Optimization and Parametrical Investigation to Assess the Reconstitution of Different Types of Indian Sand Using Portable Travelling Pluviator     

V.?Srinivasan  Shubham?Srivastava  Priyanka?GhoshEmail author 《Geotechnical and Geological Engineering》2016,34(1):59-73

By using the air pluviation technique, it is aimed to achieve the desired relative density with uniform void ratio throughout the specimen in order to maintain the homogeneity and to avoid the spatial variability. Further, in order to achieve the maximum deposition intensity, a systematic optimization study has been carried out rigorously in a test tank to determine the diameter of the orifice to be employed for the sieve plates of different porosity and the number of sieve plates to be installed in the diffuser sieve sets. The study has been conducted with four different patterns of sieves with different porosity to achieve a wide range of relative densities for four different uniformly graded Indian sands. The dynamic penetrometer which is considered to be one of the cost effective instruments has been efficiently used to determine the soil resistance at various locations of the test tank for every given height of fall in order to check the uniformity of placement density throughout the sand bed. The study reveals that the sand beds of different relative densities could be achieved using different patterns of diffuser sieves at optimum sand flow rate without compromising the uniformity. The effect of height of fall as well as porosity of diffuser sieves on the relative density of different sands has been studied in detail. The deposition intensity and the relative density obtained from the present study are compared with the values available in the literature.  相似文献   

Assessment and Prediction of Liquefaction Potential Using Different Artificial Neural Network Models: A Case Study     

Abbas?Abbaszadeh ShahriEmail author 《Geotechnical and Geological Engineering》2016,34(3):807-815

Soil liquefaction as a transformation of granular material from solid to liquid state is a type of ground failure commonly associated with moderate to large earthquakes and refers to the loss of strength in saturated, cohesionless soils due to the build-up of pore water pressures and reduction of the effective stress during dynamic loading. In this paper, assessment and prediction of liquefaction potential of soils subjected to earthquake using two different artificial neural network models based on mechanical and geotechnical related parameters (model A) and earthquake related parameters (model B) have been proposed. In model A the depth, unit weight, SPT-N value, shear wave velocity, soil type and fine contents and in model B the depth, stress reduction factor, cyclic stress ratio, cyclic resistance ratio, pore pressure, total and effective vertical stress were considered as network inputs. Among the numerous tested models, the 6-4-4-2-1 structure correspond to model A and 7-5-4-6-1 for model B due to minimum network root mean square errors were selected as optimized network architecture models in this study. The performance of the network models were controlled approved and evaluated using several statistical criteria, regression analysis as well as detailed comparison with known accepted procedures. The results represented that the model A satisfied almost all the employed criteria and showed better performance than model B. The sensitivity analysis in this study showed that depth, shear wave velocity and SPT-N value for model A and cyclic resistance ratio, cyclic stress ratio and effective vertical stress for model B are the three most effective parameters on liquefaction potential analysis. Moreover, the calculated absolute error for model A represented better performance than model B. The reasonable agreement of network output in comparison with the results from previously accepted methods indicate satisfactory network performance for prediction of liquefaction potential analysis.  相似文献   

基于热模拟实验的富有机质泥页岩成岩作用及演化特征   总被引：1，自引：0，他引：1  

栾国强  董春梅  马存飞  林承焰  张津营  吕夏霏  Muhammad Aleem Zahid 《沉积学报》2016,34(6):1208-1216

富有机质泥页岩蕴含丰富的油气资源,但成岩研究基础薄弱,已成为制约页岩油气勘探开发进程的重要因素。通过开展成岩热模拟实验,结合扫描电镜观察、流体成分测试及有机酸测试等实验测试手段,全面描述实验过程中所发生的水-岩化学反应,试图揭示泥页岩成岩过程及成岩演化规律。研究结果显示,有机质热演化过程中存在一个较宽的有机酸生成窗口,对孔隙流体性质具有重要影响;长石和方解石存在接力溶蚀现象,长石溶蚀高峰过后紧接着出现方解石溶蚀高峰,但方解石溶蚀窗较窄,此后出现方解石重新沉淀结晶;黏土矿物转化及长石的溶蚀过程中会产生大量自生微晶石英,成链状或簇状胶结泥页岩骨架。泥页岩地层作为一个相对封闭体系,各类成岩作用之间相互关联,相互影响,构成错综复杂的成岩体系,进一步增加其成岩作用研究难度。  相似文献   

Assessing groundwater storage changes in the Nubian aquifer using GRACE data     

Ahmed M. Yosri  Mohamed A. Abd-Elmegeed  Ahmed E. Hassan 《Arabian Journal of Geosciences》2016,9(10):567

Gravity Recovery and Climate Experiment (GRACE) level two (L2) data is used in estimating the groundwater storage changes (GWSC) in the Nubian Sandstone Aquifer System (NSAS). This set of data consists of spherical harmonics coefficients with specific degree and order. The GRACE data is de-correlated using a sixth degree polynomial in order to reduce the effect of the noise error resulting from the correlation between the spherical harmonics coefficients with the same degree parity. The GRACE estimates of GWSC are smoothed using Gaussian filter with half width of 1000 km. This half width is chosen in order to maximize the correlation between the GRACE estimates of GWSC and previous modeling results of the NSAS. The loss in groundwater storage occurring in each of the four countries sharing the NSAS is calculated to assess the sustainability of using the NSAS as a water resource in each country. The overarching finding in this study is that NSAS is losing its groundwater storage at a very high rate. Also, it is found that Egypt is the fastest in losing its groundwater storage from the NSAS. This loss of groundwater storage in Egypt may not necessarily be resulting from in-country extractions because of the trans-boundary nature of this aquifer. The GRACE-based estimates are found to be close to available data and previous modeling results of the NSAS.  相似文献   

Benthic foraminifera in sandy (siliciclastic) coastal sediments of the Arabian Gulf (Saudi Arabia): a technical report     

Arslan  Muhammad  Kaminski  Michael A.  Tawabini  Bassam S.  Ilyas  Muhammad  Frontalini  Fabrizio 《Arabian Journal of Geosciences》2016,9(4):1-22

The Uromia–Dokhtar Magmatic Arc (UDMA) is a northwest–southeast trending magmatic belt which is formed due to oblique subduction of Neotethys underneath Central Iran and dominantly comprises magmatic rocks. The Jebal-e-Barez Plutonic Complex (JBPC) is located southeast of the UDMA and composed of quartz diorite, granodiorite, granite, and alkali granite. Magmatic enclaves, ranging in composition from felsic to mafic, are abundant in the studied rocks. Based on the whole rock and mineral chemistry study, the granitoids are typically medium-high K calc-alkaline and metaluminous to peraluminous that show characteristics of I-type granitoids. The high field strength (HFS) and large ionic radius lithophile (LIL) element geochemistry suggests fractional crystallization as a major process in the evolution of the JBPC. The tectonomagmatic setting of the granitoids is compatible with the arc-related granitic suite, a pre-plate collision granitic suite, and a syncollision granitic suite. Field observations and petrographic and geochemical studies suggest that the rocks in this area are I-type granitoids and continental collision granitoids (CCG), continental arc granitoids (CAG), and island arc granitoid (IAG) subsections. The geothermobarometry based on the electron probe microanalysis of amphibole, feldspars, and biotite from selected rocks of JBPC implies that the complex formed at high-level depths (i.e., 9–12 km; upper continental crust) and at temperatures ranging from 650 to 750 °C under oxidation conditions. It seems that JBPC is located within a shear zone period, and structural setting of JBPC is extensional shear fractures which are product of transpression tectonic regime. All available data suggested that these granitoids may be derived from a magmatic arc that was formed by northeastern ward subduction of the Neotethyan oceanic crust beneath the Central Iran in Paleogene and subsequent collision between the Arabian and Iranian plates in Miocene.

  相似文献   

Reconstruction of Holocene paleohydrological and sedimentological characteristics of Umm Ar-Rimam basin (northern Kuwait)     

Adeeba?Al-HurbanEmail author  Michael?J.?Duane 《Arabian Journal of Geosciences》2016,9(13):621

The paleohydrological and sedimentological characteristics of a playa lake in northern Kuwait (Arabian Gulf) are reconstructed using sedimentological, geochemical, and isotopic techniques. The sequence consists of up to 8 cycles of S-poor, alluvial sediments capped by a thin organic soil interbedded with gravity-fall calcrete sediments. The succession is locally derived from mainly Quaternary sediments and is regressive with upsection filling of the subsiding basin by cycles of sheetwash flow in response to climatic change. There is no natural, open-water lake water as indicated by low total organic carbon (TOC) data, but the presence of incised calcrete yardangs suggests that more extensive open-water conditions were operative in the past. Stable isotope (δ¹⁸O‰ and δ¹³C‰) values of the authigenic carbonates indicate the following three distinct processes: evaporation, meteoric fluid infiltration, and rapid per-descensum flow (rapid downward movement of water and playa sediment through pipes) through a porous, clastic sequence. Because evaporites are scarce, other factors besides evaporation action control chemical and isotopic compositions of the per-decensum lake fluids. Consequently, the isotopic composition cannot be interpreted exclusively as an indicator of salinity or evaporation ratio. The degassing of CO₂ during groundwater discharge may explain the enriched carbon isotope values for the authigenic carbonates precipitated in the sediments. Hydrologically closed lake water bodies tend to show low negative carbonate oxygen and carbon isotopic signatures. Isotopically negative δ¹³C values imply a strong input of soil-zone carbon to the groundwater of the top 60 cm of the sediment. Lakes that are hydrologically closed and evaporate or equilibrate with atmospheric CO₂ will tend to have low negative δ¹⁸O and δ¹³C values in the carbonates as reported by Talbot (Chem Geol: Isotope Geosci Sect 80(4):261–279, 1990). Biologically active lakes will tend toward lower δ¹³C of dissolved carbon due to the photosynthetic effects of ¹²C withdrawal as reported by Dunagan and Driese (J Sed Res 69:772–783, 1999). Increased biological activity during sedimentation may account for low carbon isotope values where plants were abundant, but in shrinkage-dominated systems (those of clay-rich soil subjecting to wet-dry conditions), carbon isotopes will be largely inherited from the calcretic limestones in the land extending landward of the coast and not influenced by coastal processes (known as hinterland), such as Umm Ar-Rimam depression. This basin does not fit the classic shallow playa-type basins of the Arabian Peninsula but rather the recharge playas of the southwestern USA.  相似文献   

Tectono-sedimentary evolution of the Miocene Oued Dayr Formation (Ghomaride Complex,Internal Domain of the Maghrebian Rif Belt,Morocco)     

Bilal?El OuaragliEmail author  Mohamed?Najib?Zaghloul  Hajar?El Talibi  Roberta?Somma 《Arabian Journal of Geosciences》2016,9(15):660

This work deals with sedimentological, petrographic, and structural analyses of a middle Miocene late-orogenic sedimentary cycle, denoted Oued Dayr Formation, recognized in the Rifian sector of the Maghrebian Chain (Morocco). The analyzed Formation (75 m thick) starts with 15–20 m of light colored polymict conglomerates, with minor sandstone beds, lying on the Paleozoic basement and Mesozoic cover of the Ghomaride Nappe. Facies analysis indicates a fining-upward deposition in a marine environment characterized by increasing deepening, reflecting a subsidence rate that exceeds sedimentary supply. Petrographic analysis points out that sandstones are represented by litharenites originated by erosion of recycled orogen. The conglomerates pebbles and cobbles consist of Alpine low- to high-grade metamorphic rocks as metarenites, phyllites, mylonitic quartzites, micaschists, augen gneisses deriving from the exhumed deep metamorphic basement, the overlying metasedimentary of the Sebtide Nappes and of sedimentary rocks as sandstones, jaspes, limestones, and shales deriving from the Ghomaride Nappes and their sedimentary cover. Data reveal mixed provenance indicating that the Oued Dayr Formation was fed by the Internal Nappes stack of the Maghrebian Chain. Structural analysis shows that the Oued Dayr Formation accumulated in a Thrust-Top basin, during an early extension (D₀ phase), recorded by synsedimentary normal faults within middle Langhian deposits on the rear of the Internal Nappes stack. Subsequent ductile and brittle compressional (D₁, D₂, D₃) and extensional (D₄) deformation phases occurred during and/or after the stacking, exhumation, and early unroofing of Sebtide Complex coeval with the opening of the western Mediterranean back-arc basins since middle Miocene time.  相似文献   

Sensitivity analysis for the GALDIT method based on the assessment of vulnerability to pollution in the northern Sfax coastal aquifer,Tunisia   总被引：1，自引：0，他引：1  

Mona?GontaraEmail author  Nabila?Allouche  Ikram?Jmal  Salelm?Bouri 《Arabian Journal of Geosciences》2016,9(5):416

Coastal aquifer of northern Sfax (Tunisia) suffers from the high risk to seawater intrusion and the water quality degradation due to the overexploitation. Hence, assessing the study area vulnerability to pollution is highly crucial so as to protect the groundwater resources. The assessment has been performed by applying the GALDIT method using Geographic Information System (GIS) software and multi-criteria evaluation techniques, and the sensitivity analysis approach to evaluate the effect of each GALDIT parameter on the vulnerability assessment. The GALDIT vulnerability map classifies the study area into three vulnerability classes: low vulnerability (30–50), moderate vulnerability (50–70), and high vulnerability (70–90), which represent 5, 30, and 65 % of the study area, respectively. The map illustrates that the coastal zones of the aquifer are the most threatened areas. The sensitivity analysis results show that the aquifer hydraulic conductivity (A) and the thickness of the aquifer (T) represent the determining factors in the modified vulnerability model. The real weight was used to elaborate the modified GALDIT model which was correlated with resistivity values for validation. This study could serve as a scientific basis for sustainable land planning and groundwater management in the study area.  相似文献   

<Emphasis>H</Emphasis>ydrological variability of the <Emphasis>S</Emphasis>oummam watershed <Emphasis>(N</Emphasis>ortheastern <Emphasis>A</Emphasis>lgeria<Emphasis>)</Emphasis> and the possible links to climate fluctuations     

Imen?TurkiEmail author  Benoit?Laignel  Nicolas?Massei  Zeneddine?Nouaceur  Nadir?Benhamiche  Khodir?Madani 《Arabian Journal of Geosciences》2016,9(6):477

The long-term variability of rainfall in the Soummam watershed (NE Algeria) has been analysed over the past 108 years using continuous wavelet method in order to identify the interannual modes controlling the rainfall variability. Statistical analyses of rainfall timeseries have shown its distribution following five periods of time, limited by a series of discontinuities around 1935, 1950, 1970 and 1990. The continuous wavelet transform have demonstrated different low frequency modes: 2–4, 4–8, 8–16 and 16–32 years.The annual band is expanded during the full study period with some pics around 1905, 1920–1935 and 1960; it shows a negative long-term trend, in particular since the period 1970–1990 when a major change has been identified. Then, the relationships between climate patterns of North Atlantic Oscillation (NAO) and Southern Oscillation Index (SOI) and the hydrological variability in the frequency domain have been investigated; they have shown a mean explained variance of 40 and 24 %, respectively. Such variances are less obvious for the annual mode and increase for the interannual frequencies. The coherence suffer from high perturbations since the period 1970–1990 when the NAO (SOI) shifts from negative (positive) phases to positive (negative) ones. Such anomalies are responsible for significant changes of rainfall variability, emphasising the global warming effects.  相似文献   

Investigation of moment-rotation relation in different joint types and evaluation of their effects on segmental tunnel lining     

Abbas?Majdi  Hamed?Ajamzadeh  Siavash?NadimiEmail author 《Arabian Journal of Geosciences》2016,9(7):512

This paper presents the results of a numerical study that has been performed to investigate the different joint types that affect the moment-rotation relation and ultimate bending moment capacity of a joint. A 3D finite element method was adapted to establish elaborate numerical models of segments. To evaluate the possible differences in moment-rotation behavior between different joint types, 10 different joint types were simulated. Additionally, the effect of different joint types on behavior of a lining ring was investigated. The validity of the peridynamic simulation was tested by comparing results obtained in this paper against the results obtained in a study performed by Hordijk and Gijsbers. Observations of the results demonstrate that in a flat joint, the expanding of joint height increased the rotation stiffness of the joint in the linear branch, and accordingly, the ultimate bending moment of the joint increased. In the ring model, it was observed that the expanding of joint height led to the decreased of ring displacement and stress concentration in the joint. Whenever there were full surface contacts (contact two segment in total cross section) in the joints, the rotation stiffness of the joints in the linear branch became equal, and, as a result, the displacement in the ring model was the same in all joint types. In addition, it was observed that using a convex joint in the ring model increases the displacement of the ring. The ultimate bending moment of bolted joints was higher than that of joints without bolts, especially in the case of a negative moment.  相似文献