Fracture-zone conditions on a recently active fault: insights from mineralogical and geochemical analyses of the Hirabayashi NIED drill core on the Nojima fault, southwest Japan, which ruptured in the 1995 Kobe earthquake     

Tatsuo Matsuda  Kentaro Omura  Ryuji Ikeda  Takashi Arai  Kenta Kobayashi  Koji Shimada  Hidemi Tanaka  Tomoaki Tomita  Satoshi Hirano   《Tectonophysics》2004,378(3-4):143

An 1800-m-deep borehole into the Nojima fault zone was drilled at Nojima-Hirabayashi, Japan, after the 1995 Hyogo-ken Nanbu (Kobe) earthquake. Three possible fracture zones were detected at depths of about 1140, 1300, and 1800 m. To assess these fracture zones in this recently active fault, we analyzed the distributions of fault rocks, minerals, and chemical elements in these zones. The central fault plane in the shallowest fracture zone was identified by foliated blue-gray gouge at a depth of 1140 m. The degree of fracturing was evidently greater in the hanging wall than in the footwall. Minerals detected in this zone were quartz, orthoclase, plagioclase, and biotite, as in the parent rock (granodiorite), and also kaolinite, smectite, laumontite, stilbite, calcite, ankerite, and siderite, which are related to hydrothermal alteration. Biotite was absent in both the hanging wall and footwall across the central fault plane, but it was absent over a greater distance from the central fault plane in the hanging wall than in the footwall. Major element compositions across this zone suggested that hydrothermal alteration minerals such as kaolinite and smectite occurred across the central fault plane for a greater distance in the hanging wall than in the footwall. Similarly, H₂O+ and CO₂ had higher concentrations in the hanging wall than in the footwall. This asymmetrical distribution pattern is probably due to the greater degree of wall–rock fracturing and associated alteration in the hanging wall. We attributed the characteristics of this zone to fault activity and fluid–rock interactions. We analyzed the other fracture zones along this fault in the same way. In the fracture zone at about 1300 m depth, we detected the same kinds of hydrothermal alteration minerals as in the shallower zone, but they were in fewer samples. We detected relatively little H₂O+ and CO₂, and little evidence for movement of the major chemical elements, indicating little past fluid–rock interaction. In the fracture zone at about 1800 m depth, H₂O+ and CO₂ were very enriched throughout the interval, as in the fracture zone at about 1140 m depth. However, smectite was absent and chlorite was present, indicating the occurrence of chloritization, which requires a temperature of more than 200 °C. Only smectite can form under the present conditions in these fracture zones. The chloritization probably occurred in the past when the fracture zone was deeper than it is now. These observations suggest that among the three fracture zones, that at about 1140 m depth was the most activated at the time of the 1995 Hyogo-ken Nanbu (Kobe) earthquake.  相似文献   

Late Cretaceous palaeomagnetic results from Sikhote Alin, far eastern Russia: tectonic implications for the eastern margin of the Mongolia Block   总被引：3，自引：0，他引：3  

Yo-ichiro Otofuji  Takaaki Matsuda  Ryo Enami  Koji Uno  Katsuhiko Nishihama  Nadir Halim  Li Su  Haider Zaman  Ruslan G. Kulinich  Petr S. Zimin  Anatoly P. Matunin  Vladimir G. Sakhno 《Geophysical Journal International》2003,152(1):202-214

  相似文献   

Ar/Ar Single Grain Dating and Mineral Chemistry of Hornblendes South of the Red River Shear Zone (Vietnam): New Evidence for Early Proterozoic Tectonothermal Event     

Tran Ngoc Nam  Hironobu Hyodo  Tetsumaru Itaya  Takaaki Matsuda 《Gondwana Research》2002,5(4):801-811

The pre-Mesozoic metamorphic belt runs parallel to the Day Nui Con Voi - Red River shear zone in Vietnam to the south. The belt is mainly composed of hornblende gneisses, amphibolite lenses and mica-schists. Five hornblendes from a gneiss and an amphibolite were analyzed chemically and chronologically by Electron Probe Micro Analysis (EPMA) and ⁴⁰Ar/³⁹Ar methods. EPMA analyses show that hornblendes in the gneiss and the amphibolite have significant amount of edenite component and similar average composition. However, the recalculated Fe³⁺ content is significantly heterogeneous in a thin section while total Fe is nearly the same among the analyses. The rim of each crystal is higher in Fe³⁺/(Fe³⁺ + Fe²⁺) than the core. These chemical and petrological features suggest that the hornblendes have suffered significant oxidation, in particular, largely in the gneiss.

⁴⁰Ar/³⁹Ar analyses showed that the gneiss has a significant variation of plateau ages (2089±14, 1977±19 and 1873±13 Ma) among three hornblende grains, whereas the amphibolite gives the same plateau ages (2056±14 and 2044±21 Ma) for two grains. All grains of both samples have excess ages in the first few fractions at low temperatures and partial-loss ages between the excess and plateau spectra. The Ca/K ratios indicate some disturbed phases for the lower temperature spectra but the partial-loss ages are also derived from hornblende phase. These facts suggest that hornblende in the gneiss has experienced partial argon loss by oxidation and/or thermally activated argon diffusion process. However, the gneiss and the associated amphibolite have preserved the early Proterozoic tectono-metamorphic event in the hornblende crystals except for their rims, giving new evidence for the early Proterozoic event within the pre-Mesozoic metamorphic belt (northern Vietnam) south of the Red River shear zone in Indochina.  相似文献   

Ar and Sr isotopes of mantle-derived rocks from the Japanese Islands     

I. Kaneoka  J. Matsuda  S. Zashu  E. Takahashi  K. Aoki 《Bulletin of Volcanology》1978,41(4):424-433

⁴⁰Ar-³⁰Ar and Sr isotope analyses have been made for ultramatic nodules in basaltic rocks from Itinome-gata and the Oki-Dōgo Island, northeast and southwest of Japan respectively, in order to examine the state of the upper mantle under the Japanese Islands. ⁴⁰Ar-³⁰Ar analyses have revealed that ultramafic nodules from Oki-Dōgo Island were involved in events which caused Ar redistribution in these rocks and probably were related to their formation not older than several tens of millions of years ago. These nodules are relatively depleted in both Rb and Sr contents together with some other incompatible elements compared to similar nodules from the other regions in the world. This may be typical for ultramafic nodules from the Japanese Islands. Ultramafic nodules show mostly a little higher⁸⁷Sr/⁸⁶Sr ratios (0.704–0.706) than those of host basaltic rocks (0.703–0.705) indicating the accidental origin for these nodules. Present results also suggest both horizontal and vertical inhomogeneities of the uppermost part of the mantle with respect to Sr isotopes on a regional scale. Hence, the ultramafic nodules in volcanic rocks may not always directly represent the upper mantle materials from which the magma is produced at present. Such ultramafic nodules might be relatively old material from the uppermost part of the mantle under the Japanese Islands.  相似文献   

Isotopic anomalies of noble gases in meteorites and their origins—VI. Presolar components in the Murchison C2 chondrite     

Leo Alaerts  Roy S. Lewis  Jun-ichi Matsuda  Edward Anders 《Geochimica et cosmochimica acta》1980,44(2):189-209

  相似文献   

Elemental abundances in chondrules from unequilibrated chondrites: Evidence for chondrule origin by melting of pre-existing materials     

James L. Gooding  Klaus Keil  Takaaki Fukuoka  Roman A. Schmitt 《Earth and Planetary Science Letters》1980,50(1):171-180

Bulk abundances of Na, Mg, Al, Ca, Sc, V, Cr, Mn, Fe, Co, Ni, Zn, La, Sm, Eu, Yb, Lu, Ir, and Au were determined by neutron activation analysis of chondrules separated from unequilibrated H-, L-, and LL-chondrites (Tieschitz, Hallingeberg, Chainpur, Semarkona) and correlated with chondrule petrographic properties. Despite wellknown compositional differences among the whole-rock chondrites, the geometric mean compositions of their respective chondrule suites are nearly indistinguishable from each other for many elements. Relative to the condensible bulk solar system (approximated by the Cl chondrite Orgueil), chondrules are enriched in lithophile and depleted in siderophile elements in a pattern consistent with chondrule formation by melting of pre-existing materials, preceded or attended by silicate/metal fractionation. Relative to nonporphyritic chondrules, porphyritic chondrules are enriched in refractory and siderophile elements, suggesting that these two chondrule groups may have formed from different precursor materials.  相似文献   

Selective detection of Fe and Mn species at mineral surfaces in weathered granite by conversion electron yield X-ray absorption fine structure     

Takaaki Itai  Yoshio Takahashi  Tomoya Uruga  Hajime Tanida  Atsuo Iida 《Applied Geochemistry》2008

A new method for the speciation of Fe and Mn at mineral surfaces is proposed using X-ray absorption fine structure in conversion electron yield mode (CEY-XAFS). This method generally reflects information on the species at the sub-μm scale from the particle surface due to the limited escape depth of the inelastic Auger electron. The surface sensitivity of this method was assessed by experiments on two samples of granite showing different degrees of weathering. The XANES spectra of the Fe-K and Mn-K edge clearly gave different information for CEY and fluorescence (FL) modes. These XANES spectra of Fe and Mn show a good fit upon application of least-squares fitting using ferrihydrite/MnO₂ and biotite as the end members. The XANES spectra collected by CEY mode provided more selective information on the secondary phases which are probably present at the mineral surfaces. In particular, CEY-XANES spectra of Mn indicated the presence of Mn oxide in unweathered granite despite a very small contribution of Mn oxide being indicated by FL-XANES and selective chemical-extraction analyses. Manganese oxide could not be detected by micro-beam XANES (beam size: 5 × 5 μm²) in unweathered granite, suggesting that Mn oxide thinly and ubiquitously coats mineral surface at a sub-μm scale. This information is important, since Mn oxide can be the host for various trace elements. CEY-XAFS can prove to be a powerful tool as a highly sensitive surface speciation method. Combination of CEY and FL-XAFS will help identify minor phases that form at mineral surfaces, but identification of Fe and Mn oxides at mineral surfaces is critical to understand the migration of trace elements in water-rock interaction.  相似文献   

Arsenic release from biotite into a Holocene groundwater aquifer in Bangladesh   总被引：1，自引：0，他引：1  

Ashraf Ali Seddique  Harue Masuda  Muneki Mitamura  Keiji Shinoda  Toshiro Yamanaka  Takaaki Itai  Teruyuki Maruoka  Kenji Uesugi  Kazi Matin Ahmed  Dipak Kumar Biswas 《Applied Geochemistry》2008,23(8):2236-2248

Continuous core sediments (to a depth of 90.1 m) taken at a transitional area of Holocene and Pleistocene deposits in Sonargaon, Bangladesh were characterized for their mineralogy and chemistry. Among the sediments of the lower part of the Holocene aquifer (depth: 18–29 m), where most domestic wells are installed, As is mostly fixed in biotite and organic phases. A positive correlation of As concentration with those of Al and Fe but not that of total organic C clearly suggests that biotite is a primary source of As. Although microbial reduction–dissolution of As-containing Fe oxyhydroxides is thought to cause As-enriched groundwater in the Ganges–Brahmaputra–Meghna delta plain, the authors conclude that chemical weathering of biotite is the primary formation mechanism and prevailing reducing conditions contribute to the expansion of As-enriched groundwater in the study area.  相似文献   

Japan’s <Emphasis Type="Italic">Jishu-bosai-soshiki</Emphasis> community activities: analysis of its role in participatory community disaster risk management     

Robert Bajek  Yoko Matsuda  Norio Okada 《Natural Hazards》2008,44(2):281-292

Jishu-bosai-soshiki, or Jishubo for short, with a literal meaning of “autonomous organization for disaster reduction”, is a neighborhood association for disaster preparedness and rescue activity. In this paper, the role of Jishubo in the context of participatory disaster management in Japan is discussed. Although the formation of Jishubo is not legally mandated, local governments exercise a great deal of persuasion on the inhabitants of their community to organize and participate in disaster management activities. Therefore, participants in Jishubo activities tend to be guided and mobilized with a soft touch by local governments rather than being truly self-motivated, with the objective of reducing disaster risks in their residential areas. There have been several studies on community participatory management conducted in a number of countries, including New Zealand, the USA and Europe, which will serve as a reference in our study. However interesting, the cultural comparison of the “Western” and “Japanese” approaches to community disaster management, is beyond the scope of this paper, the aim of which is to determine a case of community disaster management in Japan. This paper addresses the background behind the development of Jishubo and discusses the uniqueness and limits of this softly mobilized participatory movement in Japan. Based on a case study in Kishiwada City, Osaka, the motivations driving people to participate in disaster management activities organized for Jishubo members is examined. In conclusion, we derive some policy implications and suggest possible approaches for improving the effectiveness of Jishubo and increasing the motivation of people to participate. We also propose that the roles of administrative bodies in Japan, such as non-profit organizations, be better incorporated into community’s participatory disaster reduction activities.  相似文献   

Full-scale dynamic testing of response-controlled buildings and their components:concepts,methods,and findings     

Kazuhiko Kasai  Kazuhiro Matsuda 《地震工程与工程振动(英文版)》2014,(Z1)

A series of shake-table tests was conducted by inserting and replacing 4 different types of dampers,or by removing them in a full-scale 5-story steel frame building. The objective is to validate response-control technologies that are increasingly adopted for major Japanese buildings without being attested to-date by a major earthquake. Test results are briefly described,and good performance of the dampers and frame demonstrated. The concepts of the full-scale building tests and various contributions are discussed. The difficulty associated with full-scale dynamic testing is explained.  相似文献