Immobilization of copper under an acid leach of colloidal pyrite waste rocks by a fixed-bed column     

Yan Yang  Tianhu Chen  Ping Li  Chengsong Qing  Qiaoqin Xie  Xinmin Zhan 《Environmental Earth Sciences》2016,75(3):205

Colloidal pyrite waste rocks (CPWR) which are mainly composed of colloidal pyrite and siderite widely deposit in sulfide mines in the middle and lower reaches of the Yangtze River belt, China, especially in Tongling City, Anhui Province, China. In this paper, a fixed-bed column was used to investigate the weathering and oxidation of CPWR and its role in immobilizing low-concentration Cu (10 mg L^?1) under weakly acidic leach (pH = 5.0). The experimental results indicated that the breakthrough capacity was around 14.0 mg Cu g^?1 CPWR when Cu²⁺ breakthrough concentration was 0.5 mg L^?1. Sequential extraction of Cu and dithionite–citrate–bicarbonate extraction of free iron in the used CPWR after the column breakthrough indicated that Cu removal by CPWR consisted of the following processes: oxidation of pyrite and dissolution of siderite in CPWR, ferrous oxidation, and adsorption of Cu on ferric (hydr)oxides. This study shows the potential application of CPWR as an effective sorbent for the removal of low-concentration Cu from acid mine drainage.  相似文献   

The soil leakage ratio in the Mudu watershed,China   总被引：3，自引：0，他引：3  

Xingping Wei  Yaner Yan  Deti Xie  Jiupai Ni  Hugo A. Loáiciga 《Environmental Earth Sciences》2016,75(8):721

  相似文献   

Assessment of seismic impact on residences during blasting excavation of a large-scale rock slope in China     

Peng Yan  Yujun Zou  Junru Zhou  Wenbo Lu  Yuzhu Zhang  Liang Liu 《Environmental Earth Sciences》2016,75(11):949

  相似文献   

基于SERD与SPAN的全极化SAR数据海岸线分类          下载免费PDF全文

周振明  王文生  周惠慧 《海洋测绘》2016,(2):34-38

基于Wishart分类器的全极化SAR图像H/α分类方法应用于海岸线分类,可区分不同海岸线类型。在聚类过程中,传统H/α-Wishart方法时常将各类聚类中心对应的散射机理混淆,使得同为单次面散射的淤泥质与砂质海岸线类别难以区分。针对此问题,提出了改进型的辅助分层分类方法。算法运用单次反射特征值相对差异度与极化总功率系数构成的二维特征空间,结合支持向量机得到最优分界判据,以分离初始分类结果中混淆的淤泥质与砂质海岸线。实验表明,改进方法能够有效区分淤泥质与砂质岸线,分类混淆矩阵对应kappa系数由0.794提升至0.853,分类识别率得到显著提高。  相似文献   

Development and Extension of An Aggregated Scale Model: Part 1 – Background to ASMITA     

Ian TOWNEND  Zheng Bing WANG  Marcel STIVE  Zeng ZHOU 《海洋工程》2016,(4):483-504

Whilst much attention has been given to models that describe wave, tide and sediment transport processes in sufficient detail to determine the local changes in bed level over a relatively detailed representation of the bathymetry, far less attention has been given to models that consider the problem at a much larger scale (e.g. that of geomorphological elements such as a tidal flat and tidal channel). Such aggregated or lumped models tend not to represent the processes in detail but rather capture the behaviour at the scale of interest. One such model developed using the concept of an equilibrium concentration is the Aggregated Scale Morphological Interaction between Tidal basin and Adjacent coast (ASMITA). In this paper we provide some new insights into the concepts of equilibrium, and horizontal and vertical exchange that are key components of this modelling approach. In a companion paper, we summarise a range of developments that have been undertaken to extend the original model concept, to illustrate the flexibility and power of the conceptual framework. However, adding detail progressively moves the model in the direction of the more detailed process-based models and we give some consideration to the boundary between the two.  相似文献   

Hybrid N-order Lagrangian Interpolation Eulerian?Lagrangian Method for Salinity Calculation     

吴炎成  朱首贤  周林  游小宝  张文静 《海洋工程》2016,(2):283-295

The Eulerian?Lagrangian method (ELM) has been used by many ocean models as the solution of the advection equation, but the numerical error caused by interpolation imposes restriction on its accuracy. In the present study, hybrid N-order Lagrangian interpolation ELM (LiELM) is put forward in which the N-order Lagrangian interpolation is used at first, then the lower order Lagrangian interpolation is applied in the points where the interpolation results are abnormally higher or lower. The calculation results of a step-shaped salinity advection model are analyzed, which show that higher order (N=3?8) LiELM can reduce the mean numerical error of salinity calculation, but the numerical oscillation error is still significant. Even number order LiELM makes larger numerical oscillation error than its adjacent odd number order LiELM. Hybrid N-order LiELM can remove numerical oscillation, and it significantly reduces the mean numerical error when N is even and the current is in fixed direction, while it makes less effect on mean numerical error when N is odd or the current direction changes periodically. Hybrid odd number order LiELM makes less mean numerical error than its adjacent even number order LiELM when the current is in the fixed direction, while the mean numerical error decreases as N increases when the current direction changes periodically, so odd number of N may be better for application. Among various types of Hybrid N-order LiELM, the scheme reducing N-order directly to 1st-order may be the optimal for synthetic selection of accuracy and computational efficiency.  相似文献   

Failure Pressure Analysis of Corroded Moderate-to-High Strength Pipelines     

苏晨亮  李昕  周晶 《海洋工程》2016,(1):69-82

Based on the elastic-plastic, large-deformation finite element method, burst capacity of steel pipeline with longitudinal corrosion defect subjected to internal pressure is studied. The appropriate stress-based criterion is used to predict the failure pressure of finite element model of corroded pipeline under internal pressure. By considering the pipe steel grades and geometries of corrosion defects, a series of finite element analyses is conducted. The effects of corrosion depth, length and width on burst capacity are also discussed. A specific failure pressure solution for the assessment of corrosion defects in moderate-to-high strength pipeline is proposed on the base of numerical results. The failure pressures predicted by the proposed method are in better agreement with the experimental results than the results by the other methods.  相似文献   

腐蚀管道在内压和轴向压力影响下的弯曲破坏     

高杰  李昕  周晶 《海洋工程》2016,34(6):74-82

运行在恶劣环境中的海底管道,往往受到内压、轴力和弯矩等复杂荷载的联合作用。腐蚀会导致管壁局部变薄,降低管道极限承载力。为保证管道安全高效运行,准确预测和分析复杂荷载作用下的塑性极限承载力和变形行为就显得尤为重要。考虑大应变和大变形、应力强化和材料非线性,运用数值仿真软件建立腐蚀缺陷管道的三维实体有限元模型,在全尺寸管道破坏试验验证的基础上,对腐蚀管道在内压、轴向压力和弯矩相互作用下的失效模式和极限弯矩承载力进行了相关研究,并进行了腐蚀缺陷几何参数的敏感性分析。研究结果表明:初始内压和初始轴向压力会显著降低腐蚀管道的极限弯矩承载力,并且影响最终的失效模式;在腐蚀缺陷几何尺寸参数中,腐蚀宽度比腐蚀深度和腐蚀长度的影响更大。  相似文献   

漠河盆地多年冻土区天然气水合物地球化学调查及远景评价     

张富贵  唐瑞玲  杨志斌  朱敬华  周亚龙  孙忠军 《现代地质》2018,32(5):1003

漠河盆地是我国冻土发育的主要地区之一,发育良好的天然气水合物成藏系统,具有天然气水合物形成的良好条件。为了圈定天然气水合物远景区,识别油气聚集体,判别天然气水合物成因,在漠河盆地冻土较发育地区开展了1∶5万天然气水合物地球化学资源调查。结果表明：(1)在森林沼泽景观区,顶空气和荧光光谱指标是天然气水合物勘查的主要指标,借鉴青海木里冻土区天然气水合物地球化学勘查成功的经验,结合AMT、地质等资料分析,元宝山凹陷是天然气水合物较为有利的远景区;(2)岩心样品甲烷碳同位素分析显示,烃类气体分异明显,浅层烃类气体基本为生物气,深部烃类气源主要为混合成因气,个别解吸气为微生物气和热解气;(3)试验性应用了分形-GIS技术,可以细致可靠地进行异常区范围划定,消除干扰因素,有效地圈定水合物远景区。  相似文献   

New Zircon U‐Pb Age of Granodiorite in Chifeng at the Northern Margin of North China Craton and Constraints on Plate Tectonic Evolution     

CHEN Jingsheng  LI Bin  YANG Hao  LIU Miao  YANG Fan  LI Wei  WANG Yan  CUI Tianri 《《地质学报》英文版》2018,92(1):410-413

正Objective The North China Craton(NCC)is one of the oldest cratons in the world.The accretionary belt at its northern margin has been the focus of scholars both at home and abroad(Zhu Junbing and Ren Jishun,2017).In recent years,a series of Late Paleozoic–Mesozoic intrusions trending E–W have been discovered within the northern margin of the NCC,forming a magmatic belt.The study  相似文献