STUDY FOR ABNORMAL VARIATIONS OF UNDERGROUND FLUID IN LIJIANG AREA,YUNNAN PROVINCE BEFORE LUDIAN M_S6.5 EARTHQUAKE IN 2014          下载免费PDF全文

YANG Zhu-zhuan  DENG Zhi-hui  YANG Yue-wen  DENG Sheng-chang  LI Qing 《地震地质》2018,40(2):480-498

The study is based on the underground fluid observation data in Lijiang area, northwest Yunnan Province. The data include the water level and temperature in Dangxiao well and Jinjia well, and the ion measurements in Ganze spring. Combining with the data of regional hydrogeology, rainfall, well structures, and the geothermal gradient, we analyzed the variations of each measurement item before the Ludian M_S6.5 earthquake on August 3, 2014 and discussed the possible mechanism for the abnormal variations. The water levels of both Dangxiao well and Jinjia well are influenced by local rainfall, but the former shows hysteresis according to rainy seasons and is the long trend influence; while the latter shows synchronization between high water level and rainy season, indicating good connection between well water and shallow aquifer. The recharge water for Dangxiao well is in relatively low temperature, and the temperature sensor is located at the major connecting section between the well water and the aquifer; the water temperature variation is mainly affected by the discharge status and variation of water level. The Jinjia well is always in static level, and the temperature sensor is below the major connecting section between the well water and aquifer, so the water temperature is affected little by water level variations and in smooth fluctuation. The recharge source for Ganze spring can generally increase the contents of calcium and magnesium ions, so does the conductivity. The water level data of Dangxiao well since 2012 are decomposed with wavelet technique. The results, excluding such high-frequency components as the noise and the semidiurnal and daily wave components influenced by earth tide, are further processed with difference method in order to eliminate the trend effect. The results show that the relative change of water level is enhanced and in relatively rapid increase before the Ludian M_S6.5 earthquake; the corresponding water temperature values are high. The tendency of water level in Jinjia well displays descending, while the corresponding water temperature shows ascending. The content of calcium ion, magnesium ion, bicarbonate ion, and conductivity of Ganze spring are descending, while the content of fluoride ion is ascending. The abnormal variations of underground fluid in Lijiang area appeared in turns and were accompanied with minor earthquakes before Ludian M_S6.5 earthquake, which indicates enhancing of regional stress and increasing of fluid activity.  相似文献   

2013-2016年乳山震群b值深度变化特征及意义     

申金超  徐波  张斌  苏道磊  刘晨 《地震地磁观测与研究》2018,39(2):25-32

利用双差定位方法,对2013年10月—2016年12月乳山震群进行重定位,并计算乳山震群中地震集中活动区域b值,分析其深度分布变化。结果显示：地震重定位后表现为近NW向集中分布;b值在震源深度7.4 km上下最小,反映该深度处应力最强;乳山震群b值并不随震源深度增大而呈系统性减小变化,且深度10.2 km以下无有效b值,进一步证实该震群近NW向发震断裂的存在。根据b值随深度的变化特征,推测断裂活动的高应力区域集中在6.5—10.2 km深度范围内,断裂活动在深度7.4 km处应力最强,且水平分布最广;相比上下两侧地壳介质b值在5.5—6.2 km深度层位明显增大,反映该深度层位介质性质存在明显差异。  相似文献   

Multi-objective optimal design for flood risk management with resilience objectives   总被引：1，自引：1，他引：0  

Hsin-Ting?Su  Sai?Hung?CheungEmail author  Edmond?Yat-Man?Lo 《Stochastic Environmental Research and Risk Assessment (SERRA)》2018,32(4):1147-1162

In flood risk management, the divergent concept of resilience of a flood defense system cannot be fully defined quantitatively by one indicator and multiple indicators need to be considered simultaneously. In this paper, a multi-objective optimization (MOO) design framework is developed to determine the optimal protection level of a levee system based on different resilience indicators that depend on the probabilistic features of the flood damage cost arising under the uncertain nature of rainfalls. An evolutionary-based MOO algorithm is used to find a set of non-dominated solutions, known as Pareto optimal solutions for the optimal protection level. The objective functions, specifically resilience indicators of severity, variability and graduality, that account for the uncertainty of rainfall can be evaluated by stochastic sampling of rainfall amount together with the model simulations of incurred flood damage estimation for the levee system. However, these model simulations which usually require detailed flood inundation simulation are computationally demanding. This hinders the wide application of MOO in flood risk management and is circumvented here via a surrogate flood damage modeling technique that is integrated into the MOO algorithm. The proposed optimal design framework is applied to a levee system in a central basin of flood-prone Jakarta, Indonesia. The results suggest that the proposed framework enables the application of MOO with resilience objectives for flood defense system design under uncertainty and solves the decision making problems efficiently by drastically reducing the required computational time.  相似文献   

Modeling lateral circulation and its influence on the along-channel flow in a branched estuary     

Lei Zhu  Qing He  Jian Shen 《Ocean Dynamics》2018,68(2):177-191

A numerical modeling study of the influence of the lateral flow on the estuarine exchange flow was conducted in the north passage of the Changjiang estuary. The lateral flows show substantial variabilities within a flood-ebb tidal cycle. The strong lateral flow occurring during flood tide is caused primarily by the unique cross-shoal flow that induces a strong northward (looking upstream) barotropic force near the surface and advects saltier water toward the northern part of the channel, resulting in a southward baroclinic force caused by the lateral density gradient. Thus, a two-layer structure of lateral flows is produced during the flood tide. The lateral flows are vigorous near the flood slack and the magnitude can exceed that of the along-channel tidal flow during that period. The strong vertical shear of the lateral flows and the salinity gradient in lateral direction generate lateral tidal straining, which are out of phase with the along-channel tidal straining. Consequently, stratification is enhanced at the early stage of the ebb tide. In contrast, strong along-channel straining is apparent during the late ebb tide. The vertical mixing disrupts the vertical density gradient, thus suppressing stratification. The impact of lateral straining on stratification during spring tide is more pronounced than that of along-channel straining during late flood and early ebb tides. The momentum balance along the estuary suggests that lateral flow can augment the residual exchange flow. The advection of lateral flows brings low-energy water from the shoal to the deep channel during the flood tide, whereas the energetic water is moved to the shoal via lateral advection during the ebb tide. The impact of lateral flow on estuarine circulation of this multiple-channel estuary is different from single-channel estuary. A model simulation by blocking the cross-shoal flow shows that the magnitudes of lateral flows and tidal straining are reduced. Moreover, the reduced lateral tidal straining results in a decrease in vertical stratification from the late flood to early ebb tides during the spring tide. By contrast, the along-channel tidal straining becomes dominant. The model results illustrate the important dynamic linkage between lateral flows and estuarine dynamics in the Changjiang estuary.  相似文献   

Oceanic plate subduction history in the western Pacific Ocean: Constraint from late Mesozoic evolution of the Tan-Lu Fault Zone   总被引：4，自引：0，他引：4  

Guang Zhu  Cheng Liu  Chengchuan Gu  Shuai Zhang  Yunjian Li  Nan Su  Shiye Xiao 《中国科学:地球科学(英文版)》2018,61(4):386-405

The NE- to NNE-striking Tan-Lu Fault Zone (TLFZ) is the largest fault zone in East China, and a typical representative for the circum-Pacific tectonics. Its late Mesozoic evolution resulted from subduction of the Paleo-Pacific Plate, and can be used for indication to the subduction history. The TLFZ reactivated at the end of Middle Jurassic since its origination in Middle Triassic. This phase of sinistral motion can only be recognized along the eastern edge of the Dabie-Sulu orogenis, and indicates initiation of the Paleo-Pacific (Izanagi) Plate subduction beneath the East China continent. After the Late Jurassic standstill, the fault zone experienced intense sinistral faulting again at the beginning of Early Cretaceous under N-S compression that resulted from the NNW-ward, low-angle, high-speed subduction of the Izanagi Plate. It turned into normal faulting in the rest of Early Cretaceous, which was simultaneous with the peak destruction of the North China Craton caused by backarc extension that resulted from rollback of the subducting Izanagi Plate. The TLFZ was subjected to sinistral, transpressive displacement again at the end of Early Cretaceous. This shortening event led to termination of the North China Craton destruction. The fault zone suffered local normal faulting in Late Cretaceous due to the far-field, weak backarc extension. The late Mesozoic evolution of the TLFZ show repeated alternation between the transpressive strike-slip motion and normal faulting. Each of the sinistral faulting event took place in a relatively short period whereas every normal faulting event lasted in a longer period, which are related to the subduction way and history of the Paleo-Pacific Plates.  相似文献   

An acoustic-wave theory for casing bond evaluation using viscoelastic slip boundary modeling     

Xiaoming Tang  Can Jiang  Yuanda Su  Xuelian Chen 《中国科学:地球科学(英文版)》2018,61(8):1057-1064

Slip boundary condition is commonly utilized to model elastic wave propagation through layered earth media. The same approach is used here to characterize acoustic wave propagation along a cased borehole with various cement bond conditions. By modeling the cement layer between casing and formation as a viscoelastic slip interface with complex coupling rigidity parameters, one can not only reduce the complexity in the classical elastic wave modeling of the problem, but also efficiently model various complicated wave phenomena that are difficult for the existing modeling. More specifically, the new theory can well describe the effect of the cement bond condition change and the location of the change (i.e., whether it is in the first interface between casing and cement, or the second interface between cement and formation) on the acoustic waves, demonstrating the good modeling capability and predicting power. Application of the theory to field data shows that the theory can correctly model the acoustic wave characteristics and interpret the cement bond condition, thus providing a useful fundament theory for casing bond evaluation using acoustic logging.  相似文献   

走滑断层地震地表破裂带分布影响因素数值模拟研究——以1973年炉霍M_S7.6地震为例          下载免费PDF全文

李红  邓志辉  陈连旺  周庆  冉洪流  邢成起 《地球物理学报》2019,62(8):2871-2884

地震后在断层两侧的强变形与破裂带是地震灾害最严重的区域.为系统、定量研究同震地表变形带特征及其影响因素,本研究建立了走滑断层的三维有限元模型,分别探讨了断层位错量、断层倾角、错动方式、上覆松散层厚度、沉积层土性等因素的影响规律.模拟结果显示：走滑断层同震地表变形表现为以断层为中心的近似对称单峰分布,强地表变形集中在断层两侧各50 m宽度范围,地表变形量峰值随位错量增加而增大,破裂带宽度也随位错量增加而增大,但增量逐渐减小,并趋于一个渐近值;断层倾角对地表变形与破裂带宽度影响表现为随倾角减小变形量峰值点向上盘小距离偏移;走滑兼正断位错引起的变形量峰值最大,但地表破裂带宽度最小,走滑兼逆断引起的变形量峰值最小,但地表破裂带宽度最大,直立纯走滑断层的两参量都居中;走滑断层地表变形量峰值随上覆松散层厚度增大而减小,但随厚度减小的速率逐渐变小,松散层厚度从5 m增加到20 m时,破裂带宽度随厚度增加而缓慢增加,但自厚度大于20 m时,破裂带宽度开始随厚度增加而逐渐下降;当不同土性覆盖层（粗砂、粉砂、黏土）厚度相同时,地震引起的地表变形量峰值自粗砂、粉砂、黏土逐次增大,当粗砂厚度为60 m以上时,3.6 m的同震水平位错已不能形成地表破裂,而粉砂的厚度为70 m以上,黏土的厚度则为75 m以上.  相似文献   

遥感数据产品真实性检验不确定性分析研究进展   总被引：1，自引：1，他引：1  

吴小丹  肖青  闻建光  刘强  彭菁菁  李小文 《遥感学报》2014,18(5):1011-1023

不确定性分析是遥感产品真实性检验最重要的部分,本文以叶面积指数LAI为例,从测量、模型以及蕴含在测量和模型中的尺度效应3个方面分析产品真实性检验过程的不确定性来源,并针对问题提出减小其不确定性的办法。对于相对均一的地表,地面测量的空间代表性比较好,可不考虑地表空间代表性引起的尺度效应和蕴含在模型中的尺度效应引起的不确定性。针对异质性地表,分为两种情况:若模型是线性的,蕴含在模型中的尺度效应可以忽略,只需要考虑测量的不确定性、模型本身的不确定性、以及地面测量的空间代表性引起的尺度效应;若模型是非线性的,则测量、模型和蕴含在测量和模型中的尺度效应引起的不确定性都需要考虑。  相似文献   

单频机载激光测深海陆回波自动分类方法EI北大核心CSCD     

王丹菂  邢帅  徐青  林雨准  李鹏程 《测绘学报》2022,51(5):750-761

海陆回波分类是机载激光测深中的一项波形预处理步骤,关系着后续信号检测和点云生成的精度。针对现有海陆回波分类方法不适用于单频机载激光测深系统且自动化程度不高的问题,本文提出一种单频机载激光测深海陆回波自动分类方法:首先,通过首末回波信号检测及点位计算获得回波的点云高程特征;然后,采用高程直方图拟合的方式确定平均水面位置,依据点云高程特征判定大部分回波的海陆属性,对余下的未定回波,仅保留其中的最强信号并统一处理为单信号回波,同时提取波形的信号特征和能量分布特征,依据点云高程特征的相似性自动建立训练样本集;最后,利用支持向量机分类器实现未定回波的分类。采用国产系统Mapper5000采集的实测数据进行试验,结果表明基于首末回波点云的初分类可快速、准确地对远离海陆交界处的回波进行分类,基于波形特征的未定回波分类可在自动建立的训练样本集支持下实现海陆交界处未定回波的高精度分类。与传统方法相比,本文方法无须近红外通道波形和人工样本的辅助就可以达到较高的分类精度,其中总体分类精度可达99.82%,海陆交界处分类精度可达91.59%。  相似文献   

An improved segmentation approach for planar surfaces from unstructured 3D point clouds     

Tarek M.  Awwad  Qing  Zhu  Zhiqiang  Du  Yeting  Zhang 《The Photogrammetric Record》2010,25(129):5-23

The extraction of object features from massive unstructured point clouds with different local densities, especially in the presence of random noisy points, is not a trivial task even if that feature is a planar surface. Segmentation is the most important step in the feature extraction process. In practice, most segmentation approaches use geometrical information to segment the 3D point cloud. The features generally include the position of each point (X, Y and Z), locally estimated surface normals and residuals of best fitting surfaces; however, these features could be affected by noisy points and in consequence directly affect the segmentation results. Therefore, massive unstructured and noisy point clouds also lead to bad segmentation (over-segmentation, under-segmentation or no segmentation). While the RANSAC (random sample consensus) algorithm is effective in the presence of noise and outliers, it has two significant disadvantages, namely, its efficiency and the fact that the plane detected by RANSAC may not necessarily belong to the same object surface; that is, spurious surfaces may appear, especially in the case of parallel-gradual planar surfaces such as stairs. The innovative idea proposed in this paper is a modification for the RANSAC algorithm called Seq-NV-RANSAC. This algorithm checks the normal vector (NV) between the existing point clouds and the hypothesised RANSAC plane, which is created by three random points, under an intuitive threshold value. After extracting the first plane, this process is repeated sequentially (Seq) and automatically, until no planar surfaces can be extracted from the remaining points under the existing threshold value. This prevents the extraction of spurious surfaces, brings an improvement in quality to the computed attributes and increases the degree of automation of surface extraction. Thus the best fit is achieved for the real existing surfaces.  相似文献