Slope topography-induced spatial variation correlation with observed building damages in Corso during the May 21, 2003, <Emphasis Type="Italic">M</Emphasis><Subscript><Emphasis Type="Italic">w</Emphasis></Subscript> 6.8, Boumerdes earthquake (Algeria)     

Akila Messaoudi  Nasser Laouami  Nourredine Mezouar 《Journal of Seismology》2017,21(4):647-665

During the May 21, 2003 M _w 6.8 Boumerdes earthquake, in the “Cité des 102 Logements” built on a hilltop, in Corso, heavy damages were observed: near the crest, a four-story RC building collapsed while others experienced severe structural damage and far from the crest, slight damage was observed. In the present paper, we perform a 2D slope topography seismic analysis and investigate its effects on the response at the plateau as well as the correlation with the observed damage distribution. A site-specific seismic scenario is used involving seismological, geological, and geotechnical data. 2D finite element numerical seismic study of the idealized Corso site subjected to vertical SV wave propagation is carried out by the universal code FLUSH. The results highlighted the main factors that explain the causes of block collapse, located 8-26 m far from the crest. These are as follows: (i) a significant spatial variation of ground response along the plateau due to the topographic effect, (ii) this spatial variation presents high loss of coherence, (iii) the seismic ground responses (PGA and response spectra) reach their maxima, and (iv) the fundamental frequency of the collapsed blocks coincides with the frequency content of the topographic component. For distances far from the crest where slight damages were observed, the topographic contribution is found negligible. On the basis of these results, it is important to take into account the topographic effect and the induced spatial variability in the seismic design of structures sited near the crest of slope.  相似文献   

An axi-symmetric infinite element for transient radial flow problems     

N. Khalili  S. Valliappan  M. Yazdchi 《国际地质力学数值与分析法杂志》1999,23(8):801-813

The formulation of an axi-symmetric infinite element for transient analysis of flow problems in unbounded domain is presented. The theoretical basis as well as the implementation of the element is discussed, and the element decay function is derived using the analytical solution of a one-dimensional axially symmetric configuration. The form of decay within the element is described as a function of both time and space, and thus the hydraulic head distribution in the far field is simulated rigorously. The accuracy and the efficiency of the proposed element are demonstrated through several numerical examples in infinite media. In general, it is shown that using the present infinite element transient flow problems in unbounded domains can be simulated effectively. Copyright © 1999 John Wiley & Sons, Ltd.  相似文献   

Preliminary estimation of the tsunami hazards associated with the Makran subduction zone at the northwestern Indian Ocean   总被引：3，自引：3，他引：0  

Mohammad Heidarzadeh  Moharram D. Pirooz  Nasser H. Zaker  Ahmet C. Yalciner 《Natural Hazards》2009,48(2):229-243

We present a preliminary estimation of tsunami hazard associated with the Makran subduction zone (MSZ) at the northwestern Indian Ocean. Makran is one of the two main tsunamigenic zones in the Indian Ocean, which has produced some tsunamis in the past. Northwestern Indian Ocean remains one of the least studied regions in the world in terms of tsunami hazard assessment. Hence, a scenario-based method is employed to provide an estimation of tsunami hazard in this region for the first time. The numerical modeling of tsunami is verified using historical observations of the 1945 Makran tsunami. Then, a number of tsunamis each resulting from a 1945-type earthquake (M _w 8.1) and spaced evenly along the MSZ are simulated. The results indicate that by moving a 1945-type earthquake along the MSZ, the southern coasts of Iran and Pakistan will experience the largest waves with heights of between 5 and 7 m, depending on the location of the source. The tsunami will reach a height of about 5 m and 2 m in northern coast of Oman and eastern coast of the United Arab Emirates, respectively.  相似文献   

A Lattice Spring Model for Coupled Fluid Flow and Deformation Problems in Geomechanics     

GaoFeng Zhao  Nasser Khalili 《Rock Mechanics and Rock Engineering》2012,45(5):781-799

A lattice spring model is developed for coupled fluid flow and deformation problems. The model has an underlying structure consisting of particles connected by springs for the solid and fluid bubbles, connected by fluid pipelines for fluid flow. Formulations of the model to describe the coupled fluid flow and deformation behavior of a solid are derived. A few examples of consolidation problems are presented and compared with analytical solutions with good agreement being obtained, which means that the lattice model developed in this study can correctly simulate the coupled fluid flow and deformation response of a solid.  相似文献   

Geochemistry, petrogenesis and radioactivity of El Hudi I-type younger granites, South Eastern Desert, Egypt     

Ashraf Emam  Nasser M. Moghazy  Anas M. El-Sherif 《Arabian Journal of Geosciences》2011,4(5-6):863-878

The present study deals with geochemical characteristics and petrogenesis of three younger granite varieties (coarse-grained biotite-muscovite granites (CBG), garnetiferous muscovite granites (GMG) and Abu Aggag biotite granites (AAG)) in El-Hudi area, east of Aswan, southeastern desert of Egypt. Mineral chemistry and whole rock chemistry data revealed that all granites have high SiO₂ (70.8-74.7 wt.%), Al₂O₃ (12.8-14.3 wt.%), Na₂O and K₂O (>3.2 wt.%) contents with high Na₂O/K₂O ratios (～>1). Plagioclase feldspars range in composition from albite to oligoclase (An_9-27) in CBG, oligoclase (An_13-18) in GMG and albite (An_2-6) in AAG. Potash feldspars are mainly perthitic microcline and exhibit chemical formulae as (Or_93-96 Ab_7-4 An₀) in CBG, (Or_95-98 Ab_5-2 An₀) in GMG and (Or_82-98 Ab_18-2 An₀) in AAG. Biotites from CBG and GMG are enriched in (Mg and Ti) and depleted in (Al, Fe, Mn and K) compared with those of AAG. Biotites from CBG and GMG had been derived from calc-alkaline magma, whereas those from AAG had been derived from peraluminous magma. Chlorites from CBG and GMG are Mg-Fe bearing, while that from AAG is Fe-rich chlorite (chamosite). The CBG and GMG are Mg-rich monzogranites originated from high-K calc-alkaline magma with metaluminous to mildly peraluminous nature. The AAG are Fe-rich monzogranites to syenogranites generated from high-K calc-alkaline peraluminous magma. Both CBG and GMG are late- to post-orogenic granites, while the AAG are post-orogenic granites. All three granite varieties are considered as evolved I-type granites, formed under low to moderate water pressures (～ 0.5-7 kbars) and relatively high ranges of crystallization temperatures (～700-890°C). They were generated from partial melting of crustal materials at lower (CBG >30 km depth) and intermediate (GMG & AAG ～20-30 km depth) levels. The crystal fractionation was the predominant process during differentiation of parent magmas of these granites. Geochemical characteristics manifest that AAG represent the highly fractionated member of magma cycle differs from that produced CBG and GMG. The CBG are relatively enriched in both U and Th existing only within the accessory minerals such as zircon, sphene, and allanite.  相似文献   

Multivariate Mapping of Heavy Metals Spatial Contamination in a Cu–Ni Exploration Field (Botswana) Using Turning Bands Co-simulation Algorithm     

Eze  Peter N.  Madani  Nasser  Adoko  Amoussou Coffi 《Natural Resources Research》2019,28(1):109-124

Natural Resources Research - With a mining-driven economy, Botswana has experienced increased geochemical exploration of minerals around existing mining towns. The mining and smelting of copper and...  相似文献   

A new generation of Primary Care Service Areas or general practice catchment areas          下载免费PDF全文

Soumya Mazumdar  Ludovico Pinzari  Nasser Bagheri  Paul Konings  Federico Girosi  Ian McRae 《Transactions in GIS》2017,21(6):1379-1390

Primary Care is fundamental to a well‐functioning health system. Various geographical small areas including specialized geographies such as Primary Care Service Areas (PCSAs) are used to measure primary care relevant outcomes and services, or to target interventions. PCSAs are small areas, the majority of patients resident in which obtain their primary care services from within the geography. The extent of this self‐sufficiency of use is measured by the Localization Index (LI). PCSAs have been built in the US, Australia and Switzerland using an allocation algorithm, which, while simple and easy to implement, may require the use of various ad‐hoc parameters. In this article we propose an optimization based approach to creating PCSAs, ‐ an approach which has previously been used to generate labour flow regions in Ireland. The approach is data driven, thus requiring a minimal number of ad‐hoc parameters. We compared the resulting PCSAs (or `rPCSAs') with PCSAs generated using the traditional allocation algorithm. We found that rPCSAs were generally larger, offered greater LIs and reflected patient travel patterns better than traditional PCSAs. Accounting for the larger size of rPCSAs showed that rPCSAs offered better LIs than similar sized traditional PCSAs.  相似文献   

Prediction of rainfall using artificial neural networks for synoptic station of Mashhad: a case study     

Najmeh?Khalili  Saeed?Reza?KhodashenasEmail author  Kamran?Davary  Mohammad?Mousavi?Baygi  Fatemeh?Karimaldini 《Arabian Journal of Geosciences》2016,9(13):624

In this paper, we have utilized ANN (artificial neural network) modeling for the prediction of monthly rainfall in Mashhad synoptic station which is located in Iran. To achieve this black-box model, we have used monthly rainfall data from 1953 to 2003 for this synoptic station. First, the Hurst rescaled range statistical (R/S) analysis is used to evaluate the predictability of the collected data. Then, to extract the rainfall dynamic of this station using ANN modeling, a three-layer feed-forward perceptron network with back propagation algorithm is utilized. Using this ANN structure as a black-box model, we have realized the complex dynamics of rainfall through the past information of the system. The approach employs the gradient decent algorithm to train the network. Trying different parameters, two structures, M₅₃₁ and M₇₄₁, have been selected which give the best estimation performance. The performance statistical analysis of the obtained models shows with the best tuning of the developed monthly prediction model the correlation coefficient (R), root mean square error (RMSE), and mean absolute error (MAE) are 0.93, 0.99, and 6.02 mm, respectively, which confirms the effectiveness of the developed models.  相似文献   

Assessment of seasonal characteristics of streamflow droughts under semiarid conditions     

Arash Modaresi Rad  Davar Khalili  Ali Akbar Kamgar-Haghighi  Shahrokh Zand-Parsa  Seyed Adib Banimahd 《Natural Hazards》2016,82(3):1541-1564

  相似文献   

Vertical accuracy evaluation of freely available latest high-resolution (30 m) global digital elevation models over Cameroon (Central Africa) with GPS/leveling ground control points.     

Loudi Yap  Ludovic Houetchak Kandé  Robert Nouayou  Nasser Abdou Ngouh  Marie Brigitte Makuate 《International Journal of Digital Earth》2019,12(5):500-524

Digital Elevation Models (DEMs) contain topographic relief data that are vital for many geoscience applications. This study relies on the vertical accuracy of publicly available latest high-resolution (30?m) global DEMs over Cameroon. These models are (1) the ALOS World 3D-30?m (AW3D30), (2) the Shuttle Radar Topography Mission 1 Arc-Second C-Band Global DEM (SRTM 1) and (3) the Advanced Spaceborne Thermal Emission and Reflection Global DEM Version 2 (ASTER GDEM 2). After matching their coordinate systems and datums, the horizontal positional accuracy evaluation was carried out and it shows that geolocation errors significantly influence the vertical accuracy of global DEMs. After this, the three models are compared among them, in order to access random and systematic effects in the elevation data each of them contains. Further, heights from 555 GPS/leveling points distributed all over Cameroon are compared to each DEM, for their vertical accuracy determination. Traditional and robust statistical measures, normality test, outlier detection and removal were used to describe the vertical quality of the DEMs. The test of the normality rejected the hypothesis of normal distribution for all tested global DEMs. Overall vertical accuracies obtained for the three models after georeferencing and gross error removal in terms of Root Mean Square (RMS) and Normalized Median Absolute Deviation (NMAD) are: AW3D30 (13.06?m and 7.75?m), SRTM 1 (13.25?m and 7.41?m) and ASTER GDEM 2 (18.87?m and 13.30?m). Other accuracy measures (MED, 68.3% quantile, 95% quantile) supply some evidence of the good quality of AW3D30 over Cameroon. Further, the effect of land cover and slope on DEM vertical accuracy was also analyzed. All models have proved to be worse in the areas dominated by forests and shrubs areas. SRTM 1 and AW3D30 are more resilient to the effects of the scattering objects respectively in forests and cultivated areas. The dependency of DEMs accuracy on the terrain roughness is evident. In all slope intervals, AW3D30 is performing better than SRTM 1 and ASTER GDEM 2 over Cameroon. AW3D30 is more representative of the external topography over Cameroon in comparison with two others datasets and SRTM 1 can be a serious alternative to AW3D30 for a range of DEM applications in Cameroon.  相似文献