Search For Correlations Between Batse Gamma-Ray Bursts and Supernovae     

JiřÍ Polcar  Martin Topinka  Graziella Pizzichini  Eliana Palazzi  Nicola Masetti  RenÉ Hudec  Věra HudcovÁ 《Astrophysics and Space Science》2005,296(1-4):485-488

We report on our statistical research of space–time correlated supernovae and CGRO-BATSE gamma-ray bursts (GRBs). There exists a significantly higher abundance of core-collapse supernovae among the correlated supernovae, but the subset of all correlated objects does not seem to be physically different from the whole set.  相似文献   

Iron oxidation state in the Fe‐rich layer and silica matrix of Libyan Desert Glass: A high‐resolution XANES study     

Gabriele Giuli  Eleonora Paris  Giovanni Pratesi  Christian Koeberl  Curzio Cipriani 《Meteoritics & planetary science》2003,38(8):1181-1186

Abstract— Libyan Desert Glass (LDG) is an enigmatic type of glass that occurs in western Egypt in the Libyan Desert. Fairly convincing evidence exists to show that it formed by impact, although the source crater is currently unknown. Some rare samples present dark‐colored streaks with variable amounts of Fe, and they are supposed to contain a meteoritic component. We have studied the iron local environment in an LDG sample by means of Fe K‐edge highresolution X‐ray absorption near edge structure (XANES) spectroscopy to obtain quantitative data on the Fe oxidation state and coordination number in both the Fe‐poor matrix and Fe‐rich layers. The pre‐edge peak of the high‐resolution XANES spectra of the sample studied displays small but reproducible variations between Fe‐poor matrix and Fe‐rich layers, which is indicative of significant changes in the Fe oxidation state and coordination number. Comparison with previously obtained data for a very low‐Fe sample shows that, while iron is virtually all trivalent and in tetrahedral coordination (^[4]Fe³⁺) in the low‐Fe sample, the sample containing the Fe‐rich layers display a mixture of tetra‐coordinated trivalent iron (^[4]Fe³⁺) and penta‐coordinated divalent iron (^[5]Fe²⁺), with the Fe in the Fe‐rich layer being more reduced than the matrix. From these data, we conclude the following: a) the significant differences in the Fe oxidation state between LDG and tektites, together with the wide intra‐sample variations in the Fe‐oxidation state, confirm that LDG is an impact glass and not a tektite‐like glass; b) the higher Fe content, coupled with the more reduced state of the Fe, in the Fe‐rich layers suggests that some or most of the Fe in these layers may be directly derived from the meteoritic projectile and that it is not of terrestrial origin.  相似文献   

Stability at high-pressure,elastic behaviour and pressure-induced structural evolution of CsAlSi<Subscript>5</Subscript>O<Subscript>12</Subscript>, a potential host for nuclear waste     

G. Diego Gatta  Nicola Rotiroti  Martin Fisch  Milen Kadiyski  Thomas Armbruster 《Physics and Chemistry of Minerals》2008,35(9):521-533

The elastic and structural behaviour of the synthetic zeolite CsAlSi₅O₁₂ (a = 16.753(4), b = 13.797(3) and c = 5.0235(17) Å, space group Ama2, Z = 2) were investigated up to 8.5 GPa by in situ single-crystal X-ray diffraction with a diamond anvil cell under hydrostatic conditions. No phase-transition occurs within the P-range investigated. Fitting the volume data with a third-order Birch–Murnaghan equation-of-state gives: V ₀ = 1,155(4) ų, K _T0 = 20(1) GPa and K′ = 6.5(7). The “axial moduli” were calculated with a third-order “linearized” BM-EoS, substituting the cube of the individual lattice parameter (a ³, b ³, c ³) for the volume. The refined axial-EoS parameters are: a ₀ = 16.701(44) Å, K _T0a = 14(2) GPa (β_a = 0.024(3) GPa^?1), K′ _a = 6.2(8) for the a-axis; b ₀ = 13.778(20) Å, K _T0b = 21(3) GPa (β_b = 0.016(2) GPa^?1), K′ _b = 10(2) for the b-axis; c ₀ = 5.018(7) Å, K _T0c = 33(3) GPa (β_c = 0.010(1) GPa^?1), K′ _c = 3.2(8) for the c-axis (K _T0a:K _T0b:K _T0c = 1:1.50:2.36). The HP-crystal structure evolution was studied on the basis of several structural refinements at different pressures: 0.0001 GPa (with crystal in DAC without any pressure medium), 1.58(3), 1.75(4), 1.94(6), 3.25(4), 4.69(5), 7.36(6), 8.45(5) and 0.0001 GPa (after decompression). The main deformation mechanisms at high-pressure are basically driven by tetrahedral tilting, the tetrahedra behaving as rigid-units. A change in the compressional mechanisms was observed at P ≤ 2 GPa. The P-induced structural rearrangement up to 8.5 GPa is completely reversible. The high thermo-elastic stability of CsAlSi₅O_12, the immobility of Cs at HT/HP-conditions, the preservation of crystallinity at least up to 8.5 GPa and 1,000°C in elastic regime and the extremely low leaching rate of Cs from CsAlSi₅O₁₂ allow to consider this open-framework silicate as functional material potentially usable for fixation and deposition of Cs radioisotopes.  相似文献   

Recruitment patterns of Serpula vermicularis L. (Polychaeta, Serpulidae) in Loch Creran, Scotland   总被引：1，自引：0，他引：1  

Nicola D. Chapman  Colin G. Moore  Dan B. Harries  Alastair R. Lyndon 《Estuarine, Coastal and Shelf Science》2007,73(3-4):598-606

This study aimed to contribute to conservation management of reefs of Serpula vermicularis by increasing understanding of the factors influencing larval settlement. The study was carried out in Loch Creran, which supports the most extensive known development of S. vermicularis reefs in the world. Settlement plates were deployed to examine the influence of season, depth, reef density, substrate type and orientation. Monthly deployment of plates revealed settlement of S. vermicularis to occur predominantly from mid-June to mid-October, peaking in late August to early September. Settlement of Pomatoceros spp. peaked much earlier, in late May to early June. Deployment of plates at different depths revealed a marked reduction in S. vermicularis settlement intensity between 6 and 12 m. As this corresponds with the deeper limit of the peripheral fringe of serpulid reefs in the loch, it is suggested that this limit is imposed by a depth-correlated settlement response, rather than reduction in available substrata. Comparisons of various substrata showed a preference by S. vermicularis larvae for a slate over a scallop substrate and no evidence of enhanced recruitment to occupied or unoccupied tubes of S. vermicularis, suggesting that gregarious attraction is unlikely to be a factor causing reef formation. Settlement onto the upper side of a horizontal scallop substrate was found to be insignificant in comparison with the underside or a vertically orientated scallop. Evidence for the role of light in controlling the depth and substrate-orientation preferences of S. vermicularis larvae is discussed. Based on the results of this study, recommendations are made regarding remediation of areas suffering reef damage.  相似文献   

Mercury speciation in surface and deep waters of the Mediterranean Sea     

Jože Kotnik  Milena Horvat  Emmanuel Tessier  Nives Ogrinc  Mathilde Monperrus  David Amouroux  Vesna Fajon  Darija Gibičar  Suzana Žižek  Francesca Sprovieri  Nicola Pirrone 《Marine Chemistry》2007

Mercury speciation and its distribution in surface and deep waters of the Mediterranean Sea were studied during two oceanographic cruises on board the Italian research vessel URANIA in summer 2003 and spring 2004 as part of the Med Oceaneor and MERCYMS projects. The study included deep water profiles of dissolved gaseous Hg (DGM), reactive Hg (RHg), total Hg (THg), monomethyl Hg (MeHg) and dimethyl Hg (DMeHg) in open ocean waters. Average concentrations of measured Hg species were characterized by seasonal and spatial variations. Overall average THg concentrations ranged between 0.41 and 2.65 pM (1.32 ± 0.48 pM) and were comparable to those obtained in previous studies of the Mediterranean Sea. A significant fraction of Hg was present as “reactive” Hg (average 0.33 ± 0.32 pM). Dissolved gaseous Hg (DGM), which consists mainly of Hg⁰, represents a considerable proportion of THg (average 20%, 0.23 ± 0.11 pM). The portion of DGM typically increased towards the bottom, especially in areas with strong tectonic activity (Alboran Sea, Strait of Sicily, Tyrrhenian Sea), indicating its geotectonic origin. No dimethyl Hg was found in surface waters down to the depth of 40 m. Below this depth, its average concentration was 2.67 ± 2.9 fM. Dissolved fractions of total Hg and MeHg were measured in filtered water samples and were 0.68 ± 0.43 pM and 0.29 ± 0.17 pM for THg and MeHg respectively. The fraction of Hg as MeHg was in average 43%, which is relatively high compared to other ocean environments. The concentrations reported in this study are among the lowest found in marine environments and the quality of analytical methods are of key importance. Speciation of Hg in sea water is of crucial importance as THg concentrations alone do not give adequate data for understanding Hg sources and cycling in marine environments. For example, photoinduced transformations are important for the presence of reactive and elemental mercury in the surface layers, biologically mediated reactions are important for the production/degradation of MeHg and DGM in the photic zones of the water column, and the data for DGM in deep sea indicate the natural sources of Hg in geotectonicaly active areas of the Mediterranean Sea.  相似文献   

Heavy metals in marine sediments of Taranto Gulf (Ionian Sea, Southern Italy)   总被引：5，自引：0，他引：5  

Alessandro Buccolieri  Giovanni Buccolieri  Nicola Cardellicchio  Angelo Dell'Atti  Antonella Di Leo  Antonella Maci 《Marine Chemistry》2006,99(1-4):227

Al, Cr, Cu, Fe, Hg, Mn, Ni, Pb, Ti and Zn concentrations have been determined in surface sediment samples collected in the Taranto Gulf (Ionian Sea, Southern Italy) in order to evaluate their levels and spatial distribution in this important area of the Mediterranean Sea. For various metals, the geoaccumulation index has been calculated as a criterion to assess if their concentrations represent contamination levels or can be considered as background levels. The results show that metals concentrations in sediments can be considered near the background levels found in the Mediterranean Sea.Analytical results have been elaborated by using a Geographical Information System (GIS) software to show metals accumulation areas. Using multivariate statistical analysis, we evaluate the possibility to distinguish the sampling stations, in relation to their geographical position. Results have showed metals distribution in the Taranto Gulf is principally influenced by industrial and urban wastes, located mostly in the northern coastal area of the Ionian Sea. Rivers in the Basilicata region and prevailing anticlockwise marine currents are further factors influencing metal accumulation in sediments.  相似文献   

Characterization of the presence and seasonal variation of a CYP1A-like enzyme in digestive gland of the common mussel, Mytilus edulis     

A. Nicola Wootton  P. S. Goldfarb  P. Lemaire  S. C. M. O'Hara  D. R. Livingstone   《Marine environmental research》1996,42(1-4)

  相似文献   

Modeling of the Guagua Pichincha volcano (Ecuador) lahars     

Paolo Canuti  Nicola Casagli  Filippo Catani  Giacomo Falorni 《Physics and Chemistry of the Earth》2002,27(36):1587-1599

Lahars, here defined as debris flows of volcanic origin, are rapid mass movements that pose a serious threat to cities located in the vicinity of many volcanoes. Quito, capital city of Ecuador and placed at the foot of the Pichincha volcano complex, is exposed to serious inundation hazard as part of the city is built on numerous deposits of large lahars that have occurred in the last 10,000 years.The objective of this paper is to model the potential lahars of the Pichincha volcano to predict inundation areas within the city of Quito. For this purpose two models that apply different approaches were utilized and their results were compared.The programs used were LAHARZ, a semi-empirical model conceived by the United States Geological Survey (USGS), and FLO-2D, a hydraulic model distributed by FLO Software Inc. LAHARZ is designed as a rapid, objective and reproducible automated method for mapping areas of potential lahar inundation (Proc. First Int. Conf. on Debris Flow Hazards Mitigation, San Francisco, USA, ASCE, 1998, p. 176). FLO-2D is a two-dimensional flood routing model for simulating overland flow on complex surfaces such as floodplains, alluvial fans or urbanized areas (FLO-2D Users manual, version 99.2). Both models run within geographical information systems (GIS).Fieldwork was focused on collecting all available information involved in lahar modeling. A total of 49 channel cross-sections were measured along the two main streams and stratigraphic investigations were carried out on the fans to estimate the volume of previous events. A global positioning system was utilized to determine the coordinates of each cross-section. Further data collection concerned topography, rainfall characteristics and ashfall thicknesses. All fieldwork was carried out in cooperation with the Instituto Geofisico of the Escuela Politecnica Nacional.Modeling in a GIS environment greatly aided the exportation of results for the creation of thematic maps and facilitated model comparison. Evaluation of the models was performed by comparing simulation results against each other and against the geometry of existing lahar deposits.  相似文献   

Mechanisms of riverbank failure along the Arno River,central Italy     

Stefano Dapporto  Massimo Rinaldi  Nicola Casagli  Pietro Vannocci 《地球表面变化过程与地形》2003,28(12):1303-1323

Riverbanks along the Arno River have been investigated with the aims of de?ning the main mechanisms of failure and retreat, their spatial distribution, and their causes. Geomorphological aspects were investigated by a reconnaissance of riverbank processes, for a number (26) of representative sites. Laboratory and in situ tests were then performed on a selected number of riverbanks (15). Based on the material characteristics, six main typologies of riverbanks have been de?ned, with homogeneous ?ne‐grained and composite banks representing the most frequent types. Slab‐type failures are the most frequent mechanism observed on ?ne‐grained banks, while cantilever failures prevail on composite banks. The role of river stage and related pore water pressure distributions in triggering the main observed mechanisms of failure has been investigated using two different types of stability analysis. The ?rst was conducted for 15 riverbanks, using the limit equilibrium method and considering simpli?ed hypotheses for pore water pressure distribution (annulment of negative pore pressures in the portion of the bank between low water stage and peak stage). Stability conditions and predicted mechanisms of failure are shown to be in reasonably good agreement with ?eld observations. Three riverbanks, representative of the main alluvial reaches of the river, were then selected for a more detailed bank stability analysis, consisting of: (a) de?nition of characteristic hydrographs of the reach with different return periods; (b) modelling of saturated and unsaturated ?ow using ?nite element seepage analysis; and (c) stability analysis with the limit equilibrium method, by adopting pore water pressure values derived from the seepage analysis. The results are compared to those obtained from the previous simpli?ed analysis, and are used to investigate the different responses, in terms of stability, to different hydrological and riverbank conditions. Copyright © 2003 John Wiley & Sons, Ltd.  相似文献   

Mantle peridotites from the Bouvet Triple Junction Region, South Atlantic   总被引：1，自引：0，他引：1  

D. Brunelli  A. Cipriani  L. Ottolini  A. Peyve  E. Bonatti 《地学学报》2003,15(3):194-203

ABSTRACT The Bouvet Triple Junction (BTJ) region in the South Atlantic, where the African, South American and Antarctica plates meet, is affected by several topographic/melting anomalies. Causes of these anomalies were investigated through a study of mantle-derived serpentinized peridotites sampled from three sites in the BTJ region: (1) the Inner Corner High at the intersection of the America Antarctic Ridge (AAR) with the Conrad transform; (2) the south wall of the Bouvet transform (South West Indian Ridge, SWIR); and (3) the eastern Bouvet SWIR Transform Intersection. The degree of melting undergone by these rocks was estimated from relic mineral major- and trace-element composition. Geochemical profiles from residual peridotites and associated basalts show a > 1000-km-wide melting anomaly centred on the Bouvet and Spiess topographic anomalies.  相似文献