Regional Characteristics and Causes of Haze Events in Northeast China     

Weiwei Chen  Shichun Zhang  Quansong Tong  Xuelei Zhang  Hongmei Zhao  Siqi Ma  Aijun Xiu  Yuexin He 《中国地理科学(英文版)》2018,28(5):836-850

Northeast China experiences severe atmospheric pollution, with an increasing occurrence of heavy haze episodes. However, the underlying forces driving haze formation during different seasons are poorly understood. In this study, we explored the spatio-temporal characteristics and causes of haze events in Northeast China by combining a range of data sources(i.e., ground monitoring, satellite-based products, and meteorological products). It was found that the ‘Shenyang-Changchun-Harbin(SCH)'city belt was the most polluted area in the region on an annual scale. The spatial distribution of air quality index(AQI) values had a clear seasonality, with the worst pollution occurring in winter, an approximately oval-shaped polluted area around western Jilin Province in spring, and the best air quality occurring in summer and most of the autumn. The three periods that typically experienced intense haze events were Period I from mid-October to mid-November(i.e., late autumn and early winter), Period II from late-December to February(i.e., the coldest time in winter), and Period III from April to mid-May(i.e., spring). During Period I, strong PM_(2.5) emissions from seasonal crop residue burning and coal burning for winter heating were the dominant reasons for the occurrence of extreme haze events(AQI 300). Period II had frequent heavy haze events(200 AQI 300) in the coldest months of January and February, which were due to high PM_(2.5) emissions from coal burning and vehicle fuel consumption, a lower atmospheric boundary layer, and stagnant atmospheric conditions. Haze events in Period III, with high PM_(10) concentrations, were primarily caused by the regional transportation of windblown dust from degraded grassland in central Inner Mongolia and bare soil in western Jilin Province. Local agricultural tilling could also release PM_(10) and enhance the levels of windblown dust from tilled soil. Better control of coal burning, fuel consumption, and crop residue burning in winter and autumn is urgently needed to address the haze problem in Northeast China.  相似文献   

Soil and Vegetation Spectral Coupling Difference (SVSCD) for Minerals Extraction from Hyperion Data in Vegetation Covered Area     

Shengbo Chen  Shuang Huang  Yanli Liu  Chao Zhou 《中国地理科学(英文版)》2018,28(6):957-972

Remote sensing data have been widely applied to extract minerals in geologic exploration, however, in areas covered by vegetation, extracted mineral information has mostly been small targets bearing little information. In this paper, we present a new method for mineral extraction aimed at solving the difficulty of mineral identification in vegetation covered areas. The method selected six sets of spectral difference coupling between soil and plant (SVSCD). These sets have the same vegetation spectra reflectance and a maximum different reflectance of soil and mineral spectra from Hyperion image based on spectral reflectance characteristics of measured spectra. The central wavelengths of the six, selected band pairs were 2314 and 701 nm, 1699 and 721 nm, 1336 and 742 nm, 2203 and 681 nm, 2183 and 671 nm, and 2072 and 548 nm. Each data set’s reflectance was used to calculate the difference value. After band difference calculation, vegetation information was suppressed and mineral abnormal information was enhanced compared to the scatter plot of original band. Six spectral difference couplings, after vegetation inhibition, were arranged in a new data set that requires two components that have the largest eigenvalue difference from principal component analysis (PCA). The spatial geometric structure features of PC1 and PC2 was used to identify altered minerals by spectral feature fitting (SFF). The collecting rocks from the 10 points that were selected in the concentration of mineral extraction were analyzed under a high-resolution microscope to identify metal minerals and nonmetallic minerals. Results indicated that the extracted minerals were well matched with the verified samples, especially with the sample 2, 4, 5 and 8. It demonstrated that the method can effectively detect altered minerals in vegetation covered area in Hyperion image.  相似文献   

Analysis of the exoplanet containing system Kepler-13     

E.?Budding  M.?D.?RhodesEmail author 《Astrophysics and Space Science》2018,363(3):60

We have applied the close binary system analysis program WinFitter, with its physically detailed fitting function, to an intensive study of the complex multiple system Kepler-13 using photometry data from all 13 short cadence quarters downloaded from the NASA Exoplanet Archive (NEA) (http://exoplanetarchive.ipac.caltech.edu). The data-point error of our normalized, phase-sequenced and binned (380 points per bin: 0.00025 phase interval) flux values, at 14 ppm, allows the model’s specification for the mean reference flux level of the system to a precision better than 1 ppm. Our photometrically derived values for the mass and radius of KOI13.01 are \(6.8\pm0.6~\mbox{M}_{\mathrm{J}}\) and \(1.44\pm0.04~\mbox{R}_{\mathrm{J}}\). The star has a radius of \(1.67\pm0.05~\mbox{R}_{\odot}\). Our modelling sets the mean of the orbital inclination \(i\) at \(94.35\pm0.14^{\circ}\), with the star’s mean precession angle \(\phi_{p}\)—\(49.1\pm5.0^{\circ}\) and obliquity \(\theta_{o}\)\(67.9 \pm 3.0^{\circ}\), though there are known ambiguities about the sense in which such angles are measured.Our findings did not confirm secular variation in the transit modelling parameters greater than their full correlated errors, as argued by previous authors, when each quarter’s data was best-fitted with a determinable parameter set without prejudice. However, if we accept that most of the parameters remain the same for each transit, then we could confirm a small but steady diminution in the cosine of the orbital inclination over the 17 quarter timespan. This is accompanied by a slight increase of the star’s precession angle (less negative), but with no significant change in the obliquity of its spin axis. There are suggestions of a history of strong dynamical interaction with a highly distorted planet rotating in a 3:2 resonance with its revolution, together with a tidal lag of \(\sim30~\mbox{deg}\). The mean precessional period is derived to be about 1000 y, but at the present time the motion of the star’s rotation axis appears to be supporting the gravitational torque, rather than providing the balance against it that would be expected over long periods of time.The planet has a small but detectable backwarming effect on the star, which helps to explain the difference in brightness just after transit and just before occultation eclipses. In assessing these findings it is recognized that sources of uncertainty remain, notably with possible inherent micropulsational effects, variations from other components of the multiple star, stellar activity, differential rotation and the neglect of higher order terms (than \(r_{1}^{5}\)) in the fitting function, where \(r_{1}\) is the ratio of the radius of the star to the mean orbital separation of planet and host star.  相似文献   

Element sets for high-order Poincaré mapping of perturbed Keplerian motion     

David J. Gondelach  Roberto Armellin 《Celestial Mechanics and Dynamical Astronomy》2018,130(10):65

The propagation and Poincaré mapping of perturbed Keplerian motion is a key topic in Celestial Mechanics and Astrodynamics, e.g., to study the stability of orbits or design bounded relative trajectories. The high-order transfer map (HOTM) method enables efficient mapping of perturbed Keplerian orbits using the high-order Taylor expansion of a Poincaré or stroboscopic map. The HOTM is only accurate close to the expansion point and therefore the number of revolutions for which the map is accurate tends to be limited. The proper selection of coordinates is of key importance for improving the performance of the HOTM method. In this paper, we investigate the use of different element sets for expressing the high-order map in order to find the coordinates that perform best in terms of accuracy. A new set of elements is introduced that enables extremely accurate mapping of the state, even for high eccentricities and higher-order zonal perturbations. Finally, the high-order map is shown to be very useful for the determination and study of fixed points and center manifolds of Poincaré maps.  相似文献   

Explicit stress–strain equations for modeling frictional materials     

Kenneth J. Xu  Martin D. Liu  Buddhima Indraratna 《Marine Georesources & Geotechnology》2018,36(6):722-734

In this paper, a comprehensive study on simulating the shearing behavior of frictional materials is performed. A set of two explicit equations, describing the relationship among the shear stress ratio and the distortional strain and the volumetric strain, are formulated independently. The equations contain three stress parameters and three strain parameters and another parameter representing the nonuniformity of stress and strain during softening. All the parameters have clear physical significance and can be determined experimentally. It is demonstrated that the proposed equations have the capacity of simulating the complicated shearing behavior of many types of frictional materials including geomaterials. The proposed equations are used to simulate the stress–strain behavior for 27 frictional materials with 98 tests. These materials include soft and stiff clays in both reconstituted and structured states, silicon sands and calcareous sands, silts, compacted fill materials, volcanic soils, decomposed granite soils, cemented soils (both artificially and naturally cemented), partially saturated soils, ballast, rocks, reinforced soils, tire chips, sugar, wheat, and rapeseed. It has been demonstrated that the proposed explicit constitutive equations have the capacity to capture accurately the shearing behavior of frictional materials both qualitatively and quantitatively. A study on model parameters has been performed.  相似文献   

Compression reference of soil structure evaluation with reconstituted clays at different initial water contents     

Ling-Ling Zeng  Zhen-Shun Hong  Yu-Jun Cui  Martin D. Liu 《Marine Georesources & Geotechnology》2018,36(7):759-767

  相似文献   

Studies on the Application of Steady State Assumption in 1DV Model for the Estimation of Settling Velocity of Suspended Sediments in a Shallow Estuary     

K. L. Priya 《Ocean Science Journal》2018,53(3):449-459

Settling velocity is one of the important parameters in sediment transport modeling of estuaries. The methods adopted for its determination vary from theoretical equations to experimental methods. The theoretical equation generally adopted in the 1DV model include assumptions in order to simplify the solution. It is generally assumed that either the condition is steady or the vertical diffusion is negligible. This study evaluated the relative importance of the two assumptions made for the estimation of settling velocity. Two approaches were adopted: unsteady and negligible vertical diffusion (NS-NVD) and steady with vertical diffusion (S-VD) to estimate the settling velocity. The Muthupet Estuary in the Coromandal coast of India was selected for the study. The S-VD approach estimated settling velocity fairly well at the two locations with appreciable vertical diffusion. The NS-NVD approach was observed to be superior for estimating settling velocity at shallow reaches of the estuary having low flow velocity. The calculated settling velocity was further applied in 1DV model to predict the suspended sediment concentration. The S-VD approach predicted suspended sediment concentration at those locations with appreciable vertical diffusion with an R² value of 0.82 against 0.67 for the NS-NVD approach. At the other shallow reach of the estuary with low flow velocity, the NS-NVD approach gave an R² value of 0.822 against 0.71 for the S-VD approach. The vertical diffusion was observed to play a secondary role at those locations which are shallow with a water depth of 0.6 m and with a low flow velocity of the order of 0.01 m/s. The study demonstrated that localized hydrodynamic conditions influence the method adopted for the estimation of settling velocity.  相似文献   

Exact solution of anisotropic compact stars via mass function     

S. K. Maurya  Ayan Banerjee  Y. K. Gupta 《Astrophysics and Space Science》2018,363(10):208

Studying relativistic compact objects is important in modern astrophysics to understand several astrophysical issues. It is therefore natural to ask for an internal structure and physical properties of specific classes of compact stars from astrophysical observations. We obtain a class of new relativistic solutions with anisotropic distribution of matter for compact stars. More specifically, stellar models, described by an anisotropic fluid, establishing a relation between metric potentials and generating a specific form of mass function, are explicitly constructed within the framework of General Relativity. New solutions can be used to model compact objects, which adequately describe compact strange star candidates like SMC X-1, Her X-1 and 4U 1538-52, with observational data taken from Gangopadhyay et al. (Mon. Not. R. Astron. Soc. 431:3216, 2013). As a possible astrophysical application the obtained solutions could explain the physics of selfgravitating objects, and might be useful for strong-field regimes where data are currently inadequate.  相似文献   

Determination of Non-gravitational Effects in the Motion of Near-Sun Objects 321P, 322P, 323P,and 342P     

V.?V.?Emel’yanenkoEmail author  S.?A.?Naroenkov 《Solar System Research》2018,52(1):64-68

At the beginning of this century, the SOHO space observatory discovered near-Sun comets with perihelion distances q ≈ 0.05 AU, which remained observable over several close encounters with the Sun. This became one of the surprises in studying the small bodies of the Solar System. Currently, there are objects that have already been observed in four (342P) and five (321P, 322P, and 323P) apparitions. In the present work, the estimates of nongravitational effects are obtained for these objects based on the pair-wise linkage of the apparitions. The calculations show that the observations of these objects are poorly represented if solely the gravitational forces are considered. The magnitude of nongravitational effects in the semimajor axis noticeably changes with time. The motion of all comets is significantly affected by the components of nongravitational forces that are perpendicular to the orbital plane.  相似文献   

Wetlands and low-gradient topography are associated with longer hydrologic transit times in Precambrian Shield headwater catchments     

Daniel Lane  Colin P.R. McCarter  Murray Richardson  Chris McConnell  Tim Field  Huaxia Yao  George Arhonditsis  Carl P.J. Mitchell 《水文研究》2020,34(3):598-614

The estimation of hydrologic transit times in a catchment provides insights into the integrated effects of water storage, mixing dynamics, and runoff generation processes. There has been limited effort to estimate transit times in southern boreal Precambrian Shield landscapes, which are characteristically heterogeneous with surface cover including till, thin soils, bedrock outcrops, and depressional wetland features that play contrasting hydrologic roles. This study presents approximately 3.5 years of precipitation and streamflow water isotope data and estimates mean transit times (MTTs) and the young water fraction (p_y) across six small catchments in the Muskoka-Haliburton region of south-central Ontario. The main objectives were to define a typical range of MTTs for headwater catchments in this region and to identify landscape variables that best explain differences in MTTs/p_y using airborne light detection and ranging and digital terrain analysis. Of the transit time distributions, the two parallel linear reservoir and gamma distributions best describe the hydrology of these catchments, particularly because of their ability to capture more extreme changes related to events such as snowmelt. The estimated MTTs, regardless of the modelling approach or distribution used, are positively associated with the percent wetland area and negatively with mean slope in the catchments. In this landscape, low-gradient features such as wetlands increase catchment scale water storage when antecedent conditions are dryer and decrease transit times when there is a moisture surplus, which plausibly explains the increases in MTTs and mean annual runoff from catchments with significant coverage of these landscape features.  相似文献