails 800 mm in length with three wooden sleepers(900 mm × 10 mm × 10 mm). Three ballast thicknesses of 200, 300 and 400 mm were used in the tests. The ballast was overlying 500 mm thickness clay in two states, soft and stiff. The tests were carried out with and without geogrid reinforcement; the tests were performed in a well-tied steel box of 1.5 m length ×1 m width ×1 m height. Laboratory tests were conducted to investigate the response of the ballast and the clay layers where the ballast was reinforced by a geogrid. Settlement in ballast and clay, soil pressure and pore water pressure induced in the clay were measured in reinforced and unreinforced ballast cases. It was concluded that the amount of settlement increased as the simulated train load amplitude increased, and there was a sharp increase in settlement up to cycle 500. After that, there was a gradual increase that leveled out between, 2500 to 4500 cycles depending on the frequency used. There was a slight increase in the induced settlement when the load amplitude increased from 0.5 to 1 ton but it was higher when the load amplitude increased to 2 tons. The increased amount in settlement depended on the existence of the geogrid and other parameters studied. The transmitted average vertical stress for ballast thicknesses of 30 cm and 40 cm increased as the load amplitude increased, regardless of the ballast reinforcement for both soft and stiff clay. The position of the geogrid had no significant effect on the transmitted stresses. The value of the soil pressure and pore water pressure on ballast thicknesses of 20 cm was higher than for 30 cm and 40 cm thicknesses. This meant that the ballast attenuated the induced waves. The soil pressure and pore water pressure for reinforced and unreinforced ballast was higher in stiff clay than in soft clay.  相似文献   

Weakly compressible SPH simulation of cnoidal waves with strong plunging breakers     

Sarfaraz  Mohammad  Pak  Ali 《Ocean Dynamics》2019,69(6):657-678

Ocean Dynamics - Hydrodynamics of highly nonlinear cnoidal waves and their subsequent strong plunging breakers are among the least understood and most significant issues in coastal engineering. In...  相似文献   

Types and nature of fracture associated with Late Ordovician paleochannels of glaciofluvial Sarah Formation,Qasim region,Central Saudi Arabia     

Jarrah Mohammed Ahmed Babiker  Mustafa Mohammed Hariri  Osman Abdullatif  Gabor Korvin 《Arabian Journal of Geosciences》2017,10(6):146

This study evaluates the Late Ordovician glaciofluvial deposits of the Sarah Formation and equivalent outcroppings in north, central, and southwestern Saudi Arabia. The Sarah Formation also covers a wide area in the subsurface and is considered as an important target for unconventional tight gas reservoir. Defining the fracture types, nature, and distribution in outcrop scale might help to establish a successful fracture simulation model and behavior for the Sarah tight gas reservoir in the subsurface. This study investigates fracture characteristics for the Sarah Formation at Sarah paleochannel outcrops. The study revealed three sets of fractures, which have EW, NS, and SE-NW directions, and these fractures vary from open, resistive, and filled to resistive fractures. The closed fractures are filled with ferruginated iron oxides and gypsum. The filled fractures (the thrust boundary) are found in the study area at the SE-NW strike fracture set, while open and resistive fractures are found mainly at S-N and E-W fracture sets, respectively. The syn-depositional filled fractures (iron oxides) are considered as the younger fracture sets while the open and resistive fractures are post-depositional fractures which may have resulted from uplift or tectonic movement. A general model representing the fracture pattern and the thrusting boundaries due to glacial movement was constructed. It has been noticed that the systematic occurrence of filled fractures (thrust boundaries) described the boundaries between different glacial events, which act as a fluid barrier (filled fractures) and decrease the reservoir quality. The finding of this study might be utilized as a guide and lead for exploration in the subsurface Sarah glacial deposits. It will also help to understand and speculate the nature pattern and distribution of fractures with the Sarah Formation.  相似文献   

Application of a 3D photorealistic model for the geological analysis of the Permian carbonates (Khuff Formation) in Saudi Arabia     

Mansour S. Alhumimidi  Mohammed S. Alfarhan  Jarvis R. Cline  Carlos L. V. Aiken 《Arabian Journal of Geosciences》2017,10(5):112

Three dimensional (3D) photorealistic models of geological outcrops have the potential to enhance the teaching of earth sciences by providing scale models in a virtual reality environment. These models can be run on low-cost desktop computers. Photorealistic models for geological outcrops are a digital illustration of outcrop photographs with either a point cloud representation or Triangular Irregular Network (TIN) mesh of the outcrop surface. The level of detail for these models is dependent on the target resolutions (physical and optical) that were used during data acquisition. In addition, the technique in which the data is rendered as a digital model affects the level of detail that can be observed by the geologists. A colored point cloud representation is suitable for large-scale features, but fine details are lost when the geologist zooms in to view the model close up. In contrast, a photorealistic model that is constructed from photographs draped onto a triangle mesh surface derived from Light Detection and Ranging (LiDAR) point clouds provides a level of detail that is restricted only by the resolution of the photographs.  相似文献   

Discussion of “Interfacing the geographic information system,remote sensing,and the soil conservation service-curve number method to estimate curve number and runoff volume in the ASIR region of Saudi Arabia” by Fawzi S. Mohammad,Jan Adamowski     

Ayman G. Awadallah  Mahmoud S. Farahat  Mohammed Haggag 《Arabian Journal of Geosciences》2017,10(9):214

The soil conservation service curve number (SCS-CN) method is one of the most commonly used methods to compute the direct runoff from a rainfall event. Since the method was established, numerous researches were undertaken to improve the method through accurate estimation of its parameter and especially the curve number (CN). However, the essence of the SCS method, as an event-based Hortonian mechanism method, remained unchanged. The main assumption of the method related to the rainfall input is that the rainfall is continuous in time and uniform over the watershed. Mohammad and Adamowski (2015) paper apparently used the SCS method to estimate the annual runoff using the annual rainfall as one cumulative rainfall input value, which is a violation of the event-based principle of the method and of the assumption of the continuity of the rainfall event.To re-estimate the average annual runoff more realistically for the Asir region, Saudi Arabia, daily rainfall data from 14 rainfall stations are used for calculating the resulting runoff depths, on a daily event-by-event rainfall basis, throughout the whole simulation period. The resulting runoff depths are added for each year, and the total cumulative annual runoff values for each year are averaged to get the average annual runoff. The runoff values based on the previously mentioned procedure are an upper limit of the actual average annual runoff as the underlying SCS equations discard evaporation and similar long-term losses. Nevertheless, the average runoff values obtained in the discussion paper are an order of magnitude (at least five to tenfold) lower than the ones of the original paper. An equation is proposed to obtain a more realistic estimate of the average annual runoff, to be used with the average annual rainfall as an input, if the annual value is the only available rainfall information.  相似文献   

Temporal change of glaciers area and geomorphometric parameters in Parbati valley,Himachal Pradesh,India     

Sarfaraz Ahmad  Khatib Khan  Nepal Singh  Zabiullah Ansari  Md. Mulhim 《Environmental Earth Sciences》2017,76(11):407

Temporal change in the glacier coverage is analyzed for the period between 1962 and 2003 in Parbati valley, Himachal Pradesh. It is observed that the total glacier cover has been decreased by 17% ranging between 8 and 100% for individual glacier. The pattern of de-glaciation shows a high degree of shrinkage in outer zone of Parbati valley, while least shrinkage is observed in the inner valley. The present study is conducted to establish relationship between glacio-geomorphic parameters and glaciers shrinkage pattern to predict the future glacier cover in warming scenario. A systematic change is observed for glacio-geomorphic parameters associated with temporal change in glacier cover. It is observed that mean and minimum elevation, slope, relief and duration of insolation have changed substantially. Maximum elevation, plan/profile curvatures and aspect have shown less change from 1962 to 2003. A correlation matrix between glacio-geomorphic parameters for glaciers between 1962 and 2003 shows that the recent glaciers are much more controlled by terrain characteristics than that in the recent past.  相似文献   

Studying the impacts of groundwater evolution on the environment,west Qena city,Egypt     

Saad Ahmed Mohallel  Mohammed Ahmed Gomaa 《Arabian Journal of Geosciences》2017,10(16):372

The current research has been conducted to evaluate groundwater aquifers qualitatively in the area located in the Western side of Qena city. The Quaternary aquifer represents the main groundwater source in the study area. It exists under unconfined to semiconfined conditions at depths varying between 4 m due North and 80 m in the South. The chemical analyses of the groundwater samples indicate that 77% of the total samples are fresh and 20% are brackish, while only 3% are saline. In addition, the iso-salinity contour map indicates that the salinity increases towards the central and northern parts of the study area. The total and permanent hardness increase as water salinity increases and vice versa in case of temporary hardness in the groundwater samples. The chemical water types and the ion ratios indicate meteoric origin of groundwater as well as the dissolution of terrestrial and marine salts. The contribution of recent recharge from the River Nile to a few groundwater wells in the study area varies from low to high. In addition, the most recharge sources are from the precipitation. Nitrate concentrations in groundwater increase towards the central and Northern areas significantly elevated in response to increasing anthropogenic land uses. Much of the solutes and physicochemical parameters in these waters are under the undesirable limits of World Health Organization (WHO) for drinking purpose, and a plot of sodium adsorption ratio versus EC shows that about 23% of the groundwater samples are good water quality, about 45% of groundwater samples are moderate quality, and 23% of the groundwater samples are intermediate water class, while the rest of samples (9%) are out of the range.  相似文献   

An isolation system for limited seismic gaps in near‐fault zones          下载免费PDF全文

Mohammed Ismail 《地震工程与结构动力学》2015,44(7):1115-1137

The ability of a recently proposed seismic isolation system, with inherent self‐stopping mechanism, to mitigate or even eliminate seismic pounding of adjacent structures is investigated under severe near‐fault earthquakes. The isolation system is referred to as roll‐in‐cage (RNC) isolator. It is a rolling‐based isolator that provides in one unit the necessary functions of vertical rigid support, horizontal flexibility with enhanced stability, hysteretic energy dissipation, and resistance to minor vibration loads. In addition, the RNC isolator is distinguished by a self‐stopping (buffer) mechanism to limit the bearing displacement under excitations stronger than a design earthquake or at limited seismic gaps, and a linear gravity‐based self‐recentering mechanism to prevent permanent bearing displacement without causing vertical fluctuation of the isolated structure. A previously developed multifeature SAP2000 model of the RNC isolator is improved in this paper to account for the inherent buffer mechanism's damping. Then, the effectiveness of the isolator's buffer mechanism in limiting peak bearing displacements is studied together with its possibly arising negative influence on the isolation efficiency. After that, the study investigates how to alleviate or even eliminate those possibly arising drawbacks, due to the developed RNC isolator's inner pounding as a result of its buffer activation, to achieve efficient seismic isolation with no direct structure‐to‐structure pounding, considering limited seismic gaps with adjacent structures and near‐fault earthquakes. The results show that the RNC isolator could be an efficient solution for aseismic design in near‐fault zones considering limited seismic gaps. Earthquake Engineering and Structural Dynamics. Copyright © 2014 John Wiley & Sons, Ltd.  相似文献   

Prediction of magnitude of the largest potentially induced seismic event   总被引：1，自引：0，他引：1  

Miroslav Hallo  Ivo Oprsal  Leo Eisner  Mohammed Y. Ali 《Journal of Seismology》2014,18(3):421-431

We propose a method for determining the possible magnitude of a potentially largest induced seismic event derived from the Gutenberg–Richter law and an estimate of total released seismic moment. We emphasize that the presented relationship is valid for induced (not triggered) seismicity, as the total seismic moment of triggered seismicity is not bound by the injection. The ratio of the moment released by the largest event and weaker events is determined by the constants a and b of the Gutenberg–Richter law. We show that for a total released seismic moment, it is possible to estimate number of events greater than a given magnitude. We determine the formula for the moment magnitude of a probable largest seismic event with one occurrence within the recurrence interval (given by one volumetric change caused by mining or injecting). Finally, we compare theoretical and measured values of the moment magnitudes of the largest induced seismic events for selected geothermal and hydraulic fracturing projects.  相似文献