A new, automatic hydrothermal fluid sampler using a shape-memory alloy   总被引：2，自引：0，他引：2  

Takeshi Naganuma  Masanori Kyo  Tatsuhiko Ueki  Kazuhiko Takeda  Jun-ichiro Ishibashi 《Journal of Oceanography》1998,54(3):241-246

A new hydrothermal fluid sampler has been developed to provide more maneuverability in underwater operation. The sampler characteristically employs a shape-memory alloy, which senses high temperature and actuates the suction mechanism. A shape-memory alloy is also used to switch the intake valve of the sampler, the intention being to avoid missampling when the inlet is in low temperature water. Prototype samplers were designed to collect the fluids hotter than 80°C. Test sampling was performed at hydrothermal vents (1372–1374 m deep) in the submarine volcano, Suiyo Seamount, Izu-Bonin Arc, northwestern Pacific. Observed fluid temperature was between 138 and 298°C, while the ambient seawater temperature was 3.1°C. Each prototype collected about 100 ml fluid as designed. The magnesium concentration in the samples indicated a seawater content of 47.5–90.8%, which indicates the entrainment of ambient seawater. Microscopic observatinn revealed the occurrence of microorganisms in the sample fluids at a population density of 10⁵ to 10⁶ cells ml⁻¹, which is 2–3 orders of magnitude higher than those in seawater at that depth. The use of the newly developed fluid sampler will greatly facilitate the collection of vent-associated microorganisms, which are of potential biological and biotechnological interest.  相似文献   

A Continuous and Mechanistic Representation of Calcite Reaction-Controlled Kinetics in Dilute Solutions at 25°C and 1 Atm Total Pressure     

Takeshi Arakaki  Alfonso Mucci 《Aquatic Geochemistry》1999,5(2):225-225

  相似文献   

Metamorphic condition of a regional metamorphic complex in the Omuta district in northern Kyushu,southwest Japan          下载免费PDF全文

Takeshi Ikeda  Kazuhiro Miyazaki  Hirohisa Matsuura 《Island Arc》2017,26(5)

A high‐temperature (T) metamorphic complex occurs in the Omuta district, northern Kyushu, Japan. Three metamorphic zones are defined based on pelitic mineral assemblage, i.e. chlorite–biotite zone, muscovite–andalusite zone and sillimanite–K‐feldspar zone with ascending metamorphic grade from north to south. Two isograds trend approximately east–west, which is oblique to the boundary between the metamorphic complex and the Tamana Granodiorite located on the southeast. The metamorphic condition of two pelitic rocks that occur in the muscovite–andalusite zone and sillimanite–K‐feldspar zone are estimated as 510 ±30 °C, 300 ±60 MPa and 720 ±30 °C, 620 ±60 MPa, respectively. Thermodynamic consideration reveals that use of the same geothermobarometer enables precise determination of the difference in pressure between the samples as 320 ±10 MPa. This indicates that the pelitic samples were metamorphosed at different depth by 11–12 km that is significantly larger than the geographic distance of 6.8 km between the sample localities. This also suggests that crustal thinning took place after the high‐T metamorphism. The high‐T metamorphic complex is, therefore, not of static contact metamorphism but of dynamic regional metamorphism. The present result combined with petrological and chronological similarities implies that this complex suffered the regional Ryoke metamorphism.  相似文献   

Dynamic loading tests and seismic response analysis of a stud-type damper composed of multiple friction units with disc springs     

Takeshi Sano  Kazutaka Shirai  Yasumasa Suzui  Yoshikazu Utsumi 《地震工程与结构动力学》2020,49(13):1259-1280

This paper presents an experimental study on the performance of a shear-sliding stud-type damper composed of multiple friction units with high-tension bolts and disc springs. A numerical evaluation of the response reduction effects achieved by the stud-type damper is also presented. In dynamic loading tests, the behavior of stud-type multiunit friction damper specimens was investigated. Three different full-scale damper specimens, which were composed of five, six, or seven friction units with two or four sliding surfaces, were incorporated into loading devices for testing. The stud-type friction dampers demonstrated stable rigid-plastic hysteresis loops without any remarkable decrease in the sliding force even when subjected to repetitive loading, in addition to showing no unstable behavior such as lateral buckling. The damper produced a total sliding force approximately proportional to the number of sliding surfaces and friction units. The total sliding force of the stud-type damper can thus be estimated by summing the contributions of each friction unit. In an earthquake response simulation, the control effects achieved by stud-type dampers incorporated into an analytical high-rise building model under various input waves, including long-period, long-duration and pulse-like ground motions, were evaluated. A satisfactory response reduction was obtained by installing the developed stud-type dampers into the main frame without negatively impacting usability and convenience in terms of building planning.  相似文献   

An ethnoarchaeological study of chemical residues in the floors and soils of Q'eqchi' Maya houses at Las Pozas,Guatemala     

Fabin G. Fernndez  Richard E. Terry  Takeshi Inomata  Markus Eberl 《Geoarchaeology》2002,17(6):487-519

This ethnoarchaeological study at the Q'eqchi' Maya village of Las Pozas, Guatemala, aimed to refine the understanding of the relationship between soil chemical signatures and human activities for archaeological applications. The research involved phosphorus, exchangeable ion (calcium, potassium, magnesium, sodium), and trace element analysis of soils and earth floors extracted by Mehlich II, ammonium acetate, and DTPA chelate solutions, respectively. The results showed high levels of phosphorus, potassium, magnesium, and pH in food preparation areas, as well as high phosphorus concentrations and low pH in food consumption areas. The traffic areas exhibited low phosphorus and trace element contents, whereas refuse disposal areas were enriched. These results provide important information for the understanding of space use in ancient settlements. © 2002 Wiley Periodicals, Inc.  相似文献   

Variations in snowmelt energy and energy balance characteristics with larch forest density on Mt Iwate,Japan: observations and energy balance analyses     

Kazuyoshi Suzuki  Takeshi Ohta  Atsushi Kojima  Tetsu Hashimoto 《水文研究》1999,13(17):2675-2688

The variation in snowmelt energy and energy components were evaluated with respect to forest density. Surface snowmelt rates, surface evaporation from snow cover and meteorological elements were measured in the open and under sparse (411 trees/ha) and dense (1433 trees/ha) larch canopies. The surface snowmelt rate decreased as the forest density increased. Based on the observations and energy balance analyses, we concluded the following. (1) Albedo decreased while the bulk coefficient for latent heat increased with forest density. (2) The duration of snowmelt increased with forest density because the energy for nocturnal cooling of the snow cover decreased. (3) When comparing the open and forested sites, the changes in snowmelt energy with forest density were caused by sensible heat flux. However, the contribution of net radiation was highest in the forested sites. Therefore, the effects of forest cover on the snowmelt energy were different when comparing both the open and forested sites and the sparse and densely forested sites. (4) The ratio of net radiation to snowmelt energy increased with forest density; although both snowmelt energy and net radiation decreased with increased forest density, the snowmelt energy decreased more rapidly. Sensible heat also decreased as forest density increased. Both albedo and downward long‐wave radiation influenced net radiation. Copyright © 1999 John Wiley & Sons, Ltd.  相似文献   

Recovery of groundwater in the Sanriku region contaminated by the tsunami inundation from the 2011 Tohoku earthquake     

Ichirow Kaihotsu  Shin-ichi Onodera  Jun Shimada  Kei Nakagawa 《Environmental Earth Sciences》2017,76(6):250

Many wells in the Sanriku region used as sources for water supply systems were heavily contaminated by the tsunami of the 2011 great Tohoku earthquake on March 11 in 2011. To better understand the nature of the groundwater contamination by the tsunami inundation and to clarify the recovery process of contaminated groundwater at the study wells, groundwater monitoring has been conducted once or twice yearly since early summer in 2011. High and abnormal values of electric conductivity (EC), chloride ion concentration (CIC), Na⁺, Ca⁺, heavy metal ions, and heavier isotopes of the contaminated groundwater were also obtained in April and June 2011. The chemical elements have rapidly and exponentially decreased as a result of effective pumping of the contaminated groundwater from the study wells and because of abundant rainfall in 2011. In April 2015 (about 4 years after the tsunami inundation), the CIC and EC of the contaminated groundwater of two study wells in Minamisanriku town had reached pre-inundation values. The estimated residence times of groundwater of the two study wells were 105–118 days in the full-day pumping stage and 910–1000 days in the daytime-only pumping stage.  相似文献   

Collapse behavior of a brick masonry house using a shaking table and numerical simulation based on the extended distinct element method   总被引：1，自引：1，他引：0  

T. Nakagawa  T. Narafu  H. Imai  T. Hanazato  Q. Ali  C. Minowa 《Bulletin of Earthquake Engineering》2012,10(1):269-283

Damage caused by devastating earthquakes has occurred in many developing countries. In order to mitigate such damage by promoting the study of adequate seismic design strategies, the authors conducted a dynamic collapse test on 3 m × 3 m × 3 m brick masonry house constructed with Pakistani bricks, using a one-direction horizontal large-scale shaking table. In order to analyze and simulate seismic performance of the masonry structures, the authors applied a new numerical simulating method based on the Extended Distinct Element Method (EDEM) and conducted collapse simulations of the brick masonry house behavior during the shaking table tests. In the numerical simulation model, bricks were assumed to be rigid bodies, and mortar was modeled using a mortar spring that consists of a normal spring and a shear spring. The parameters of each mortar spring were defined based on the results of material tests. Simulated results showed various collapsing processes, and the simulated aspects were found to be similar to the results of the shaking table tests.  相似文献   

Synthesis of coda wave envelopes in randomly inhomogeneous elastic media in a half-space: single scattering model including Rayleigh waves     

Takuto Maeda  Haruo Sato  Takeshi Nishimura 《Geophysical Journal International》2008,172(1):130-154

  相似文献   

Internal differentiation of Kutsugata lava flow from Rishiri Volcano,Japan: Processes and timescales of segregation structures' formation     

Takeshi Kuritani  Takeyoshi Yoshida  Yoshitaka Nagahashi 《Journal of Volcanology and Geothermal Research》2010

Internal differentiation processes in a solidifying lava flow were investigated for the Kutsugata lava flow from Rishiri Volcano in northern Japan. In a representative 6-m thick lava flow that was investigated in detail in this study, segregation products darker than the host lavas manifested mainly in the form of pipes (vesicle cylinders) and layers (vesicle sheets), occurring around 0.5–2.3 m and 2.0–4.0 m above the base, respectively. Both the cylinders and sheets are significantly richer in incompatible elements such as TiO₂ and K₂O than the host lavas, which suggest that these products essentially represent residual melt produced during solidification of the lava flow. Field observation and the geochemical features of the lavas suggest that the vesicle cylinders grew upward from near the base of the flow by continuous feeding of residual melt from the neighboring host lavas to the heads of the cylinders. On the other hand, the vesicle sheets were produced in situ in the solidifying lava flow as fracture veins caused by horizontal compression. The vesicle cylinders have a remarkably higher MgO content (up to 8 wt.%) than the host lava (< 6 wt.%), whereas the vesicle sheets display MgO depletion (as low as 3.5 wt.%). The relatively high MgO content of the vesicle cylinders cannot be explained solely by the mechanical mixing of olivine phenocrysts with the residual melt. It is suggested that the vesicle cylinders were produced by the extraction of olivine-bearing interstitial melt from an augite-plagioclase network in the host lava, whereas the vesicle sheets were formed by the migration of the residual melt from a crystal network consisting of plagioclase, augite, and olivine in the host lava into platy fractures. We infer that this selective crystal fractionation for forming the vesicle cylinders resulted from processes in which abundant vesicles rejected from the upward-migrating floor solidification front prevented olivine crystals from being incorporated into the crystal network in the host lava. The vesicle cylinders are considered to have formed in ∼ 1 day after the lava flow came to rest, while relatively large vesicle sheets (> 1 cm thick) appeared much later (after ∼ 9 days). The formation of these segregation products was essentially complete within 20 days after the lava emplacement.  相似文献