Through an oceanic mixed-layer heat budget analysis, the dominant processes contributing to the largest decay rate (− 0.37 °C/mon) in EP El Nino, the moderate delay rate (− 0.22 °C/mon) in CP El Nino and the smallest decay rate (0.13 °C/mon) in La Nina, are identified. The result shows that both dynamic (wind induced equatorial ocean waves and thermocline changes) and thermodynamic (net surface solar radiation and latent heat flux changes) processes contribute to a fast decay and thus phase transition in EP El Niño composite, whereas the thermodynamic process has less effect on the decay rate for both CP El Niño and La Niña due to the westward shift of sea surface temperature anomaly (SSTA) centers. Thus, the difference in surface wind stress forcing is critical in contributing to evolution asymmetry between CP El Niño and La Niña, while the difference in both the wind stress and heat flux anomalies contribute to evolution asymmetry between EP El Niño and La Niña. It is interesting to note that El Nino induced anomalous anticyclone over the western North Pacific is stronger and shifts more toward the east during EP El Niño than during CP El Niño, while compared to CP El Niño, the center of an anomalous cyclone during La Niña shifts further to the west. As a consequence, both EP and CP El Niño decay fast and transform into a La Niña episode in the subsequent year, whereas La Niña has a much slower decay rate and re-develops in the second year.
Multibeam sonar systems now routinely record seafloor backscatter data, which are processed into backscatter mosaics and angular responses, both of which can assist in identifying seafloor types and morphology. Those data products are obtained from the multibeam sonar raw data files through a sequence of data processing stages that follows a basic plan, but the implementation of which varies greatly between sonar systems and software. In this article, we provide a comprehensive review of this backscatter data processing chain, with a focus on the variability in the possible implementation of each processing stage. Our objective for undertaking this task is twofold: (1) to provide an overview of backscatter data processing for the consideration of the general user and (2) to provide suggestions to multibeam sonar manufacturers, software providers and the operators of these systems and software for eventually reducing the lack of control, uncertainty and variability associated with current data processing implementations and the resulting backscatter data products. One such suggestion is the adoption of a nomenclature for increasingly refined levels of processing, akin to the nomenclature adopted for satellite remote-sensing data deliverables. 相似文献
This paper explores how coastal data and information can be mobilised in information systems and applied in coastal management. The concept of an Information System is defined and described, and the potential role of Local Information System (LIS) in integrated coastal management (ICM) is considered. Three examples, from the Severn Estuary, UK the coast of the North West of England and North Wales, and the Fal and Helford estuaries, are used to demonstrate the requirements of a LIS for coastal areas. The role of GIS as part of the solution is considered in detail. The paper demonstrates how ideas from the disciplines of information systems and information science can be practically applied in coastal areas. The findings promote a holistic approach for those involved in the development of technologies and dealing with data and information about coasts and oceans. 相似文献
The consequences of wildfires are felt in susceptible communities around the globe on an annual basis. Climate change predictions in places like the south-east of Australia and western United States suggest that wildfires may become more frequent and more intense with global climate change. Compounding this issue is progressive urban development at the peri-urban fringe (wildland–urban interface), where continued infrastructure development and demographic changes are likely to expose more people and property to this potentially disastrous natural hazard. Preparing well in advance of the wildfire season is seen as a fundamental behaviour that can both reduce community wildfire vulnerability and increase hazard resilience – it is an important element of adaptive capacity that allows people to coexist with the hazardous environment in which they live. We use household interviews and surveys to build and test a substantive model that illustrates how social cohesion influences the decision to prepare for wildfire. We demonstrate that social cohesion, particularly community characteristics like ‘sense of community’ and ‘collective problem solving’, are community-based resources that support both the adoption of mechanical preparations, and the development of cognitive abilities and capacities that reduce vulnerability and enhance resilience to wildfire. We use the results of this work to highlight opportunities to transfer techniques and approaches from natural hazards research to climate change adaptation research to explore how the impacts attributed to the social components of social–ecological systems can be mitigated more effectively. 相似文献
The Hikurangi Margin is a region of oblique subduction with northwest-dipping intermediate depth seismicity extending southwest from the Kermadec system to about 42°S. The current episode of subduction is at least 16–20 Ma old. The plate convergence rate varies along the margin from about 60 mm/a at the south end of the Kermadec Trench to about 45 mm/a at 42°S. The age of the Pacific lithosphere adjacent to the Hikurangi Trench is not known.The margin divides at about latitude 39°S into two quite dissimilar parts. The northern part has experienced andesitic volcanism for about 18 Ma, and back-arc extension in the last 4 Ma that has produced a back-arc basin onshore with high heaflow, thin crust and low upper-mantle seismic velocities. The extension appears to have arisen from a seawards migration of the Hikurangi Trench north of 39°S. Here the plate interface is thought to be currently uncoupled, as geodetic data indicate extension of the fore-arc basin, and historic earthquakes have not exceededMs=7.South of 39°S there is no volcanism and a back-arc basin has been produced by downward flexure of the lithosphere due to strong coupling with the subducting plate. Heatflow in the basin is normal. Evidence for strong coupling comes from historic earthquakes of up to aboutMs=8 and high rates of uplift on the southeast coast of the North Island.The reason for this division of the margin is not known but may be related to an inferred increase, from northeast to southwest, in the buoyancy of the Pacific lithosphere. 相似文献
The new, greatly expanded internally-consistent dataset of Holland and Powell includes thermodynamic data for a wide range of mineral end-members in common rock-forming minerals, in particular, including FeMg-1 substitutions in glaucophane, garnet, chloritoid and carpholite, and FeMg-1 and MgSiAl-1Al-1 substitutions in talc and chlorite. Moreover, we have the uncertainties and correlations for these data. With the data, we have calculated the full pressure-temperature phase diagram for the system Na2O–FeO–MgO–Al2O3–SiO2–H2O (NFMASH) for quartz (or coesite) and H2O in excess, in the range 300°–800°C and 5–50 kbars. By solving the set of non-linear equations formed by the equilibrium relationships for an independent set of equations between the end-members in an assemblage in NFMASH, the compositions of the minerals (and PT) can be calculated. Thus the changes in MgSiAl-1Al-1 along NMASH reactions, and FeSiAl-1Al-1 along NFASH reactions, are calculated, and the changes in FeMg-1 and MgSiAl-1Al-1 along NFMASH reactions are calculated. From this information it is straightforward to generate PT diagrams for specific rock compositions. Mineral assemblages and mineral compositional changes in the phase diagram are discussed in relation to greenschist, blueschist and eclogite facies assemblages in metapelitic rocks. It is found that the correspondence between the predictions of the phase diagrams and the observations on rocks is remarkably good. When semiquantitative extensions of the phase diagram to include Ca(MgFe)-1, NaSiCa-1Al-1, Fe3+Al-1 and KNa-1 substitutions are taken into account the agreement is essentially complete. 相似文献
New data from a geochemical, geochronological and isotopic study of the Late Precambrian Timna igneous complex suggest the formation of alkali granites from a LIL-enriched, mantle derived, sanukitoid-type monzodiorite (a silica oversaturated rock with Mg# >60). These data also provide new insights into the petrology, timing and regional tectonic control of the transition from the calc-alkaline to the alkaline magmatic activity in the northern Arabian-Nubian Shield (ANS) during the Late Precambrian.
The Timna alkali granite was formed by fractional crystallization from the monzodioritic magma in a quasi-stratified magmatic cell which formed 610 Ma ago in the 625 Ma old calc-alkaline, porphyritic granite crust. These monzodiorites are mantle-derived, as demonstrated by their high Mg# (63), Cr (230 ppm), and Ni (120 ppm). They are characterized by initial 87Sr/86Sr of 0.7034, ε-Nd (610 Ma) = +3.4, and are enriched in K2O (2.9%), Sr (840 ppm), Ba (1290 ppm) and LREE [(La/Lu)n= 10–25]. The chemical characteristics and REE patterns of the monzodiorites and andesitic dykes of Timna are very similar to Dokhan andesites from northeastern Egypt and the Archean sanukitoids from Canada. The isotopic, geochemical and geochronologic data all indicate that Timna monzodiorites are comagmatic with the alkali granite. The alkali granite is a typical post-orogenic, borderline A-type granite. It is enriched in potassium (K2O=4.68–6.64%), has a negative europium anomaly (Eu/Eu*=0.058–0.38) and ε-Nd (610 Ma) of +3.9. The calc-alkaline granite is a typical I-type granite with a small positive europium anomaly (Eu/Eu*=1.02–1.16). Its age and the Sr, Nd and Pb isotopic characteristics with ε-Nd (625 Ma) of +5.6 to +5.9 are significantly different from these of the alkali granite and monzodiorites, and indicate little interaction with the monzodiorite during the formation of the alkali granite.
The alkali granites are correlative with the post-collisional extensional granites in Jordan and Egypt while the porphyritic granites can be correlated with the late orogenic types. Crustal thickening associated with orogenic compression resulted in crustal anatexis to form the I-type granitic rocks, whereas crustal thinning associated with extension allowed LIL-enriched mantle melts to rise very near to the surface, where space was available for these to pond and fractionate to alkali granite. 相似文献
Extensive placer gold deposits occur in Quaternary palaeochannels in the Ampalit and Cempaga Buang drainage basins near Kasongan, Central Kalimantan, Indonesia. Broad interfluvial Pleistocene terraces surrounding the drainages also contain significant amounts of placer gold. The “channel” and “terrace” gold deposits together cover an area in excess of 180 km2.Exploration for gold at Ampalit followed traditional alluvial methods, and assumed that mechanical and gravitational factors were the principal mechanisms affecting gold accumulation and concentration. Gold was considered to be physically reworked from terraces and redeposited in the present drainage channels or underlying, laterally displaced, palaeochannels. However, a comparison of gold grains from the Ampalit drainage channel and adjacent terraces indicates that gold grains in the drainage channels are possibly of colloidal origin and not mechanically transported to their present domain.The morphology of gold grains from the Ampalit drainage is compared with grains from adjacent terraces, using scanning electron microscopy and atomic force microscopy. The latter procedure allows for nondestructive analysis to give true three dimensional surface topography down to nanometre resolution. Evidence from force microscopy supports a colloidal origin for gold aggregates.The average purity of gold produced from the Ampalit dredging operation is 970 fine (970/1000) and the majority of examined gold grains extracted from beneath the drainage channel have a purity of 998 fine. This unusually high degree of purity suggests a selective dissolution/aggregation mechanism. We propose that gold is transported downward and laterally in groundwater percolating through the terrace sands and gravels to the current drainage as a humic acid-stabilised colloid. As the pregnant groundwater migrates toward the present drainage channels, it encounters a sleep chemical gradient and the colloid aggregates. The aggregation process occurs near clay zones within palaeochannel sands and gravels beneath the present river sediments. Here the colloidal aggregates form small grains (usually <1 mm) of extremely high purity.Today, the inherently unstable gold deposits at Ampalit are in a state of both aggregation and dissolution. Identification of low energy zones, location of point bar lags in palaeo and recent drainage channels, and the extrapolation of areas of low energy are not solely valid as exploration guides for gold accumulation in this environment. Exploration methods that also recognise ground water migration and composition, and the geochemical controls of dissolution and aggregation, will improve the ability to identify ore accumulations, thus contributing to improved economics of mining these deposits. 相似文献
